Commit 9c8fb548 authored by Vasanthakumar Thiagarajan's avatar Vasanthakumar Thiagarajan Committed by Kalle Valo

ath10k: add cycle/rx_clear counters frequency to hw_params

The frequency at which cycle/rx_clear counters are running might
change from one target type to another. QCA99X0 is running the
counters at 150Mhz while QCA9888X and QCA6174 are running at 88Mhz.
Add a new entry to hw_params to store the target specific frequency
and use it in msecs conversion. This change fixes inconsistent
channel active/busy time.
Signed-off-by: default avatarVasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
parent 3d2a2e29
......@@ -53,6 +53,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.uart_pin = 7,
.has_shifted_cc_wraparound = true,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.fw = {
.dir = QCA988X_HW_2_0_FW_DIR,
.fw = QCA988X_HW_2_0_FW_FILE,
......@@ -68,6 +69,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
.uart_pin = 6,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.fw = {
.dir = QCA6174_HW_2_1_FW_DIR,
.fw = QCA6174_HW_2_1_FW_FILE,
......@@ -83,6 +85,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.fw = {
.dir = QCA6174_HW_3_0_FW_DIR,
.fw = QCA6174_HW_3_0_FW_FILE,
......@@ -98,6 +101,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
.uart_pin = 6,
.otp_exe_param = 0,
.channel_counters_freq_hz = 88000,
.fw = {
/* uses same binaries as hw3.0 */
.dir = QCA6174_HW_3_0_FW_DIR,
......@@ -115,6 +119,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.uart_pin = 7,
.otp_exe_param = 0x00000700,
.continuous_frag_desc = true,
.channel_counters_freq_hz = 150000,
.fw = {
.dir = QCA99X0_HW_2_0_FW_DIR,
.fw = QCA99X0_HW_2_0_FW_FILE,
......
......@@ -609,6 +609,8 @@ struct ath10k {
*/
bool continuous_frag_desc;
u32 channel_counters_freq_hz;
struct ath10k_hw_params_fw {
const char *dir;
const char *fw;
......
......@@ -152,6 +152,6 @@ void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
cc -= cc_prev - cc_fix;
rcc -= rcc_prev;
survey->time = CCNT_TO_MSEC(cc);
survey->time_busy = CCNT_TO_MSEC(rcc);
survey->time = CCNT_TO_MSEC(ar, cc);
survey->time_busy = CCNT_TO_MSEC(ar, rcc);
}
......@@ -552,8 +552,7 @@ enum ath10k_hw_rate_cck {
#define SCRATCH_3_ADDRESS ar->regs->scratch_3_address
#define CPU_INTR_ADDRESS 0x0010
/* Cycle counters are running at 88MHz */
#define CCNT_TO_MSEC(x) ((x) / 88000)
#define CCNT_TO_MSEC(ar, x) ((x) / ar->hw_params.channel_counters_freq_hz)
/* Firmware indications to the Host via SCRATCH_3 register. */
#define FW_INDICATOR_ADDRESS ar->regs->fw_indicator_address
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment