Commit 98ab2c93 authored by Alexandre Belloni's avatar Alexandre Belloni

rtc: whitespace fixes

Some entries in the Kconfig are improperly indented with spaces instead of
tabs.
Also fix whitespaces in Makefile.
Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
parent 35cd49c1
......@@ -12,7 +12,7 @@ menuconfig RTC_CLASS
select RTC_LIB
help
Generic RTC class support. If you say yes here, you will
be allowed to plug one or more RTCs to your system. You will
be allowed to plug one or more RTCs to your system. You will
probably want to enable one or more of the interfaces below.
if RTC_CLASS
......@@ -165,10 +165,10 @@ config RTC_DRV_88PM80X
will be called rtc-88pm80x.
config RTC_DRV_ABB5ZES3
depends on I2C
select REGMAP_I2C
tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3"
help
depends on I2C
select REGMAP_I2C
tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3"
help
If you say yes here you get support for the Abracon
AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip.
......@@ -376,10 +376,10 @@ config RTC_DRV_ISL12022
will be called rtc-isl12022.
config RTC_DRV_ISL12057
depends on I2C
select REGMAP_I2C
tristate "Intersil ISL12057"
help
depends on I2C
select REGMAP_I2C
tristate "Intersil ISL12057"
help
If you say yes here you get support for the Intersil ISL12057
I2C RTC chip.
......@@ -614,13 +614,13 @@ comment "SPI RTC drivers"
if SPI_MASTER
config RTC_DRV_M41T93
tristate "ST M41T93"
help
If you say yes here you will get support for the
ST M41T93 SPI RTC chip.
tristate "ST M41T93"
help
If you say yes here you will get support for the
ST M41T93 SPI RTC chip.
This driver can also be built as a module. If so, the module
will be called rtc-m41t93.
This driver can also be built as a module. If so, the module
will be called rtc-m41t93.
config RTC_DRV_M41T94
tristate "ST M41T94"
......@@ -1211,7 +1211,7 @@ config RTC_DRV_SH
Say Y here to enable support for the on-chip RTC found in
most SuperH processors.
To compile this driver as a module, choose M here: the
To compile this driver as a module, choose M here: the
module will be called rtc-sh.
config RTC_DRV_VR41XX
......@@ -1310,14 +1310,14 @@ config RTC_DRV_GENERIC
just say Y.
config RTC_DRV_PXA
tristate "PXA27x/PXA3xx"
depends on ARCH_PXA
help
If you say Y here you will get access to the real time clock
built into your PXA27x or PXA3xx CPU.
This RTC driver uses PXA RTC registers available since pxa27x
series (RDxR, RYxR) instead of legacy RCNR, RTAR.
tristate "PXA27x/PXA3xx"
depends on ARCH_PXA
help
If you say Y here you will get access to the real time clock
built into your PXA27x or PXA3xx CPU.
This RTC driver uses PXA RTC registers available since pxa27x
series (RDxR, RYxR) instead of legacy RCNR, RTAR.
config RTC_DRV_VT8500
tristate "VIA/WonderMedia 85xx SoC RTC"
......
......@@ -14,14 +14,14 @@ ifdef CONFIG_RTC_DRV_EFI
rtc-core-y += rtc-efi-platform.o
endif
rtc-core-$(CONFIG_RTC_INTF_DEV) += rtc-dev.o
rtc-core-$(CONFIG_RTC_INTF_PROC) += rtc-proc.o
rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o
rtc-core-$(CONFIG_RTC_INTF_DEV) += rtc-dev.o
rtc-core-$(CONFIG_RTC_INTF_PROC) += rtc-proc.o
rtc-core-$(CONFIG_RTC_INTF_SYSFS) += rtc-sysfs.o
# Keep the list ordered.
obj-$(CONFIG_RTC_DRV_88PM80X) += rtc-88pm80x.o
obj-$(CONFIG_RTC_DRV_88PM860X) += rtc-88pm860x.o
obj-$(CONFIG_RTC_DRV_88PM860X) += rtc-88pm860x.o
obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o
obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o
obj-$(CONFIG_RTC_DRV_ABB5ZES3) += rtc-ab-b5ze-s3.o
......@@ -57,7 +57,7 @@ obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o
obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
obj-$(CONFIG_RTC_DRV_DS1685_FAMILY) += rtc-ds1685.o
obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o
obj-$(CONFIG_RTC_DRV_DS2404) += rtc-ds2404.o
obj-$(CONFIG_RTC_DRV_DS2404) += rtc-ds2404.o
obj-$(CONFIG_RTC_DRV_DS3232) += rtc-ds3232.o
obj-$(CONFIG_RTC_DRV_DS3234) += rtc-ds3234.o
obj-$(CONFIG_RTC_DRV_EFI) += rtc-efi.o
......@@ -85,7 +85,7 @@ obj-$(CONFIG_RTC_DRV_M48T86) += rtc-m48t86.o
obj-$(CONFIG_RTC_DRV_MAX6900) += rtc-max6900.o
obj-$(CONFIG_RTC_DRV_MAX6902) += rtc-max6902.o
obj-$(CONFIG_RTC_DRV_MAX77686) += rtc-max77686.o
obj-$(CONFIG_RTC_DRV_MAX77802) += rtc-max77802.o
obj-$(CONFIG_RTC_DRV_MAX77802) += rtc-max77802.o
obj-$(CONFIG_RTC_DRV_MAX8907) += rtc-max8907.o
obj-$(CONFIG_RTC_DRV_MAX8925) += rtc-max8925.o
obj-$(CONFIG_RTC_DRV_MAX8997) += rtc-max8997.o
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment