Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "We get support for three new 32-bit SoC platforms this time.

  The amount of changes in arch/arm for any of them is miniscule, as all
  the interesting code is in device driver subsystems (irqchip, clk,
  pinctrl, ...) these days.  I'm listing them here, as the addition of
  the Kconfig statement is the main relevant milestone for a new
  platform.  In each case, some drivers are are shared with existing
  platforms, while other drivers are added for v4.7 as well, or come in
  a later release.

   - The Aspeed platform is probably the most interesting one, this is
     what most whitebox servers use as their baseboard management
     controller.  We get support for the very common ast2400 and ast2500
     SoCs.  The OpenBMC project focuses on this chip, and the LWN
     article about their ELC 2016 presentation at

        https://lwn.net/Articles/683320/

     triggered the submission, but the code comes from IBM's OpenPOWER
     team rather than the team at Facebook.  There are still a lot more
     drivers that need to get added over time, and I hope both teams can
     work together on that.

   - OXNAS is an old platform for Network Attached Storage devices from
     Oxford Semiconductor.  There are models with ARM10 (!) and
     ARM11MPCore cores, but for now, we only support the original ARM9
     based versions.  The product lineup was subsequently part of PLX,
     Avago and now the new Broadcom Ltd.

        https://wiki.openwrt.org/doc/hardware/soc/soc.oxnas

     has some more information.

   - V2M-MPS2 is a prototyping platform from ARM for their Cortex-M
     cores and is related to the existing Realview / Versatile Express
     lineup, but without MMU.

     We now support various NOMMU platforms, so adding a new one is
     fairly straightforward.

        http://infocenter.arm.com/help/topic/com.arm.doc.100112_0100_03_en/

     has detailed information about the platform.

  Other noteworthy updates:

   - Work on LPC32xx has resumed, and Vladimir Zapolskiy and Sylvain
     Lemieux are now maintaining the platform.

     This is an older ARM9 based platform from NXP (not Freescale), but
     it remains in use in embedded markets.

   - Kevin Hilman is now co-maintaining the Amlogic Meson platform for
     both 32-bit and 64-bit ARM, and started contributing some patches.

   - As is often the case, work on the OMAP platforms makes up the bulk
     of the actual SoC code changes in arch/arm, but there isn't a lot
     of that either"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  MAINTAINERS: ARM/Amlogic: add co-maintainer, misc. updates
  MAINTAINERS: add ARM/NXP LPC32XX SoC specific drivers to the section
  MAINTAINERS: add new maintainers of NXP LPC32xx SoC
  MAINTAINERS: move ARM/NXP LPC32xx record to ARM section
  arm: Add Aspeed machine
  ARM: lpc32xx: remove duplicate const on lpc32xx_auxdata_lookup
  ARM: lpc32xx: remove leftovers of legacy clock source and provider drivers
  ARM: lpc32xx: remove reboot header file
  ARM: dove: Remove CLK_IS_ROOT
  ARM: orion5x: Remove CLK_IS_ROOT
  ARM: mv78xx0: Remove CLK_IS_ROOT
  ARM: davinci: da850: use clk->set_parent for async3
  ARM: davinci: Move clock init after ioremap.
  MAINTAINERS: Update ARM Versatile Express platform entry
  ARM: vexpress/mps2: introduce MPS2 platform
  MAINTAINERS: add maintainer entry for ARM/OXNAS platform
  ARM: Add new mach-oxnas
  irqchip: versatile-fpga: add new compatible for OX810SE SoC
  ARM: uniphier: correct the call order of of_node_put()
  MAINTAINERS: fix stale TI DaVinci entries
  ...

Documentation/devicetree/bindings/arm/atmel-at91.txt

@@ -41,6 +41,10 @@ compatible: must be one of:
        - "atmel,sama5d43"
        - "atmel,sama5d44"
 
+Chipid required properties:
+- compatible: Should be "atmel,sama5d2-chipid"
+- reg : Should contain registers location and length
+
 PIT Timer required properties:
 - compatible: Should be "atmel,at91sam9260-pit"
 - reg: Should contain registers location and length

MAINTAINERS

@@ -949,12 +949,15 @@ F:	drivers/clk/sunxi/
 
 ARM/Amlogic Meson SoC support
 M:	Carlo Caione <carlo@caione.org>
+M:	Kevin Hilman <khilman@baylibre.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L:	linux-meson@googlegroups.com
+L:	linux-amlogic@lists.infradead.org
 W:	http://linux-meson.com/
 S:	Maintained
 F:	arch/arm/mach-meson/
 F:	arch/arm/boot/dts/meson*
+F:	arch/arm64/boot/dts/amlogic/
+F: 	drivers/pinctrl/meson/
 N:	meson
 
 ARM/Annapurna Labs ALPINE ARCHITECTURE
@@ -976,6 +979,13 @@ F:	arch/arm/mach-artpec
 F:	arch/arm/boot/dts/artpec6*
 F:	drivers/clk/clk-artpec6.c
 
+ARM/ASPEED MACHINE SUPPORT
+M:	Joel Stanley <joel@jms.id.au>
+S:	Maintained
+F:	arch/arm/mach-aspeed/
+F:	arch/arm/boot/dts/aspeed-*
+F:	drivers/*/*aspeed*
+
 ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 M:	Alexandre Belloni <alexandre.belloni@free-electrons.com>
@@ -1307,6 +1317,20 @@ F:	drivers/mtd/spi-nor/nxp-spifi.c
 F:	drivers/rtc/rtc-lpc24xx.c
 N:	lpc18xx
 
+ARM/LPC32XX SOC SUPPORT
+M:	Vladimir Zapolskiy <vz@mleia.com>
+M:	Sylvain Lemieux <slemieux.tyco@gmail.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T:	git git://github.com/vzapolskiy/linux-lpc32xx.git
+S:	Maintained
+F:	arch/arm/boot/dts/lpc32*
+F:	arch/arm/mach-lpc32xx/
+F:	drivers/i2c/busses/i2c-pnx.c
+F:	drivers/net/ethernet/nxp/lpc_eth.c
+F:	drivers/usb/host/ohci-nxp.c
+F:	drivers/watchdog/pnx4008_wdt.c
+N:	lpc32xx
+
 ARM/MAGICIAN MACHINE SUPPORT
 M:	Philipp Zabel <philipp.zabel@gmail.com>
 S:	Maintained
@@ -1357,6 +1381,15 @@ W:	http://www.digriz.org.uk/ts78xx/kernel
 S:	Maintained
 F:	arch/arm/mach-orion5x/ts78xx-*
 
+ARM/OXNAS platform support
+M:	Neil Armstrong <narmstrong@baylibre.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-oxnas/
+F:	arch/arm/boot/dts/oxnas*
+F:	arch/arm/boot/dts/wd-mbwe.dts
+N:	oxnas
+
 ARM/Mediatek RTC DRIVER
 M:	Eddie Huang <eddie.huang@mediatek.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1643,6 +1676,7 @@ F:	arch/arm/boot/dts/sti*
 F:	drivers/char/hw_random/st-rng.c
 F:	drivers/clocksource/arm_global_timer.c
 F:	drivers/clocksource/clksrc_st_lpc.c
+F:	drivers/cpufreq/sti-cpufreq.c
 F:	drivers/i2c/busses/i2c-st.c
 F:	drivers/media/rc/st_rc.c
 F:	drivers/media/platform/sti/c8sectpfe/
@@ -1652,6 +1686,7 @@ F:	drivers/phy/phy-miphy365x.c
 F:	drivers/phy/phy-stih407-usb.c
 F:	drivers/phy/phy-stih41x-usb.c
 F:	drivers/pinctrl/pinctrl-st.c
+F:	drivers/remoteproc/st_remoteproc.c
 F:	drivers/reset/sti/
 F:	drivers/rtc/rtc-st-lpc.c
 F:	drivers/tty/serial/st-asc.c
@@ -1776,6 +1811,7 @@ F:	*/*/vexpress*
 F:	*/*/*/vexpress*
 F:	drivers/clk/versatile/clk-vexpress-osc.c
 F:	drivers/clocksource/versatile.c
+N:	mps2
 
 ARM/VFP SUPPORT
 M:	Russell King <linux@armlinux.org.uk>
@@ -6789,12 +6825,6 @@ W:	logfs.org
 S:	Maintained
 F:	fs/logfs/
 
-LPC32XX MACHINE SUPPORT
-M:	Roland Stigge <stigge@antcom.de>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-F:	arch/arm/mach-lpc32xx/
-
 LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
 M:	Sathya Prakash <sathya.prakash@broadcom.com>
 M:	Chaitra P B <chaitra.basappa@broadcom.com>
@@ -10174,8 +10204,8 @@ F:	arch/arm/mach-s3c24xx/bast-irq.c
 TI DAVINCI MACHINE SUPPORT
 M:	Sekhar Nori <nsekhar@ti.com>
 M:	Kevin Hilman <khilman@kernel.org>
-T:	git git://gitorious.org/linux-davinci/linux-davinci.git
-Q:	http://patchwork.kernel.org/project/linux-davinci/list/
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
 S:	Supported
 F:	arch/arm/mach-davinci/
 F:	drivers/i2c/busses/i2c-davinci.c

arch/arm/Kconfig

@@ -777,6 +777,8 @@ source "arch/arm/mach-meson/Kconfig"
 
 source "arch/arm/mach-moxart/Kconfig"
 
+source "arch/arm/mach-aspeed/Kconfig"
+
 source "arch/arm/mach-mv78xx0/Kconfig"
 
 source "arch/arm/mach-imx/Kconfig"
@@ -806,6 +808,8 @@ source "arch/arm/plat-pxa/Kconfig"
 
 source "arch/arm/mach-mmp/Kconfig"
 
+source "arch/arm/mach-oxnas/Kconfig"
+
 source "arch/arm/mach-qcom/Kconfig"
 
 source "arch/arm/mach-realview/Kconfig"
@@ -894,6 +898,18 @@ config MACH_STM32F429
 	depends on ARCH_STM32
 	default y
 
+config ARCH_MPS2
+	bool "ARM MPS2 paltform"
+	depends on ARM_SINGLE_ARMV7M
+	select ARM_AMBA
+	select CLKSRC_MPS2
+	help
+	  Support for Cortex-M Prototyping System (or V2M-MPS2) which comes
+	  with a range of available cores like Cortex-M3/M4/M7.
+
+	  Please, note that depends which Application Note is used memory map
+	  for the platform may vary, so adjustment of RAM base might be needed.
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool

arch/arm/Makefile

@@ -183,6 +183,7 @@ machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MMP)		+= mmp
+machine-$(CONFIG_ARCH_MPS2)		+= vexpress
 machine-$(CONFIG_ARCH_MOXART)		+= moxart
 machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu

arch/arm/mach-aspeed/Kconfig

+menuconfig ARCH_ASPEED
+	bool "Aspeed BMC architectures"
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6
+	select SRAM
+	select WATCHDOG
+	select ASPEED_WATCHDOG
+	select MOXART_TIMER
+	help
+	  Say Y here if you want to run your kernel on an ASpeed BMC SoC.
+
+if ARCH_ASPEED
+
+config MACH_ASPEED_G4
+	bool "Aspeed SoC 4th Generation"
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+	help
+	 Say yes if you intend to run on an Aspeed ast2400 or similar
+	 fourth generation BMCs, such as those used by OpenPower Power8
+	 systems.
+
+config MACH_ASPEED_G5
+	bool "Aspeed SoC 5th Generation"
+	depends on ARCH_MULTI_V6
+	select CPU_V6
+	help
+	 Say yes if you intend to run on an Aspeed ast2500 or similar
+	 fifth generation Aspeed BMCs.
+
+endif

arch/arm/mach-at91/sama5.c

@@ -18,8 +18,26 @@
 #include "soc.h"
 
 static const struct at91_soc sama5_socs[] = {
-	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27_EXID_MATCH,
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D21CU_EXID_MATCH,
+		 "sama5d21", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D22CU_EXID_MATCH,
+		 "sama5d22", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D23CU_EXID_MATCH,
+		 "sama5d23", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CX_EXID_MATCH,
+		 "sama5d24", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CU_EXID_MATCH,
+		 "sama5d24", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D26CU_EXID_MATCH,
+		 "sama5d26", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CU_EXID_MATCH,
 		 "sama5d27", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CN_EXID_MATCH,
+		 "sama5d27", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CU_EXID_MATCH,
+		 "sama5d28", "sama5d2"),
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CN_EXID_MATCH,
+		 "sama5d28", "sama5d2"),
 	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
 		 "sama5d31", "sama5d3"),
 	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,

arch/arm/mach-at91/soc.c

@@ -22,48 +22,93 @@
 #include "soc.h"
 
 #define AT91_DBGU_CIDR			0x40
-#define AT91_DBGU_CIDR_VERSION(x)	((x) & 0x1f)
-#define AT91_DBGU_CIDR_EXT		BIT(31)
-#define AT91_DBGU_CIDR_MATCH_MASK	0x7fffffe0
 #define AT91_DBGU_EXID			0x44
+#define AT91_CHIPID_CIDR		0x00
+#define AT91_CHIPID_EXID		0x04
+#define AT91_CIDR_VERSION(x)		((x) & 0x1f)
+#define AT91_CIDR_EXT			BIT(31)
+#define AT91_CIDR_MATCH_MASK		0x7fffffe0
 
-struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
+static int __init at91_get_cidr_exid_from_dbgu(u32 *cidr, u32 *exid)
 {
-	struct soc_device_attribute *soc_dev_attr;
-	const struct at91_soc *soc;
-	struct soc_device *soc_dev;
 	struct device_node *np;
 	void __iomem *regs;
-	u32 cidr, exid;
 
 	np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu");
 	if (!np)
 		np = of_find_compatible_node(NULL, NULL,
 					     "atmel,at91sam9260-dbgu");
+	if (!np)
+		return -ENODEV;
 
-	if (!np) {
-		pr_warn("Could not find DBGU node");
-		return NULL;
+	regs = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (!regs) {
+		pr_warn("Could not map DBGU iomem range");
+		return -ENXIO;
 	}
 
+	*cidr = readl(regs + AT91_DBGU_CIDR);
+	*exid = readl(regs + AT91_DBGU_EXID);
+
+	iounmap(regs);
+
+	return 0;
+}
+
+static int __init at91_get_cidr_exid_from_chipid(u32 *cidr, u32 *exid)
+{
+	struct device_node *np;
+	void __iomem *regs;
+
+	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-chipid");
+	if (!np)
+		return -ENODEV;
+
 	regs = of_iomap(np, 0);
 	of_node_put(np);
 
 	if (!regs) {
 		pr_warn("Could not map DBGU iomem range");
-		return NULL;
+		return -ENXIO;
 	}
 
-	cidr = readl(regs + AT91_DBGU_CIDR);
-	exid = readl(regs + AT91_DBGU_EXID);
+	*cidr = readl(regs + AT91_CHIPID_CIDR);
+	*exid = readl(regs + AT91_CHIPID_EXID);
 
 	iounmap(regs);
 
+	return 0;
+}
+
+struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	const struct at91_soc *soc;
+	struct soc_device *soc_dev;
+	u32 cidr, exid;
+	int ret;
+
+	/*
+	 * With SAMA5D2 and later SoCs, CIDR and EXID registers are no more
+	 * in the dbgu device but in the chipid device whose purpose is only
+	 * to expose these two registers.
+	 */
+	ret = at91_get_cidr_exid_from_dbgu(&cidr, &exid);
+	if (ret)
+		ret = at91_get_cidr_exid_from_chipid(&cidr, &exid);
+	if (ret) {
+		if (ret == -ENODEV)
+			pr_warn("Could not find identification node");
+		return NULL;
+	}
+
 	for (soc = socs; soc->name; soc++) {
-		if (soc->cidr_match != (cidr & AT91_DBGU_CIDR_MATCH_MASK))
+		if (soc->cidr_match != (cidr & AT91_CIDR_MATCH_MASK))
 			continue;
 
-		if (!(cidr & AT91_DBGU_CIDR_EXT) || soc->exid_match == exid)
+		if (!(cidr & AT91_CIDR_EXT) || soc->exid_match == exid)
 			break;
 	}
 
@@ -79,7 +124,7 @@ struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
 	soc_dev_attr->family = soc->family;
 	soc_dev_attr->soc_id = soc->name;
 	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X",
-					   AT91_DBGU_CIDR_VERSION(cidr));
+					   AT91_CIDR_VERSION(cidr));
 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev)) {
 		kfree(soc_dev_attr->revision);
@@ -91,7 +136,7 @@ struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
 	if (soc->family)
 		pr_info("Detected SoC family: %s\n", soc->family);
 	pr_info("Detected SoC: %s, revision %X\n", soc->name,
-		AT91_DBGU_CIDR_VERSION(cidr));
+		AT91_CIDR_VERSION(cidr));
 
 	return soc_dev;
 }

arch/arm/mach-at91/soc.h

@@ -63,7 +63,17 @@ at91_soc_init(const struct at91_soc *socs);
 #define AT91SAM9XE512_CIDR_MATCH	0x329aa3a0
 
 #define SAMA5D2_CIDR_MATCH		0x0a5c08c0
-#define SAMA5D27_EXID_MATCH		0x00000021
+#define SAMA5D21CU_EXID_MATCH		0x0000005a
+#define SAMA5D22CU_EXID_MATCH		0x00000059
+#define SAMA5D22CN_EXID_MATCH		0x00000069
+#define SAMA5D23CU_EXID_MATCH		0x00000058
+#define SAMA5D24CX_EXID_MATCH		0x00000004
+#define SAMA5D24CU_EXID_MATCH		0x00000014
+#define SAMA5D26CU_EXID_MATCH		0x00000012
+#define SAMA5D27CU_EXID_MATCH		0x00000011
+#define SAMA5D27CN_EXID_MATCH		0x00000021
+#define SAMA5D28CU_EXID_MATCH		0x00000010
+#define SAMA5D28CN_EXID_MATCH		0x00000020
 
 #define SAMA5D3_CIDR_MATCH		0x0a5c07c0
 #define SAMA5D31_EXID_MATCH		0x00444300

arch/arm/mach-davinci/Makefile

@@ -14,8 +14,8 @@ obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM355)        += dm355.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM646x)       += dm646x.o devices.o
 obj-$(CONFIG_ARCH_DAVINCI_DM365)	+= dm365.o devices.o
-obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
-obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA830)	+= da830.o devices-da8xx.o usb-da8xx.o
+obj-$(CONFIG_ARCH_DAVINCI_DA850)	+= da850.o devices-da8xx.o usb-da8xx.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o

arch/arm/mach-davinci/clock.c

@@ -195,6 +195,14 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 		return -EINVAL;
 
 	mutex_lock(&clocks_mutex);
+	if (clk->set_parent) {
+		int ret = clk->set_parent(clk, parent);
+
+		if (ret) {
+			mutex_unlock(&clocks_mutex);
+			return ret;
+		}
+	}
 	clk->parent = parent;
 	list_del_init(&clk->childnode);
 	list_add(&clk->childnode, &clk->parent->children);
@@ -224,8 +232,17 @@ int clk_register(struct clk *clk)
 
 	mutex_lock(&clocks_mutex);
 	list_add_tail(&clk->node, &clocks);
-	if (clk->parent)
+	if (clk->parent) {
+		if (clk->set_parent) {
+			int ret = clk->set_parent(clk, clk->parent);
+
+			if (ret) {
+				mutex_unlock(&clocks_mutex);
+				return ret;
+			}
+		}
 		list_add_tail(&clk->childnode, &clk->parent->children);
+	}
 	mutex_unlock(&clocks_mutex);
 
 	/* If rate is already set, use it */
@@ -560,7 +577,7 @@ EXPORT_SYMBOL(davinci_set_pllrate);
  * than that used by default in <soc>.c file. The reference clock rate
  * should be updated early in the boot process; ideally soon after the
  * clock tree has been initialized once with the default reference clock
- * rate (davinci_common_init()).
+ * rate (davinci_clk_init()).
  *
  * Returns 0 on success, error otherwise.
  */

arch/arm/mach-davinci/clock.h

@@ -106,6 +106,7 @@ struct clk {
 	int (*reset) (struct clk *clk, bool reset);
 	void (*clk_enable) (struct clk *clk);
 	void (*clk_disable) (struct clk *clk);
+	int (*set_parent) (struct clk *clk, struct clk *parent);
 };
 
 /* Clock flags: SoC-specific flags start at BIT(16) */

arch/arm/mach-davinci/common.c

@@ -108,12 +108,6 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 	if (ret < 0)
 		goto err;
 
-	if (davinci_soc_info.cpu_clks) {
-		ret = davinci_clk_init(davinci_soc_info.cpu_clks);
-
-		if (ret != 0)
-			goto err;
-	}
 
 	return;
 

arch/arm/mach-davinci/da830.c

@@ -1214,4 +1214,6 @@ void __init da830_init(void)
 
 	da8xx_syscfg0_base = ioremap(DA8XX_SYSCFG0_BASE, SZ_4K);
 	WARN(!da8xx_syscfg0_base, "Unable to map syscfg0 module");
+
+	davinci_clk_init(davinci_soc_info_da830.cpu_clks);
 }

arch/arm/mach-davinci/da850.c

@@ -34,9 +34,6 @@
 #include "clock.h"
 #include "mux.h"
 
-/* SoC specific clock flags */
-#define DA850_CLK_ASYNC3	BIT(16)
-
 #define DA850_PLL1_BASE		0x01e1a000
 #define DA850_TIMER64P2_BASE	0x01f0c000
 #define DA850_TIMER64P3_BASE	0x01f0d000
@@ -161,6 +158,32 @@ static struct clk pll1_sysclk3 = {
 	.div_reg	= PLLDIV3,
 };
 
+static int da850_async3_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 val;
+
+	val = readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
+
+	if (parent == &pll0_sysclk2) {
+		val &= ~CFGCHIP3_ASYNC3_CLKSRC;
+	} else if (parent == &pll1_sysclk2) {
+		val |= CFGCHIP3_ASYNC3_CLKSRC;
+	} else {
+		pr_err("Bad parent on async3 clock mux\n");
+		return -EINVAL;
+	}
+
+	writel(val, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
+
+	return 0;
+}
+
+static struct clk async3_clk = {
+	.name		= "async3",
+	.parent		= &pll1_sysclk2,
+	.set_parent	= da850_async3_set_parent,
+};
+
 static struct clk i2c0_clk = {
 	.name		= "i2c0",
 	.parent		= &pll0_aux_clk,
@@ -234,18 +257,16 @@ static struct clk uart0_clk = {
 
 static struct clk uart1_clk = {
 	.name		= "uart1",
-	.parent		= &pll0_sysclk2,
+	.parent		= &async3_clk,
 	.lpsc		= DA8XX_LPSC1_UART1,
 	.gpsc		= 1,
-	.flags		= DA850_CLK_ASYNC3,
 };
 
 static struct clk uart2_clk = {
 	.name		= "uart2",
-	.parent		= &pll0_sysclk2,
+	.parent		= &async3_clk,
 	.lpsc		= DA8XX_LPSC1_UART2,
 	.gpsc		= 1,
-	.flags		= DA850_CLK_ASYNC3,
 };
 
 static struct clk aintc_clk = {
@@ -300,10 +321,9 @@ static struct clk emac_clk = {
 
 static struct clk mcasp_clk = {
 	.name		= "mcasp",
-	.parent		= &pll0_sysclk2,
+	.parent		= &async3_clk,
 	.lpsc		= DA8XX_LPSC1_McASP0,
 	.gpsc		= 1,
-	.flags		= DA850_CLK_ASYNC3,
 };
 
 static struct clk lcdc_clk = {
@@ -355,10 +375,9 @@ static struct clk spi0_clk = {
 
 static struct clk spi1_clk = {
 	.name		= "spi1",
-	.parent		= &pll0_sysclk2,
+	.parent		= &async3_clk,
 	.lpsc		= DA8XX_LPSC1_SPI1,
 	.gpsc		= 1,
-	.flags		= DA850_CLK_ASYNC3,
 };
 
 static struct clk vpif_clk = {
@@ -386,10 +405,9 @@ static struct clk dsp_clk = {
 
 static struct clk ehrpwm_clk = {
 	.name		= "ehrpwm",
-	.parent		= &pll0_sysclk2,
+	.parent		= &async3_clk,
 	.lpsc		= DA8XX_LPSC1_PWM,
 	.gpsc		= 1,
-	.flags		= DA850_CLK_ASYNC3,
 };
 
 #define DA8XX_EHRPWM_TBCLKSYNC	BIT(12)
@@ -421,10 +439,9 @@ static struct clk ehrpwm_tbclk = {
 
 static struct clk ecap_clk = {
 	.name		= "ecap",
-	.parent		= &pll0_sysclk2,
+	.parent		= &async3_clk,
 	.lpsc		= DA8XX_LPSC1_ECAP,
 	.gpsc		= 1,
-	.flags		= DA850_CLK_ASYNC3,
 };
 
 static struct clk_lookup da850_clks[] = {
@@ -442,6 +459,7 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"pll1_aux",	&pll1_aux_clk),
 	CLK(NULL,		"pll1_sysclk2",	&pll1_sysclk2),
 	CLK(NULL,		"pll1_sysclk3",	&pll1_sysclk3),
+	CLK(NULL,		"async3",	&async3_clk),
 	CLK("i2c_davinci.1",	NULL,		&i2c0_clk),
 	CLK(NULL,		"timer0",	&timerp64_0_clk),
 	CLK("davinci-wdt",	NULL,		&timerp64_1_clk),
@@ -909,30 +927,6 @@ static struct davinci_timer_info da850_timer_info = {
 	.clocksource_id	= T0_TOP,
 };
 
-static void da850_set_async3_src(int pllnum)
-{
-	struct clk *clk, *newparent = pllnum ? &pll1_sysclk2 : &pll0_sysclk2;
-	struct clk_lookup *c;
-	unsigned int v;
-	int ret;
-
-	for (c = da850_clks; c->clk; c++) {
-		clk = c->clk;
-		if (clk->flags & DA850_CLK_ASYNC3) {
-			ret = clk_set_parent(clk, newparent);
-			WARN(ret, "DA850: unable to re-parent clock %s",
-								clk->name);
-		}
-       }
-
-	v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
-	if (pllnum)
-		v |= CFGCHIP3_ASYNC3_CLKSRC;
-	else
-		v &= ~CFGCHIP3_ASYNC3_CLKSRC;
-	__raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
-}
-
 #ifdef CONFIG_CPU_FREQ
 /*
  * Notes:
@@ -1328,15 +1322,6 @@ void __init da850_init(void)
 	if (WARN(!da8xx_syscfg1_base, "Unable to map syscfg1 module"))
 		return;
 
-	/*
-	 * Move the clock source of Async3 domain to PLL1 SYSCLK2.
-	 * This helps keeping the peripherals on this domain insulated
-	 * from CPU frequency changes caused by DVFS. The firmware sets
-	 * both PLL0 and PLL1 to the same frequency so, there should not
-	 * be any noticeable change even in non-DVFS use cases.
-	 */
-	da850_set_async3_src(1);
-
 	/* Unlock writing to PLL0 registers */
 	v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP0_REG));
 	v &= ~CFGCHIP0_PLL_MASTER_LOCK;
@@ -1346,4 +1331,6 @@ void __init da850_init(void)
 	v = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
 	v &= ~CFGCHIP3_PLL1_MASTER_LOCK;
 	__raw_writel(v, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG));
+
+	davinci_clk_init(davinci_soc_info_da850.cpu_clks);
 }

arch/arm/mach-davinci/dm355.c

@@ -1052,6 +1052,7 @@ void __init dm355_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm355);
 	davinci_map_sysmod();
+	davinci_clk_init(davinci_soc_info_dm355.cpu_clks);
 }
 
 int __init dm355_init_video(struct vpfe_config *vpfe_cfg,

arch/arm/mach-davinci/dm365.c

@@ -1176,6 +1176,7 @@ void __init dm365_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm365);
 	davinci_map_sysmod();
+	davinci_clk_init(davinci_soc_info_dm365.cpu_clks);
 }
 
 static struct resource dm365_vpss_resources[] = {

arch/arm/mach-davinci/dm644x.c

@@ -932,6 +932,7 @@ void __init dm644x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm644x);
 	davinci_map_sysmod();
+	davinci_clk_init(davinci_soc_info_dm644x.cpu_clks);
 }
 
 int __init dm644x_init_video(struct vpfe_config *vpfe_cfg,

arch/arm/mach-davinci/dm646x.c

@@ -956,6 +956,7 @@ void __init dm646x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm646x);
 	davinci_map_sysmod();
+	davinci_clk_init(davinci_soc_info_dm646x.cpu_clks);
 }
 
 static int __init dm646x_init_devices(void)

arch/arm/mach-davinci/usb-da8xx.c

+/*
+ * DA8xx USB
+ */
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_device.h>
+#include <linux/usb/musb.h>
+
+#include <mach/common.h>
+#include <mach/cputype.h>
+#include <mach/da8xx.h>
+#include <mach/irqs.h>
+
+#define DA8XX_USB0_BASE		0x01e00000
+#define DA8XX_USB1_BASE		0x01e25000
+
+#if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint	= true,
+	.num_eps	= 5,
+	.ram_bits	= 10,
+};
+
+static struct musb_hdrc_platform_data usb_data = {
+	/* OTG requires a Mini-AB connector */
+	.mode           = MUSB_OTG,
+	.clock		= "usb20",
+	.config		= &musb_config,
+};
+
+static struct resource da8xx_usb20_resources[] = {
+	{
+		.start		= DA8XX_USB0_BASE,
+		.end		= DA8XX_USB0_BASE + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IRQ_DA8XX_USB_INT,
+		.flags		= IORESOURCE_IRQ,
+		.name		= "mc",
+	},
+};
+
+static u64 usb_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device usb_dev = {
+	.name		= "musb-da8xx",
+	.id             = -1,
+	.dev = {
+		.platform_data		= &usb_data,
+		.dma_mask		= &usb_dmamask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+	},
+	.resource	= da8xx_usb20_resources,
+	.num_resources	= ARRAY_SIZE(da8xx_usb20_resources),
+};
+
+int __init da8xx_register_usb20(unsigned int mA, unsigned int potpgt)
+{
+	usb_data.power	= mA > 510 ? 255 : mA / 2;
+	usb_data.potpgt = (potpgt + 1) / 2;
+
+	return platform_device_register(&usb_dev);
+}
+
+#else
+
+int __init da8xx_register_usb20(unsigned int mA, unsigned int potpgt)
+{
+	return 0;
+}
+
+#endif  /* CONFIG_USB_MUSB_HDRC */
+
+static struct resource da8xx_usb11_resources[] = {
+	[0] = {
+		.start	= DA8XX_USB1_BASE,
+		.end	= DA8XX_USB1_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_DA8XX_IRQN,
+		.end	= IRQ_DA8XX_IRQN,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device da8xx_usb11_device = {
+	.name		= "ohci",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &da8xx_usb11_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(da8xx_usb11_resources),
+	.resource	= da8xx_usb11_resources,
+};
+
+int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
+{
+	da8xx_usb11_device.dev.platform_data = pdata;
+	return platform_device_register(&da8xx_usb11_device);
+}

arch/arm/mach-davinci/usb.c

@@ -10,14 +10,10 @@
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
-#include <mach/da8xx.h>
 #include <linux/platform_data/usb-davinci.h>
 
 #define DAVINCI_USB_OTG_BASE	0x01c64000
 
-#define DA8XX_USB0_BASE 	0x01e00000
-#define DA8XX_USB1_BASE 	0x01e25000
-
 #if IS_ENABLED(CONFIG_USB_MUSB_HDRC)
 static struct musb_hdrc_config musb_config = {
 	.multipoint	= true,
@@ -81,79 +77,10 @@ void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
 	platform_device_register(&usb_dev);
 }
 
-#ifdef CONFIG_ARCH_DAVINCI_DA8XX
-static struct resource da8xx_usb20_resources[] = {
-	{
-		.start		= DA8XX_USB0_BASE,
-		.end		= DA8XX_USB0_BASE + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IRQ_DA8XX_USB_INT,
-		.flags		= IORESOURCE_IRQ,
-		.name		= "mc",
-	},
-};
-
-int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
-{
-	usb_data.clock  = "usb20";
-	usb_data.power	= mA > 510 ? 255 : mA / 2;
-	usb_data.potpgt = (potpgt + 1) / 2;
-
-	usb_dev.resource = da8xx_usb20_resources;
-	usb_dev.num_resources = ARRAY_SIZE(da8xx_usb20_resources);
-	usb_dev.name = "musb-da8xx";
-
-	return platform_device_register(&usb_dev);
-}
-#endif	/* CONFIG_DAVINCI_DA8XX */
-
 #else
 
 void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
 {
 }
 
-#ifdef CONFIG_ARCH_DAVINCI_DA8XX
-int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
-{
-	return 0;
-}
-#endif
-
 #endif  /* CONFIG_USB_MUSB_HDRC */
-
-#ifdef	CONFIG_ARCH_DAVINCI_DA8XX
-static struct resource da8xx_usb11_resources[] = {
-	[0] = {
-		.start	= DA8XX_USB1_BASE,
-		.end	= DA8XX_USB1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DA8XX_IRQN,
-		.end	= IRQ_DA8XX_IRQN,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device da8xx_usb11_device = {
-	.name		= "ohci",
-	.id		= 0,
-	.dev = {
-		.dma_mask		= &da8xx_usb11_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(da8xx_usb11_resources),
-	.resource	= da8xx_usb11_resources,
-};
-
-int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
-{
-	da8xx_usb11_device.dev.platform_data = pdata;
-	return platform_device_register(&da8xx_usb11_device);
-}
-#endif	/* CONFIG_DAVINCI_DA8XX */

arch/arm/mach-dove/common.c

@@ -88,8 +88,7 @@ static void __init dove_clk_init(void)
 	struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma;
 	struct clk *xor0, *xor1, *ge, *gephy;
 
-	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
-				       dove_tclk);
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, dove_tclk);
 
 	usb0 = dove_register_gate("usb0", "tclk", CLOCK_GATING_BIT_USB0);
 	usb1 = dove_register_gate("usb1", "tclk", CLOCK_GATING_BIT_USB1);

arch/arm/mach-imx/Kconfig

@@ -526,7 +526,7 @@ config SOC_IMX6Q
 	bool "i.MX6 Quad/DualLite support"
 	select ARM_ERRATA_764369 if SMP
 	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
+	select HAVE_ARM_TWD
 	select PCI_DOMAINS if PCI
 	select PINCTRL_IMX6Q
 	select SOC_IMX6

arch/arm/mach-lpc32xx/common.c

@@ -17,13 +17,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/i2c-pnx.h>
-#include <linux/io.h>
 
 #include <asm/mach/map.h>
 #include <asm/system_info.h>
@@ -43,19 +36,6 @@ void lpc32xx_get_uid(u32 devid[4])
 		devid[i] = __raw_readl(LPC32XX_CLKPWR_DEVID(i << 2));
 }
 
-/*
- * Returns SYSCLK source
- * 0 = PLL397, 1 = main oscillator
- */
-int clk_is_sysclk_mainosc(void)
-{
-	if ((__raw_readl(LPC32XX_CLKPWR_SYSCLK_CTRL) &
-		LPC32XX_CLKPWR_SYSCTRL_SYSCLKMUX) == 0)
-		return 1;
-
-	return 0;
-}
-
 /*
  * Detects and returns IRAM size for the device variation
  */
@@ -87,81 +67,6 @@ u32 lpc32xx_return_iram_size(void)
 }
 EXPORT_SYMBOL_GPL(lpc32xx_return_iram_size);
 
-/*
- * Computes PLL rate from PLL register and input clock
- */
-u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup)
-{
-	u32 ilfreq, p, m, n, fcco, fref, cfreq;
-	int mode;
-
-	/*
-	 * PLL requirements
-	 * ifreq must be >= 1MHz and <= 20MHz
-	 * FCCO must be >= 156MHz and <= 320MHz
-	 * FREF must be >= 1MHz and <= 27MHz
-	 * Assume the passed input data is not valid
-	 */
-
-	ilfreq = ifreq;
-	m = pllsetup->pll_m;
-	n = pllsetup->pll_n;
-	p = pllsetup->pll_p;
-
-	mode = (pllsetup->cco_bypass_b15 << 2) |
-		(pllsetup->direct_output_b14 << 1) |
-	pllsetup->fdbk_div_ctrl_b13;
-
-	switch (mode) {
-	case 0x0: /* Non-integer mode */
-		cfreq = (m * ilfreq) / (2 * p * n);
-		fcco = (m * ilfreq) / n;
-		fref = ilfreq / n;
-		break;
-
-	case 0x1: /* integer mode */
-		cfreq = (m * ilfreq) / n;
-		fcco = (m * ilfreq) / (n * 2 * p);
-		fref = ilfreq / n;
-		break;
-
-	case 0x2:
-	case 0x3: /* Direct mode */
-		cfreq = (m * ilfreq) / n;
-		fcco = cfreq;
-		fref = ilfreq / n;
-		break;
-
-	case 0x4:
-	case 0x5: /* Bypass mode */
-		cfreq = ilfreq / (2 * p);
-		fcco = 156000000;
-		fref = 1000000;
-		break;
-
-	case 0x6:
-	case 0x7: /* Direct bypass mode */
-	default:
-		cfreq = ilfreq;
-		fcco = 156000000;
-		fref = 1000000;
-		break;
-	}
-
-	if (fcco < 156000000 || fcco > 320000000)
-		cfreq = 0;
-
-	if (fref < 1000000 || fref > 27000000)
-		cfreq = 0;
-
-	return (u32) cfreq;
-}
-
-u32 clk_get_pclk_div(void)
-{
-	return 1 + ((__raw_readl(LPC32XX_CLKPWR_HCLK_DIV) >> 2) & 0x1F);
-}
-
 static struct map_desc lpc32xx_io_desc[] __initdata = {
 	{
 		.virtual	= (unsigned long)IO_ADDRESS(LPC32XX_AHB0_START),

arch/arm/mach-lpc32xx/common.h

@@ -19,37 +19,15 @@
 #ifndef __LPC32XX_COMMON_H
 #define __LPC32XX_COMMON_H
 
-#include <mach/board.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
+#include <linux/init.h>
 
 /*
  * Other arch specific structures and functions
  */
-extern void lpc32xx_timer_init(void);
 extern void __init lpc32xx_init_irq(void);
 extern void __init lpc32xx_map_io(void);
 extern void __init lpc32xx_serial_init(void);
 
-
-/*
- * Structure used for setting up and querying the PLLS
- */
-struct clk_pll_setup {
-	int analog_on;
-	int cco_bypass_b15;
-	int direct_output_b14;
-	int fdbk_div_ctrl_b13;
-	int pll_p;
-	int pll_n;
-	u32 pll_m;
-};
-
-extern int clk_is_sysclk_mainosc(void);
-extern u32 clk_check_pll_setup(u32 ifreq, struct clk_pll_setup *pllsetup);
-extern u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval);
-extern u32 clk_get_pclk_div(void);
-
 /*
  * Returns the LPC32xx unique 128-bit chip ID
  */

arch/arm/mach-lpc32xx/phy3250.c

@@ -159,7 +159,7 @@ static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = {
 	.dma_filter = pl08x_filter_id,
 };
 
-static const struct of_dev_auxdata const lpc32xx_auxdata_lookup[] __initconst = {
+static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL),
 	OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL),
 	OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data),

arch/arm/mach-mediatek/Kconfig

@@ -10,6 +10,10 @@ menuconfig ARCH_MEDIATEK
 
 if ARCH_MEDIATEK
 
+config MACH_MT2701
+	bool "MediaTek MT2701 SoCs support"
+	default ARCH_MEDIATEK
+
 config MACH_MT6589
 	bool "MediaTek MT6589 SoCs support"
 	default ARCH_MEDIATEK

arch/arm/mach-mv78xx0/common.c

@@ -168,8 +168,7 @@ static struct clk *tclk;
 
 static void __init clk_init(void)
 {
-	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
-				       get_tclk());
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, get_tclk());
 
 	orion_clkdev_init(tclk);
 }

arch/arm/mach-omap2/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
+ccflags-y := -I$(srctree)/$(src)/include \
 	-I$(srctree)/arch/arm/plat-omap/include
 
 # Common support

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -327,6 +327,11 @@ static int irq_cpu_hotplug_notify(struct notifier_block *self,
 {
 	unsigned int cpu = (unsigned int)hcpu;
 
+	/*
+	 * Corresponding FROZEN transitions do not have to be handled,
+	 * they are handled by at a higher level
+	 * (drivers/cpuidle/coupled.c).
+	 */
 	switch (action) {
 	case CPU_ONLINE:
 		wakeupgen_irqmask_all(cpu, 0);

arch/arm/mach-omap2/omap_hwmod.c

@@ -2207,15 +2207,15 @@ static int _idle(struct omap_hwmod *oh)
 
 	pr_debug("omap_hwmod: %s: idling\n", oh->name);
 
+	if (_are_all_hardreset_lines_asserted(oh))
+		return 0;
+
 	if (oh->_state != _HWMOD_STATE_ENABLED) {
 		WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n",
 			oh->name);
 		return -EINVAL;
 	}
 
-	if (_are_all_hardreset_lines_asserted(oh))
-		return 0;
-
 	if (oh->class->sysc)
 		_idle_sysc(oh);
 	_del_initiator_dep(oh, mpu_oh);
@@ -2262,6 +2262,9 @@ static int _shutdown(struct omap_hwmod *oh)
 	int ret, i;
 	u8 prev_state;
 
+	if (_are_all_hardreset_lines_asserted(oh))
+		return 0;
+
 	if (oh->_state != _HWMOD_STATE_IDLE &&
 	    oh->_state != _HWMOD_STATE_ENABLED) {
 		WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n",
@@ -2269,9 +2272,6 @@ static int _shutdown(struct omap_hwmod *oh)
 		return -EINVAL;
 	}
 
-	if (_are_all_hardreset_lines_asserted(oh))
-		return 0;
-
 	pr_debug("omap_hwmod: %s: disabling\n", oh->name);
 
 	if (oh->class->pre_shutdown) {

arch/arm/mach-omap2/omap_hwmod.h

@@ -754,6 +754,8 @@ const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
  */
 
 extern int omap_hwmod_aess_preprogram(struct omap_hwmod *oh);
+void omap_hwmod_rtc_unlock(struct omap_hwmod *oh);
+void omap_hwmod_rtc_lock(struct omap_hwmod *oh);
 
 /*
  * Chip variant-specific hwmod init routines - XXX should be converted

arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c

@@ -918,6 +918,8 @@ static struct omap_hwmod_class_sysconfig am33xx_rtc_sysc = {
 static struct omap_hwmod_class am33xx_rtc_hwmod_class = {
 	.name		= "rtc",
 	.sysc		= &am33xx_rtc_sysc,
+	.unlock		= &omap_hwmod_rtc_unlock,
+	.lock		= &omap_hwmod_rtc_lock,
 };
 
 struct omap_hwmod am33xx_rtc_hwmod = {

arch/arm/mach-omap2/omap_hwmod_reset.c

@@ -29,6 +29,16 @@
 #include <sound/aess.h>
 
 #include "omap_hwmod.h"
+#include "common.h"
+
+#define OMAP_RTC_STATUS_REG	0x44
+#define OMAP_RTC_KICK0_REG	0x6c
+#define OMAP_RTC_KICK1_REG	0x70
+
+#define OMAP_RTC_KICK0_VALUE	0x83E70B13
+#define OMAP_RTC_KICK1_VALUE	0x95A4F1E0
+#define OMAP_RTC_STATUS_BUSY	BIT(0)
+#define OMAP_RTC_MAX_READY_TIME	50
 
 /**
  * omap_hwmod_aess_preprogram - enable AESS internal autogating
@@ -51,3 +61,58 @@ int omap_hwmod_aess_preprogram(struct omap_hwmod *oh)
 
 	return 0;
 }
+
+/**
+ * omap_rtc_wait_not_busy - Wait for the RTC BUSY flag
+ * @oh: struct omap_hwmod *
+ *
+ * For updating certain RTC registers, the MPU must wait
+ * for the BUSY status in OMAP_RTC_STATUS_REG to become zero.
+ * Once the BUSY status is zero, there is a 15 microseconds access
+ * period in which the MPU can program.
+ */
+static void omap_rtc_wait_not_busy(struct omap_hwmod *oh)
+{
+	int i;
+
+	/* BUSY may stay active for 1/32768 second (~30 usec) */
+	omap_test_timeout(omap_hwmod_read(oh, OMAP_RTC_STATUS_REG)
+			  & OMAP_RTC_STATUS_BUSY, OMAP_RTC_MAX_READY_TIME, i);
+	/* now we have ~15 microseconds to read/write various registers */
+}
+
+/**
+ * omap_hwmod_rtc_unlock - Unlock the Kicker mechanism.
+ * @oh: struct omap_hwmod *
+ *
+ * RTC IP have kicker feature. This prevents spurious writes to its registers.
+ * In order to write into any of the RTC registers, KICK values has te be
+ * written in respective KICK registers. This is needed for hwmod to write into
+ * sysconfig register.
+ */
+void omap_hwmod_rtc_unlock(struct omap_hwmod *oh)
+{
+	local_irq_disable();
+	omap_rtc_wait_not_busy(oh);
+	omap_hwmod_write(OMAP_RTC_KICK0_VALUE, oh, OMAP_RTC_KICK0_REG);
+	omap_hwmod_write(OMAP_RTC_KICK1_VALUE, oh, OMAP_RTC_KICK1_REG);
+	local_irq_enable();
+}
+
+/**
+ * omap_hwmod_rtc_lock - Lock the Kicker mechanism.
+ * @oh: struct omap_hwmod *
+ *
+ * RTC IP have kicker feature. This prevents spurious writes to its registers.
+ * Once the RTC registers are written, KICK mechanism needs to be locked,
+ * in order to prevent any spurious writes. This function locks back the RTC
+ * registers once hwmod completes its write into sysconfig register.
+ */
+void omap_hwmod_rtc_lock(struct omap_hwmod *oh)
+{
+	local_irq_disable();
+	omap_rtc_wait_not_busy(oh);
+	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK0_REG);
+	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK1_REG);
+	local_irq_enable();
+}

arch/arm/mach-omap2/powerdomains7xx_data.c

@@ -35,7 +35,7 @@ static struct powerdomain iva_7xx_pwrdm = {
 	.name		  = "iva_pwrdm",
 	.prcm_offs	  = DRA7XX_PRM_IVA_INST,
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts		  = PWRSTS_OFF_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF,
 	.banks		  = 4,
 	.pwrsts_mem_ret	= {
@@ -45,10 +45,10 @@ static struct powerdomain iva_7xx_pwrdm = {
 		[3] = PWRSTS_OFF_RET,	/* tcm2_mem */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* hwa_mem */
-		[1] = PWRSTS_OFF_RET,	/* sl2_mem */
-		[2] = PWRSTS_OFF_RET,	/* tcm1_mem */
-		[3] = PWRSTS_OFF_RET,	/* tcm2_mem */
+		[0] = PWRSTS_ON,	/* hwa_mem */
+		[1] = PWRSTS_ON,	/* sl2_mem */
+		[2] = PWRSTS_ON,	/* tcm1_mem */
+		[3] = PWRSTS_ON,	/* tcm2_mem */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -75,7 +75,7 @@ static struct powerdomain ipu_7xx_pwrdm = {
 	.name		  = "ipu_pwrdm",
 	.prcm_offs	  = DRA7XX_PRM_IPU_INST,
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts		  = PWRSTS_OFF_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF,
 	.banks		  = 2,
 	.pwrsts_mem_ret	= {
@@ -83,8 +83,8 @@ static struct powerdomain ipu_7xx_pwrdm = {
 		[1] = PWRSTS_OFF_RET,	/* periphmem */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* aessmem */
-		[1] = PWRSTS_OFF_RET,	/* periphmem */
+		[0] = PWRSTS_ON,	/* aessmem */
+		[1] = PWRSTS_ON,	/* periphmem */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -94,14 +94,14 @@ static struct powerdomain dss_7xx_pwrdm = {
 	.name		  = "dss_pwrdm",
 	.prcm_offs	  = DRA7XX_PRM_DSS_INST,
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts		  = PWRSTS_OFF_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF,
 	.banks		  = 1,
 	.pwrsts_mem_ret	= {
 		[0] = PWRSTS_OFF_RET,	/* dss_mem */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* dss_mem */
+		[0] = PWRSTS_ON,	/* dss_mem */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -112,15 +112,15 @@ static struct powerdomain l4per_7xx_pwrdm = {
 	.prcm_offs	  = DRA7XX_PRM_L4PER_INST,
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
 	.pwrsts		  = PWRSTS_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.pwrsts_logic_ret = PWRSTS_RET,
 	.banks		  = 2,
 	.pwrsts_mem_ret	= {
 		[0] = PWRSTS_OFF_RET,	/* nonretained_bank */
 		[1] = PWRSTS_OFF_RET,	/* retained_bank */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* nonretained_bank */
-		[1] = PWRSTS_OFF_RET,	/* retained_bank */
+		[0] = PWRSTS_ON,	/* nonretained_bank */
+		[1] = PWRSTS_ON,	/* retained_bank */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -136,7 +136,7 @@ static struct powerdomain gpu_7xx_pwrdm = {
 		[0] = PWRSTS_OFF_RET,	/* gpu_mem */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* gpu_mem */
+		[0] = PWRSTS_ON,	/* gpu_mem */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -160,7 +160,7 @@ static struct powerdomain core_7xx_pwrdm = {
 	.name		  = "core_pwrdm",
 	.prcm_offs	  = DRA7XX_PRM_CORE_INST,
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_INA_ON,
+	.pwrsts		  = PWRSTS_ON,
 	.pwrsts_logic_ret = PWRSTS_RET,
 	.banks		  = 5,
 	.pwrsts_mem_ret	= {
@@ -171,11 +171,11 @@ static struct powerdomain core_7xx_pwrdm = {
 		[4] = PWRSTS_OFF_RET,	/* ipu_unicache */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* core_nret_bank */
-		[1] = PWRSTS_OFF_RET,	/* core_ocmram */
-		[2] = PWRSTS_OFF_RET,	/* core_other_bank */
-		[3] = PWRSTS_OFF_RET,	/* ipu_l2ram */
-		[4] = PWRSTS_OFF_RET,	/* ipu_unicache */
+		[0] = PWRSTS_ON,	/* core_nret_bank */
+		[1] = PWRSTS_ON,	/* core_ocmram */
+		[2] = PWRSTS_ON,	/* core_other_bank */
+		[3] = PWRSTS_ON,	/* ipu_l2ram */
+		[4] = PWRSTS_ON,	/* ipu_unicache */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -225,14 +225,14 @@ static struct powerdomain vpe_7xx_pwrdm = {
 	.name		  = "vpe_pwrdm",
 	.prcm_offs	  = DRA7XX_PRM_VPE_INST,
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.pwrsts		  = PWRSTS_OFF_ON,
+	.pwrsts_logic_ret = PWRSTS_OFF,
 	.banks		  = 1,
 	.pwrsts_mem_ret	= {
 		[0] = PWRSTS_OFF_RET,	/* vpe_bank */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* vpe_bank */
+		[0] = PWRSTS_ON,	/* vpe_bank */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -250,8 +250,8 @@ static struct powerdomain mpu_7xx_pwrdm = {
 		[1] = PWRSTS_RET,	/* mpu_ram */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* mpu_l2 */
-		[1] = PWRSTS_OFF_RET,	/* mpu_ram */
+		[0] = PWRSTS_ON,	/* mpu_l2 */
+		[1] = PWRSTS_ON,	/* mpu_ram */
 	},
 };
 
@@ -261,7 +261,7 @@ static struct powerdomain l3init_7xx_pwrdm = {
 	.prcm_offs	  = DRA7XX_PRM_L3INIT_INST,
 	.prcm_partition	  = DRA7XX_PRM_PARTITION,
 	.pwrsts		  = PWRSTS_RET_ON,
-	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.pwrsts_logic_ret = PWRSTS_RET,
 	.banks		  = 3,
 	.pwrsts_mem_ret	= {
 		[0] = PWRSTS_OFF_RET,	/* gmac_bank */
@@ -269,9 +269,9 @@ static struct powerdomain l3init_7xx_pwrdm = {
 		[2] = PWRSTS_OFF_RET,	/* l3init_bank2 */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* gmac_bank */
-		[1] = PWRSTS_OFF_RET,	/* l3init_bank1 */
-		[2] = PWRSTS_OFF_RET,	/* l3init_bank2 */
+		[0] = PWRSTS_ON,	/* gmac_bank */
+		[1] = PWRSTS_ON,	/* l3init_bank1 */
+		[2] = PWRSTS_ON,	/* l3init_bank2 */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -287,7 +287,7 @@ static struct powerdomain eve3_7xx_pwrdm = {
 		[0] = PWRSTS_OFF_RET,	/* eve3_bank */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* eve3_bank */
+		[0] = PWRSTS_ON,	/* eve3_bank */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -303,7 +303,7 @@ static struct powerdomain emu_7xx_pwrdm = {
 		[0] = PWRSTS_OFF_RET,	/* emu_bank */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* emu_bank */
+		[0] = PWRSTS_ON,	/* emu_bank */
 	},
 };
 
@@ -320,9 +320,9 @@ static struct powerdomain dsp2_7xx_pwrdm = {
 		[2] = PWRSTS_OFF_RET,	/* dsp2_l2 */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* dsp2_edma */
-		[1] = PWRSTS_OFF_RET,	/* dsp2_l1 */
-		[2] = PWRSTS_OFF_RET,	/* dsp2_l2 */
+		[0] = PWRSTS_ON,	/* dsp2_edma */
+		[1] = PWRSTS_ON,	/* dsp2_l1 */
+		[2] = PWRSTS_ON,	/* dsp2_l2 */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -340,9 +340,9 @@ static struct powerdomain dsp1_7xx_pwrdm = {
 		[2] = PWRSTS_OFF_RET,	/* dsp1_l2 */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* dsp1_edma */
-		[1] = PWRSTS_OFF_RET,	/* dsp1_l1 */
-		[2] = PWRSTS_OFF_RET,	/* dsp1_l2 */
+		[0] = PWRSTS_ON,	/* dsp1_edma */
+		[1] = PWRSTS_ON,	/* dsp1_l1 */
+		[2] = PWRSTS_ON,	/* dsp1_l2 */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -358,7 +358,7 @@ static struct powerdomain cam_7xx_pwrdm = {
 		[0] = PWRSTS_OFF_RET,	/* vip_bank */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* vip_bank */
+		[0] = PWRSTS_ON,	/* vip_bank */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -374,7 +374,7 @@ static struct powerdomain eve4_7xx_pwrdm = {
 		[0] = PWRSTS_OFF_RET,	/* eve4_bank */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* eve4_bank */
+		[0] = PWRSTS_ON,	/* eve4_bank */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -390,7 +390,7 @@ static struct powerdomain eve2_7xx_pwrdm = {
 		[0] = PWRSTS_OFF_RET,	/* eve2_bank */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* eve2_bank */
+		[0] = PWRSTS_ON,	/* eve2_bank */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };
@@ -406,7 +406,7 @@ static struct powerdomain eve1_7xx_pwrdm = {
 		[0] = PWRSTS_OFF_RET,	/* eve1_bank */
 	},
 	.pwrsts_mem_on	= {
-		[0] = PWRSTS_OFF_RET,	/* eve1_bank */
+		[0] = PWRSTS_ON,	/* eve1_bank */
 	},
 	.flags		  = PWRDM_HAS_LOWPOWERSTATECHANGE,
 };

arch/arm/mach-omap2/soc.h

@@ -39,82 +39,10 @@
 #include <linux/of.h>
 
 /*
- * Test if multicore OMAP support is needed
+ * OMAP2+ is always defined as ARCH_MULTIPLATFORM in Kconfig
  */
 #undef MULTI_OMAP2
-#undef OMAP_NAME
-
-#ifdef CONFIG_ARCH_MULTIPLATFORM
 #define MULTI_OMAP2
-#endif
-#ifdef CONFIG_SOC_OMAP2420
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2420
-# endif
-#endif
-#ifdef CONFIG_SOC_OMAP2430
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap2430
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP3
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap3
-# endif
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap4
-# endif
-#endif
-
-#ifdef CONFIG_SOC_OMAP5
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME omap5
-# endif
-#endif
-
-#ifdef CONFIG_SOC_AM33XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME am33xx
-# endif
-#endif
-
-#ifdef CONFIG_SOC_AM43XX
-# ifdef OMAP_NAME
-#  undef  MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME am43xx
-# endif
-#endif
-
-#ifdef CONFIG_SOC_DRA7XX
-# ifdef OMAP_NAME
-#  undef MULTI_OMAP2
-#  define MULTI_OMAP2
-# else
-#  define OMAP_NAME DRA7XX
-# endif
-#endif
 
 /*
  * Omap device type i.e. EMU/HS/TST/GP/BAD
@@ -242,11 +170,6 @@ IS_AM_SUBCLASS(437x, 0x437)
 IS_DRA_SUBCLASS(75x, 0x75)
 IS_DRA_SUBCLASS(72x, 0x72)
 
-#define soc_is_omap24xx()		0
-#define soc_is_omap242x()		0
-#define soc_is_omap243x()		0
-#define soc_is_omap34xx()		0
-#define soc_is_omap343x()		0
 #define soc_is_ti81xx()			0
 #define soc_is_ti816x()			0
 #define soc_is_ti814x()			0
@@ -265,46 +188,27 @@ IS_DRA_SUBCLASS(72x, 0x72)
 #define soc_is_dra74x()			0
 #define soc_is_dra72x()			0
 
-#if defined(MULTI_OMAP2)
-# if defined(CONFIG_ARCH_OMAP2)
-#  undef  soc_is_omap24xx
-#  define soc_is_omap24xx()		is_omap24xx()
-# endif
-# if defined (CONFIG_SOC_OMAP2420)
-#  undef  soc_is_omap242x
-#  define soc_is_omap242x()		is_omap242x()
-# endif
-# if defined (CONFIG_SOC_OMAP2430)
-#  undef  soc_is_omap243x
-#  define soc_is_omap243x()		is_omap243x()
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-#  undef  soc_is_omap34xx
-#  undef  soc_is_omap343x
-#  define soc_is_omap34xx()		is_omap34xx()
-#  define soc_is_omap343x()		is_omap343x()
-# endif
+#if defined(CONFIG_ARCH_OMAP2)
+# define soc_is_omap24xx()		is_omap24xx()
 #else
-# if defined(CONFIG_ARCH_OMAP2)
-#  undef  soc_is_omap24xx
-#  define soc_is_omap24xx()		1
-# endif
-# if defined(CONFIG_SOC_OMAP2420)
-#  undef  soc_is_omap242x
-#  define soc_is_omap242x()		1
-# endif
-# if defined(CONFIG_SOC_OMAP2430)
-#  undef  soc_is_omap243x
-#  define soc_is_omap243x()		1
-# endif
-# if defined(CONFIG_ARCH_OMAP3)
-#  undef  soc_is_omap34xx
-#  define soc_is_omap34xx()		1
-# endif
-# if defined(CONFIG_SOC_OMAP3430)
-#  undef  soc_is_omap343x
-#  define soc_is_omap343x()		1
-# endif
+# define soc_is_omap24xx()		0
+#endif
+#if defined(CONFIG_SOC_OMAP2420)
+# define soc_is_omap242x()		is_omap242x()
+#else
+# define soc_is_omap242x()		0
+#endif
+#if defined(CONFIG_SOC_OMAP2430)
+# define soc_is_omap243x()		is_omap243x()
+#else
+# define soc_is_omap243x()		0
+#endif
+#if defined(CONFIG_ARCH_OMAP3)
+# define soc_is_omap34xx()		is_omap34xx()
+# define soc_is_omap343x()		is_omap343x()
+#else
+# define soc_is_omap34xx()		0
+# define soc_is_omap343x()		0
 #endif
 
 /*
@@ -339,7 +243,6 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define soc_is_omap5430()		0
 
 /* These are needed for the common code */
-#ifdef CONFIG_ARCH_OMAP2PLUS
 #define soc_is_omap7xx()		0
 #define soc_is_omap15xx()		0
 #define soc_is_omap16xx()		0
@@ -350,7 +253,6 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define soc_is_omap1710()		0
 #define cpu_class_is_omap1()		0
 #define cpu_class_is_omap2()		1
-#endif
 
 #if defined(CONFIG_ARCH_OMAP2)
 # undef  soc_is_omap2420

arch/arm/mach-orion5x/common.c

@@ -66,8 +66,7 @@ static struct clk *tclk;
 
 void __init clk_init(void)
 {
-	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT,
-				       orion5x_tclk);
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, orion5x_tclk);
 
 	orion_clkdev_init(tclk);
 }

arch/arm/mach-oxnas/Kconfig

+menuconfig ARCH_OXNAS
+	bool "Oxford Semiconductor OXNAS Family SoCs"
+	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_RESET_CONTROLLER
+	select PINCTRL
+	depends on ARCH_MULTI_V5
+	help
+	  Support for OxNas SoC family developed by Oxford Semiconductor.
+
+if ARCH_OXNAS
+
+config MACH_OX810SE
+	bool "Support OX810SE Based Products"
+	select ARM_TIMER_SP804
+	select COMMON_CLK_OXNAS
+	select CPU_ARM926T
+	select MFD_SYSCON
+	select PINCTRL_OXNAS
+	select RESET_OXNAS
+	select VERSATILE_FPGA_IRQ
+	help
+	  Include Support for the Oxford Semiconductor OX810SE SoC Based Products.
+
+endif

arch/arm/mach-shmobile/timer.c

@@ -20,28 +20,9 @@
 
 #include "common.h"
 
-static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
-					   unsigned int mult, unsigned int div)
-{
-	/* calculate a worst-case loops-per-jiffy value
-	 * based on maximum cpu core hz setting and the
-	 * __delay() implementation in arch/arm/lib/delay.S
-	 *
-	 * this will result in a longer delay than expected
-	 * when the cpu core runs on lower frequencies.
-	 */
-
-	unsigned int value = HZ * div / mult;
-
-	if (!preset_lpj)
-		preset_lpj = max_cpu_core_hz / value;
-}
-
 void __init shmobile_init_delay(void)
 {
 	struct device_node *np, *cpus;
-	unsigned int div = 0;
-	bool has_arch_timer = false;
 	u32 max_freq = 0;
 
 	cpus = of_find_node_by_path("/cpus");
@@ -51,25 +32,32 @@ void __init shmobile_init_delay(void)
 	for_each_child_of_node(cpus, np) {
 		u32 freq;
 
+		if (IS_ENABLED(CONFIG_ARM_ARCH_TIMER) &&
+		    (of_device_is_compatible(np, "arm,cortex-a7") ||
+		     of_device_is_compatible(np, "arm,cortex-a15"))) {
+			of_node_put(np);
+			of_node_put(cpus);
+			return;
+		}
+
 		if (!of_property_read_u32(np, "clock-frequency", &freq))
 			max_freq = max(max_freq, freq);
-
-		if (of_device_is_compatible(np, "arm,cortex-a8")) {
-			div = 2;
-		} else if (of_device_is_compatible(np, "arm,cortex-a9")) {
-			div = 1;
-		} else if (of_device_is_compatible(np, "arm,cortex-a7") ||
-			 of_device_is_compatible(np, "arm,cortex-a15")) {
-			div = 1;
-			has_arch_timer = true;
-		}
 	}
 
 	of_node_put(cpus);
 
-	if (!max_freq || !div)
+	if (!max_freq)
 		return;
 
-	if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
-		shmobile_setup_delay_hz(max_freq, 1, div);
+	/*
+	 * Calculate a worst-case loops-per-jiffy value
+	 * based on maximum cpu core hz setting and the
+	 * __delay() implementation in arch/arm/lib/delay.S.
+	 *
+	 * This will result in a longer delay than expected
+	 * when the cpu core runs on lower frequencies.
+	 */
+
+	if (!preset_lpj)
+		preset_lpj = max_freq / HZ;
 }

arch/arm/mach-sti/Kconfig

@@ -18,11 +18,10 @@ menuconfig ARCH_STI
 	select PL310_ERRATA_769419 if CACHE_L2X0
 	select RESET_CONTROLLER
 	help
-	  Include support for STiH41x SOCs like STiH415/416 using the device tree
-	  for discovery
-	  More information at Documentation/arm/STiH41x and
-	  at Documentation/devicetree
-
+	  Include support for STMicroelectronics' STiH415/416, STiH407/10 and
+	  STiH418 family SoCs using the Device Tree for discovery.  More
+	  information can be found in Documentation/arm/sti/ and
+	  Documentation/devicetree.
 
 if ARCH_STI
 

arch/arm/mach-uniphier/platsmp.c

@@ -99,16 +99,16 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus)
 	int ret;
 
 	np = of_find_compatible_node(NULL, NULL, "socionext,uniphier-smpctrl");
-	of_node_put(np);
 	ret = of_address_to_resource(np, 0, &res);
+	of_node_put(np);
 	if (!ret) {
 		rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2;
 	} else {
 		/* try old binding too */
 		np = of_find_compatible_node(NULL, NULL,
 					     "socionext,uniphier-system-bus-controller");
-		of_node_put(np);
 		ret = of_address_to_resource(np, 1, &res);
+		of_node_put(np);
 		if (ret) {
 			pr_err("failed to get resource of SMP control\n");
 			return ret;

arch/arm/mach-vexpress/Makefile

@@ -4,7 +4,7 @@
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := \
 	-I$(srctree)/arch/arm/plat-versatile/include
 
-obj-y					:= v2m.o
+obj-$(CONFIG_ARCH_VEXPRESS)		:= v2m.o
 obj-$(CONFIG_ARCH_VEXPRESS_DCSCB)	+= dcscb.o	dcscb_setup.o
 CFLAGS_dcscb.o				+= -march=armv7-a
 CFLAGS_REMOVE_dcscb.o			= -pg
@@ -15,3 +15,5 @@ CFLAGS_tc2_pm.o				+= -march=armv7-a
 CFLAGS_REMOVE_tc2_pm.o			= -pg
 obj-$(CONFIG_SMP)			+= platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
+
+obj-$(CONFIG_ARCH_MPS2)			+= v2m-mps2.o

arch/arm/mach-vexpress/Makefile.boot

+# Empty file waiting for deletion once Makefile.boot isn't needed any more.
+# Patch waits for application at
+# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .

arch/arm/mach-vexpress/v2m-mps2.c

+/*
+ * Copyright (C) 2015 ARM Limited
+ *
+ * Author: Vladimir Murzin <vladimir.murzin@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <asm/mach/arch.h>
+
+static const char *const mps2_compat[] __initconst = {
+	"arm,mps2",
+	NULL
+};
+
+DT_MACHINE_START(MPS2DT, "MPS2 (Device Tree Support)")
+	.dt_compat = mps2_compat,
+MACHINE_END

drivers/irqchip/irq-versatile-fpga.c

@@ -227,4 +227,5 @@ int __init fpga_irq_of_init(struct device_node *node,
 }
 IRQCHIP_DECLARE(arm_fpga, "arm,versatile-fpga-irq", fpga_irq_of_init);
 IRQCHIP_DECLARE(arm_fpga_sic, "arm,versatile-sic", fpga_irq_of_init);
+IRQCHIP_DECLARE(ox810se_rps, "oxsemi,ox810se-rps-irq", fpga_irq_of_init);
 #endif