Merge tag 'usb-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull PHY fixes from Greg KH:
 "Here are a couple of PHY driver fixes for 4.5-rc4.

  A few small phy issues.  All have been in linux-next with no reported
  issues"

* tag 'usb-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload
  phy: twl4030-usb: Relase usb phy on unload
  phy: core: fix wrong err handle for phy_power_on
  phy: Restrict phy-hi6220-usb to HiSilicon arm64

drivers/phy/Kconfig

@@ -224,6 +224,7 @@ config PHY_MT65XX_USB3
 
 config PHY_HI6220_USB
 	tristate "hi6220 USB PHY support"
+	depends on (ARCH_HISI && ARM64) || COMPILE_TEST
 	select GENERIC_PHY
 	select MFD_SYSCON
 	help

drivers/phy/phy-core.c

@@ -275,20 +275,21 @@ EXPORT_SYMBOL_GPL(phy_exit);
 
 int phy_power_on(struct phy *phy)
 {
-	int ret;
+	int ret = 0;
 
 	if (!phy)
-		return 0;
+		goto out;
 
 	if (phy->pwr) {
 		ret = regulator_enable(phy->pwr);
 		if (ret)
-			return ret;
+			goto out;
 	}
 
 	ret = phy_pm_runtime_get_sync(phy);
 	if (ret < 0 && ret != -ENOTSUPP)
-		return ret;
+		goto err_pm_sync;
+
 	ret = 0; /* Override possible ret == -ENOTSUPP */
 
 	mutex_lock(&phy->mutex);
@@ -296,19 +297,20 @@ int phy_power_on(struct phy *phy)
 		ret = phy->ops->power_on(phy);
 		if (ret < 0) {
 			dev_err(&phy->dev, "phy poweron failed --> %d\n", ret);
-			goto out;
+			goto err_pwr_on;
 		}
 	}
 	++phy->power_count;
 	mutex_unlock(&phy->mutex);
 	return 0;
 
-out:
+err_pwr_on:
 	mutex_unlock(&phy->mutex);
 	phy_pm_runtime_put_sync(phy);
+err_pm_sync:
 	if (phy->pwr)
 		regulator_disable(phy->pwr);
-
+out:
 	return ret;
 }
 EXPORT_SYMBOL_GPL(phy_power_on);

drivers/phy/phy-twl4030-usb.c

@@ -715,6 +715,7 @@ static int twl4030_usb_probe(struct platform_device *pdev)
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
 	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
 
 	/* Our job is to use irqs and status from the power module
 	 * to keep the transceiver disabled when nothing's connected.
@@ -750,6 +751,7 @@ static int twl4030_usb_remove(struct platform_device *pdev)
 	struct twl4030_usb *twl = platform_get_drvdata(pdev);
 	int val;
 
+	usb_remove_phy(&twl->phy);
 	pm_runtime_get_sync(twl->dev);
 	cancel_delayed_work(&twl->id_workaround_work);
 	device_remove_file(twl->dev, &dev_attr_vbus);
@@ -757,6 +759,13 @@ static int twl4030_usb_remove(struct platform_device *pdev)
 	/* set transceiver mode to power on defaults */
 	twl4030_usb_set_mode(twl, -1);
 
+	/* idle ulpi before powering off */
+	if (cable_present(twl->linkstat))
+		pm_runtime_put_noidle(twl->dev);
+	pm_runtime_mark_last_busy(twl->dev);
+	pm_runtime_put_sync_suspend(twl->dev);
+	pm_runtime_disable(twl->dev);
+
 	/* autogate 60MHz ULPI clock,
 	 * clear dpll clock request for i2c access,
 	 * disable 32KHz
@@ -771,11 +780,6 @@ static int twl4030_usb_remove(struct platform_device *pdev)
 	/* disable complete OTG block */
 	twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
 
-	if (cable_present(twl->linkstat))
-		pm_runtime_put_noidle(twl->dev);
-	pm_runtime_mark_last_busy(twl->dev);
-	pm_runtime_put(twl->dev);
-
 	return 0;
 }