ARM: dts: dra7x-evm: Don't use dcan1_rx.gpio1_15 in DCAN pinctrl

Rev.F onwards ball G19 (dcan1_rx) is used as a GPIO for some other
function so don't include it in DCAN pinctrl node.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/dra7-evm.dts

@@ -264,7 +264,6 @@ davinci_mdio_sleep: davinci_mdio_sleep {
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
 			0x3d0   (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
-			0x3d4   (MUX_MODE15)		/* dcan1_rx.off */
 			0x418   (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
 		>;
 	};
@@ -272,7 +271,6 @@ dcan1_pins_default: dcan1_pins_default {
 	dcan1_pins_sleep: dcan1_pins_sleep {
 		pinctrl-single,pins = <
 			0x3d0   (MUX_MODE15)	/* dcan1_tx.off */
-			0x3d4   (MUX_MODE15)	/* dcan1_rx.off */
 			0x418   (MUX_MODE15)	/* wakeup0.off */
 		>;
 	};

arch/arm/boot/dts/dra72-evm.dts

@@ -120,7 +120,6 @@ mmc2_pins_default: mmc2_pins_default {
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
 			0x3d0   (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
-			0x3d4   (MUX_MODE15)		/* dcan1_rx.off */
 			0x418   (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
 		>;
 	};
@@ -128,7 +127,6 @@ dcan1_pins_default: dcan1_pins_default {
 	dcan1_pins_sleep: dcan1_pins_sleep {
 		pinctrl-single,pins = <
 			0x3d0   (MUX_MODE15)	/* dcan1_tx.off */
-			0x3d4   (MUX_MODE15)	/* dcan1_rx.off */
 			0x418   (MUX_MODE15)	/* wakeup0.off */
 		>;
 	};