ARM: sun6i: Enable clock support in the DTSI

Now that the clock driver has support for the A31 clocks, we can add
them to the DTSI and start using them in the relevant hardware blocks.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -51,13 +51,137 @@ memory {
 
 	clocks {
 		#address-cells = <1>;
-		#size-cells = <0>;
+		#size-cells = <1>;
+		ranges;
 
-		osc: oscillator {
+		osc24M: osc24M {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
 		};
+
+		osc32k: osc32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		pll1: pll1@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+		};
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		pll6: pll6 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		cpu: cpu@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-cpu-clk";
+			reg = <0x01c20050 0x4>;
+
+			/*
+			 * PLL1 is listed twice here.
+			 * While it looks suspicious, it's actually documented
+			 * that way both in the datasheet and in the code from
+			 * Allwinner.
+			 */
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+		};
+
+		axi: axi@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-axi-clk";
+			reg = <0x01c20050 0x4>;
+			clocks = <&cpu>;
+		};
+
+		ahb1_mux: ahb1_mux@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
+		};
+
+		ahb1: ahb1@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1_mux>;
+		};
+
+		ahb1_gates: ahb1_gates@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb1>;
+			clock-output-names = "ahb1_mipidsi", "ahb1_ss",
+					"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
+					"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
+					"ahb1_nand0", "ahb1_sdram",
+					"ahb1_gmac", "ahb1_ts", "ahb1_hstimer",
+					"ahb1_spi0", "ahb1_spi1", "ahb1_spi2",
+					"ahb1_spi3", "ahb1_otg", "ahb1_ehci0",
+					"ahb1_ehci1", "ahb1_ohci0",
+					"ahb1_ohci1", "ahb1_ohci2", "ahb1_ve",
+					"ahb1_lcd0", "ahb1_lcd1", "ahb1_csi",
+					"ahb1_hdmi", "ahb1_de0", "ahb1_de1",
+					"ahb1_fe0", "ahb1_fe1", "ahb1_mp",
+					"ahb1_gpu", "ahb1_deu0", "ahb1_deu1",
+					"ahb1_drc0", "ahb1_drc1";
+		};
+
+		apb1: apb1@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1>;
+		};
+
+		apb1_gates: apb1_gates@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-apb1-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_codec", "apb1_digital_mic",
+					"apb1_pio", "apb1_daudio0",
+					"apb1_daudio1";
+		};
+
+		apb2_mux: apb2_mux@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-apb1-mux-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+		};
+
+		apb2: apb2@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-apb2-div-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&apb2_mux>;
+		};
+
+		apb2_gates: apb2_gates@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-apb2-gates-clk";
+			reg = <0x01c2006c 0x8>;
+			clocks = <&apb2>;
+			clock-output-names = "apb2_i2c0", "apb2_i2c1",
+					"apb2_i2c2", "apb2_i2c3", "apb2_uart0",
+					"apb2_uart1", "apb2_uart2", "apb2_uart3",
+					"apb2_uart4", "apb2_uart5";
+		};
 	};
 
 	soc@01c00000 {
@@ -70,7 +194,7 @@ pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun6i-a31-pinctrl";
 			reg = <0x01c20800 0x400>;
 			interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>;
-			clocks = <&osc>;
+			clocks = <&apb1_gates 5>;
 			gpio-controller;
 			interrupt-controller;
 			#address-cells = <1>;
@@ -93,7 +217,7 @@ timer@01c20c00 {
 				     <0 20 1>,
 				     <0 21 1>,
 				     <0 22 1>;
-			clocks = <&osc>;
+			clocks = <&osc24M>;
 		};
 
 		wdt1: watchdog@01c20ca0 {
@@ -107,7 +231,7 @@ uart0: serial@01c28000 {
 			interrupts = <0 0 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc>;
+			clocks = <&apb2_gates 16>;
 			status = "disabled";
 		};
 
@@ -117,7 +241,7 @@ uart1: serial@01c28400 {
 			interrupts = <0 1 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc>;
+			clocks = <&apb2_gates 17>;
 			status = "disabled";
 		};
 
@@ -127,7 +251,7 @@ uart2: serial@01c28800 {
 			interrupts = <0 2 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc>;
+			clocks = <&apb2_gates 18>;
 			status = "disabled";
 		};
 
@@ -137,7 +261,7 @@ uart3: serial@01c28c00 {
 			interrupts = <0 3 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc>;
+			clocks = <&apb2_gates 19>;
 			status = "disabled";
 		};
 
@@ -147,7 +271,7 @@ uart4: serial@01c29000 {
 			interrupts = <0 4 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc>;
+			clocks = <&apb2_gates 20>;
 			status = "disabled";
 		};
 
@@ -157,7 +281,7 @@ uart5: serial@01c29400 {
 			interrupts = <0 5 1>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
-			clocks = <&osc>;
+			clocks = <&apb2_gates 21>;
 			status = "disabled";
 		};