Merge tag 'dm-3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm

Pull device-mapper changes from Alasdair G Kergon:
 "Add a device-mapper target called dm-switch to provide a multipath
  framework for storage arrays that dynamically reconfigure their
  preferred paths for different device regions.

  Fix a bug in the verity target that prevented its use with some
  specific sizes of devices.

  Improve some locking mechanisms in the device-mapper core and bufio.

  Add Mike Snitzer as a device-mapper maintainer.

  A few more clean-ups and fixes"

* tag 'dm-3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm: add switch target
  dm: update maintainers
  dm: optimize reorder structure
  dm: optimize use SRCU and RCU
  dm bufio: submit writes outside lock
  dm cache: fix arm link errors with inline
  dm verity: use __ffs and __fls
  dm flakey: correct ctr alloc failure mesg
  dm verity: remove pointless comparison
  dm: use __GFP_HIGHMEM in __vmalloc
  dm verity: fix inability to use a few specific devices sizes
  dm ioctl: set noio flag to avoid __vmalloc deadlock
  dm mpath: fix ioctl deadlock when no paths

Documentation/device-mapper/switch.txt

+dm-switch
+=========
+
+The device-mapper switch target creates a device that supports an
+arbitrary mapping of fixed-size regions of I/O across a fixed set of
+paths.  The path used for any specific region can be switched
+dynamically by sending the target a message.
+
+It maps I/O to underlying block devices efficiently when there is a large
+number of fixed-sized address regions but there is no simple pattern
+that would allow for a compact representation of the mapping such as
+dm-stripe.
+
+Background
+----------
+
+Dell EqualLogic and some other iSCSI storage arrays use a distributed
+frameless architecture.  In this architecture, the storage group
+consists of a number of distinct storage arrays ("members") each having
+independent controllers, disk storage and network adapters.  When a LUN
+is created it is spread across multiple members.  The details of the
+spreading are hidden from initiators connected to this storage system.
+The storage group exposes a single target discovery portal, no matter
+how many members are being used.  When iSCSI sessions are created, each
+session is connected to an eth port on a single member.  Data to a LUN
+can be sent on any iSCSI session, and if the blocks being accessed are
+stored on another member the I/O will be forwarded as required.  This
+forwarding is invisible to the initiator.  The storage layout is also
+dynamic, and the blocks stored on disk may be moved from member to
+member as needed to balance the load.
+
+This architecture simplifies the management and configuration of both
+the storage group and initiators.  In a multipathing configuration, it
+is possible to set up multiple iSCSI sessions to use multiple network
+interfaces on both the host and target to take advantage of the
+increased network bandwidth.  An initiator could use a simple round
+robin algorithm to send I/O across all paths and let the storage array
+members forward it as necessary, but there is a performance advantage to
+sending data directly to the correct member.
+
+A device-mapper table already lets you map different regions of a
+device onto different targets.  However in this architecture the LUN is
+spread with an address region size on the order of 10s of MBs, which
+means the resulting table could have more than a million entries and
+consume far too much memory.
+
+Using this device-mapper switch target we can now build a two-layer
+device hierarchy:
+
+    Upper Tier – Determine which array member the I/O should be sent to.
+    Lower Tier – Load balance amongst paths to a particular member.
+
+The lower tier consists of a single dm multipath device for each member.
+Each of these multipath devices contains the set of paths directly to
+the array member in one priority group, and leverages existing path
+selectors to load balance amongst these paths.  We also build a
+non-preferred priority group containing paths to other array members for
+failover reasons.
+
+The upper tier consists of a single dm-switch device.  This device uses
+a bitmap to look up the location of the I/O and choose the appropriate
+lower tier device to route the I/O.  By using a bitmap we are able to
+use 4 bits for each address range in a 16 member group (which is very
+large for us).  This is a much denser representation than the dm table
+b-tree can achieve.
+
+Construction Parameters
+=======================
+
+    <num_paths> <region_size> <num_optional_args> [<optional_args>...]
+    [<dev_path> <offset>]+
+
+<num_paths>
+    The number of paths across which to distribute the I/O.
+
+<region_size>
+    The number of 512-byte sectors in a region. Each region can be redirected
+    to any of the available paths.
+
+<num_optional_args>
+    The number of optional arguments. Currently, no optional arguments
+    are supported and so this must be zero.
+
+<dev_path>
+    The block device that represents a specific path to the device.
+
+<offset>
+    The offset of the start of data on the specific <dev_path> (in units
+    of 512-byte sectors). This number is added to the sector number when
+    forwarding the request to the specific path. Typically it is zero.
+
+Messages
+========
+
+set_region_mappings <index>:<path_nr> [<index>]:<path_nr> [<index>]:<path_nr>...
+
+Modify the region table by specifying which regions are redirected to
+which paths.
+
+<index>
+    The region number (region size was specified in constructor parameters).
+    If index is omitted, the next region (previous index + 1) is used.
+    Expressed in hexadecimal (WITHOUT any prefix like 0x).
+
+<path_nr>
+    The path number in the range 0 ... (<num_paths> - 1).
+    Expressed in hexadecimal (WITHOUT any prefix like 0x).
+
+Status
+======
+
+No status line is reported.
+
+Example
+=======
+
+Assume that you have volumes vg1/switch0 vg1/switch1 vg1/switch2 with
+the same size.
+
+Create a switch device with 64kB region size:
+    dmsetup create switch --table "0 `blockdev --getsize /dev/vg1/switch0`
+	switch 3 128 0 /dev/vg1/switch0 0 /dev/vg1/switch1 0 /dev/vg1/switch2 0"
+
+Set mappings for the first 7 entries to point to devices switch0, switch1,
+switch2, switch0, switch1, switch2, switch1:
+    dmsetup message switch 0 set_region_mappings 0:0 :1 :2 :0 :1 :2 :1

MAINTAINERS

@@ -2574,6 +2574,7 @@ S:	Maintained
 
 DEVICE-MAPPER  (LVM)
 M:	Alasdair Kergon <agk@redhat.com>
+M:	Mike Snitzer <snitzer@redhat.com>
 M:	dm-devel@redhat.com
 L:	dm-devel@redhat.com
 W:	http://sources.redhat.com/dm
@@ -2585,6 +2586,7 @@ F:	drivers/md/dm*
 F:	drivers/md/persistent-data/
 F:	include/linux/device-mapper.h
 F:	include/linux/dm-*.h
+F:	include/uapi/linux/dm-*.h
 
 DIOLAN U2C-12 I2C DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>

drivers/md/Kconfig

@@ -412,4 +412,18 @@ config DM_VERITY
 
 	  If unsure, say N.
 
+config DM_SWITCH
+	tristate "Switch target support (EXPERIMENTAL)"
+	depends on BLK_DEV_DM
+	---help---
+	  This device-mapper target creates a device that supports an arbitrary
+	  mapping of fixed-size regions of I/O across a fixed set of paths.
+	  The path used for any specific region can be switched dynamically
+	  by sending the target a message.
+
+	  To compile this code as a module, choose M here: the module will
+	  be called dm-switch.
+
+	  If unsure, say N.
+
 endif # MD

drivers/md/Makefile

@@ -40,6 +40,7 @@ obj-$(CONFIG_DM_FLAKEY)		+= dm-flakey.o
 obj-$(CONFIG_DM_MULTIPATH)	+= dm-multipath.o dm-round-robin.o
 obj-$(CONFIG_DM_MULTIPATH_QL)	+= dm-queue-length.o
 obj-$(CONFIG_DM_MULTIPATH_ST)	+= dm-service-time.o
+obj-$(CONFIG_DM_SWITCH)		+= dm-switch.o
 obj-$(CONFIG_DM_SNAPSHOT)	+= dm-snapshot.o
 obj-$(CONFIG_DM_PERSISTENT_DATA)	+= persistent-data/
 obj-$(CONFIG_DM_MIRROR)		+= dm-mirror.o dm-log.o dm-region-hash.o

drivers/md/dm-bufio.c

@@ -145,6 +145,7 @@ struct dm_buffer {
 	unsigned long state;
 	unsigned long last_accessed;
 	struct dm_bufio_client *c;
+	struct list_head write_list;
 	struct bio bio;
 	struct bio_vec bio_vec[DM_BUFIO_INLINE_VECS];
 };
@@ -349,7 +350,7 @@ static void *alloc_buffer_data(struct dm_bufio_client *c, gfp_t gfp_mask,
 	if (gfp_mask & __GFP_NORETRY)
 		noio_flag = memalloc_noio_save();
 
-	ptr = __vmalloc(c->block_size, gfp_mask, PAGE_KERNEL);
+	ptr = __vmalloc(c->block_size, gfp_mask | __GFP_HIGHMEM, PAGE_KERNEL);
 
 	if (gfp_mask & __GFP_NORETRY)
 		memalloc_noio_restore(noio_flag);
@@ -630,7 +631,8 @@ static int do_io_schedule(void *word)
  * - Submit our write and don't wait on it. We set B_WRITING indicating
  *   that there is a write in progress.
  */
-static void __write_dirty_buffer(struct dm_buffer *b)
+static void __write_dirty_buffer(struct dm_buffer *b,
+				 struct list_head *write_list)
 {
 	if (!test_bit(B_DIRTY, &b->state))
 		return;
@@ -639,7 +641,24 @@ static void __write_dirty_buffer(struct dm_buffer *b)
 	wait_on_bit_lock(&b->state, B_WRITING,
 			 do_io_schedule, TASK_UNINTERRUPTIBLE);
 
-	submit_io(b, WRITE, b->block, write_endio);
+	if (!write_list)
+		submit_io(b, WRITE, b->block, write_endio);
+	else
+		list_add_tail(&b->write_list, write_list);
+}
+
+static void __flush_write_list(struct list_head *write_list)
+{
+	struct blk_plug plug;
+	blk_start_plug(&plug);
+	while (!list_empty(write_list)) {
+		struct dm_buffer *b =
+			list_entry(write_list->next, struct dm_buffer, write_list);
+		list_del(&b->write_list);
+		submit_io(b, WRITE, b->block, write_endio);
+		dm_bufio_cond_resched();
+	}
+	blk_finish_plug(&plug);
 }
 
 /*
@@ -655,7 +674,7 @@ static void __make_buffer_clean(struct dm_buffer *b)
 		return;
 
 	wait_on_bit(&b->state, B_READING, do_io_schedule, TASK_UNINTERRUPTIBLE);
-	__write_dirty_buffer(b);
+	__write_dirty_buffer(b, NULL);
 	wait_on_bit(&b->state, B_WRITING, do_io_schedule, TASK_UNINTERRUPTIBLE);
 }
 
@@ -802,7 +821,8 @@ static void __free_buffer_wake(struct dm_buffer *b)
 	wake_up(&c->free_buffer_wait);
 }
 
-static void __write_dirty_buffers_async(struct dm_bufio_client *c, int no_wait)
+static void __write_dirty_buffers_async(struct dm_bufio_client *c, int no_wait,
+					struct list_head *write_list)
 {
 	struct dm_buffer *b, *tmp;
 
@@ -818,7 +838,7 @@ static void __write_dirty_buffers_async(struct dm_bufio_client *c, int no_wait)
 		if (no_wait && test_bit(B_WRITING, &b->state))
 			return;
 
-		__write_dirty_buffer(b);
+		__write_dirty_buffer(b, write_list);
 		dm_bufio_cond_resched();
 	}
 }
@@ -853,7 +873,8 @@ static void __get_memory_limit(struct dm_bufio_client *c,
  * If we are over threshold_buffers, start freeing buffers.
  * If we're over "limit_buffers", block until we get under the limit.
  */
-static void __check_watermark(struct dm_bufio_client *c)
+static void __check_watermark(struct dm_bufio_client *c,
+			      struct list_head *write_list)
 {
 	unsigned long threshold_buffers, limit_buffers;
 
@@ -872,7 +893,7 @@ static void __check_watermark(struct dm_bufio_client *c)
 	}
 
 	if (c->n_buffers[LIST_DIRTY] > threshold_buffers)
-		__write_dirty_buffers_async(c, 1);
+		__write_dirty_buffers_async(c, 1, write_list);
 }
 
 /*
@@ -897,7 +918,8 @@ static struct dm_buffer *__find(struct dm_bufio_client *c, sector_t block)
  *--------------------------------------------------------------*/
 
 static struct dm_buffer *__bufio_new(struct dm_bufio_client *c, sector_t block,
-				     enum new_flag nf, int *need_submit)
+				     enum new_flag nf, int *need_submit,
+				     struct list_head *write_list)
 {
 	struct dm_buffer *b, *new_b = NULL;
 
@@ -924,7 +946,7 @@ static struct dm_buffer *__bufio_new(struct dm_bufio_client *c, sector_t block,
 		goto found_buffer;
 	}
 
-	__check_watermark(c);
+	__check_watermark(c, write_list);
 
 	b = new_b;
 	b->hold_count = 1;
@@ -992,10 +1014,14 @@ static void *new_read(struct dm_bufio_client *c, sector_t block,
 	int need_submit;
 	struct dm_buffer *b;
 
+	LIST_HEAD(write_list);
+
 	dm_bufio_lock(c);
-	b = __bufio_new(c, block, nf, &need_submit);
+	b = __bufio_new(c, block, nf, &need_submit, &write_list);
 	dm_bufio_unlock(c);
 
+	__flush_write_list(&write_list);
+
 	if (!b)
 		return b;
 
@@ -1047,6 +1073,8 @@ void dm_bufio_prefetch(struct dm_bufio_client *c,
 {
 	struct blk_plug plug;
 
+	LIST_HEAD(write_list);
+
 	BUG_ON(dm_bufio_in_request());
 
 	blk_start_plug(&plug);
@@ -1055,7 +1083,15 @@ void dm_bufio_prefetch(struct dm_bufio_client *c,
 	for (; n_blocks--; block++) {
 		int need_submit;
 		struct dm_buffer *b;
-		b = __bufio_new(c, block, NF_PREFETCH, &need_submit);
+		b = __bufio_new(c, block, NF_PREFETCH, &need_submit,
+				&write_list);
+		if (unlikely(!list_empty(&write_list))) {
+			dm_bufio_unlock(c);
+			blk_finish_plug(&plug);
+			__flush_write_list(&write_list);
+			blk_start_plug(&plug);
+			dm_bufio_lock(c);
+		}
 		if (unlikely(b != NULL)) {
 			dm_bufio_unlock(c);
 
@@ -1069,7 +1105,6 @@ void dm_bufio_prefetch(struct dm_bufio_client *c,
 				goto flush_plug;
 			dm_bufio_lock(c);
 		}
-
 	}
 
 	dm_bufio_unlock(c);
@@ -1126,11 +1161,14 @@ EXPORT_SYMBOL_GPL(dm_bufio_mark_buffer_dirty);
 
 void dm_bufio_write_dirty_buffers_async(struct dm_bufio_client *c)
 {
+	LIST_HEAD(write_list);
+
 	BUG_ON(dm_bufio_in_request());
 
 	dm_bufio_lock(c);
-	__write_dirty_buffers_async(c, 0);
+	__write_dirty_buffers_async(c, 0, &write_list);
 	dm_bufio_unlock(c);
+	__flush_write_list(&write_list);
 }
 EXPORT_SYMBOL_GPL(dm_bufio_write_dirty_buffers_async);
 
@@ -1147,8 +1185,13 @@ int dm_bufio_write_dirty_buffers(struct dm_bufio_client *c)
 	unsigned long buffers_processed = 0;
 	struct dm_buffer *b, *tmp;
 
+	LIST_HEAD(write_list);
+
+	dm_bufio_lock(c);
+	__write_dirty_buffers_async(c, 0, &write_list);
+	dm_bufio_unlock(c);
+	__flush_write_list(&write_list);
 	dm_bufio_lock(c);
-	__write_dirty_buffers_async(c, 0);
 
 again:
 	list_for_each_entry_safe_reverse(b, tmp, &c->lru[LIST_DIRTY], lru_list) {
@@ -1274,7 +1317,7 @@ void dm_bufio_release_move(struct dm_buffer *b, sector_t new_block)
 	BUG_ON(!b->hold_count);
 	BUG_ON(test_bit(B_READING, &b->state));
 
-	__write_dirty_buffer(b);
+	__write_dirty_buffer(b, NULL);
 	if (b->hold_count == 1) {
 		wait_on_bit(&b->state, B_WRITING,
 			    do_io_schedule, TASK_UNINTERRUPTIBLE);

drivers/md/dm-cache-target.c

@@ -425,6 +425,10 @@ static bool block_size_is_power_of_two(struct cache *cache)
 	return cache->sectors_per_block_shift >= 0;
 }
 
+/* gcc on ARM generates spurious references to __udivdi3 and __umoddi3 */
+#if defined(CONFIG_ARM) && __GNUC__ == 4 && __GNUC_MINOR__ <= 6
+__always_inline
+#endif
 static dm_block_t block_div(dm_block_t b, uint32_t n)
 {
 	do_div(b, n);

drivers/md/dm-flakey.c

@@ -176,7 +176,7 @@ static int flakey_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 
 	fc = kzalloc(sizeof(*fc), GFP_KERNEL);
 	if (!fc) {
-		ti->error = "Cannot allocate linear context";
+		ti->error = "Cannot allocate context";
 		return -ENOMEM;
 	}
 	fc->start_time = jiffies;

drivers/md/dm-mpath.c

@@ -1561,7 +1561,6 @@ static int multipath_ioctl(struct dm_target *ti, unsigned int cmd,
 	unsigned long flags;
 	int r;
 
-again:
 	bdev = NULL;
 	mode = 0;
 	r = 0;
@@ -1579,7 +1578,7 @@ static int multipath_ioctl(struct dm_target *ti, unsigned int cmd,
 	}
 
 	if ((pgpath && m->queue_io) || (!pgpath && m->queue_if_no_path))
-		r = -EAGAIN;
+		r = -ENOTCONN;
 	else if (!bdev)
 		r = -EIO;
 
@@ -1591,11 +1590,8 @@ static int multipath_ioctl(struct dm_target *ti, unsigned int cmd,
 	if (!r && ti->len != i_size_read(bdev->bd_inode) >> SECTOR_SHIFT)
 		r = scsi_verify_blk_ioctl(NULL, cmd);
 
-	if (r == -EAGAIN && !fatal_signal_pending(current)) {
+	if (r == -ENOTCONN && !fatal_signal_pending(current))
 		queue_work(kmultipathd, &m->process_queued_ios);
-		msleep(10);
-		goto again;
-	}
 
 	return r ? : __blkdev_driver_ioctl(bdev, mode, cmd, arg);
 }

drivers/md/dm-table.c

@@ -26,22 +26,8 @@
 #define KEYS_PER_NODE (NODE_SIZE / sizeof(sector_t))
 #define CHILDREN_PER_NODE (KEYS_PER_NODE + 1)
 
-/*
- * The table has always exactly one reference from either mapped_device->map
- * or hash_cell->new_map. This reference is not counted in table->holders.
- * A pair of dm_create_table/dm_destroy_table functions is used for table
- * creation/destruction.
- *
- * Temporary references from the other code increase table->holders. A pair
- * of dm_table_get/dm_table_put functions is used to manipulate it.
- *
- * When the table is about to be destroyed, we wait for table->holders to
- * drop to zero.
- */
-
 struct dm_table {
 	struct mapped_device *md;
-	atomic_t holders;
 	unsigned type;
 
 	/* btree table */
@@ -208,7 +194,6 @@ int dm_table_create(struct dm_table **result, fmode_t mode,
 
 	INIT_LIST_HEAD(&t->devices);
 	INIT_LIST_HEAD(&t->target_callbacks);
-	atomic_set(&t->holders, 0);
 
 	if (!num_targets)
 		num_targets = KEYS_PER_NODE;
@@ -246,10 +231,6 @@ void dm_table_destroy(struct dm_table *t)
 	if (!t)
 		return;
 
-	while (atomic_read(&t->holders))
-		msleep(1);
-	smp_mb();
-
 	/* free the indexes */
 	if (t->depth >= 2)
 		vfree(t->index[t->depth - 2]);
@@ -274,22 +255,6 @@ void dm_table_destroy(struct dm_table *t)
 	kfree(t);
 }
 
-void dm_table_get(struct dm_table *t)
-{
-	atomic_inc(&t->holders);
-}
-EXPORT_SYMBOL(dm_table_get);
-
-void dm_table_put(struct dm_table *t)
-{
-	if (!t)
-		return;
-
-	smp_mb__before_atomic_dec();
-	atomic_dec(&t->holders);
-}
-EXPORT_SYMBOL(dm_table_put);
-
 /*
  * Checks to see if we need to extend highs or targets.
  */

drivers/md/dm-verity.c

@@ -451,7 +451,7 @@ static void verity_prefetch_io(struct work_struct *work)
 				goto no_prefetch_cluster;
 
 			if (unlikely(cluster & (cluster - 1)))
-				cluster = 1 << (fls(cluster) - 1);
+				cluster = 1 << __fls(cluster);
 
 			hash_block_start &= ~(sector_t)(cluster - 1);
 			hash_block_end |= cluster - 1;
@@ -695,8 +695,8 @@ static int verity_ctr(struct dm_target *ti, unsigned argc, char **argv)
 		goto bad;
 	}
 
-	if (sscanf(argv[0], "%d%c", &num, &dummy) != 1 ||
-	    num < 0 || num > 1) {
+	if (sscanf(argv[0], "%u%c", &num, &dummy) != 1 ||
+	    num > 1) {
 		ti->error = "Invalid version";
 		r = -EINVAL;
 		goto bad;
@@ -723,7 +723,7 @@ static int verity_ctr(struct dm_target *ti, unsigned argc, char **argv)
 		r = -EINVAL;
 		goto bad;
 	}
-	v->data_dev_block_bits = ffs(num) - 1;
+	v->data_dev_block_bits = __ffs(num);
 
 	if (sscanf(argv[4], "%u%c", &num, &dummy) != 1 ||
 	    !num || (num & (num - 1)) ||
@@ -733,7 +733,7 @@ static int verity_ctr(struct dm_target *ti, unsigned argc, char **argv)
 		r = -EINVAL;
 		goto bad;
 	}
-	v->hash_dev_block_bits = ffs(num) - 1;
+	v->hash_dev_block_bits = __ffs(num);
 
 	if (sscanf(argv[5], "%llu%c", &num_ll, &dummy) != 1 ||
 	    (sector_t)(num_ll << (v->data_dev_block_bits - SECTOR_SHIFT))
@@ -812,7 +812,7 @@ static int verity_ctr(struct dm_target *ti, unsigned argc, char **argv)
 	}
 
 	v->hash_per_block_bits =
-		fls((1 << v->hash_dev_block_bits) / v->digest_size) - 1;
+		__fls((1 << v->hash_dev_block_bits) / v->digest_size);
 
 	v->levels = 0;
 	if (v->data_blocks)
@@ -831,9 +831,8 @@ static int verity_ctr(struct dm_target *ti, unsigned argc, char **argv)
 	for (i = v->levels - 1; i >= 0; i--) {
 		sector_t s;
 		v->hash_level_block[i] = hash_position;
-		s = verity_position_at_level(v, v->data_blocks, i);
-		s = (s >> v->hash_per_block_bits) +
-		    !!(s & ((1 << v->hash_per_block_bits) - 1));
+		s = (v->data_blocks + ((sector_t)1 << ((i + 1) * v->hash_per_block_bits)) - 1)
+					>> ((i + 1) * v->hash_per_block_bits);
 		if (hash_position + s < hash_position) {
 			ti->error = "Hash device offset overflow";
 			r = -E2BIG;

include/linux/device-mapper.h

@@ -446,9 +446,9 @@ int __must_check dm_set_target_max_io_len(struct dm_target *ti, sector_t len);
 /*
  * Table reference counting.
  */
-struct dm_table *dm_get_live_table(struct mapped_device *md);
-void dm_table_get(struct dm_table *t);
-void dm_table_put(struct dm_table *t);
+struct dm_table *dm_get_live_table(struct mapped_device *md, int *srcu_idx);
+void dm_put_live_table(struct mapped_device *md, int srcu_idx);
+void dm_sync_table(struct mapped_device *md);
 
 /*
  * Queries

include/uapi/linux/dm-ioctl.h

@@ -267,9 +267,9 @@ enum {
 #define DM_DEV_SET_GEOMETRY	_IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
 
 #define DM_VERSION_MAJOR	4
-#define DM_VERSION_MINOR	24
+#define DM_VERSION_MINOR	25
 #define DM_VERSION_PATCHLEVEL	0
-#define DM_VERSION_EXTRA	"-ioctl (2013-01-15)"
+#define DM_VERSION_EXTRA	"-ioctl (2013-06-26)"
 
 /* Status bits */
 #define DM_READONLY_FLAG	(1 << 0) /* In/Out */