Merge remote-tracking branch 'jwb/next' into next

arch/powerpc/Kconfig

@@ -345,7 +345,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on (PPC_BOOK3S || FSL_BOOKE) && EXPERIMENTAL
+	depends on (PPC_BOOK3S || FSL_BOOKE || (44x && !SMP && !47x)) && EXPERIMENTAL
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/powerpc/boot/dts/hcu4.dts

-/*
-* Device Tree Source for Netstal Maschinen HCU4
-* based on the IBM Walnut
-*
-* Copyright 2008
-* Niklaus Giger <niklaus.giger@member.fsf.org>
-*
-* Copyright 2007 IBM Corp.
-* Josh Boyer <jwboyer@linux.vnet.ibm.com>
-*
-* This file is licensed under the terms of the GNU General Public
-* License version 2.  This program is licensed "as is" without
-* any warranty of any kind, whether express or implied.
-*/
-
-/dts-v1/;
-
-/ {
-	#address-cells = <0x1>;
-	#size-cells = <0x1>;
-	model = "netstal,hcu4";
-	compatible = "netstal,hcu4";
-	dcr-parent = <0x1>;
-
-	aliases {
-		ethernet0 = "/plb/opb/ethernet@ef600800";
-		serial0 = "/plb/opb/serial@ef600300";
-	};
-
-	cpus {
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			model = "PowerPC,405GPr";
-			reg = <0x0>;
-			clock-frequency = <0>;		/* Filled in by U-Boot */
-			timebase-frequency = <0x0>;	/* Filled in by U-Boot */
-			i-cache-line-size = <0x20>;
-			d-cache-line-size = <0x20>;
-			i-cache-size = <0x4000>;
-			d-cache-size = <0x4000>;
-			dcr-controller;
-			dcr-access-method = "native";
-			linux,phandle = <0x1>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x0>;	/* Filled in by U-Boot */
-	};
-
-	UIC0: interrupt-controller {
-		compatible = "ibm,uic";
-		interrupt-controller;
-		cell-index = <0x0>;
-		dcr-reg = <0xc0 0x9>;
-		#address-cells = <0x0>;
-		#size-cells = <0x0>;
-		#interrupt-cells = <0x2>;
-		linux,phandle = <0x2>;
-	};
-
-	plb {
-		compatible = "ibm,plb3";
-		#address-cells = <0x1>;
-		#size-cells = <0x1>;
-		ranges;
-		clock-frequency = <0x0>;	/* Filled in by U-Boot */
-
-		SDRAM0: memory-controller {
-			compatible = "ibm,sdram-405gp";
-			dcr-reg = <0x10 0x2>;
-		};
-
-		MAL: mcmal {
-			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
-			dcr-reg = <0x180 0x62>;
-			num-tx-chans = <0x1>;
-			num-rx-chans = <0x1>;
-			interrupt-parent = <0x2>;
-			interrupts = <0xb 0x4 0xc 0x4 0xa 0x4 0xd 0x4 0xe 0x4>;
-			linux,phandle = <0x3>;
-		};
-
-		POB0: opb {
-			compatible = "ibm,opb-405gp", "ibm,opb";
-			#address-cells = <0x1>;
-			#size-cells = <0x1>;
-			ranges = <0xef600000 0xef600000 0xa00000>;
-			dcr-reg = <0xa0 0x5>;
-			clock-frequency = <0x0>;	/* Filled in by U-Boot */
-
-			UART0: serial@ef600300 {
-				device_type = "serial";
-				compatible = "ns16550";
-				reg = <0xef600300 0x8>;
-				virtual-reg = <0xef600300>;
-				clock-frequency = <0x0>;/* Filled in by U-Boot */
-				current-speed = <0>;	/* Filled in by U-Boot */
-				interrupt-parent = <0x2>;
-				interrupts = <0x0 0x4>;
-			};
-
-			IIC: i2c@ef600500 {
-				compatible = "ibm,iic-405gp", "ibm,iic";
-				reg = <0xef600500 0x11>;
-				interrupt-parent = <0x2>;
-				interrupts = <0x2 0x4>;
-			};
-
-			GPIO: gpio@ef600700 {
-				compatible = "ibm,gpio-405gp";
-				reg = <0xef600700 0x20>;
-			};
-
-			EMAC: ethernet@ef600800 {
-				device_type = "network";
-				compatible = "ibm,emac-405gp", "ibm,emac";
-				interrupt-parent = <0x2>;
-				interrupts = <0xf 0x4 0x9 0x4>;
-				local-mac-address = [00 00 00 00 00 00];
-				reg = <0xef600800 0x70>;
-				mal-device = <0x3>;
-				mal-tx-channel = <0x0>;
-				mal-rx-channel = <0x0>;
-				cell-index = <0x0>;
-				max-frame-size = <0x5dc>;
-				rx-fifo-size = <0x1000>;
-				tx-fifo-size = <0x800>;
-				phy-mode = "rmii";
-				phy-map = <0x1>;
-			};
-		};
-
-		EBC0: ebc {
-			compatible = "ibm,ebc-405gp", "ibm,ebc";
-			dcr-reg = <0x12 0x2>;
-			#address-cells = <0x2>;
-			#size-cells = <0x1>;
-			clock-frequency = <0x0>;	/* Filled in by U-Boot */
-
-			sram@0,0 {
-				reg = <0x0 0x0 0x80000>;
-			};
-
-			flash@0,80000 {
-				compatible = "jedec-flash";
-				bank-width = <0x1>;
-				reg = <0x0 0x80000 0x80000>;
-				#address-cells = <0x1>;
-				#size-cells = <0x1>;
-
-				partition@0 {
-					label = "OpenBIOS";
-					reg = <0x0 0x80000>;
-					read-only;
-				};
-			};
-		};
-	};
-
-	chosen {
-		linux,stdout-path = "/plb/opb/serial@ef600300";
-	};
-};

arch/powerpc/boot/dts/yosemite.dts

@@ -138,6 +138,42 @@ EBC0: ebc {
 				clock-frequency = <0>; /* Filled in by zImage */
 				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x04000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02540000>;
+					};
+					partition@3f40000 {
+						label = "env";
+						reg = <0x03f40000 0x00040000>;
+					};
+					partition@3f80000 {
+						label = "u-boot";
+						reg = <0x03f80000 0x00080000>;
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {

arch/powerpc/configs/40x/hcu4_defconfig

-CONFIG_40x=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_HCU4=y
-# CONFIG_WALNUT is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_OF_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=35000
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_IBM_NEW_EMAC=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/powerpc/configs/ppc40x_defconfig

@@ -14,7 +14,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_PPC4xx_GPIO=y
 CONFIG_ACADIA=y
 CONFIG_EP405=y
-CONFIG_HCU4=y
 CONFIG_HOTFOOT=y
 CONFIG_KILAUEA=y
 CONFIG_MAKALU=y

arch/powerpc/include/asm/kexec.h

@@ -2,7 +2,7 @@
 #define _ASM_POWERPC_KEXEC_H
 #ifdef __KERNEL__
 
-#ifdef CONFIG_FSL_BOOKE
+#if defined(CONFIG_FSL_BOOKE) || defined(CONFIG_44x)
 
 /*
  * On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory

arch/powerpc/kernel/misc_32.S

@@ -8,6 +8,8 @@
  * kexec bits:
  * Copyright (C) 2002-2003 Eric Biederman  <ebiederm@xmission.com>
  * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
+ * PPC44x port. Copyright (C) 2011,  IBM Corporation
+ * 		Author: Suzuki Poulose <suzuki@in.ibm.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -735,6 +737,175 @@ relocate_new_kernel:
 	mr      r4, r30
 	mr      r5, r31
 
+	li	r0, 0
+#elif defined(CONFIG_44x)  && !defined(CONFIG_47x)
+
+/*
+ * Code for setting up 1:1 mapping for PPC440x for KEXEC
+ *
+ * We cannot switch off the MMU on PPC44x.
+ * So we:
+ * 1) Invalidate all the mappings except the one we are running from.
+ * 2) Create a tmp mapping for our code in the other address space(TS) and
+ *    jump to it. Invalidate the entry we started in.
+ * 3) Create a 1:1 mapping for 0-2GiB in chunks of 256M in original TS.
+ * 4) Jump to the 1:1 mapping in original TS.
+ * 5) Invalidate the tmp mapping.
+ *
+ * - Based on the kexec support code for FSL BookE
+ * - Doesn't support 47x yet.
+ *
+ */
+	/* Save our parameters */
+	mr	r29, r3
+	mr	r30, r4
+	mr	r31, r5
+
+	/* Load our MSR_IS and TID to MMUCR for TLB search */
+	mfspr	r3,SPRN_PID
+	mfmsr	r4
+	andi.	r4,r4,MSR_IS@l
+	beq	wmmucr
+	oris	r3,r3,PPC44x_MMUCR_STS@h
+wmmucr:
+	mtspr	SPRN_MMUCR,r3
+	sync
+
+	/*
+	 * Invalidate all the TLB entries except the current entry
+	 * where we are running from
+	 */
+	bl	0f				/* Find our address */
+0:	mflr	r5				/* Make it accessible */
+	tlbsx	r23,0,r5			/* Find entry we are in */
+	li	r4,0				/* Start at TLB entry 0 */
+	li	r3,0				/* Set PAGEID inval value */
+1:	cmpw	r23,r4				/* Is this our entry? */
+	beq	skip				/* If so, skip the inval */
+	tlbwe	r3,r4,PPC44x_TLB_PAGEID		/* If not, inval the entry */
+skip:
+	addi	r4,r4,1				/* Increment */
+	cmpwi	r4,64				/* Are we done?	*/
+	bne	1b				/* If not, repeat */
+	isync
+
+	/* Create a temp mapping and jump to it */
+	andi.	r6, r23, 1		/* Find the index to use */
+	addi	r24, r6, 1		/* r24 will contain 1 or 2 */
+
+	mfmsr	r9			/* get the MSR */
+	rlwinm	r5, r9, 27, 31, 31	/* Extract the MSR[IS] */
+	xori	r7, r5, 1		/* Use the other address space */
+
+	/* Read the current mapping entries */
+	tlbre	r3, r23, PPC44x_TLB_PAGEID
+	tlbre	r4, r23, PPC44x_TLB_XLAT
+	tlbre	r5, r23, PPC44x_TLB_ATTRIB
+
+	/* Save our current XLAT entry */
+	mr	r25, r4
+
+	/* Extract the TLB PageSize */
+	li	r10, 1 			/* r10 will hold PageSize */
+	rlwinm	r11, r3, 0, 24, 27	/* bits 24-27 */
+
+	/* XXX: As of now we use 256M, 4K pages */
+	cmpwi	r11, PPC44x_TLB_256M
+	bne	tlb_4k
+	rotlwi	r10, r10, 28		/* r10 = 256M */
+	b	write_out
+tlb_4k:
+	cmpwi	r11, PPC44x_TLB_4K
+	bne	default
+	rotlwi	r10, r10, 12		/* r10 = 4K */
+	b	write_out
+default:
+	rotlwi	r10, r10, 10		/* r10 = 1K */
+
+write_out:
+	/*
+	 * Write out the tmp 1:1 mapping for this code in other address space
+	 * Fixup  EPN = RPN , TS=other address space
+	 */
+	insrwi	r3, r7, 1, 23		/* Bit 23 is TS for PAGEID field */
+
+	/* Write out the tmp mapping entries */
+	tlbwe	r3, r24, PPC44x_TLB_PAGEID
+	tlbwe	r4, r24, PPC44x_TLB_XLAT
+	tlbwe	r5, r24, PPC44x_TLB_ATTRIB
+
+	subi	r11, r10, 1		/* PageOffset Mask = PageSize - 1 */
+	not	r10, r11		/* Mask for PageNum */
+
+	/* Switch to other address space in MSR */
+	insrwi	r9, r7, 1, 26		/* Set MSR[IS] = r7 */
+
+	bl	1f
+1:	mflr	r8
+	addi	r8, r8, (2f-1b)		/* Find the target offset */
+
+	/* Jump to the tmp mapping */
+	mtspr	SPRN_SRR0, r8
+	mtspr	SPRN_SRR1, r9
+	rfi
+
+2:
+	/* Invalidate the entry we were executing from */
+	li	r3, 0
+	tlbwe	r3, r23, PPC44x_TLB_PAGEID
+
+	/* attribute fields. rwx for SUPERVISOR mode */
+	li	r5, 0
+	ori	r5, r5, (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
+
+	/* Create 1:1 mapping in 256M pages */
+	xori	r7, r7, 1			/* Revert back to Original TS */
+
+	li	r8, 0				/* PageNumber */
+	li	r6, 3				/* TLB Index, start at 3  */
+
+next_tlb:
+	rotlwi	r3, r8, 28			/* Create EPN (bits 0-3) */
+	mr	r4, r3				/* RPN = EPN  */
+	ori	r3, r3, (PPC44x_TLB_VALID | PPC44x_TLB_256M) /* SIZE = 256M, Valid */
+	insrwi	r3, r7, 1, 23			/* Set TS from r7 */
+
+	tlbwe	r3, r6, PPC44x_TLB_PAGEID	/* PageID field : EPN, V, SIZE */
+	tlbwe	r4, r6, PPC44x_TLB_XLAT		/* Address translation : RPN   */
+	tlbwe	r5, r6, PPC44x_TLB_ATTRIB	/* Attributes */
+
+	addi	r8, r8, 1			/* Increment PN */
+	addi	r6, r6, 1			/* Increment TLB Index */
+	cmpwi	r8, 8				/* Are we done ? */
+	bne	next_tlb
+	isync
+
+	/* Jump to the new mapping 1:1 */
+	li	r9,0
+	insrwi	r9, r7, 1, 26			/* Set MSR[IS] = r7 */
+
+	bl	1f
+1:	mflr	r8
+	and	r8, r8, r11			/* Get our offset within page */
+	addi	r8, r8, (2f-1b)
+
+	and	r5, r25, r10			/* Get our target PageNum */
+	or	r8, r8, r5			/* Target jump address */
+
+	mtspr	SPRN_SRR0, r8
+	mtspr	SPRN_SRR1, r9
+	rfi
+2:
+	/* Invalidate the tmp entry we used */
+	li	r3, 0
+	tlbwe	r3, r24, PPC44x_TLB_PAGEID
+	sync
+
+	/* Restore the parameters */
+	mr	r3, r29
+	mr	r4, r30
+	mr	r5, r31
+
 	li	r0, 0
 #else
 	li	r0, 0

arch/powerpc/platforms/40x/Kconfig

@@ -32,14 +32,6 @@ config EP405
 	help
 	  This option enables support for the EP405/EP405PC boards.
 
-config HCU4
-	bool "Hcu4"
-	depends on 40x
-	default n
-	select 405GPR
-	help
-	  This option enables support for the Nestal Maschinen HCU4 board.
-
 config HOTFOOT
         bool "Hotfoot"
 	depends on 40x

arch/powerpc/platforms/40x/Makefile

-obj-$(CONFIG_HCU4)				+= hcu4.o
 obj-$(CONFIG_WALNUT)				+= walnut.o
 obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD)	+= virtex.o
 obj-$(CONFIG_EP405)				+= ep405.o

arch/powerpc/platforms/40x/hcu4.c

-/*
- * Architecture- / platform-specific boot-time initialization code for
- * IBM PowerPC 4xx based boards. Adapted from original
- * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
- * <dan@net4x.com>.
- *
- * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
- *
- * Rewritten and ported to the merged powerpc tree:
- * Copyright 2007 IBM Corporation
- * Josh Boyer <jwboyer@linux.vnet.ibm.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/of_platform.h>
-
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/udbg.h>
-#include <asm/time.h>
-#include <asm/uic.h>
-#include <asm/ppc4xx.h>
-
-static __initdata struct of_device_id hcu4_of_bus[] = {
-	{ .compatible = "ibm,plb3", },
-	{ .compatible = "ibm,opb", },
-	{ .compatible = "ibm,ebc", },
-	{},
-};
-
-static int __init hcu4_device_probe(void)
-{
-	of_platform_bus_probe(NULL, hcu4_of_bus, NULL);
-	return 0;
-}
-machine_device_initcall(hcu4, hcu4_device_probe);
-
-static int __init hcu4_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "netstal,hcu4"))
-		return 0;
-
-	return 1;
-}
-
-define_machine(hcu4) {
-	.name			= "HCU4",
-	.probe			= hcu4_probe,
-	.progress		= udbg_progress,
-	.init_IRQ		= uic_init_tree,
-	.get_irq		= uic_get_irq,
-	.restart		= ppc4xx_reset_system,
-	.calibrate_decr		= generic_calibrate_decr,
-};

arch/powerpc/sysdev/ppc4xx_pci.c

@@ -1092,6 +1092,10 @@ static int __init ppc460sx_pciex_core_init(struct device_node *np)
 	mtdcri(SDR0, PESDR1_460SX_HSSSLEW, 0xFFFF0000);
 	mtdcri(SDR0, PESDR2_460SX_HSSSLEW, 0xFFFF0000);
 
+	/* Set HSS PRBS enabled */
+	mtdcri(SDR0, PESDR0_460SX_HSSCTLSET, 0x00001130);
+	mtdcri(SDR0, PESDR2_460SX_HSSCTLSET, 0x00001130);
+
 	udelay(100);
 
 	/* De-assert PLLRESET */
@@ -1132,9 +1136,6 @@ static int ppc460sx_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
 		dcri_clrset(SDR0, port->sdr_base + PESDRn_UTLSET2,
 				0, 0x01000000);
 
-	/*Gen-1*/
-	mtdcri(SDR0, port->sdr_base + PESDRn_460SX_RCEI, 0x08000000);
-
 	dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
 			(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL),
 			PESDRx_RCSSET_RSTPYN);
@@ -1148,14 +1149,42 @@ static int ppc460sx_pciex_init_utl(struct ppc4xx_pciex_port *port)
 {
 	/* Max 128 Bytes */
 	out_be32 (port->utl_base + PEUTL_PBBSZ,   0x00000000);
+	/* Assert VRB and TXE - per datasheet turn off addr validation */
+	out_be32(port->utl_base + PEUTL_PCTL,  0x80800000);
 	return 0;
 }
 
+static void __init ppc460sx_pciex_check_link(struct ppc4xx_pciex_port *port)
+{
+	void __iomem *mbase;
+	int attempt = 50;
+
+	port->link = 0;
+
+	mbase = ioremap(port->cfg_space.start + 0x10000000, 0x1000);
+	if (mbase == NULL) {
+		printk(KERN_ERR "%s: Can't map internal config space !",
+			port->node->full_name);
+		goto done;
+	}
+
+	while (attempt && (0 == (in_le32(mbase + PECFG_460SX_DLLSTA)
+			& PECFG_460SX_DLLSTA_LINKUP))) {
+		attempt--;
+		mdelay(10);
+	}
+	if (attempt)
+		port->link = 1;
+done:
+	iounmap(mbase);
+
+}
+
 static struct ppc4xx_pciex_hwops ppc460sx_pcie_hwops __initdata = {
 	.core_init	= ppc460sx_pciex_core_init,
 	.port_init_hw	= ppc460sx_pciex_init_port_hw,
 	.setup_utl	= ppc460sx_pciex_init_utl,
-	.check_link	= ppc4xx_pciex_check_link_sdr,
+	.check_link	= ppc460sx_pciex_check_link,
 };
 
 #endif /* CONFIG_44x */
@@ -1338,15 +1367,15 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port)
 	if (rc != 0)
 		return rc;
 
-	if (ppc4xx_pciex_hwops->check_link)
-		ppc4xx_pciex_hwops->check_link(port);
-
 	/*
 	 * Initialize mapping: disable all regions and configure
 	 * CFG and REG regions based on resources in the device tree
 	 */
 	ppc4xx_pciex_port_init_mapping(port);
 
+	if (ppc4xx_pciex_hwops->check_link)
+		ppc4xx_pciex_hwops->check_link(port);
+
 	/*
 	 * Map UTL
 	 */
@@ -1360,13 +1389,23 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port)
 		ppc4xx_pciex_hwops->setup_utl(port);
 
 	/*
-	 * Check for VC0 active and assert RDY.
+	 * Check for VC0 active or PLL Locked and assert RDY.
 	 */
 	if (port->sdr_base) {
-		if (port->link &&
-		    ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS,
-					     1 << 16, 1 << 16, 5000)) {
-			printk(KERN_INFO "PCIE%d: VC0 not active\n", port->index);
+		if (of_device_is_compatible(port->node,
+				"ibm,plb-pciex-460sx")){
+			if (port->link && ppc4xx_pciex_wait_on_sdr(port,
+					PESDRn_RCSSTS,
+					1 << 12, 1 << 12, 5000)) {
+				printk(KERN_INFO "PCIE%d: PLL not locked\n",
+						port->index);
+				port->link = 0;
+			}
+		} else if (port->link &&
+			ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS,
+				1 << 16, 1 << 16, 5000)) {
+			printk(KERN_INFO "PCIE%d: VC0 not active\n",
+					port->index);
 			port->link = 0;
 		}
 
@@ -1573,8 +1612,15 @@ static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port	*port,
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAH, lah);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAL, lal);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKH, 0x7fffffff);
-		/* Note that 3 here means enabled | single region */
-		dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | 3);
+		/*Enabled and single region */
+		if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+			dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+				sa | DCRO_PEGPL_460SX_OMR1MSKL_UOT
+					| DCRO_PEGPL_OMRxMSKL_VAL);
+		else
+			dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL,
+				sa | DCRO_PEGPL_OMR1MSKL_UOT
+					| DCRO_PEGPL_OMRxMSKL_VAL);
 		break;
 	case 1:
 		out_le32(mbase + PECFG_POM1LAH, pciah);
@@ -1582,8 +1628,8 @@ static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port	*port,
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAH, lah);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAL, lal);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKH, 0x7fffffff);
-		/* Note that 3 here means enabled | single region */
-		dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, sa | 3);
+		dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL,
+				sa | DCRO_PEGPL_OMRxMSKL_VAL);
 		break;
 	case 2:
 		out_le32(mbase + PECFG_POM2LAH, pciah);
@@ -1592,7 +1638,9 @@ static int __init ppc4xx_setup_one_pciex_POM(struct ppc4xx_pciex_port	*port,
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAL, lal);
 		dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKH, 0x7fffffff);
 		/* Note that 3 here means enabled | IO space !!! */
-		dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, sa | 3);
+		dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL,
+				sa | DCRO_PEGPL_OMR3MSKL_IO
+					| DCRO_PEGPL_OMRxMSKL_VAL);
 		break;
 	}
 
@@ -1693,6 +1741,9 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
 		if (res->flags & IORESOURCE_PREFETCH)
 			sa |= 0x8;
 
+		if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+			sa |= PCI_BASE_ADDRESS_MEM_TYPE_64;
+
 		out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
 		out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa));
 
@@ -1854,6 +1905,10 @@ static void __init ppc4xx_pciex_port_setup_hose(struct ppc4xx_pciex_port *port)
 	}
 	out_le16(mbase + 0x202, val);
 
+	/* Enable Bus master, memory, and io space */
+	if (of_device_is_compatible(port->node, "ibm,plb-pciex-460sx"))
+		out_le16(mbase + 0x204, 0x7);
+
 	if (!port->endpoint) {
 		/* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
 		out_le32(mbase + 0x208, 0x06040001);

arch/powerpc/sysdev/ppc4xx_pci.h

@@ -464,6 +464,18 @@
 #define PECFG_POM2LAL		0x390
 #define PECFG_POM2LAH		0x394
 
+/* 460sx only */
+#define PECFG_460SX_DLLSTA     0x3f8
+
+/* 460sx Bit Mappings */
+#define PECFG_460SX_DLLSTA_LINKUP	 0x00000010
+#define DCRO_PEGPL_460SX_OMR1MSKL_UOT	 0x00000004
+
+/* PEGPL Bit Mappings */
+#define DCRO_PEGPL_OMRxMSKL_VAL	 0x00000001
+#define DCRO_PEGPL_OMR1MSKL_UOT	 0x00000002
+#define DCRO_PEGPL_OMR3MSKL_IO	 0x00000002
+
 /* SDR Bit Mappings */
 #define PESDRx_RCSSET_HLDPLB	0x10000000
 #define PESDRx_RCSSET_RSTGU	0x01000000

drivers/edac/ppc4xx_edac.c

@@ -205,7 +205,7 @@ static struct platform_driver ppc4xx_edac_driver = {
 	.remove			= ppc4xx_edac_remove,
 	.driver = {
 		.owner = THIS_MODULE,
-		.name = PPC4XX_EDAC_MODULE_NAME
+		.name = PPC4XX_EDAC_MODULE_NAME,
 		.of_match_table = ppc4xx_edac_match,
 	},
 };