Commit 9c61a9dc authored by Jesse Brandeburg's avatar Jesse Brandeburg Committed by Jeff Garzik

ixgb: remove irq_sem

ixgb can remove irq_sem by auditing all the call sites to make sure
that each of them makes sure the adapter is in the correct state
before re-enabling interrupts.  after doing this to all of our other
drivers it is becoming easier.
Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: default avatarAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 9150b76a
......@@ -158,7 +158,6 @@ struct ixgb_adapter {
uint16_t link_speed;
uint16_t link_duplex;
spinlock_t tx_lock;
atomic_t irq_sem;
struct work_struct tx_timeout_task;
struct timer_list blink_timer;
......
......@@ -197,7 +197,6 @@ module_exit(ixgb_exit_module);
static void
ixgb_irq_disable(struct ixgb_adapter *adapter)
{
atomic_inc(&adapter->irq_sem);
IXGB_WRITE_REG(&adapter->hw, IMC, ~0);
IXGB_WRITE_FLUSH(&adapter->hw);
synchronize_irq(adapter->pdev->irq);
......@@ -211,14 +210,12 @@ ixgb_irq_disable(struct ixgb_adapter *adapter)
static void
ixgb_irq_enable(struct ixgb_adapter *adapter)
{
if(atomic_dec_and_test(&adapter->irq_sem)) {
u32 val = IXGB_INT_RXT0 | IXGB_INT_RXDMT0 |
IXGB_INT_TXDW | IXGB_INT_LSC;
if (adapter->hw.subsystem_vendor_id == SUN_SUBVENDOR_ID)
val |= IXGB_INT_GPI0;
IXGB_WRITE_REG(&adapter->hw, IMS, val);
IXGB_WRITE_FLUSH(&adapter->hw);
}
u32 val = IXGB_INT_RXT0 | IXGB_INT_RXDMT0 |
IXGB_INT_TXDW | IXGB_INT_LSC;
if (adapter->hw.subsystem_vendor_id == SUN_SUBVENDOR_ID)
val |= IXGB_INT_GPI0;
IXGB_WRITE_REG(&adapter->hw, IMS, val);
IXGB_WRITE_FLUSH(&adapter->hw);
}
int
......@@ -305,7 +302,6 @@ ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog)
#ifdef CONFIG_IXGB_NAPI
napi_disable(&adapter->napi);
atomic_set(&adapter->irq_sem, 0);
#endif
/* waiting for NAPI to complete can re-enable interrupts */
ixgb_irq_disable(adapter);
......@@ -594,7 +590,6 @@ ixgb_sw_init(struct ixgb_adapter *adapter)
/* enable flow control to be programmed */
hw->fc.send_xon = 1;
atomic_set(&adapter->irq_sem, 1);
spin_lock_init(&adapter->tx_lock);
set_bit(__IXGB_DOWN, &adapter->flags);
......@@ -1774,7 +1769,6 @@ ixgb_intr(int irq, void *data)
of the posted write is intentionally left out.
*/
atomic_inc(&adapter->irq_sem);
IXGB_WRITE_REG(&adapter->hw, IMC, ~0);
__netif_rx_schedule(netdev, &adapter->napi);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment