Commit 9dab15b1 authored by Rasmus Villemoes's avatar Rasmus Villemoes Committed by Li Yang

soc: fsl: qe: merge qe_ic.h headers into qe_ic.c

The public qe_ic.h header is no longer included by anything but
qe_ic.c. Merge both headers into qe_ic.c, and drop the unused
constants.
Reviewed-by: default avatarTimur Tabi <timur@kernel.org>
Signed-off-by: default avatarRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: default avatarLi Yang <leoyang.li@nxp.com>
parent 882c626d
......@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/irq.h>
#include <linux/reboot.h>
#include <linux/slab.h>
#include <linux/stddef.h>
......@@ -25,9 +26,56 @@
#include <asm/irq.h>
#include <asm/io.h>
#include <soc/fsl/qe/qe.h>
#include <soc/fsl/qe/qe_ic.h>
#include "qe_ic.h"
#define NR_QE_IC_INTS 64
/* QE IC registers offset */
#define QEIC_CICR 0x00
#define QEIC_CIVEC 0x04
#define QEIC_CIPXCC 0x10
#define QEIC_CIPYCC 0x14
#define QEIC_CIPWCC 0x18
#define QEIC_CIPZCC 0x1c
#define QEIC_CIMR 0x20
#define QEIC_CRIMR 0x24
#define QEIC_CIPRTA 0x30
#define QEIC_CIPRTB 0x34
#define QEIC_CHIVEC 0x60
struct qe_ic {
/* Control registers offset */
u32 __iomem *regs;
/* The remapper for this QEIC */
struct irq_domain *irqhost;
/* The "linux" controller struct */
struct irq_chip hc_irq;
/* VIRQ numbers of QE high/low irqs */
unsigned int virq_high;
unsigned int virq_low;
};
/*
* QE interrupt controller internal structure
*/
struct qe_ic_info {
/* Location of this source at the QIMR register */
u32 mask;
/* Mask register offset */
u32 mask_reg;
/*
* For grouped interrupts sources - the interrupt code as
* appears at the group priority register
*/
u8 pri_code;
/* Group priority register offset */
u32 pri_reg;
};
static DEFINE_RAW_SPINLOCK(qe_ic_lock);
......
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* drivers/soc/fsl/qe/qe_ic.h
*
* QUICC ENGINE Interrupt Controller Header
*
* Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Author: Li Yang <leoli@freescale.com>
* Based on code from Shlomi Gridish <gridish@freescale.com>
*/
#ifndef _POWERPC_SYSDEV_QE_IC_H
#define _POWERPC_SYSDEV_QE_IC_H
#include <soc/fsl/qe/qe_ic.h>
#define NR_QE_IC_INTS 64
/* QE IC registers offset */
#define QEIC_CICR 0x00
#define QEIC_CIVEC 0x04
#define QEIC_CRIPNR 0x08
#define QEIC_CIPNR 0x0c
#define QEIC_CIPXCC 0x10
#define QEIC_CIPYCC 0x14
#define QEIC_CIPWCC 0x18
#define QEIC_CIPZCC 0x1c
#define QEIC_CIMR 0x20
#define QEIC_CRIMR 0x24
#define QEIC_CICNR 0x28
#define QEIC_CIPRTA 0x30
#define QEIC_CIPRTB 0x34
#define QEIC_CRICR 0x3c
#define QEIC_CHIVEC 0x60
/* Interrupt priority registers */
#define CIPCC_SHIFT_PRI0 29
#define CIPCC_SHIFT_PRI1 26
#define CIPCC_SHIFT_PRI2 23
#define CIPCC_SHIFT_PRI3 20
#define CIPCC_SHIFT_PRI4 13
#define CIPCC_SHIFT_PRI5 10
#define CIPCC_SHIFT_PRI6 7
#define CIPCC_SHIFT_PRI7 4
/* CICR priority modes */
#define CICR_GWCC 0x00040000
#define CICR_GXCC 0x00020000
#define CICR_GYCC 0x00010000
#define CICR_GZCC 0x00080000
#define CICR_GRTA 0x00200000
#define CICR_GRTB 0x00400000
#define CICR_HPIT_SHIFT 8
#define CICR_HPIT_MASK 0x00000300
#define CICR_HP_SHIFT 24
#define CICR_HP_MASK 0x3f000000
/* CICNR */
#define CICNR_WCC1T_SHIFT 20
#define CICNR_ZCC1T_SHIFT 28
#define CICNR_YCC1T_SHIFT 12
#define CICNR_XCC1T_SHIFT 4
/* CRICR */
#define CRICR_RTA1T_SHIFT 20
#define CRICR_RTB1T_SHIFT 28
/* Signal indicator */
#define SIGNAL_MASK 3
#define SIGNAL_HIGH 2
#define SIGNAL_LOW 0
struct qe_ic {
/* Control registers offset */
u32 __iomem *regs;
/* The remapper for this QEIC */
struct irq_domain *irqhost;
/* The "linux" controller struct */
struct irq_chip hc_irq;
/* VIRQ numbers of QE high/low irqs */
unsigned int virq_high;
unsigned int virq_low;
};
/*
* QE interrupt controller internal structure
*/
struct qe_ic_info {
u32 mask; /* location of this source at the QIMR register. */
u32 mask_reg; /* Mask register offset */
u8 pri_code; /* for grouped interrupts sources - the interrupt
code as appears at the group priority register */
u32 pri_reg; /* Group priority register offset */
};
#endif /* _POWERPC_SYSDEV_QE_IC_H */
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved.
*
* Authors: Shlomi Gridish <gridish@freescale.com>
* Li Yang <leoli@freescale.com>
*
* Description:
* QE IC external definitions and structure.
*/
#ifndef _ASM_POWERPC_QE_IC_H
#define _ASM_POWERPC_QE_IC_H
#include <linux/irq.h>
struct device_node;
struct qe_ic;
#define NUM_OF_QE_IC_GROUPS 6
/* Flags when we init the QE IC */
#define QE_IC_SPREADMODE_GRP_W 0x00000001
#define QE_IC_SPREADMODE_GRP_X 0x00000002
#define QE_IC_SPREADMODE_GRP_Y 0x00000004
#define QE_IC_SPREADMODE_GRP_Z 0x00000008
#define QE_IC_SPREADMODE_GRP_RISCA 0x00000010
#define QE_IC_SPREADMODE_GRP_RISCB 0x00000020
#define QE_IC_LOW_SIGNAL 0x00000100
#define QE_IC_HIGH_SIGNAL 0x00000200
#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH 0x00001000
#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH 0x00002000
#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH 0x00004000
#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH 0x00008000
#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH 0x00010000
#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH 0x00020000
#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH 0x00040000
#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH 0x00080000
#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH 0x00100000
#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH 0x00200000
#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH 0x00400000
#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH 0x00800000
#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT (12)
/* QE interrupt sources groups */
enum qe_ic_grp_id {
QE_IC_GRP_W = 0, /* QE interrupt controller group W */
QE_IC_GRP_X, /* QE interrupt controller group X */
QE_IC_GRP_Y, /* QE interrupt controller group Y */
QE_IC_GRP_Z, /* QE interrupt controller group Z */
QE_IC_GRP_RISCA, /* QE interrupt controller RISC group A */
QE_IC_GRP_RISCB /* QE interrupt controller RISC group B */
};
#endif /* _ASM_POWERPC_QE_IC_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment