Commit 9823b2d0 authored by Thomas Kunze's avatar Thomas Kunze Committed by Thomas Kunze

collie: support pda_power driver

This add the pda-power platform device to collie.
parent f1fce597
......@@ -26,6 +26,7 @@
#include <linux/mtd/partitions.h>
#include <linux/timer.h>
#include <linux/gpio.h>
#include <linux/pda_power.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
......@@ -89,6 +90,69 @@ static struct mcp_plat_data collie_mcp_data = {
.gpio_base = COLLIE_TC35143_GPIO_BASE,
};
/*
* Collie AC IN
*/
static int collie_power_init(struct device *dev)
{
int ret = gpio_request(COLLIE_GPIO_AC_IN, "ac in");
if (ret)
goto err_gpio_req;
ret = gpio_direction_input(COLLIE_GPIO_AC_IN);
if (ret)
goto err_gpio_in;
return 0;
err_gpio_in:
gpio_free(COLLIE_GPIO_AC_IN);
err_gpio_req:
return ret;
}
static void collie_power_exit(struct device *dev)
{
gpio_free(COLLIE_GPIO_AC_IN);
}
static int collie_power_ac_online(void)
{
return gpio_get_value(COLLIE_GPIO_AC_IN) == 2;
}
static char *collie_ac_supplied_to[] = {
"main-battery",
"backup-battery",
};
static struct pda_power_pdata collie_power_data = {
.init = collie_power_init,
.is_ac_online = collie_power_ac_online,
.exit = collie_power_exit,
.supplied_to = collie_ac_supplied_to,
.num_supplicants = ARRAY_SIZE(collie_ac_supplied_to),
};
static struct resource collie_power_resource[] = {
{
.name = "ac",
.start = gpio_to_irq(COLLIE_GPIO_AC_IN),
.end = gpio_to_irq(COLLIE_GPIO_AC_IN),
.flags = IORESOURCE_IRQ |
IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
},
};
static struct platform_device collie_power_device = {
.name = "pda-power",
.id = -1,
.dev.platform_data = &collie_power_data,
.resource = collie_power_resource,
.num_resources = ARRAY_SIZE(collie_power_resource),
};
#ifdef CONFIG_SHARP_LOCOMO
/*
* low-level UART features.
......@@ -180,6 +244,7 @@ struct platform_device collie_locomo_device = {
static struct platform_device *devices[] __initdata = {
&collie_locomo_device,
&colliescoop_device,
&collie_power_device,
};
static struct mtd_partition collie_partitions[] = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment