Commit 9aaeded7 authored by Adrian Bunk's avatar Adrian Bunk

typo fixes: bandwith -> bandwidth

Signed-off-by: default avatarAdrian Bunk <bunk@stusta.de>
parent 27ae4104
/*
* Memory arbiter functions. Allocates bandwith through the
* Memory arbiter functions. Allocates bandwidth through the
* arbiter and sets up arbiter breakpoints.
*
* The algorithm first assigns slots to the clients that has specified
* bandwith (e.g. ethernet) and then the remaining slots are divided
* bandwidth (e.g. ethernet) and then the remaining slots are divided
* on all the active clients.
*
* Copyright (c) 2004, 2005 Axis Communications AB.
......@@ -133,8 +133,8 @@ static void crisv32_arbiter_init(void)
int crisv32_arbiter_allocate_bandwith(int client, int region,
unsigned long bandwidth)
int crisv32_arbiter_allocate_bandwidth(int client, int region,
unsigned long bandwidth)
{
int i;
int total_assigned = 0;
......
......@@ -25,8 +25,8 @@ int crisv32_request_dma(unsigned int dmanr, const char * device_id,
reg_config_rw_clk_ctrl clk_ctrl;
reg_strmux_rw_cfg strmux_cfg;
if (crisv32_arbiter_allocate_bandwith(dmanr,
options & DMA_INT_MEM ? INT_REGION : EXT_REGION,
if (crisv32_arbiter_allocate_bandwidth(dmanr,
options & DMA_INT_MEM ? INT_REGION : EXT_REGION,
bandwidth))
return -ENOMEM;
......
......@@ -158,7 +158,7 @@ static int calculate_h_scale_registers(struct saa7146_dev *dev,
}
/* the horizontal scaling increment controls the UV filter
to reduce the bandwith to improve the display quality,
to reduce the bandwidth to improve the display quality,
so set it ... */
if ( xsci == 0x400)
pfuv = 0x00;
......
......@@ -216,7 +216,7 @@ static int lgdt330x_init(struct dvb_frontend* fe)
AGC_DELAY0, 0x07,
AGC_DELAY2, 0xfe,
/* Change the value of IAGCBW[15:8]
of inner AGC loop filter bandwith */
of inner AGC loop filter bandwidth */
AGC_LOOP_BANDWIDTH0, 0x08,
AGC_LOOP_BANDWIDTH1, 0x9a
};
......
......@@ -43,7 +43,7 @@
is a bit braindead (no matching channel masks or no matching filter mask),
we won't support this - yet. it doesn't event support negative filters,
so the best way is maybe to keep TTUSB_HWSECTIONS undef'd and just
parse TS data. USB bandwith will be a problem when having large
parse TS data. USB bandwidth will be a problem when having large
datastreams, especially for dvb-net, but hey, that's not my problem.
TTUSB_DISEQC, TTUSB_TONE:
......
......@@ -13,7 +13,7 @@
******************************************************************************/
/*
* Synchronous Bandwith Allocation (SBA) structs
* Synchronous Bandwidth Allocation (SBA) structs
*/
#ifndef _SBA_
......
......@@ -8043,8 +8043,8 @@ SiS_SetCHTVReg(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
SiS_SetCH700x(SiS_Pr,0x01,0x28);
/* Set video bandwidth
High bandwith Luma composite video filter(S0=1)
low bandwith Luma S-video filter (S2-1=00)
High bandwidth Luma composite video filter(S0=1)
low bandwidth Luma S-video filter (S2-1=00)
disable peak filter in S-video channel (S3=0)
high bandwidth Chroma Filter (S5-4=11)
=00110001=0x31
......
......@@ -20,8 +20,8 @@ enum
arbiter_all_accesses = 0xff
};
int crisv32_arbiter_allocate_bandwith(int client, int region,
unsigned long bandwidth);
int crisv32_arbiter_allocate_bandwidth(int client, int region,
unsigned long bandwidth);
int crisv32_arbiter_watch(unsigned long start, unsigned long size,
unsigned long clients, unsigned long accesses,
watch_callback* cb);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment