[NET] 802: Fix whitespace errors.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/802/fc.c

 /*
  * NET3:	Fibre Channel device handling subroutines
- * 
+ *
  *		This program is free software; you can redistribute it and/or
  *		modify it under the terms of the GNU General Public License
  *		as published by the Free Software Foundation; either version
@@ -31,18 +31,18 @@
 #include <net/arp.h>
 
 /*
- *	Put the headers on a Fibre Channel packet. 
+ *	Put the headers on a Fibre Channel packet.
  */
- 
+
 static int fc_header(struct sk_buff *skb, struct net_device *dev,
 		     unsigned short type,
-		     void *daddr, void *saddr, unsigned len) 
+		     void *daddr, void *saddr, unsigned len)
 {
 	struct fch_hdr *fch;
 	int hdr_len;
 
-	/* 
-	 * Add the 802.2 SNAP header if IP as the IPv4 code calls  
+	/*
+	 * Add the 802.2 SNAP header if IP as the IPv4 code calls
 	 * dev->hard_header directly.
 	 */
 	if (type == ETH_P_IP || type == ETH_P_ARP)
@@ -60,7 +60,7 @@ static int fc_header(struct sk_buff *skb, struct net_device *dev,
 	else
 	{
 		hdr_len = sizeof(struct fch_hdr);
-		fch = (struct fch_hdr *)skb_push(skb, hdr_len);	
+		fch = (struct fch_hdr *)skb_push(skb, hdr_len);
 	}
 
 	if(saddr)
@@ -68,20 +68,20 @@ static int fc_header(struct sk_buff *skb, struct net_device *dev,
 	else
 		memcpy(fch->saddr,dev->dev_addr,dev->addr_len);
 
-	if(daddr) 
+	if(daddr)
 	{
 		memcpy(fch->daddr,daddr,dev->addr_len);
 		return(hdr_len);
 	}
 	return -hdr_len;
 }
-	
+
 /*
  *	A neighbour discovery of some species (eg arp) has completed. We
  *	can now send the packet.
  */
- 
-static int fc_rebuild_header(struct sk_buff *skb) 
+
+static int fc_rebuild_header(struct sk_buff *skb)
 {
 	struct fch_hdr *fch=(struct fch_hdr *)skb->data;
 	struct fcllc *fcllc=(struct fcllc *)(skb->data+sizeof(struct fch_hdr));
@@ -100,7 +100,7 @@ static void fc_setup(struct net_device *dev)
 {
 	dev->hard_header	= fc_header;
 	dev->rebuild_header	= fc_rebuild_header;
-                
+
 	dev->type		= ARPHRD_IEEE802;
 	dev->hard_header_len	= FC_HLEN;
 	dev->mtu		= 2024;

net/802/fddi.c

@@ -15,7 +15,7 @@
  *			Mark Evans, <evansmp@uhura.aston.ac.uk>
  *			Florian La Roche, <rzsfl@rz.uni-sb.de>
  *			Alan Cox, <gw4pts@gw4pts.ampr.org>
- * 
+ *
  *		This program is free software; you can redistribute it and/or
  *		modify it under the terms of the GNU General Public License
  *		as published by the Free Software Foundation; either version
@@ -25,7 +25,7 @@
  *		Alan Cox		:	New arp/rebuild header
  *		Maciej W. Rozycki	:	IPv6 support
  */
- 
+
 #include <linux/module.h>
 #include <asm/system.h>
 #include <linux/types.h>
@@ -57,7 +57,7 @@ static int fddi_header(struct sk_buff *skb, struct net_device *dev,
 {
 	int hl = FDDI_K_SNAP_HLEN;
 	struct fddihdr *fddi;
-	
+
 	if(type != ETH_P_IP && type != ETH_P_IPV6 && type != ETH_P_ARP)
 		hl=FDDI_K_8022_HLEN-3;
 	fddi = (struct fddihdr *)skb_push(skb, hl);
@@ -74,7 +74,7 @@ static int fddi_header(struct sk_buff *skb, struct net_device *dev,
 	}
 
 	/* Set the source and destination hardware addresses */
-	 
+
 	if (saddr != NULL)
 		memcpy(fddi->saddr, saddr, dev->addr_len);
 	else
@@ -95,7 +95,7 @@ static int fddi_header(struct sk_buff *skb, struct net_device *dev,
  * (or in future other address resolution) has completed on
  * this sk_buff.  We now let ARP fill in the other fields.
  */
- 
+
 static int fddi_rebuild_header(struct sk_buff	*skb)
 {
 	struct fddihdr *fddi = (struct fddihdr *)skb->data;
@@ -105,7 +105,7 @@ static int fddi_rebuild_header(struct sk_buff	*skb)
 		/* Try to get ARP to resolve the header and fill destination address */
 		return arp_find(fddi->daddr, skb);
 	else
-#endif	
+#endif
 	{
 		printk("%s: Don't know how to resolve type %04X addresses.\n",
 		       skb->dev->name, ntohs(fddi->hdr.llc_snap.ethertype));
@@ -120,19 +120,19 @@ static int fddi_rebuild_header(struct sk_buff	*skb)
  * up.  It's used to fill in specific skb fields and to set
  * the proper pointer to the start of packet data (skb->data).
  */
- 
+
 __be16 fddi_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	struct fddihdr *fddi = (struct fddihdr *)skb->data;
 	__be16 type;
-	
+
 	/*
 	 * Set mac.raw field to point to FC byte, set data field to point
 	 * to start of packet data.  Assume 802.2 SNAP frames for now.
 	 */
 
 	skb->mac.raw = skb->data;	/* point to frame control (FC) */
-	
+
 	if(fddi->hdr.llc_8022_1.dsap==0xe0)
 	{
 		skb_pull(skb, FDDI_K_8022_HLEN-3);
@@ -143,9 +143,9 @@ __be16 fddi_type_trans(struct sk_buff *skb, struct net_device *dev)
 		skb_pull(skb, FDDI_K_SNAP_HLEN);		/* adjust for 21 byte header */
 		type=fddi->hdr.llc_snap.ethertype;
 	}
-	
+
 	/* Set packet type based on destination address and flag settings */
-			
+
 	if (*fddi->daddr & 0x01)
 	{
 		if (memcmp(fddi->daddr, dev->broadcast, FDDI_K_ALEN) == 0)
@@ -153,7 +153,7 @@ __be16 fddi_type_trans(struct sk_buff *skb, struct net_device *dev)
 		else
 			skb->pkt_type = PACKET_MULTICAST;
 	}
-	
+
 	else if (dev->flags & IFF_PROMISC)
 	{
 		if (memcmp(fddi->daddr, dev->dev_addr, FDDI_K_ALEN))
@@ -187,7 +187,7 @@ static void fddi_setup(struct net_device *dev)
 	dev->addr_len		= FDDI_K_ALEN;
 	dev->tx_queue_len	= 100;			/* Long queues on FDDI */
 	dev->flags		= IFF_BROADCAST | IFF_MULTICAST;
-	
+
 	memset(dev->broadcast, 0xFF, FDDI_K_ALEN);
 }
 

net/802/hippi.c

@@ -39,7 +39,7 @@
 #include <asm/system.h>
 
 /*
- * Create the HIPPI MAC header for an arbitrary protocol layer 
+ * Create the HIPPI MAC header for an arbitrary protocol layer
  *
  * saddr=NULL	means use device source address
  * daddr=NULL	means leave destination address (eg unresolved arp)
@@ -104,8 +104,8 @@ static int hippi_rebuild_header(struct sk_buff *skb)
 	/*
 	 * Only IP is currently supported
 	 */
-	 
-	if(hip->snap.ethertype != __constant_htons(ETH_P_IP)) 
+
+	if(hip->snap.ethertype != __constant_htons(ETH_P_IP))
 	{
 		printk(KERN_DEBUG "%s: unable to resolve type %X addresses.\n",skb->dev->name,ntohs(hip->snap.ethertype));
 		return 0;
@@ -122,11 +122,11 @@ static int hippi_rebuild_header(struct sk_buff *skb)
 /*
  *	Determine the packet's protocol ID.
  */
- 
+
 __be16 hippi_type_trans(struct sk_buff *skb, struct net_device *dev)
 {
 	struct hippi_hdr *hip;
-	
+
 	hip = (struct hippi_hdr *) skb->data;
 
 	/*
@@ -173,10 +173,10 @@ static int hippi_neigh_setup_dev(struct net_device *dev, struct neigh_parms *p)
 {
 	/* Never send broadcast/multicast ARP messages */
 	p->mcast_probes = 0;
- 
+
 	/* In IPv6 unicast probes are valid even on NBMA,
 	* because they are encapsulated in normal IPv6 protocol.
-	* Should be a generic flag. 
+	* Should be a generic flag.
 	*/
 	if (p->tbl->family != AF_INET6)
 		p->ucast_probes = 0;
@@ -193,7 +193,7 @@ static void hippi_setup(struct net_device *dev)
 	dev->hard_header_parse		= NULL;
 	dev->hard_header_cache		= NULL;
 	dev->header_cache_update	= NULL;
-	dev->neigh_setup 		= hippi_neigh_setup_dev; 
+	dev->neigh_setup 		= hippi_neigh_setup_dev;
 
 	/*
 	 * We don't support HIPPI `ARP' for the time being, and probably
@@ -210,9 +210,9 @@ static void hippi_setup(struct net_device *dev)
 
 	/*
 	 * HIPPI doesn't support broadcast+multicast and we only use
-	 * static ARP tables. ARP is disabled by hippi_neigh_setup_dev. 
+	 * static ARP tables. ARP is disabled by hippi_neigh_setup_dev.
 	 */
-	dev->flags = 0; 
+	dev->flags = 0;
 }
 
 /**

net/802/psnap.c

@@ -117,7 +117,7 @@ module_exit(snap_exit);
  */
 struct datalink_proto *register_snap_client(unsigned char *desc,
 					    int (*rcvfunc)(struct sk_buff *,
-						    	   struct net_device *,
+							   struct net_device *,
 							   struct packet_type *,
 							   struct net_device *))
 {