mfd: lochnagar: Move binding over to dtschema

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt

-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform.  Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-Also see these documents for generic binding information:
-  [1] GPIO : ../gpio/gpio.txt
-
-And these for relevant defines:
-  [2] include/dt-bindings/pinctrl/lochnagar.h
-  [3] include/dt-bindings/clock/lochnagar.h
-
-And these documents for the required sub-node binding details:
-  [4] Clock: ../clock/cirrus,lochnagar.txt
-  [5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt
-  [6] Regulator: ../regulator/cirrus,lochnagar.txt
-  [7] Sound: ../sound/cirrus,lochnagar.txt
-  [8] Hardware Monitor: ../hwmon/cirrus,lochnagar.txt
-
-Required properties:
-
-  - compatible : One of the following strings:
-                 "cirrus,lochnagar1"
-                 "cirrus,lochnagar2"
-
-  - reg : I2C slave address
-
-  - reset-gpios : Reset line to the Lochnagar, see [1].
-
-Required sub-nodes:
-
-  - lochnagar-clk : Binding for the clocking components, see [4].
-
-  - lochnagar-pinctrl : Binding for the pin control components, see [5].
-
-Optional sub-nodes:
-
-  - Bindings for the regulator components, see [6]. Only available on
-    Lochnagar 2.
-
-  - lochnagar-sc : Binding for the sound card components, see [7].
-                   Only available on Lochnagar 2.
-  - lochnagar-hwmon : Binding for the hardware monitor components, see [8].
-                      Only available on Lochnagar 2.
-
-Optional properties:
-
-  - present-gpios : Host present line, indicating the presence of a
-    host system, see [1]. This can be omitted if the present line is
-    tied in hardware.
-
-Example:
-
-lochnagar: lochnagar@22 {
-	compatible = "cirrus,lochnagar2";
-	reg = <0x22>;
-
-	reset-gpios = <&gpio0 55 0>;
-	present-gpios = <&gpio0 60 0>;
-
-	lochnagar-clk {
-		compatible = "cirrus,lochnagar2-clk";
-		...
-	};
-
-	lochnagar-pinctrl {
-		compatible = "cirrus,lochnagar-pinctrl";
-		...
-	};
-
-	lochnagar-sc {
-		compatible = "cirrus,lochnagar2-soundcard";
-		...
-	};
-
-	lochnagar-hwmon {
-		compatible = "cirrus,lochnagar2-hwmon";
-		...
-	};
-};

Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/cirrus,lochnagar.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Lochnagar Audio Development Board
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  Lochnagar is an evaluation and development board for Cirrus Logic
+  Smart CODEC and Amp devices. It allows the connection of most Cirrus
+  Logic devices on mini-cards, as well as allowing connection of
+  various application processor systems to provide a full evaluation
+  platform.  Audio system topology, clocking and power can all be
+  controlled through the Lochnagar, allowing the device under test
+  to be used in a variety of possible use cases.
+
+  Also see these documents for generic binding information:
+    [1] GPIO : ../gpio/gpio.txt
+
+  And these for relevant defines:
+    [2] include/dt-bindings/pinctrl/lochnagar.h
+    [3] include/dt-bindings/clock/lochnagar.h
+
+  And these documents for the required sub-node binding details:
+    [4] Clock: ../clock/cirrus,lochnagar.yaml
+    [5] Pinctrl: ../pinctrl/cirrus,lochnagar.yaml
+    [6] Sound: ../sound/cirrus,lochnagar.yaml
+    [7] Hardware Monitor: ../hwmon/cirrus,lochnagar.yaml
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - cirrus,lochnagar2
+    then:
+      properties:
+        lochnagar-hwmon:
+          type: object
+          $ref: /schemas/hwmon/cirrus,lochnagar.yaml#
+
+        lochnagar-sc:
+          type: object
+          $ref: /schemas/sound/cirrus,lochnagar.yaml#
+
+properties:
+  compatible:
+    enum:
+      - cirrus,lochnagar1
+      - cirrus,lochnagar2
+
+  reg:
+    const: 0x22
+
+  reset-gpios:
+    maxItems: 1
+
+  present-gpios:
+    description: |
+      Host present line, indicating the presence of a
+      host system, see [1]. This can be omitted if the present line is
+      tied in hardware.
+    maxItems: 1
+
+  lochnagar-clk:
+    type: object
+    $ref: /schemas/clock/cirrus,lochnagar.yaml#
+
+  lochnagar-pmic32k:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 32768
+
+  lochnagar-clk12m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 12288000
+
+  lochnagar-clk11m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 11298600
+
+  lochnagar-clk24m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 24576000
+
+  lochnagar-clk22m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 22579200
+
+  lochnagar-clk8m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 8192000
+
+  lochnagar-usb24m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 24576000
+
+  lochnagar-usb12m:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 12288000
+
+  lochnagar-pinctrl:
+    type: object
+    $ref: /schemas/pinctrl/cirrus,lochnagar.yaml#
+
+  VDDCORE:
+    description:
+      Initialisation data for the VDDCORE regulator, which supplies the
+      CODECs digital core if not being provided by an internal regulator.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    properties:
+      compatible:
+        enum:
+          - cirrus,lochnagar2-vddcore
+
+      SYSVDD-supply:
+        description:
+          Primary power supply for the Lochnagar.
+    required:
+      - compatible
+
+  MICVDD:
+    description:
+      Initialisation data for the MICVDD regulator, which supplies the
+      CODECs MICVDD.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    properties:
+      compatible:
+        enum:
+          - cirrus,lochnagar2-micvdd
+
+      SYSVDD-supply:
+        description:
+          Primary power supply for the Lochnagar.
+    required:
+      - compatible
+
+  MIC1VDD:
+    description:
+      Initialisation data for the MIC1VDD supplies.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    properties:
+      compatible:
+        enum:
+          - cirrus,lochnagar2-mic1vdd
+
+      cirrus,micbias-input:
+        description:
+          A property selecting which of the CODEC minicard micbias outputs
+          should be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 4
+
+      MICBIAS1-supply:
+        description:
+          Regulator supplies for the MIC1VDD outputs, supplying the digital
+          microphones, normally supplied from the attached CODEC.
+    required:
+      - compatible
+
+  MIC2VDD:
+    description:
+      Initialisation data for the MIC2VDD supplies.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    properties:
+      compatible:
+        enum:
+          - cirrus,lochnagar2-mic2vdd
+
+      cirrus,micbias-input:
+        description:
+          A property selecting which of the CODEC minicard micbias outputs
+          should be used.
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 1
+        maximum: 4
+
+      MICBIAS2-supply:
+        description:
+          Regulator supplies for the MIC2VDD outputs, supplying the digital
+          microphones, normally supplied from the attached CODEC.
+    required:
+      - compatible
+
+  VDD1V8:
+    description:
+      Recommended fixed regulator for the VDD1V8 regulator, which supplies
+      the CODECs analog and 1.8V digital supplies.
+    type: object
+    $ref: /schemas/regulator/regulator.yaml#
+    properties:
+      compatible:
+        enum:
+          - regulator-fixed
+
+      regulator-min-microvolt:
+        const: 1800000
+
+      regulator-max-microvolt:
+        const: 1800000
+
+      vin-supply:
+        description:
+          Should be set to same supply as SYSVDD
+    required:
+      - compatible
+      - regulator-min-microvolt
+      - regulator-max-microvolt
+      - regulator-boot-on
+      - regulator-always-on
+      - vin-supply
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - lochnagar-clk
+  - lochnagar-pinctrl
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clk/lochnagar.h>
+    #include <dt-bindings/pinctrl/lochnagar.h>
+    i2c@e0004000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <0xe0004000 0x1000>;
+
+        lochnagar: lochnagar@22 {
+            compatible = "cirrus,lochnagar2";
+            reg = <0x22>;
+
+            reset-gpios = <&gpio0 55 0>;
+            present-gpios = <&gpio0 60 0>;
+
+            lochnagarclk: lochnagar-clk {
+                compatible = "cirrus,lochnagar2-clk";
+
+                #clock-cells = <1>;
+                clocks = <&clkaudio>, <&clkpmic>;
+                clock-names = "ln-gf-mclk2", "ln-pmic-32k";
+
+                assigned-clocks = <&lochnagarclk LOCHNAGAR_CDC_MCLK1>,
+                                  <&lochnagarclk LOCHNAGAR_CDC_MCLK2>;
+                assigned-clock-parents = <&clkaudio>, <&clkpmic>;
+            };
+
+            clkpmic: lochnagar-pmic32k {
+                compatible = "fixed-clock";
+                #clock-cells = <0>;
+                clock-frequency = <32768>;
+            };
+
+            lochnagar-pinctrl {
+                compatible = "cirrus,lochnagar-pinctrl";
+
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&lochnagar 0 0 LOCHNAGAR2_PIN_NUM_GPIOS>;
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&pinsettings>;
+
+                pinsettings: pin-settings {
+                    ap2aif-pins {
+                        input-enable;
+                        groups = "gf-aif1";
+                        function = "codec-aif3";
+                    };
+                    codec2aif-pins {
+                        output-enable;
+                        groups = "codec-aif3";
+                        function = "gf-aif1";
+                    };
+                };
+            };
+
+            lochnagar-sc {
+                compatible = "cirrus,lochnagar2-soundcard";
+
+                #sound-dai-cells = <1>;
+
+                clocks = <&lochnagarclk LOCHNAGAR_SOUNDCARD_MCLK>;
+                clock-names = "mclk";
+            };
+
+            lochnagar-hwmon {
+                compatible = "cirrus,lochnagar2-hwmon";
+            };
+
+            MIC1VDD {
+                compatible = "cirrus,lochnagar2-mic1vdd";
+
+                cirrus,micbias-input = <3>;
+            };
+
+            MICVDD {
+                compatible = "cirrus,lochnagar2-micvdd";
+
+                SYSVDD-supply = <&wallvdd>;
+
+                regulator-min-microvolt = <3300000>;
+                regulator-max-microvolt = <3300000>;
+            };
+
+            VDD1V8 {
+                compatible = "regulator-fixed";
+
+                regulator-name = "VDD1V8";
+                regulator-min-microvolt = <1800000>;
+                regulator-max-microvolt = <1800000>;
+                regulator-boot-on;
+                regulator-always-on;
+
+                vin-supply = <&wallvdd>;
+            };
+        };
+    };

Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt

-Cirrus Logic Lochnagar Audio Development Board
-
-Lochnagar is an evaluation and development board for Cirrus Logic
-Smart CODEC and Amp devices. It allows the connection of most Cirrus
-Logic devices on mini-cards, as well as allowing connection of
-various application processor systems to provide a full evaluation
-platform.  Audio system topology, clocking and power can all be
-controlled through the Lochnagar, allowing the device under test
-to be used in a variety of possible use cases.
-
-This binding document describes the binding for the regulator portion
-of the driver.
-
-Also see these documents for generic binding information:
-  [1] Regulator: ../regulator/regulator.txt
-
-This binding must be part of the Lochnagar MFD binding:
-  [2] ../mfd/cirrus,lochnagar.txt
-
-Optional sub-nodes:
-
-  - VDDCORE : Initialisation data for the VDDCORE regulator, which
-    supplies the CODECs digital core if it has no build regulator for that
-    purpose.
-      Required Properties:
-      - compatible : One of the following strings:
-                     "cirrus,lochnagar2-vddcore"
-      - SYSVDD-supply: Primary power supply for the Lochnagar.
-
-  - MICVDD : Initialisation data for the MICVDD regulator, which
-    supplies the CODECs MICVDD.
-      Required Properties:
-      - compatible : One of the following strings:
-                     "cirrus,lochnagar2-micvdd"
-      - SYSVDD-supply: Primary power supply for the Lochnagar.
-
-  - MIC1VDD, MIC2VDD : Initialisation data for the MICxVDD supplies.
-      Required Properties:
-      - compatible : One of the following strings:
-                     "cirrus,lochnagar2-mic1vdd", "cirrus,lochnagar2-mic2vdd"
-      Optional Properties:
-      - cirrus,micbias-input : A property selecting which of the CODEC
-        minicard micbias outputs should be used, valid values are 1 - 4.
-      - MICBIAS1-supply, MICBIAS2-supply: Regulator supplies for the
-        MICxVDD outputs, supplying the digital microphones, normally
-        supplied from the attached CODEC.
-
-  - VDD1V8 : Recommended fixed regulator for the VDD1V8 regulator, which supplies the
-    CODECs analog and 1.8V digital supplies.
-      Required Properties:
-      - compatible : Should be set to "regulator-fixed"
-      - regulator-min-microvolt : Should be set to 1.8V
-      - regulator-max-microvolt : Should be set to 1.8V
-      - regulator-boot-on
-      - regulator-always-on
-      - vin-supply : Should be set to same supply as SYSVDD
-
-Example:
-
-lochnagar {
-	lochnagar-micvdd: MICVDD {
-		compatible = "cirrus,lochnagar2-micvdd";
-
-		SYSVDD-supply = <&wallvdd>;
-
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	lochnagar-vdd1v8: VDD1V8 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VDD1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-boot-on;
-		regulator-always-on;
-
-		vin-supply = <&wallvdd>;
-	};
-};
-

MAINTAINERS

@@ -4065,12 +4065,11 @@ M:	Charles Keepax <ckeepax@opensource.cirrus.com>
 M:	Richard Fitzgerald <rf@opensource.cirrus.com>
 L:	patches@opensource.cirrus.com
 S:	Supported
-F:	Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
-F:	Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.txt
-F:	Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
-F:	Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt
-F:	Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
-F:	Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt
+F:	Documentation/devicetree/bindings/clock/cirrus,lochnagar.yaml
+F:	Documentation/devicetree/bindings/hwmon/cirrus,lochnagar.yaml
+F:	Documentation/devicetree/bindings/mfd/cirrus,lochnagar.yaml
+F:	Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml
+F:	Documentation/devicetree/bindings/sound/cirrus,lochnagar.yaml
 F:	Documentation/hwmon/lochnagar.rst
 F:	drivers/clk/clk-lochnagar.c
 F:	drivers/hwmon/lochnagar-hwmon.c