Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "This is the first set of bugfixes for ARM SoCs, fixing a couple of
  stability problems, mostly on TI OMAP and Rockchips platforms:

   - OMAP2 hwmod clocks must be enabled in the correct order

   - OMAP3 Wakeup from resume through PRM IRQ was unreliable

   - one regression on OMAP5 caused by a kexec fix

   - Rockchip ethernet needs some settings for stable operation on
     Rock64

   - Rockchip based Chrombook Plus needs another clock setting for
     stable display suspend/resume

   - Rockchip based phyCORE-RK3288 was able to run at an invalid CPU
     clock frequency

   - Rockchip MMC link was sometimes unreliable

   - multiple fixes to avoid crashes in the Broadcom STB DPFE driver

  Other minor changes include:

   - Devicetree fixes for incorrect hardware description (rockchip,
     omap, Gemini, amlogic)

   - some MAINTAINER file updates to correct email and git addresses

   - some fixes addressing 'make W=1' dtc warnings (broadcom, amlogic,
     cavium, qualcomm, hisilicon, zx)

   - fixes for LTO-compilation (orion, davinci, clps711x)

   - one fix for an incorrect Kconfig errata selection

   - a memory leak in the OMAP timer driver

   - a kernel data leak in OMAP1 debugfs files"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  MAINTAINERS: update entries for ARM/STM32
  ARM: dts: bcm283x: Move arm-pmu out of soc node
  ARM: dts: bcm283x: Fix unit address of local_intc
  ARM: dts: NSP: Fix amount of RAM on BCM958625HR
  ARM: dts: Set D-Link DNS-313 SATA to muxmode 0
  ARM: omap2: set CONFIG_LIRC=y in defconfig
  ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS
  memory: brcmstb: dpfe: support new way of passing data from the DCPU
  memory: brcmstb: dpfe: fix type declaration of variable "ret"
  memory: brcmstb: dpfe: properly mask vendor error bits
  ARM: BCM: dts: Remove leading 0x and 0s from bindings notation
  ARM: orion: fix orion_ge00_switch_board_info initialization
  ARM: davinci: mark spi_board_info arrays as const
  ARM: clps711x: mark clps711x_compat as const
  arm: zx: dts: Remove leading 0x and 0s from bindings notation
  arm64: dts: Remove leading 0x and 0s from bindings notation
  arm64: dts: cavium: fix PCI bus dtc warnings
  MAINTAINERS: ARM: at91: update my email address
  soc: imx: gpc: de-register power domains only if initialized
  ARM: dts: rockchip: Fix DWMMC clocks
  ...

MAINTAINERS

@@ -1238,7 +1238,7 @@ F:	drivers/clk/at91
 
 ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
 M:	Nicolas Ferre <nicolas.ferre@microchip.com>
-M:	Alexandre Belloni <alexandre.belloni@free-electrons.com>
+M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.linux4sam.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91.git
@@ -1590,7 +1590,7 @@ ARM/Marvell Dove/MV78xx0/Orion SOC support
 M:	Jason Cooper <jason@lakedaemon.net>
 M:	Andrew Lunn <andrew@lunn.ch>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
-M:	Gregory Clement <gregory.clement@free-electrons.com>
+M:	Gregory Clement <gregory.clement@bootlin.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/soc/dove/
@@ -1604,7 +1604,7 @@ F:	arch/arm/boot/dts/orion5x*
 ARM/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K SOC support
 M:	Jason Cooper <jason@lakedaemon.net>
 M:	Andrew Lunn <andrew@lunn.ch>
-M:	Gregory Clement <gregory.clement@free-electrons.com>
+M:	Gregory Clement <gregory.clement@bootlin.com>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -1999,8 +1999,10 @@ M:	Maxime Coquelin <mcoquelin.stm32@gmail.com>
 M:	Alexandre Torgue <alexandre.torgue@st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32.git stm32-next
 N:	stm32
+F:	arch/arm/boot/dts/stm32*
+F:	arch/arm/mach-stm32/
 F:	drivers/clocksource/armv7m_systick.c
 
 ARM/TANGO ARCHITECTURE

arch/arm/boot/dts/bcm11351.dtsi

@@ -55,7 +55,7 @@ gic: interrupt-controller@3ff00100 {
 		      <0x3ff00100 0x100>;
 	};
 
-	smc@0x3404c000 {
+	smc@3404c000 {
 		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
 		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
 	};

arch/arm/boot/dts/bcm21664.dtsi

@@ -55,7 +55,7 @@ gic: interrupt-controller@3ff00100 {
 		      <0x3ff00100 0x100>;
 	};
 
-	smc@0x3404e000 {
+	smc@3404e000 {
 		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
 		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
 	};

arch/arm/boot/dts/bcm2835.dtsi

@@ -18,10 +18,10 @@ cpu@0 {
 	soc {
 		ranges = <0x7e000000 0x20000000 0x02000000>;
 		dma-ranges = <0x40000000 0x00000000 0x20000000>;
+	};
 
-		arm-pmu {
-			compatible = "arm,arm1176-pmu";
-		};
+	arm-pmu {
+		compatible = "arm,arm1176-pmu";
 	};
 };
 

arch/arm/boot/dts/bcm2836.dtsi

@@ -9,19 +9,19 @@ soc {
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc {
+		local_intc: local_intc@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			interrupt-parent = <&local_intc>;
 		};
+	};
 
-		arm-pmu {
-			compatible = "arm,cortex-a7-pmu";
-			interrupt-parent = <&local_intc>;
-			interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
-		};
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
 	timer {

arch/arm/boot/dts/bcm2837.dtsi

@@ -8,7 +8,7 @@ soc {
 			 <0x40000000 0x40000000 0x00001000>;
 		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
 
-		local_intc: local_intc {
+		local_intc: local_intc@40000000 {
 			compatible = "brcm,bcm2836-l1-intc";
 			reg = <0x40000000 0x100>;
 			interrupt-controller;

arch/arm/boot/dts/bcm283x.dtsi

@@ -465,7 +465,7 @@ thermal: thermal@7e212000 {
 			status = "disabled";
 		};
 
-		aux: aux@0x7e215000 {
+		aux: aux@7e215000 {
 			compatible = "brcm,bcm2835-aux";
 			#clock-cells = <1>;
 			reg = <0x7e215000 0x8>;

arch/arm/boot/dts/bcm958625hr.dts

@@ -49,7 +49,7 @@ chosen {
 
 	memory {
 		device_type = "memory";
-		reg = <0x60000000 0x80000000>;
+		reg = <0x60000000 0x20000000>;
 	};
 
 	gpio-restart {

arch/arm/boot/dts/gemini-dlink-dns-313.dts

@@ -269,7 +269,7 @@ conf7 {
 
 		sata: sata@46000000 {
 			/* The ROM uses this muxmode */
-			cortina,gemini-ata-muxmode = <3>;
+			cortina,gemini-ata-muxmode = <0>;
 			cortina,gemini-enable-sata-bridge;
 			status = "okay";
 		};

arch/arm/boot/dts/imx6dl-icore-rqs.dts

@@ -42,7 +42,7 @@
 
 /dts-v1/;
 
-#include "imx6q.dtsi"
+#include "imx6dl.dtsi"
 #include "imx6qdl-icore-rqs.dtsi"
 
 / {

arch/arm/boot/dts/logicpd-som-lv.dtsi

@@ -71,6 +71,8 @@ nand@0,0 {
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -189,7 +191,12 @@ OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
 		>;
 	};
 
-
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+		>;
+	};
 };
 
 &omap3_pmx_wkup {

arch/arm/boot/dts/logicpd-torpedo-som.dtsi

@@ -66,6 +66,8 @@ nand@0,0 {
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -136,6 +138,12 @@ OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0)	/* hsusb0_data6.hsusb0_data6 */
 			OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0)	/* hsusb0_data7.hsusb0_data7 */
 		>;
 	};
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)        /* i2c1_scl.i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)        /* i2c1_sda.i2c1_sda */
+		>;
+	};
 };
 
 &uart2 {

arch/arm/boot/dts/omap5-uevm.dts

@@ -47,7 +47,7 @@ btn1 {
 			gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;	/* gpio3_83 */
 			wakeup-source;
 			autorepeat;
-			debounce_interval = <50>;
+			debounce-interval = <50>;
 		};
 	};
 

arch/arm/boot/dts/rk3036.dtsi

@@ -280,7 +280,7 @@ sdio: dwmmc@10218000 {
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		resets = <&cru SRST_SDIO>;
@@ -298,7 +298,7 @@ emmc: dwmmc@1021c000 {
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		default-sample-phase = <158>;
 		disable-wp;
 		dmas = <&pdma 12>;

arch/arm/boot/dts/rk322x.dtsi

@@ -621,7 +621,7 @@ sdmmc: dwmmc@30000000 {
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
@@ -634,7 +634,7 @@ sdio: dwmmc@30010000 {
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
@@ -649,7 +649,7 @@ emmc: dwmmc@30020000 {
 		max-frequency = <37500000>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		bus-width = <8>;
 		default-sample-phase = <158>;
 		fifo-depth = <0x100>;

arch/arm/boot/dts/rk3288-phycore-som.dtsi

@@ -110,26 +110,6 @@ vdd_misc_1v8: vdd-misc-1v8 {
 	};
 };
 
-&cpu0 {
-	cpu0-supply = <&vdd_cpu>;
-	operating-points = <
-		/* KHz    uV */
-		1800000	1400000
-		1608000	1350000
-		1512000 1300000
-		1416000 1200000
-		1200000 1100000
-		1008000 1050000
-		 816000 1000000
-		 696000  950000
-		 600000  900000
-		 408000  900000
-		 312000  900000
-		 216000  900000
-		 126000  900000
-	>;
-};
-
 &emmc {
 	status = "okay";
 	bus-width = <8>;

arch/arm/boot/dts/zx296702.dtsi

@@ -56,7 +56,7 @@ global_timer: timer@8000200 {
 			clocks = <&topclk ZX296702_A9_PERIPHCLK>;
 		};
 
-		l2cc: l2-cache-controller@0x00c00000 {
+		l2cc: l2-cache-controller@c00000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00c00000 0x1000>;
 			cache-unified;
@@ -67,30 +67,30 @@ l2cc: l2-cache-controller@0x00c00000 {
 			arm,double-linefill-incr = <0>;
 		};
 
-		pcu: pcu@0xa0008000 {
+		pcu: pcu@a0008000 {
 			compatible = "zte,zx296702-pcu";
 			reg = <0xa0008000 0x1000>;
 		};
 
-		topclk: topclk@0x09800000 {
+		topclk: topclk@9800000 {
 			compatible = "zte,zx296702-topcrm-clk";
 			reg = <0x09800000 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		lsp1clk: lsp1clk@0x09400000 {
+		lsp1clk: lsp1clk@9400000 {
 			compatible = "zte,zx296702-lsp1crpm-clk";
 			reg = <0x09400000 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		lsp0clk: lsp0clk@0x0b000000 {
+		lsp0clk: lsp0clk@b000000 {
 			compatible = "zte,zx296702-lsp0crpm-clk";
 			reg = <0x0b000000 0x1000>;
 			#clock-cells = <1>;
 		};
 
-		uart0: serial@0x09405000 {
+		uart0: serial@9405000 {
 			compatible = "zte,zx296702-uart";
 			reg = <0x09405000 0x1000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -98,7 +98,7 @@ uart0: serial@0x09405000 {
 			status = "disabled";
 		};
 
-		uart1: serial@0x09406000 {
+		uart1: serial@9406000 {
 			compatible = "zte,zx296702-uart";
 			reg = <0x09406000 0x1000>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -106,7 +106,7 @@ uart1: serial@0x09406000 {
 			status = "disabled";
 		};
 
-		mmc0: mmc@0x09408000 {
+		mmc0: mmc@9408000 {
 			compatible = "snps,dw-mshc";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -119,7 +119,7 @@ mmc0: mmc@0x09408000 {
 			status = "disabled";
 		};
 
-		mmc1: mmc@0x0b003000 {
+		mmc1: mmc@b003000 {
 			compatible = "snps,dw-mshc";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -132,7 +132,7 @@ mmc1: mmc@0x0b003000 {
 			status = "disabled";
 		};
 
-		sysctrl: sysctrl@0xa0007000 {
+		sysctrl: sysctrl@a0007000 {
 			compatible = "zte,sysctrl", "syscon";
 			reg = <0xa0007000 0x1000>;
 		};

arch/arm/configs/omap2plus_defconfig

@@ -319,7 +319,7 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_RC_CORE=m
 CONFIG_MEDIA_CONTROLLER=y
 CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_LIRC=m
+CONFIG_LIRC=y
 CONFIG_RC_DEVICES=y
 CONFIG_IR_RX51=m
 CONFIG_V4L_PLATFORM_DRIVERS=y

arch/arm/mach-clps711x/board-dt.c

@@ -69,7 +69,7 @@ static void clps711x_restart(enum reboot_mode mode, const char *cmd)
 	soft_restart(0);
 }
 
-static const char *clps711x_compat[] __initconst = {
+static const char *const clps711x_compat[] __initconst = {
 	"cirrus,ep7209",
 	NULL
 };

arch/arm/mach-davinci/board-dm355-evm.c

@@ -368,7 +368,7 @@ static struct spi_eeprom at25640a = {
 	.flags		= EE_ADDR2,
 };
 
-static struct spi_board_info dm355_evm_spi_info[] __initconst = {
+static const struct spi_board_info dm355_evm_spi_info[] __initconst = {
 	{
 		.modalias	= "at25",
 		.platform_data	= &at25640a,

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -217,7 +217,7 @@ static struct spi_eeprom at25640a = {
 	.flags		= EE_ADDR2,
 };
 
-static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
+static const struct spi_board_info dm355_leopard_spi_info[] __initconst = {
 	{
 		.modalias	= "at25",
 		.platform_data	= &at25640a,

arch/arm/mach-davinci/board-dm365-evm.c

@@ -726,7 +726,7 @@ static struct spi_eeprom at25640 = {
 	.flags		= EE_ADDR2,
 };
 
-static struct spi_board_info dm365_evm_spi_info[] __initconst = {
+static const struct spi_board_info dm365_evm_spi_info[] __initconst = {
 	{
 		.modalias	= "at25",
 		.platform_data	= &at25640,

arch/arm/mach-mvebu/Kconfig

@@ -41,7 +41,7 @@ config MACH_ARMADA_375
 	depends on ARCH_MULTI_V7
 	select ARMADA_370_XP_IRQ
 	select ARM_ERRATA_720789
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_GIC
 	select ARMADA_375_CLK
 	select HAVE_ARM_SCU
@@ -57,7 +57,7 @@ config MACH_ARMADA_38X
 	bool "Marvell Armada 380/385 boards"
 	depends on ARCH_MULTI_V7
 	select ARM_ERRATA_720789
-	select ARM_ERRATA_753970
+	select PL310_ERRATA_753970
 	select ARM_GIC
 	select ARM_GLOBAL_TIMER
 	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK

arch/arm/mach-omap1/clock.c

@@ -1011,17 +1011,17 @@ static int clk_debugfs_register_one(struct clk *c)
 		return -ENOMEM;
 	c->dent = d;
 
-	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, (u8 *)&c->usecount);
+	d = debugfs_create_u8("usecount", S_IRUGO, c->dent, &c->usecount);
 	if (!d) {
 		err = -ENOMEM;
 		goto err_out;
 	}
-	d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+	d = debugfs_create_ulong("rate", S_IRUGO, c->dent, &c->rate);
 	if (!d) {
 		err = -ENOMEM;
 		goto err_out;
 	}
-	d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+	d = debugfs_create_x8("flags", S_IRUGO, c->dent, &c->flags);
 	if (!d) {
 		err = -ENOMEM;
 		goto err_out;

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -299,8 +299,6 @@ static void irq_save_context(void)
 	if (soc_is_dra7xx())
 		return;
 
-	if (!sar_base)
-		sar_base = omap4_get_sar_ram_base();
 	if (wakeupgen_ops && wakeupgen_ops->save_context)
 		wakeupgen_ops->save_context();
 }
@@ -598,6 +596,8 @@ static int __init wakeupgen_init(struct device_node *node,
 	irq_hotplug_init();
 	irq_pm_init();
 
+	sar_base = omap4_get_sar_ram_base();
+
 	return 0;
 }
 IRQCHIP_DECLARE(ti_wakeupgen, "ti,omap4-wugen-mpu", wakeupgen_init);

arch/arm/mach-omap2/omap_hwmod.c

@@ -977,6 +977,9 @@ static int _enable_clocks(struct omap_hwmod *oh)
 
 	pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
 
+	if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
+		_enable_optional_clocks(oh);
+
 	if (oh->_clk)
 		clk_enable(oh->_clk);
 
@@ -985,9 +988,6 @@ static int _enable_clocks(struct omap_hwmod *oh)
 			clk_enable(os->_clk);
 	}
 
-	if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
-		_enable_optional_clocks(oh);
-
 	/* The opt clocks are controlled by the device driver. */
 
 	return 0;

arch/arm/mach-omap2/pm.c

@@ -186,7 +186,7 @@ static void omap_pm_end(void)
 	cpu_idle_poll_ctrl(false);
 }
 
-static void omap_pm_finish(void)
+static void omap_pm_wake(void)
 {
 	if (soc_is_omap34xx())
 		omap_prcm_irq_complete();
@@ -196,7 +196,7 @@ static const struct platform_suspend_ops omap_pm_ops = {
 	.begin		= omap_pm_begin,
 	.end		= omap_pm_end,
 	.enter		= omap_pm_enter,
-	.finish		= omap_pm_finish,
+	.wake		= omap_pm_wake,
 	.valid		= suspend_valid_only_mem,
 };
 

arch/arm/mach-omap2/timer.c

@@ -156,12 +156,6 @@ static struct clock_event_device clockevent_gpt = {
 	.tick_resume		= omap2_gp_timer_shutdown,
 };
 
-static struct property device_disabled = {
-	.name = "status",
-	.length = sizeof("disabled"),
-	.value = "disabled",
-};
-
 static const struct of_device_id omap_timer_match[] __initconst = {
 	{ .compatible = "ti,omap2420-timer", },
 	{ .compatible = "ti,omap3430-timer", },
@@ -203,8 +197,17 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id *
 				  of_get_property(np, "ti,timer-secure", NULL)))
 			continue;
 
-		if (!of_device_is_compatible(np, "ti,omap-counter32k"))
-			of_add_property(np, &device_disabled);
+		if (!of_device_is_compatible(np, "ti,omap-counter32k")) {
+			struct property *prop;
+
+			prop = kzalloc(sizeof(*prop), GFP_KERNEL);
+			if (!prop)
+				return NULL;
+			prop->name = "status";
+			prop->value = "disabled";
+			prop->length = strlen(prop->value);
+			of_add_property(np, prop);
+		}
 		return np;
 	}
 

arch/arm/plat-orion/common.c

@@ -472,28 +472,27 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
 /*****************************************************************************
  * Ethernet switch
  ****************************************************************************/
-static __initconst const char *orion_ge00_mvmdio_bus_name = "orion-mii";
-static __initdata struct mdio_board_info
-		  orion_ge00_switch_board_info;
+static __initdata struct mdio_board_info orion_ge00_switch_board_info = {
+	.bus_id   = "orion-mii",
+	.modalias = "mv88e6085",
+};
 
 void __init orion_ge00_switch_init(struct dsa_chip_data *d)
 {
-	struct mdio_board_info *bd;
 	unsigned int i;
 
 	if (!IS_BUILTIN(CONFIG_PHYLIB))
 		return;
 
-	for (i = 0; i < ARRAY_SIZE(d->port_names); i++)
-		if (!strcmp(d->port_names[i], "cpu"))
+	for (i = 0; i < ARRAY_SIZE(d->port_names); i++) {
+		if (!strcmp(d->port_names[i], "cpu")) {
+			d->netdev[i] = &orion_ge00.dev;
 			break;
+		}
+	}
 
-	bd = &orion_ge00_switch_board_info;
-	bd->bus_id = orion_ge00_mvmdio_bus_name;
-	bd->mdio_addr = d->sw_addr;
-	d->netdev[i] = &orion_ge00.dev;
-	strcpy(bd->modalias, "mv88e6085");
-	bd->platform_data = d;
+	orion_ge00_switch_board_info.mdio_addr = d->sw_addr;
+	orion_ge00_switch_board_info.platform_data = d;
 
 	mdiobus_register_board_info(&orion_ge00_switch_board_info, 1);
 }

arch/arm64/boot/dts/amlogic/meson-axg.dtsi

@@ -165,14 +165,14 @@ spicc1: spi@15000 {
 
 			uart_A: serial@24000 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
-				reg = <0x0 0x24000 0x0 0x14>;
+				reg = <0x0 0x24000 0x0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_B: serial@23000 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart";
-				reg = <0x0 0x23000 0x0 0x14>;
+				reg = <0x0 0x23000 0x0 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -235,14 +235,14 @@ reset: reset-controller@4404 {
 
 			uart_A: serial@84c0 {
 				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x84c0 0x0 0x14>;
+				reg = <0x0 0x84c0 0x0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_B: serial@84dc {
 				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x84dc 0x0 0x14>;
+				reg = <0x0 0x84dc 0x0 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
@@ -287,7 +287,7 @@ pwm_ef: pwm@86c0 {
 
 			uart_C: serial@8700 {
 				compatible = "amlogic,meson-gx-uart";
-				reg = <0x0 0x8700 0x0 0x14>;
+				reg = <0x0 0x8700 0x0 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
@@ -404,14 +404,14 @@ sec_AO: ao-secure@140 {
 
 			uart_AO: serial@4c0 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
-				reg = <0x0 0x004c0 0x0 0x14>;
+				reg = <0x0 0x004c0 0x0 0x18>;
 				interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};
 
 			uart_AO_B: serial@4e0 {
 				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
-				reg = <0x0 0x004e0 0x0 0x14>;
+				reg = <0x0 0x004e0 0x0 0x18>;
 				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -631,6 +631,7 @@ internal_mdio: mdio@e40908ff {
 
 			internal_phy: ethernet-phy@8 {
 				compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22";
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <8>;
 				max-speed = <100>;
 			};

arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi

@@ -98,7 +98,7 @@ clk125mhz: uart_clk125mhz {
 		clock-output-names = "clk125mhz";
 	};
 
-	pci {
+	pcie@30000000 {
 		compatible = "pci-host-ecam-generic";
 		device_type = "pci";
 		#interrupt-cells = <1>;
@@ -118,6 +118,7 @@ pci {
 		ranges =
 		  <0x02000000    0 0x40000000    0 0x40000000    0 0x20000000
 		   0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>;
+		bus-range = <0 0xff>;
 		interrupt-map-mask = <0 0 0 7>;
 		interrupt-map =
 		      /* addr  pin  ic   icaddr  icintr */

arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts

@@ -51,7 +51,7 @@ reserved-memory {
 		#size-cells = <2>;
 		ranges;
 
-		ramoops@0x21f00000 {
+		ramoops@21f00000 {
 			compatible = "ramoops";
 			reg = <0x0 0x21f00000 0x0 0x00100000>;
 			record-size	= <0x00020000>;

arch/arm64/boot/dts/mediatek/mt8173.dtsi

@@ -341,7 +341,7 @@ syscfg_pctl_a: syscfg_pctl_a@10005000 {
 			reg = <0 0x10005000 0 0x1000>;
 		};
 
-		pio: pinctrl@0x10005000 {
+		pio: pinctrl@10005000 {
 			compatible = "mediatek,mt8173-pinctrl";
 			reg = <0 0x1000b000 0 0x1000>;
 			mediatek,pctl-regmap = <&syscfg_pctl_a>;

arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi

@@ -140,16 +140,16 @@ usb2_id: usb2-id {
 		};
 
 		agnoc@0 {
-			qcom,pcie@00600000 {
+			qcom,pcie@600000 {
 				perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>;
 			};
 
-			qcom,pcie@00608000 {
+			qcom,pcie@608000 {
 				status = "okay";
 				perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>;
 			};
 
-			qcom,pcie@00610000 {
+			qcom,pcie@610000 {
 				status = "okay";
 				perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>;
 			};

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -840,7 +840,7 @@ agnoc@0 {
 			#size-cells = <1>;
 			ranges;
 
-			pcie0: qcom,pcie@00600000 {
+			pcie0: qcom,pcie@600000 {
 				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
 				status = "disabled";
 				power-domains = <&gcc PCIE0_GDSC>;
@@ -893,7 +893,7 @@ pcie0: qcom,pcie@00600000 {
 
 			};
 
-			pcie1: qcom,pcie@00608000 {
+			pcie1: qcom,pcie@608000 {
 				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
 				power-domains = <&gcc PCIE1_GDSC>;
 				bus-range = <0x00 0xff>;
@@ -946,7 +946,7 @@ pcie1: qcom,pcie@00608000 {
 						"bus_slave";
 			};
 
-			pcie2: qcom,pcie@00610000 {
+			pcie2: qcom,pcie@610000 {
 				compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
 				power-domains = <&gcc PCIE2_GDSC>;
 				bus-range = <0x00 0xff>;

arch/arm64/boot/dts/rockchip/rk3328-rock64.dts

@@ -132,17 +132,16 @@ &gmac2io {
 	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
 	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
 	clock_in_out = "input";
-	/* shows instability at 1GBit right now */
-	max-speed = <100>;
 	phy-supply = <&vcc_io>;
 	phy-mode = "rgmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmiim1_pins>;
+	snps,force_thresh_dma_mode;
 	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x26>;
-	rx_delay = <0x11>;
+	tx_delay = <0x24>;
+	rx_delay = <0x18>;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3328.dtsi

@@ -730,7 +730,7 @@ sdmmc: dwmmc@ff500000 {
 		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		status = "disabled";
 	};
@@ -741,7 +741,7 @@ sdio: dwmmc@ff510000 {
 		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		status = "disabled";
 	};
@@ -752,7 +752,7 @@ emmc: dwmmc@ff520000 {
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		status = "disabled";
 	};

arch/arm64/boot/dts/rockchip/rk3368.dtsi

@@ -257,7 +257,7 @@ sdio0: dwmmc@ff0d0000 {
 		max-frequency = <150000000>;
 		clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
 			 <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 		resets = <&cru SRST_SDIO0>;

arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi

@@ -457,7 +457,7 @@ &pcie0 {
 	assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
 	assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
 	assigned-clock-rates = <100000000>;
-	ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
+	ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;

arch/arm64/boot/dts/rockchip/rk3399.dtsi

@@ -1739,8 +1739,8 @@ edp: edp@ff970000 {
 		compatible = "rockchip,rk3399-edp";
 		reg = <0x0 0xff970000 0x0 0x8000>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
-		clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>;
-		clock-names = "dp", "pclk";
+		clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>;
+		clock-names = "dp", "pclk", "grf";
 		pinctrl-names = "default";
 		pinctrl-0 = <&edp_hpd>;
 		power-domains = <&power RK3399_PD_EDP>;

drivers/bus/ti-sysc.c

@@ -630,7 +630,7 @@ static int sysc_init_dts_quirks(struct sysc *ddata)
 	for (i = 0; i < ARRAY_SIZE(sysc_dts_quirks); i++) {
 		prop = of_get_property(np, sysc_dts_quirks[i].name, &len);
 		if (!prop)
-			break;
+			continue;
 
 		ddata->cfg.quirks |= sysc_dts_quirks[i].mask;
 	}

drivers/memory/brcmstb_dpfe.c

@@ -45,8 +45,16 @@
 #define REG_TO_DCPU_MBOX	0x10
 #define REG_TO_HOST_MBOX	0x14
 
+/* Macros to process offsets returned by the DCPU */
+#define DRAM_MSG_ADDR_OFFSET	0x0
+#define DRAM_MSG_TYPE_OFFSET	0x1c
+#define DRAM_MSG_ADDR_MASK	((1UL << DRAM_MSG_TYPE_OFFSET) - 1)
+#define DRAM_MSG_TYPE_MASK	((1UL << \
+				 (BITS_PER_LONG - DRAM_MSG_TYPE_OFFSET)) - 1)
+
 /* Message RAM */
-#define DCPU_MSG_RAM(x)		(0x100 + (x) * sizeof(u32))
+#define DCPU_MSG_RAM_START	0x100
+#define DCPU_MSG_RAM(x)		(DCPU_MSG_RAM_START + (x) * sizeof(u32))
 
 /* DRAM Info Offsets & Masks */
 #define DRAM_INFO_INTERVAL	0x0
@@ -255,6 +263,40 @@ static unsigned int get_msg_chksum(const u32 msg[])
 	return sum;
 }
 
+static void __iomem *get_msg_ptr(struct private_data *priv, u32 response,
+				 char *buf, ssize_t *size)
+{
+	unsigned int msg_type;
+	unsigned int offset;
+	void __iomem *ptr = NULL;
+
+	msg_type = (response >> DRAM_MSG_TYPE_OFFSET) & DRAM_MSG_TYPE_MASK;
+	offset = (response >> DRAM_MSG_ADDR_OFFSET) & DRAM_MSG_ADDR_MASK;
+
+	/*
+	 * msg_type == 1: the offset is relative to the message RAM
+	 * msg_type == 0: the offset is relative to the data RAM (this is the
+	 *                previous way of passing data)
+	 * msg_type is anything else: there's critical hardware problem
+	 */
+	switch (msg_type) {
+	case 1:
+		ptr = priv->regs + DCPU_MSG_RAM_START + offset;
+		break;
+	case 0:
+		ptr = priv->dmem + offset;
+		break;
+	default:
+		dev_emerg(priv->dev, "invalid message reply from DCPU: %#x\n",
+			response);
+		if (buf && size)
+			*size = sprintf(buf,
+				"FATAL: communication error with DCPU\n");
+	}
+
+	return ptr;
+}
+
 static int __send_command(struct private_data *priv, unsigned int cmd,
 			  u32 result[])
 {
@@ -507,7 +549,7 @@ static ssize_t show_info(struct device *dev, struct device_attribute *devattr,
 {
 	u32 response[MSG_FIELD_MAX];
 	unsigned int info;
-	int ret;
+	ssize_t ret;
 
 	ret = generic_show(DPFE_CMD_GET_INFO, response, dev, buf);
 	if (ret)
@@ -528,18 +570,19 @@ static ssize_t show_refresh(struct device *dev,
 	u32 response[MSG_FIELD_MAX];
 	void __iomem *info;
 	struct private_data *priv;
-	unsigned int offset;
 	u8 refresh, sr_abort, ppre, thermal_offs, tuf;
 	u32 mr4;
-	int ret;
+	ssize_t ret;
 
 	ret = generic_show(DPFE_CMD_GET_REFRESH, response, dev, buf);
 	if (ret)
 		return ret;
 
 	priv = dev_get_drvdata(dev);
-	offset = response[MSG_ARG0];
-	info = priv->dmem + offset;
+
+	info = get_msg_ptr(priv, response[MSG_ARG0], buf, &ret);
+	if (!info)
+		return ret;
 
 	mr4 = readl_relaxed(info + DRAM_INFO_MR4) & DRAM_INFO_MR4_MASK;
 
@@ -561,7 +604,6 @@ static ssize_t store_refresh(struct device *dev, struct device_attribute *attr,
 	u32 response[MSG_FIELD_MAX];
 	struct private_data *priv;
 	void __iomem *info;
-	unsigned int offset;
 	unsigned long val;
 	int ret;
 
@@ -574,8 +616,10 @@ static ssize_t store_refresh(struct device *dev, struct device_attribute *attr,
 	if (ret)
 		return ret;
 
-	offset = response[MSG_ARG0];
-	info = priv->dmem + offset;
+	info = get_msg_ptr(priv, response[MSG_ARG0], NULL, NULL);
+	if (!info)
+		return -EIO;
+
 	writel_relaxed(val, info + DRAM_INFO_INTERVAL);
 
 	return count;
@@ -587,23 +631,25 @@ static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr,
 	u32 response[MSG_FIELD_MAX];
 	struct private_data *priv;
 	void __iomem *info;
-	unsigned int offset;
-	int ret;
+	ssize_t ret;
 
 	ret = generic_show(DPFE_CMD_GET_VENDOR, response, dev, buf);
 	if (ret)
 		return ret;
 
-	offset = response[MSG_ARG0];
 	priv = dev_get_drvdata(dev);
-	info = priv->dmem + offset;
+
+	info = get_msg_ptr(priv, response[MSG_ARG0], buf, &ret);
+	if (!info)
+		return ret;
 
 	return sprintf(buf, "%#x %#x %#x %#x %#x\n",
 		       readl_relaxed(info + DRAM_VENDOR_MR5) & DRAM_VENDOR_MASK,
 		       readl_relaxed(info + DRAM_VENDOR_MR6) & DRAM_VENDOR_MASK,
 		       readl_relaxed(info + DRAM_VENDOR_MR7) & DRAM_VENDOR_MASK,
 		       readl_relaxed(info + DRAM_VENDOR_MR8) & DRAM_VENDOR_MASK,
-		       readl_relaxed(info + DRAM_VENDOR_ERROR));
+		       readl_relaxed(info + DRAM_VENDOR_ERROR) &
+				     DRAM_VENDOR_MASK);
 }
 
 static int brcmstb_dpfe_resume(struct platform_device *pdev)

drivers/soc/imx/gpc.c

@@ -470,13 +470,21 @@ static int imx_gpc_probe(struct platform_device *pdev)
 
 static int imx_gpc_remove(struct platform_device *pdev)
 {
+	struct device_node *pgc_node;
 	int ret;
 
+	pgc_node = of_get_child_by_name(pdev->dev.of_node, "pgc");
+
+	/* bail out if DT too old and doesn't provide the necessary info */
+	if (!of_property_read_bool(pdev->dev.of_node, "#power-domain-cells") &&
+	    !pgc_node)
+		return 0;
+
 	/*
 	 * If the old DT binding is used the toplevel driver needs to
 	 * de-register the power domains
 	 */
-	if (!of_get_child_by_name(pdev->dev.of_node, "pgc")) {
+	if (!pgc_node) {
 		of_genpd_del_provider(pdev->dev.of_node);
 
 		ret = pm_genpd_remove(&imx_gpc_domains[GPC_PGC_DOMAIN_PU].base);