Commit 9cfc5c90 authored by Russell King's avatar Russell King Committed by Gregory CLEMENT

dt-bindings: add Marvell PMU documentation

Add the required DT binding documentation for the Marvell PMU driver.
Acked-by: default avatarRob Herring <robh@kernel.org>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
parent 860a8865
Device Tree bindings for Marvell PMU
Required properties:
- compatible: value should be "marvell,dove-pmu".
May also include "simple-bus" if there are child devices, in which
case the ranges node is required.
- reg: two base addresses and sizes of the PM controller and PMU.
- interrupts: single interrupt number for the PMU interrupt
- interrupt-controller: must be specified as the PMU itself is an
interrupt controller.
- #interrupt-cells: must be 1.
- #reset-cells: must be 1.
- domains: sub-node containing domain descriptions
Optional properties:
- ranges: defines the address mapping for child devices, as per the
standard property of this name. Required when compatible includes
"simple-bus".
Power domain descriptions are listed as child nodes of the "domains"
sub-node. Each domain has the following properties:
Required properties:
- #power-domain-cells: must be 0.
Optional properties:
- marvell,pmu_pwr_mask: specifies the mask value for PMU power register
- marvell,pmu_iso_mask: specifies the mask value for PMU isolation register
- resets: points to the reset manager (PMU node) and reset index.
Example:
pmu: power-management@d0000 {
compatible = "marvell,dove-pmu";
reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
interrupts = <33>;
interrupt-controller;
#interrupt-cells = <1>;
#reset-cells = <1>;
domains {
vpu_domain: vpu-domain {
#power-domain-cells = <0>;
marvell,pmu_pwr_mask = <0x00000008>;
marvell,pmu_iso_mask = <0x00000001>;
resets = <&pmu 16>;
};
gpu_domain: gpu-domain {
#power-domain-cells = <0>;
marvell,pmu_pwr_mask = <0x00000004>;
marvell,pmu_iso_mask = <0x00000002>;
resets = <&pmu 18>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment