Commit 9b7a0ddc authored by Arend van Spriel's avatar Arend van Spriel Committed by Kalle Valo

brcmfmac: pass DEAUTH/DISASSOC reason code to user-space

The driver always called cfg80211_disconnected() with reason parameter
set to zero, ie. unknown. However, firmware does provide a valid
802.11 reason code in DEAUTH and DISASSOC event message to the driver.
This patch passes the reason code to cfg80211_disconnected().
Reviewed-by: default avatarDaniel (Deognyoun) Kim <dekim@broadcom.com>
Reviewed-by: default avatarHante Meuleman <meuleman@broadcom.com>
Reviewed-by: default avatarPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: default avatarArend van Spriel <arend@broadcom.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 4dd8b26a
...@@ -1229,7 +1229,25 @@ static void brcmf_init_prof(struct brcmf_cfg80211_profile *prof) ...@@ -1229,7 +1229,25 @@ static void brcmf_init_prof(struct brcmf_cfg80211_profile *prof)
memset(prof, 0, sizeof(*prof)); memset(prof, 0, sizeof(*prof));
} }
static void brcmf_link_down(struct brcmf_cfg80211_vif *vif) static u16 brcmf_map_fw_linkdown_reason(const struct brcmf_event_msg *e)
{
u16 reason;
switch (e->event_code) {
case BRCMF_E_DEAUTH:
case BRCMF_E_DEAUTH_IND:
case BRCMF_E_DISASSOC_IND:
reason = e->reason;
break;
case BRCMF_E_LINK:
default:
reason = 0;
break;
}
return reason;
}
static void brcmf_link_down(struct brcmf_cfg80211_vif *vif, u16 reason)
{ {
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(vif->wdev.wiphy); struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(vif->wdev.wiphy);
s32 err = 0; s32 err = 0;
...@@ -1244,7 +1262,8 @@ static void brcmf_link_down(struct brcmf_cfg80211_vif *vif) ...@@ -1244,7 +1262,8 @@ static void brcmf_link_down(struct brcmf_cfg80211_vif *vif)
brcmf_err("WLC_DISASSOC failed (%d)\n", err); brcmf_err("WLC_DISASSOC failed (%d)\n", err);
} }
clear_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state); clear_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state);
cfg80211_disconnected(vif->wdev.netdev, 0, NULL, 0, GFP_KERNEL); cfg80211_disconnected(vif->wdev.netdev, reason, NULL, 0,
GFP_KERNEL);
} }
clear_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state); clear_bit(BRCMF_VIF_STATUS_CONNECTING, &vif->sme_state);
...@@ -1414,7 +1433,7 @@ brcmf_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *ndev) ...@@ -1414,7 +1433,7 @@ brcmf_cfg80211_leave_ibss(struct wiphy *wiphy, struct net_device *ndev)
if (!check_vif_up(ifp->vif)) if (!check_vif_up(ifp->vif))
return -EIO; return -EIO;
brcmf_link_down(ifp->vif); brcmf_link_down(ifp->vif, WLAN_REASON_DEAUTH_LEAVING);
brcmf_dbg(TRACE, "Exit\n"); brcmf_dbg(TRACE, "Exit\n");
...@@ -3041,7 +3060,7 @@ static s32 brcmf_cfg80211_suspend(struct wiphy *wiphy, ...@@ -3041,7 +3060,7 @@ static s32 brcmf_cfg80211_suspend(struct wiphy *wiphy,
* disassociate from AP to save power while system is * disassociate from AP to save power while system is
* in suspended state * in suspended state
*/ */
brcmf_link_down(vif); brcmf_link_down(vif, WLAN_REASON_UNSPECIFIED);
/* Make sure WPA_Supplicant receives all the event /* Make sure WPA_Supplicant receives all the event
* generated due to DISASSOC call to the fw to keep * generated due to DISASSOC call to the fw to keep
* the state fw and WPA_Supplicant state consistent * the state fw and WPA_Supplicant state consistent
...@@ -4927,7 +4946,7 @@ brcmf_notify_connect_status(struct brcmf_if *ifp, ...@@ -4927,7 +4946,7 @@ brcmf_notify_connect_status(struct brcmf_if *ifp,
if (!brcmf_is_ibssmode(ifp->vif)) { if (!brcmf_is_ibssmode(ifp->vif)) {
brcmf_bss_connect_done(cfg, ndev, e, false); brcmf_bss_connect_done(cfg, ndev, e, false);
} }
brcmf_link_down(ifp->vif); brcmf_link_down(ifp->vif, brcmf_map_fw_linkdown_reason(e));
brcmf_init_prof(ndev_to_prof(ndev)); brcmf_init_prof(ndev_to_prof(ndev));
if (ndev != cfg_to_ndev(cfg)) if (ndev != cfg_to_ndev(cfg))
complete(&cfg->vif_disabled); complete(&cfg->vif_disabled);
...@@ -5868,7 +5887,7 @@ static s32 __brcmf_cfg80211_down(struct brcmf_if *ifp) ...@@ -5868,7 +5887,7 @@ static s32 __brcmf_cfg80211_down(struct brcmf_if *ifp)
* from AP to save power * from AP to save power
*/ */
if (check_vif_up(ifp->vif)) { if (check_vif_up(ifp->vif)) {
brcmf_link_down(ifp->vif); brcmf_link_down(ifp->vif, WLAN_REASON_UNSPECIFIED);
/* Make sure WPA_Supplicant receives all the event /* Make sure WPA_Supplicant receives all the event
generated due to DISASSOC call to the fw to keep generated due to DISASSOC call to the fw to keep
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment