ath10k: add cycle/rx_clear counters frequency to hw_params

The frequency at which cycle/rx_clear counters are running might
change from one target type to another. QCA99X0 is running the
counters at 150Mhz while QCA9888X and QCA6174 are running at 88Mhz.
Add a new entry to hw_params to store the target specific frequency
and use it in msecs conversion. This change fixes inconsistent
channel active/busy time.
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/core.c

@@ -53,6 +53,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.uart_pin = 7,
 		.has_shifted_cc_wraparound = true,
 		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
 		.fw = {
 			.dir = QCA988X_HW_2_0_FW_DIR,
 			.fw = QCA988X_HW_2_0_FW_FILE,
@@ -68,6 +69,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.patch_load_addr = QCA6174_HW_2_1_PATCH_LOAD_ADDR,
 		.uart_pin = 6,
 		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
 		.fw = {
 			.dir = QCA6174_HW_2_1_FW_DIR,
 			.fw = QCA6174_HW_2_1_FW_FILE,
@@ -83,6 +85,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
 		.uart_pin = 6,
 		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
 		.fw = {
 			.dir = QCA6174_HW_3_0_FW_DIR,
 			.fw = QCA6174_HW_3_0_FW_FILE,
@@ -98,6 +101,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.patch_load_addr = QCA6174_HW_3_0_PATCH_LOAD_ADDR,
 		.uart_pin = 6,
 		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
 		.fw = {
 			/* uses same binaries as hw3.0 */
 			.dir = QCA6174_HW_3_0_FW_DIR,
@@ -115,6 +119,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.uart_pin = 7,
 		.otp_exe_param = 0x00000700,
 		.continuous_frag_desc = true,
+		.channel_counters_freq_hz = 150000,
 		.fw = {
 			.dir = QCA99X0_HW_2_0_FW_DIR,
 			.fw = QCA99X0_HW_2_0_FW_FILE,

drivers/net/wireless/ath/ath10k/core.h

@@ -609,6 +609,8 @@ struct ath10k {
 		 */
 		bool continuous_frag_desc;
 
+		u32 channel_counters_freq_hz;
+
 		struct ath10k_hw_params_fw {
 			const char *dir;
 			const char *fw;

drivers/net/wireless/ath/ath10k/hw.c

@@ -152,6 +152,6 @@ void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
 	cc -= cc_prev - cc_fix;
 	rcc -= rcc_prev;
 
-	survey->time = CCNT_TO_MSEC(cc);
-	survey->time_busy = CCNT_TO_MSEC(rcc);
+	survey->time = CCNT_TO_MSEC(ar, cc);
+	survey->time_busy = CCNT_TO_MSEC(ar, rcc);
 }

drivers/net/wireless/ath/ath10k/hw.h

@@ -552,8 +552,7 @@ enum ath10k_hw_rate_cck {
 #define SCRATCH_3_ADDRESS			ar->regs->scratch_3_address
 #define CPU_INTR_ADDRESS			0x0010
 
-/* Cycle counters are running at 88MHz */
-#define CCNT_TO_MSEC(x) ((x) / 88000)
+#define CCNT_TO_MSEC(ar, x) ((x) / ar->hw_params.channel_counters_freq_hz)
 
 /* Firmware indications to the Host via SCRATCH_3 register. */
 #define FW_INDICATOR_ADDRESS			ar->regs->fw_indicator_address