Orion: orion -> orion5x rename

Do a global s/orion/orion5x/ of the Orion 5x-specific bits (i.e.
not the plat-orion bits.)
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Reviewed-by: Tzachi Perelstein <tzachi@marvell.com>
Acked-by: Saeed Bishara <saeed@marvell.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

arch/arm/Kconfig

@@ -377,7 +377,7 @@ config ARCH_MXC
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
-config ARCH_ORION
+config ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU
 	select PCI
@@ -386,7 +386,8 @@ config ARCH_ORION
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
 	help
-	  Support for Marvell Orion System on Chip family.
+	  Support for the following Marvell Orion 5x series SoCs:
+	  Orion-1 (5181), Orion-NAS (5182), Orion-2 (5281.)
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
@@ -517,7 +518,7 @@ source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
 
-source "arch/arm/mach-orion/Kconfig"
+source "arch/arm/mach-orion5x/Kconfig"
 
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"

arch/arm/Makefile

@@ -139,7 +139,7 @@ endif
  machine-$(CONFIG_ARCH_KS8695)     := ks8695
   incdir-$(CONFIG_ARCH_MXC)	   := mxc
  machine-$(CONFIG_ARCH_MX3)	   := mx3
- machine-$(CONFIG_ARCH_ORION)	   := orion
+ machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
  machine-$(CONFIG_ARCH_MSM7X00A)   := msm
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)

arch/arm/configs/orion_defconfig → arch/arm/configs/orion5x_defconfig

@@ -140,7 +140,7 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_MXC is not set
-CONFIG_ARCH_ORION=y
+CONFIG_ARCH_ORION5X=y
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set

arch/arm/mach-orion/Kconfig → arch/arm/mach-orion5x/Kconfig

-if ARCH_ORION
+if ARCH_ORION5X
 
 menu "Orion Implementations"
 

arch/arm/mach-orion/addr-map.c → arch/arm/mach-orion5x/addr-map.c

 /*
- * arch/arm/mach-orion/addr-map.c
+ * arch/arm/mach-orion5x/addr-map.c
  *
- * Address map functions for Marvell Orion System On Chip
+ * Address map functions for Marvell Orion 5x SoCs
  *
  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
  *
@@ -29,7 +29,7 @@
  * Setup access to PCI and PCI-E IO/MEM space is issued by this file.
  * Setup access to various devices located on the device bus interface (e.g.
  * flashes, RTC, etc) should be issued by machine-setup.c according to
- * specific board population (by using orion_setup_*_win()).
+ * specific board population (by using orion5x_setup_*_win()).
  *
  * Non-CPU Masters address decoding --
  * Unlike the CPU, we setup the access from Orion's master interfaces to DDR
@@ -66,8 +66,8 @@
 /*
  * Helpers to get DDR bank info
  */
-#define DDR_BASE_CS(n)		ORION_DDR_REG(0x1500 + ((n) * 8))
-#define DDR_SIZE_CS(n)		ORION_DDR_REG(0x1504 + ((n) * 8))
+#define DDR_BASE_CS(n)		ORION5X_DDR_REG(0x1500 + ((n) * 8))
+#define DDR_SIZE_CS(n)		ORION5X_DDR_REG(0x1504 + ((n) * 8))
 #define DDR_MAX_CS		4
 #define DDR_REG_TO_SIZE(reg)	(((reg) | 0xffffff) + 1)
 #define DDR_REG_TO_BASE(reg)	((reg) & 0xff000000)
@@ -76,30 +76,30 @@
 /*
  * CPU Address Decode Windows registers
  */
-#define CPU_WIN_CTRL(n)		ORION_BRIDGE_REG(0x000 | ((n) << 4))
-#define CPU_WIN_BASE(n)		ORION_BRIDGE_REG(0x004 | ((n) << 4))
-#define CPU_WIN_REMAP_LO(n)	ORION_BRIDGE_REG(0x008 | ((n) << 4))
-#define CPU_WIN_REMAP_HI(n)	ORION_BRIDGE_REG(0x00c | ((n) << 4))
+#define CPU_WIN_CTRL(n)		ORION5X_BRIDGE_REG(0x000 | ((n) << 4))
+#define CPU_WIN_BASE(n)		ORION5X_BRIDGE_REG(0x004 | ((n) << 4))
+#define CPU_WIN_REMAP_LO(n)	ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
+#define CPU_WIN_REMAP_HI(n)	ORION5X_BRIDGE_REG(0x00c | ((n) << 4))
 
 /*
  * Gigabit Ethernet Address Decode Windows registers
  */
-#define ETH_WIN_BASE(win)	ORION_ETH_REG(0x200 + ((win) * 8))
-#define ETH_WIN_SIZE(win)	ORION_ETH_REG(0x204 + ((win) * 8))
-#define ETH_WIN_REMAP(win)	ORION_ETH_REG(0x280 + ((win) * 4))
-#define ETH_WIN_EN		ORION_ETH_REG(0x290)
-#define ETH_WIN_PROT		ORION_ETH_REG(0x294)
+#define ETH_WIN_BASE(win)	ORION5X_ETH_REG(0x200 + ((win) * 8))
+#define ETH_WIN_SIZE(win)	ORION5X_ETH_REG(0x204 + ((win) * 8))
+#define ETH_WIN_REMAP(win)	ORION5X_ETH_REG(0x280 + ((win) * 4))
+#define ETH_WIN_EN		ORION5X_ETH_REG(0x290)
+#define ETH_WIN_PROT		ORION5X_ETH_REG(0x294)
 #define ETH_MAX_WIN		6
 #define ETH_MAX_REMAP_WIN	4
 
 
-struct mbus_dram_target_info orion_mbus_dram_info;
+struct mbus_dram_target_info orion5x_mbus_dram_info;
 
-static int __init orion_cpu_win_can_remap(int win)
+static int __init orion5x_cpu_win_can_remap(int win)
 {
 	u32 dev, rev;
 
-	orion_pcie_id(&dev, &rev);
+	orion5x_pcie_id(&dev, &rev);
 	if ((dev == MV88F5281_DEV_ID && win < 4)
 	    || (dev == MV88F5182_DEV_ID && win < 2)
 	    || (dev == MV88F5181_DEV_ID && win < 2))
@@ -111,20 +111,20 @@ static int __init orion_cpu_win_can_remap(int win)
 static void __init setup_cpu_win(int win, u32 base, u32 size,
 				 u8 target, u8 attr, int remap)
 {
-	orion_write(CPU_WIN_BASE(win), base & 0xffff0000);
-	orion_write(CPU_WIN_CTRL(win),
+	orion5x_write(CPU_WIN_BASE(win), base & 0xffff0000);
+	orion5x_write(CPU_WIN_CTRL(win),
 		((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1);
 
-	if (orion_cpu_win_can_remap(win)) {
+	if (orion5x_cpu_win_can_remap(win)) {
 		if (remap < 0)
 			remap = base;
 
-		orion_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000);
-		orion_write(CPU_WIN_REMAP_HI(win), 0);
+		orion5x_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000);
+		orion5x_write(CPU_WIN_REMAP_HI(win), 0);
 	}
 }
 
-void __init orion_setup_cpu_mbus_bridge(void)
+void __init orion5x_setup_cpu_mbus_bridge(void)
 {
 	int i;
 	int cs;
@@ -133,30 +133,30 @@ void __init orion_setup_cpu_mbus_bridge(void)
 	 * First, disable and clear windows.
 	 */
 	for (i = 0; i < 8; i++) {
-		orion_write(CPU_WIN_BASE(i), 0);
-		orion_write(CPU_WIN_CTRL(i), 0);
-		if (orion_cpu_win_can_remap(i)) {
-			orion_write(CPU_WIN_REMAP_LO(i), 0);
-			orion_write(CPU_WIN_REMAP_HI(i), 0);
+		orion5x_write(CPU_WIN_BASE(i), 0);
+		orion5x_write(CPU_WIN_CTRL(i), 0);
+		if (orion5x_cpu_win_can_remap(i)) {
+			orion5x_write(CPU_WIN_REMAP_LO(i), 0);
+			orion5x_write(CPU_WIN_REMAP_HI(i), 0);
 		}
 	}
 
 	/*
 	 * Setup windows for PCI+PCIe IO+MEM space.
 	 */
-	setup_cpu_win(0, ORION_PCIE_IO_PHYS_BASE, ORION_PCIE_IO_SIZE,
-		TARGET_PCIE, ATTR_PCIE_IO, ORION_PCIE_IO_BUS_BASE);
-	setup_cpu_win(1, ORION_PCI_IO_PHYS_BASE, ORION_PCI_IO_SIZE,
-		TARGET_PCI, ATTR_PCI_IO, ORION_PCI_IO_BUS_BASE);
-	setup_cpu_win(2, ORION_PCIE_MEM_PHYS_BASE, ORION_PCIE_MEM_SIZE,
+	setup_cpu_win(0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE,
+		TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE);
+	setup_cpu_win(1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE,
+		TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE);
+	setup_cpu_win(2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE,
 		TARGET_PCIE, ATTR_PCIE_MEM, -1);
-	setup_cpu_win(3, ORION_PCI_MEM_PHYS_BASE, ORION_PCI_MEM_SIZE,
+	setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
 		TARGET_PCI, ATTR_PCI_MEM, -1);
 
 	/*
 	 * Setup MBUS dram target info.
 	 */
-	orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+	orion5x_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
 
 	for (i = 0, cs = 0; i < 4; i++) {
 		u32 base = readl(DDR_BASE_CS(i));
@@ -168,42 +168,42 @@ void __init orion_setup_cpu_mbus_bridge(void)
 		if (size & 1) {
 			struct mbus_dram_window *w;
 
-			w = &orion_mbus_dram_info.cs[cs++];
+			w = &orion5x_mbus_dram_info.cs[cs++];
 			w->cs_index = i;
 			w->mbus_attr = 0xf & ~(1 << i);
 			w->base = base & 0xff000000;
 			w->size = (size | 0x00ffffff) + 1;
 		}
 	}
-	orion_mbus_dram_info.num_cs = cs;
+	orion5x_mbus_dram_info.num_cs = cs;
 }
 
-void __init orion_setup_dev_boot_win(u32 base, u32 size)
+void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
 {
 	setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
 }
 
-void __init orion_setup_dev0_win(u32 base, u32 size)
+void __init orion5x_setup_dev0_win(u32 base, u32 size)
 {
 	setup_cpu_win(5, base, size, TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
 }
 
-void __init orion_setup_dev1_win(u32 base, u32 size)
+void __init orion5x_setup_dev1_win(u32 base, u32 size)
 {
 	setup_cpu_win(6, base, size, TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
 }
 
-void __init orion_setup_dev2_win(u32 base, u32 size)
+void __init orion5x_setup_dev2_win(u32 base, u32 size)
 {
 	setup_cpu_win(7, base, size, TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
 }
 
-void __init orion_setup_pcie_wa_win(u32 base, u32 size)
+void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
 {
 	setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1);
 }
 
-void __init orion_setup_eth_wins(void)
+void __init orion5x_setup_eth_wins(void)
 {
 	int i;
 
@@ -211,12 +211,12 @@ void __init orion_setup_eth_wins(void)
 	 * First, disable and clear windows
 	 */
 	for (i = 0; i < ETH_MAX_WIN; i++) {
-		orion_write(ETH_WIN_BASE(i), 0);
-		orion_write(ETH_WIN_SIZE(i), 0);
-		orion_setbits(ETH_WIN_EN, 1 << i);
-		orion_clrbits(ETH_WIN_PROT, 0x3 << (i * 2));
+		orion5x_write(ETH_WIN_BASE(i), 0);
+		orion5x_write(ETH_WIN_SIZE(i), 0);
+		orion5x_setbits(ETH_WIN_EN, 1 << i);
+		orion5x_clrbits(ETH_WIN_PROT, 0x3 << (i * 2));
 		if (i < ETH_MAX_REMAP_WIN)
-			orion_write(ETH_WIN_REMAP(i), 0);
+			orion5x_write(ETH_WIN_REMAP(i), 0);
 	}
 
 	/*
@@ -224,17 +224,17 @@ void __init orion_setup_eth_wins(void)
 	 */
 	for (i = 0; i < DDR_MAX_CS; i++) {
 		u32 base, size;
-		size = orion_read(DDR_SIZE_CS(i));
-		base = orion_read(DDR_BASE_CS(i));
+		size = orion5x_read(DDR_SIZE_CS(i));
+		base = orion5x_read(DDR_BASE_CS(i));
 		if (size & DDR_BANK_EN) {
 			base = DDR_REG_TO_BASE(base);
 			size = DDR_REG_TO_SIZE(size);
-			orion_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000);
-			orion_write(ETH_WIN_BASE(i), (base & 0xffff0000) |
+			orion5x_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000);
+			orion5x_write(ETH_WIN_BASE(i), (base & 0xffff0000) |
 					(ATTR_DDR_CS(i) << 8) |
 					TARGET_DDR);
-			orion_clrbits(ETH_WIN_EN, 1 << i);
-			orion_setbits(ETH_WIN_PROT, 0x3 << (i * 2));
+			orion5x_clrbits(ETH_WIN_EN, 1 << i);
+			orion5x_setbits(ETH_WIN_PROT, 0x3 << (i * 2));
 		}
 	}
 }

arch/arm/mach-orion/common.h → arch/arm/mach-orion5x/common.h

-#ifndef __ARCH_ORION_COMMON_H
-#define __ARCH_ORION_COMMON_H
+#ifndef __ARCH_ORION5X_COMMON_H
+#define __ARCH_ORION5X_COMMON_H
 
 /*
  * Basic Orion init functions used early by machine-setup.
  */
 
-void orion_map_io(void);
-void orion_init_irq(void);
-void orion_init(void);
-extern struct sys_timer orion_timer;
+void orion5x_map_io(void);
+void orion5x_init_irq(void);
+void orion5x_init(void);
+extern struct sys_timer orion5x_timer;
 
 /*
  * Enumerations and functions for Orion windows mapping. Used by Orion core
  * functions to map its interfaces and by the machine-setup to map its on-
  * board devices. Details in /mach-orion/addr-map.c
  */
-extern struct mbus_dram_target_info orion_mbus_dram_info;
-void orion_setup_cpu_mbus_bridge(void);
-void orion_setup_dev_boot_win(u32 base, u32 size);
-void orion_setup_dev0_win(u32 base, u32 size);
-void orion_setup_dev1_win(u32 base, u32 size);
-void orion_setup_dev2_win(u32 base, u32 size);
-void orion_setup_pcie_wa_win(u32 base, u32 size);
-void orion_setup_eth_wins(void);
+extern struct mbus_dram_target_info orion5x_mbus_dram_info;
+void orion5x_setup_cpu_mbus_bridge(void);
+void orion5x_setup_dev_boot_win(u32 base, u32 size);
+void orion5x_setup_dev0_win(u32 base, u32 size);
+void orion5x_setup_dev1_win(u32 base, u32 size);
+void orion5x_setup_dev2_win(u32 base, u32 size);
+void orion5x_setup_pcie_wa_win(u32 base, u32 size);
+void orion5x_setup_eth_wins(void);
 
 /*
  * Shared code used internally by other Orion core functions.
@@ -32,18 +32,18 @@ void orion_setup_eth_wins(void);
 struct pci_sys_data;
 struct pci_bus;
 
-void orion_pcie_id(u32 *dev, u32 *rev);
-int orion_pcie_local_bus_nr(void);
-int orion_pci_local_bus_nr(void);
-int orion_pci_sys_setup(int nr, struct pci_sys_data *sys);
-struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
+void orion5x_pcie_id(u32 *dev, u32 *rev);
+int orion5x_pcie_local_bus_nr(void);
+int orion5x_pci_local_bus_nr(void);
+int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
+struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
 
 /*
  * Valid GPIO pins according to MPP setup, used by machine-setup.
  * (/mach-orion/gpio.c).
  */
 
-void orion_gpio_set_valid_pins(u32 pins);
+void orion5x_gpio_set_valid_pins(u32 pins);
 void gpio_display(void);	/* debug */
 
 /*
@@ -52,7 +52,7 @@ void gpio_display(void);	/* debug */
 
 struct mv643xx_eth_platform_data;
 
-void orion_eth_init(struct mv643xx_eth_platform_data *eth_data);
+void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
 
 /*
  * Orion Sata platform_data, used by machine-setup
@@ -60,7 +60,7 @@ void orion_eth_init(struct mv643xx_eth_platform_data *eth_data);
 
 struct mv_sata_platform_data;
 
-void orion_sata_init(struct mv_sata_platform_data *sata_data);
+void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
 
 struct machine_desc;
 struct meminfo;

arch/arm/mach-orion/db88f5281-setup.c → arch/arm/mach-orion5x/db88f5281-setup.c

 /*
- * arch/arm/mach-orion/db88f5281-setup.c
+ * arch/arm/mach-orion5x/db88f5281-setup.c
  *
  * Marvell Orion-2 Development Board Setup
  *
@@ -24,7 +24,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion.h>
+#include <asm/arch/orion5x.h>
 #include <asm/plat-orion/orion_nand.h>
 #include "common.h"
 
@@ -244,8 +244,8 @@ static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	/*
 	 * PCIE IRQ is connected internally (not GPIO)
 	 */
-	if (dev->bus->number == orion_pcie_local_bus_nr())
-		return IRQ_ORION_PCIE0_INT;
+	if (dev->bus->number == orion5x_pcie_local_bus_nr())
+		return IRQ_ORION5X_PCIE0_INT;
 
 	/*
 	 * PCI IRQs are connected via GPIOs
@@ -265,8 +265,8 @@ static struct hw_pci db88f5281_pci __initdata = {
 	.nr_controllers	= 2,
 	.preinit	= db88f5281_pci_preinit,
 	.swizzle	= pci_std_swizzle,
-	.setup		= orion_pci_sys_setup,
-	.scan		= orion_pci_sys_scan_bus,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= db88f5281_pci_map_irq,
 };
 
@@ -312,16 +312,16 @@ static void __init db88f5281_init(void)
 	/*
 	 * Basic Orion setup. Need to be called early.
 	 */
-	orion_init();
+	orion5x_init();
 
 	/*
 	 * Setup the CPU address decode windows for our on-board devices
 	 */
-	orion_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
+	orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
 				DB88F5281_NOR_BOOT_SIZE);
-	orion_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
-	orion_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
-	orion_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
+	orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
+	orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
+	orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
 
 	/*
 	 * Setup Multiplexing Pins:
@@ -337,25 +337,25 @@ static void __init db88f5281_init(void)
 	 * MPP18: UART1_CTS			MPP19: UART1_RTS
 	 * MPP-DEV: DEV_D[16:31]
 	 */
-	orion_write(MPP_0_7_CTRL, 0x00222203);
-	orion_write(MPP_8_15_CTRL, 0x44000000);
-	orion_write(MPP_16_19_CTRL, 0);
-	orion_write(MPP_DEV_CTRL, 0);
+	orion5x_write(MPP_0_7_CTRL, 0x00222203);
+	orion5x_write(MPP_8_15_CTRL, 0x44000000);
+	orion5x_write(MPP_16_19_CTRL, 0);
+	orion5x_write(MPP_DEV_CTRL, 0);
 
-	orion_gpio_set_valid_pins(0x00003fc3);
+	orion5x_gpio_set_valid_pins(0x00003fc3);
 
 	platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs));
 	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
-	orion_eth_init(&db88f5281_eth_data);
+	orion5x_eth_init(&db88f5281_eth_data);
 }
 
 MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
 	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
-	.phys_io	= ORION_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= db88f5281_init,
-	.map_io		= orion_map_io,
-	.init_irq	= orion_init_irq,
-	.timer		= &orion_timer,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
 MACHINE_END

arch/arm/mach-orion/dns323-setup.c → arch/arm/mach-orion5x/dns323-setup.c

 /*
- * arch/arm/mach-orion/dns323-setup.c
+ * arch/arm/mach-orion5x/dns323-setup.c
  *
  * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
  *
@@ -25,7 +25,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion.h>
+#include <asm/arch/orion5x.h>
 #include "common.h"
 
 #define DNS323_GPIO_LED_RIGHT_AMBER	1
@@ -44,8 +44,8 @@
 static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	/* PCI-E */
-	if (dev->bus->number == orion_pcie_local_bus_nr())
-		return IRQ_ORION_PCIE0_INT;
+	if (dev->bus->number == orion5x_pcie_local_bus_nr())
+		return IRQ_ORION5X_PCIE0_INT;
 
 	pr_err("%s: requested mapping for unknown bus\n", __func__);
 
@@ -55,8 +55,8 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 static struct hw_pci dns323_pci __initdata = {
 	.nr_controllers = 1,
 	.swizzle	= pci_std_swizzle,
-	.setup		= orion_pci_sys_setup,
-	.scan		= orion_pci_sys_scan_bus,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= dns323_pci_map_irq,
 };
 
@@ -246,24 +246,25 @@ static void dns323_power_off(void)
 static void __init dns323_init(void)
 {
 	/* Setup basic Orion functions. Need to be called early. */
-	orion_init();
+	orion5x_init();
 
 	/* setup flash mapping
 	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
 	 */
-	orion_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
+	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
 
 	/* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIE
 	 *
 	 * Open a special address decode windows for the PCIE WA.
 	 */
-	orion_setup_pcie_wa_win(ORION_PCIE_WA_PHYS_BASE, ORION_PCIE_WA_SIZE);
+	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+				ORION5X_PCIE_WA_SIZE);
 
 	/* set MPP to 0 as D-Link's 2.6.12.6 kernel did */
-	orion_write(MPP_0_7_CTRL, 0);
-	orion_write(MPP_8_15_CTRL, 0);
-	orion_write(MPP_16_19_CTRL, 0);
-	orion_write(MPP_DEV_CTRL, 0);
+	orion5x_write(MPP_0_7_CTRL, 0);
+	orion5x_write(MPP_8_15_CTRL, 0);
+	orion5x_write(MPP_16_19_CTRL, 0);
+	orion5x_write(MPP_DEV_CTRL, 0);
 
 	/* Define used GPIO pins
 
@@ -286,7 +287,7 @@ static void __init dns323_init(void)
 	  | 14 | Out | //unknown//
 	  | 15 | Out | //unknown//
 	*/
-	orion_gpio_set_valid_pins(0x07f6);
+	orion5x_gpio_set_valid_pins(0x07f6);
 
 	/* register dns323 specific power-off method */
 	if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0)
@@ -302,18 +303,18 @@ static void __init dns323_init(void)
 	i2c_register_board_info(0, dns323_i2c_devices,
 				ARRAY_SIZE(dns323_i2c_devices));
 
-	orion_eth_init(&dns323_eth_data);
+	orion5x_eth_init(&dns323_eth_data);
 }
 
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
 MACHINE_START(DNS323, "D-Link DNS-323")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.phys_io	= ORION_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= dns323_init,
-	.map_io		= orion_map_io,
-	.init_irq	= orion_init_irq,
-	.timer		= &orion_timer,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
 MACHINE_END

arch/arm/mach-orion/gpio.c → arch/arm/mach-orion5x/gpio.c

 /*
- * arch/arm/mach-orion/gpio.c
+ * arch/arm/mach-orion5x/gpio.c
  *
  * GPIO functions for Marvell Orion System On Chip
  *
@@ -17,14 +17,14 @@
 #include <linux/bitops.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
-#include <asm/arch/orion.h>
+#include <asm/arch/orion5x.h>
 #include "common.h"
 
 static DEFINE_SPINLOCK(gpio_lock);
 static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)];
 static const char *gpio_label[GPIO_MAX];  /* non null for allocated GPIOs */
 
-void __init orion_gpio_set_valid_pins(u32 pins)
+void __init orion5x_gpio_set_valid_pins(u32 pins)
 {
 	gpio_valid[0] = pins;
 }
@@ -50,7 +50,7 @@ int gpio_direction_input(unsigned pin)
 	if (!gpio_label[pin])
 		gpio_label[pin] = "?";
 
-	orion_setbits(GPIO_IO_CONF, 1 << pin);
+	orion5x_setbits(GPIO_IO_CONF, 1 << pin);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 	return 0;
@@ -77,12 +77,12 @@ int gpio_direction_output(unsigned pin, int value)
 		gpio_label[pin] = "?";
 
 	mask = 1 << pin;
-	orion_clrbits(GPIO_BLINK_EN, mask);
+	orion5x_clrbits(GPIO_BLINK_EN, mask);
 	if (value)
-		orion_setbits(GPIO_OUT, mask);
+		orion5x_setbits(GPIO_OUT, mask);
 	else
-		orion_clrbits(GPIO_OUT, mask);
-	orion_clrbits(GPIO_IO_CONF, mask);
+		orion5x_clrbits(GPIO_OUT, mask);
+	orion5x_clrbits(GPIO_IO_CONF, mask);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 	return 0;
@@ -93,10 +93,10 @@ int gpio_get_value(unsigned pin)
 {
 	int val, mask = 1 << pin;
 
-	if (orion_read(GPIO_IO_CONF) & mask)
-		val = orion_read(GPIO_DATA_IN) ^ orion_read(GPIO_IN_POL);
+	if (orion5x_read(GPIO_IO_CONF) & mask)
+		val = orion5x_read(GPIO_DATA_IN) ^ orion5x_read(GPIO_IN_POL);
 	else
-		val = orion_read(GPIO_OUT);
+		val = orion5x_read(GPIO_OUT);
 
 	return val & mask;
 }
@@ -109,32 +109,32 @@ void gpio_set_value(unsigned pin, int value)
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	orion_clrbits(GPIO_BLINK_EN, mask);
+	orion5x_clrbits(GPIO_BLINK_EN, mask);
 	if (value)
-		orion_setbits(GPIO_OUT, mask);
+		orion5x_setbits(GPIO_OUT, mask);
 	else
-		orion_clrbits(GPIO_OUT, mask);
+		orion5x_clrbits(GPIO_OUT, mask);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 }
 EXPORT_SYMBOL(gpio_set_value);
 
-void orion_gpio_set_blink(unsigned pin, int blink)
+void orion5x_gpio_set_blink(unsigned pin, int blink)
 {
 	unsigned long flags;
 	int mask = 1 << pin;
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	orion_clrbits(GPIO_OUT, mask);
+	orion5x_clrbits(GPIO_OUT, mask);
 	if (blink)
-		orion_setbits(GPIO_BLINK_EN, mask);
+		orion5x_setbits(GPIO_BLINK_EN, mask);
 	else
-		orion_clrbits(GPIO_BLINK_EN, mask);
+		orion5x_clrbits(GPIO_BLINK_EN, mask);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 }
-EXPORT_SYMBOL(orion_gpio_set_blink);
+EXPORT_SYMBOL(orion5x_gpio_set_blink);
 
 int gpio_request(unsigned pin, const char *label)
 {
@@ -188,39 +188,39 @@ void gpio_display(void)
 			printk("GPIO, free\n");
 		} else {
 			printk("GPIO, used by %s, ", gpio_label[i]);
-			if (orion_read(GPIO_IO_CONF) & (1 << i)) {
+			if (orion5x_read(GPIO_IO_CONF) & (1 << i)) {
 				printk("input, active %s, level %s, edge %s\n",
-				((orion_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
-				((orion_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
-				((orion_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
+				((orion5x_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
+				((orion5x_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
+				((orion5x_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
 			} else {
-				printk("output, val=%d\n", (orion_read(GPIO_OUT) >> i) & 1);
+				printk("output, val=%d\n", (orion5x_read(GPIO_OUT) >> i) & 1);
 			}
 		}
 	}
 
 	printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n",
-				MPP_0_7_CTRL, orion_read(MPP_0_7_CTRL));
+				MPP_0_7_CTRL, orion5x_read(MPP_0_7_CTRL));
 	printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n",
-				MPP_8_15_CTRL, orion_read(MPP_8_15_CTRL));
+				MPP_8_15_CTRL, orion5x_read(MPP_8_15_CTRL));
 	printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n",
-				MPP_16_19_CTRL, orion_read(MPP_16_19_CTRL));
+				MPP_16_19_CTRL, orion5x_read(MPP_16_19_CTRL));
 	printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n",
-				MPP_DEV_CTRL, orion_read(MPP_DEV_CTRL));
+				MPP_DEV_CTRL, orion5x_read(MPP_DEV_CTRL));
 	printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n",
-				GPIO_OUT, orion_read(GPIO_OUT));
+				GPIO_OUT, orion5x_read(GPIO_OUT));
 	printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n",
-				GPIO_IO_CONF, orion_read(GPIO_IO_CONF));
+				GPIO_IO_CONF, orion5x_read(GPIO_IO_CONF));
 	printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n",
-				GPIO_BLINK_EN, orion_read(GPIO_BLINK_EN));
+				GPIO_BLINK_EN, orion5x_read(GPIO_BLINK_EN));
 	printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n",
-				GPIO_IN_POL, orion_read(GPIO_IN_POL));
+				GPIO_IN_POL, orion5x_read(GPIO_IN_POL));
 	printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n",
-				GPIO_DATA_IN, orion_read(GPIO_DATA_IN));
+				GPIO_DATA_IN, orion5x_read(GPIO_DATA_IN));
 	printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n",
-				GPIO_LEVEL_MASK, orion_read(GPIO_LEVEL_MASK));
+				GPIO_LEVEL_MASK, orion5x_read(GPIO_LEVEL_MASK));
 	printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n",
-				GPIO_EDGE_CAUSE, orion_read(GPIO_EDGE_CAUSE));
+				GPIO_EDGE_CAUSE, orion5x_read(GPIO_EDGE_CAUSE));
 	printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n",
-				GPIO_EDGE_MASK, orion_read(GPIO_EDGE_MASK));
+				GPIO_EDGE_MASK, orion5x_read(GPIO_EDGE_MASK));
 }

arch/arm/mach-orion/irq.c → arch/arm/mach-orion5x/irq.c

 /*
- * arch/arm/mach-orion/irq.c
+ * arch/arm/mach-orion5x/irq.c
  *
  * Core IRQ functions for Marvell Orion System On Chip
  *
@@ -15,7 +15,7 @@
 #include <linux/irq.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
-#include <asm/arch/orion.h>
+#include <asm/arch/orion5x.h>
 #include <asm/plat-orion/irq.h>
 #include "common.h"
 
@@ -44,46 +44,46 @@
  *        polarity    LEVEL          mask
  *
  ****************************************************************************/
-static void orion_gpio_irq_ack(u32 irq)
+static void orion5x_gpio_irq_ack(u32 irq)
 {
 	int pin = irq_to_gpio(irq);
 	if (irq_desc[irq].status & IRQ_LEVEL)
 		/*
 		 * Mask bit for level interrupt
 		 */
-		orion_clrbits(GPIO_LEVEL_MASK, 1 << pin);
+		orion5x_clrbits(GPIO_LEVEL_MASK, 1 << pin);
 	else
 		/*
 		 * Clear casue bit for egde interrupt
 		 */
-		orion_clrbits(GPIO_EDGE_CAUSE, 1 << pin);
+		orion5x_clrbits(GPIO_EDGE_CAUSE, 1 << pin);
 }
 
-static void orion_gpio_irq_mask(u32 irq)
+static void orion5x_gpio_irq_mask(u32 irq)
 {
 	int pin = irq_to_gpio(irq);
 	if (irq_desc[irq].status & IRQ_LEVEL)
-		orion_clrbits(GPIO_LEVEL_MASK, 1 << pin);
+		orion5x_clrbits(GPIO_LEVEL_MASK, 1 << pin);
 	else
-		orion_clrbits(GPIO_EDGE_MASK, 1 << pin);
+		orion5x_clrbits(GPIO_EDGE_MASK, 1 << pin);
 }
 
-static void orion_gpio_irq_unmask(u32 irq)
+static void orion5x_gpio_irq_unmask(u32 irq)
 {
 	int pin = irq_to_gpio(irq);
 	if (irq_desc[irq].status & IRQ_LEVEL)
-		orion_setbits(GPIO_LEVEL_MASK, 1 << pin);
+		orion5x_setbits(GPIO_LEVEL_MASK, 1 << pin);
 	else
-		orion_setbits(GPIO_EDGE_MASK, 1 << pin);
+		orion5x_setbits(GPIO_EDGE_MASK, 1 << pin);
 }
 
-static int orion_gpio_set_irq_type(u32 irq, u32 type)
+static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
 {
 	int pin = irq_to_gpio(irq);
 	struct irq_desc *desc;
 
-	if ((orion_read(GPIO_IO_CONF) & (1 << pin)) == 0) {
-		printk(KERN_ERR "orion_gpio_set_irq_type failed "
+	if ((orion5x_read(GPIO_IO_CONF) & (1 << pin)) == 0) {
+		printk(KERN_ERR "orion5x_gpio_set_irq_type failed "
 				"(irq %d, pin %d).\n", irq, pin);
 		return -EINVAL;
 	}
@@ -94,22 +94,22 @@ static int orion_gpio_set_irq_type(u32 irq, u32 type)
 	case IRQT_HIGH:
 		desc->handle_irq = handle_level_irq;
 		desc->status |= IRQ_LEVEL;
-		orion_clrbits(GPIO_IN_POL, (1 << pin));
+		orion5x_clrbits(GPIO_IN_POL, (1 << pin));
 		break;
 	case IRQT_LOW:
 		desc->handle_irq = handle_level_irq;
 		desc->status |= IRQ_LEVEL;
-		orion_setbits(GPIO_IN_POL, (1 << pin));
+		orion5x_setbits(GPIO_IN_POL, (1 << pin));
 		break;
 	case IRQT_RISING:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
-		orion_clrbits(GPIO_IN_POL, (1 << pin));
+		orion5x_clrbits(GPIO_IN_POL, (1 << pin));
 		break;
 	case IRQT_FALLING:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
-		orion_setbits(GPIO_IN_POL, (1 << pin));
+		orion5x_setbits(GPIO_IN_POL, (1 << pin));
 		break;
 	case IRQT_BOTHEDGE:
 		desc->handle_irq = handle_edge_irq;
@@ -117,11 +117,11 @@ static int orion_gpio_set_irq_type(u32 irq, u32 type)
 		/*
 		 * set initial polarity based on current input level
 		 */
-		if ((orion_read(GPIO_IN_POL) ^ orion_read(GPIO_DATA_IN))
+		if ((orion5x_read(GPIO_IN_POL) ^ orion5x_read(GPIO_DATA_IN))
 		    & (1 << pin))
-			orion_setbits(GPIO_IN_POL, (1 << pin)); /* falling */
+			orion5x_setbits(GPIO_IN_POL, (1 << pin)); /* falling */
 		else
-			orion_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */
+			orion5x_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */
 
 		break;
 	default:
@@ -135,22 +135,22 @@ static int orion_gpio_set_irq_type(u32 irq, u32 type)
 	return 0;
 }
 
-static struct irq_chip orion_gpio_irq_chip = {
+static struct irq_chip orion5x_gpio_irq_chip = {
 	.name		= "Orion-IRQ-GPIO",
-	.ack		= orion_gpio_irq_ack,
-	.mask		= orion_gpio_irq_mask,
-	.unmask		= orion_gpio_irq_unmask,
-	.set_type	= orion_gpio_set_irq_type,
+	.ack		= orion5x_gpio_irq_ack,
+	.mask		= orion5x_gpio_irq_mask,
+	.unmask		= orion5x_gpio_irq_unmask,
+	.set_type	= orion5x_gpio_set_irq_type,
 };
 
-static void orion_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	u32 cause, offs, pin;
 
-	BUG_ON(irq < IRQ_ORION_GPIO_0_7 || irq > IRQ_ORION_GPIO_24_31);
-	offs = (irq - IRQ_ORION_GPIO_0_7) * 8;
-	cause = (orion_read(GPIO_DATA_IN) & orion_read(GPIO_LEVEL_MASK)) |
-		(orion_read(GPIO_EDGE_CAUSE) & orion_read(GPIO_EDGE_MASK));
+	BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31);
+	offs = (irq - IRQ_ORION5X_GPIO_0_7) * 8;
+	cause = (orion5x_read(GPIO_DATA_IN) & orion5x_read(GPIO_LEVEL_MASK)) |
+		(orion5x_read(GPIO_EDGE_CAUSE) & orion5x_read(GPIO_EDGE_MASK));
 
 	for (pin = offs; pin < offs + 8; pin++) {
 		if (cause & (1 << pin)) {
@@ -158,16 +158,16 @@ static void orion_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 			desc = irq_desc + irq;
 			if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
 				/* Swap polarity (race with GPIO line) */
-				u32 polarity = orion_read(GPIO_IN_POL);
+				u32 polarity = orion5x_read(GPIO_IN_POL);
 				polarity ^= 1 << pin;
-				orion_write(GPIO_IN_POL, polarity);
+				orion5x_write(GPIO_IN_POL, polarity);
 			}
 			desc_handle_irq(irq, desc);
 		}
 	}
 }
 
-static void __init orion_init_gpio_irq(void)
+static void __init orion5x_init_gpio_irq(void)
 {
 	int i;
 	struct irq_desc *desc;
@@ -175,37 +175,37 @@ static void __init orion_init_gpio_irq(void)
 	/*
 	 * Mask and clear GPIO IRQ interrupts
 	 */
-	orion_write(GPIO_LEVEL_MASK, 0x0);
-	orion_write(GPIO_EDGE_MASK, 0x0);
-	orion_write(GPIO_EDGE_CAUSE, 0x0);
+	orion5x_write(GPIO_LEVEL_MASK, 0x0);
+	orion5x_write(GPIO_EDGE_MASK, 0x0);
+	orion5x_write(GPIO_EDGE_CAUSE, 0x0);
 
 	/*
 	 * Register chained level handlers for GPIO IRQs by default.
 	 * User can use set_type() if he wants to use edge types handlers.
 	 */
-	for (i = IRQ_ORION_GPIO_START; i < NR_IRQS; i++) {
-		set_irq_chip(i, &orion_gpio_irq_chip);
+	for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) {
+		set_irq_chip(i, &orion5x_gpio_irq_chip);
 		set_irq_handler(i, handle_level_irq);
 		desc = irq_desc + i;
 		desc->status |= IRQ_LEVEL;
 		set_irq_flags(i, IRQF_VALID);
 	}
-	set_irq_chained_handler(IRQ_ORION_GPIO_0_7, orion_gpio_irq_handler);
-	set_irq_chained_handler(IRQ_ORION_GPIO_8_15, orion_gpio_irq_handler);
-	set_irq_chained_handler(IRQ_ORION_GPIO_16_23, orion_gpio_irq_handler);
-	set_irq_chained_handler(IRQ_ORION_GPIO_24_31, orion_gpio_irq_handler);
+	set_irq_chained_handler(IRQ_ORION5X_GPIO_0_7, orion5x_gpio_irq_handler);
+	set_irq_chained_handler(IRQ_ORION5X_GPIO_8_15, orion5x_gpio_irq_handler);
+	set_irq_chained_handler(IRQ_ORION5X_GPIO_16_23, orion5x_gpio_irq_handler);
+	set_irq_chained_handler(IRQ_ORION5X_GPIO_24_31, orion5x_gpio_irq_handler);
 }
 
 /*****************************************************************************
  * Orion Main IRQ
  ****************************************************************************/
-static void __init orion_init_main_irq(void)
+static void __init orion5x_init_main_irq(void)
 {
 	orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK);
 }
 
-void __init orion_init_irq(void)
+void __init orion5x_init_irq(void)
 {
-	orion_init_main_irq();
-	orion_init_gpio_irq();
+	orion5x_init_main_irq();
+	orion5x_init_gpio_irq();
 }

arch/arm/mach-orion/kurobox_pro-setup.c → arch/arm/mach-orion5x/kurobox_pro-setup.c

 /*
- * arch/arm/mach-orion/kurobox_pro-setup.c
+ * arch/arm/mach-orion5x/kurobox_pro-setup.c
  *
  * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
  *
@@ -22,7 +22,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion.h>
+#include <asm/arch/orion5x.h>
 #include <asm/plat-orion/orion_nand.h>
 #include "common.h"
 
@@ -123,8 +123,8 @@ static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	/*
 	 * PCI isn't used on the Kuro
 	 */
-	if (dev->bus->number == orion_pcie_local_bus_nr())
-		return IRQ_ORION_PCIE0_INT;
+	if (dev->bus->number == orion5x_pcie_local_bus_nr())
+		return IRQ_ORION5X_PCIE0_INT;
 	else
 		printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
 
@@ -134,8 +134,8 @@ static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 static struct hw_pci kurobox_pro_pci __initdata = {
 	.nr_controllers	= 1,
 	.swizzle	= pci_std_swizzle,
-	.setup		= orion_pci_sys_setup,
-	.scan		= orion_pci_sys_scan_bus,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= kurobox_pro_pci_map_irq,
 };
 
@@ -188,19 +188,20 @@ static void __init kurobox_pro_init(void)
 	/*
 	 * Setup basic Orion functions. Need to be called early.
 	 */
-	orion_init();
+	orion5x_init();
 
 	/*
 	 * Setup the CPU address decode windows for our devices
 	 */
-	orion_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
+	orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
 				KUROBOX_PRO_NOR_BOOT_SIZE);
-	orion_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE);
+	orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE);
 
 	/*
 	 * Open a special address decode windows for the PCIE WA.
 	 */
-	orion_setup_pcie_wa_win(ORION_PCIE_WA_PHYS_BASE, ORION_PCIE_WA_SIZE);
+	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+				ORION5X_PCIE_WA_SIZE);
 
 	/*
 	 * Setup Multiplexing Pins --
@@ -217,26 +218,26 @@ static void __init kurobox_pro_init(void)
 	 * MPP[15] SATA 1 active indication
 	 * MPP[16-19] Not used
 	 */
-	orion_write(MPP_0_7_CTRL, 0x44220003);
-	orion_write(MPP_8_15_CTRL, 0x55550000);
-	orion_write(MPP_16_19_CTRL, 0x0);
+	orion5x_write(MPP_0_7_CTRL, 0x44220003);
+	orion5x_write(MPP_8_15_CTRL, 0x55550000);
+	orion5x_write(MPP_16_19_CTRL, 0x0);
 
-	orion_gpio_set_valid_pins(0x0000000c);
+	orion5x_gpio_set_valid_pins(0x0000000c);
 
 	platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices));
 	i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
-	orion_eth_init(&kurobox_pro_eth_data);
-	orion_sata_init(&kurobox_pro_sata_data);
+	orion5x_eth_init(&kurobox_pro_eth_data);
+	orion5x_sata_init(&kurobox_pro_sata_data);
 }
 
 MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.phys_io	= ORION_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= kurobox_pro_init,
-	.map_io		= orion_map_io,
-	.init_irq	= orion_init_irq,
-	.timer		= &orion_timer,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
 MACHINE_END

arch/arm/mach-orion/rd88f5182-setup.c → arch/arm/mach-orion5x/rd88f5182-setup.c

 /*
- * arch/arm/mach-orion/rd88f5182-setup.c
+ * arch/arm/mach-orion5x/rd88f5182-setup.c
  *
  * Marvell Orion-NAS Reference Design Setup
  *
@@ -24,7 +24,7 @@
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion.h>
+#include <asm/arch/orion5x.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -175,8 +175,8 @@ static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	/*
 	 * PCI-E isn't used on the RD2
 	 */
-	if (dev->bus->number == orion_pcie_local_bus_nr())
-		return IRQ_ORION_PCIE0_INT;
+	if (dev->bus->number == orion5x_pcie_local_bus_nr())
+		return IRQ_ORION5X_PCIE0_INT;
 
 	/*
 	 * PCI IRQs are connected via GPIOs
@@ -196,8 +196,8 @@ static struct hw_pci rd88f5182_pci __initdata = {
 	.nr_controllers	= 2,
 	.preinit	= rd88f5182_pci_preinit,
 	.swizzle	= pci_std_swizzle,
-	.setup		= orion_pci_sys_setup,
-	.scan		= orion_pci_sys_scan_bus,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= rd88f5182_pci_map_irq,
 };
 
@@ -249,19 +249,20 @@ static void __init rd88f5182_init(void)
 	/*
 	 * Setup basic Orion functions. Need to be called early.
 	 */
-	orion_init();
+	orion5x_init();
 
 	/*
 	 * Setup the CPU address decode windows for our devices
 	 */
-	orion_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
+	orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
 				RD88F5182_NOR_BOOT_SIZE);
-	orion_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
+	orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
 
 	/*
 	 * Open a special address decode windows for the PCIE WA.
 	 */
-	orion_setup_pcie_wa_win(ORION_PCIE_WA_PHYS_BASE, ORION_PCIE_WA_SIZE);
+	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+				ORION5X_PCIE_WA_SIZE);
 
 	/*
 	 * Setup Multiplexing Pins --
@@ -287,25 +288,25 @@ static void __init rd88f5182_init(void)
 	 * MPP[25] USB 0 over current enable
 	 */
 
-	orion_write(MPP_0_7_CTRL, 0x00000003);
-	orion_write(MPP_8_15_CTRL, 0x55550000);
-	orion_write(MPP_16_19_CTRL, 0x5555);
+	orion5x_write(MPP_0_7_CTRL, 0x00000003);
+	orion5x_write(MPP_8_15_CTRL, 0x55550000);
+	orion5x_write(MPP_16_19_CTRL, 0x5555);
 
-	orion_gpio_set_valid_pins(0x000000fb);
+	orion5x_gpio_set_valid_pins(0x000000fb);
 
 	platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices));
 	i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
-	orion_eth_init(&rd88f5182_eth_data);
-	orion_sata_init(&rd88f5182_sata_data);
+	orion5x_eth_init(&rd88f5182_eth_data);
+	orion5x_sata_init(&rd88f5182_sata_data);
 }
 
 MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.phys_io	= ORION_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f5182_init,
-	.map_io		= orion_map_io,
-	.init_irq	= orion_init_irq,
-	.timer		= &orion_timer,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
 MACHINE_END

arch/arm/mach-orion/ts209-setup.c → arch/arm/mach-orion5x/ts209-setup.c

@@ -26,7 +26,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion.h>
+#include <asm/arch/orion5x.h>
 #include "common.h"
 
 #define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
@@ -144,8 +144,8 @@ static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	/*
 	 * PCIE IRQ is connected internally (not GPIO)
 	 */
-	if (dev->bus->number == orion_pcie_local_bus_nr())
-		return IRQ_ORION_PCIE0_INT;
+	if (dev->bus->number == orion5x_pcie_local_bus_nr())
+		return IRQ_ORION5X_PCIE0_INT;
 
 	/*
 	 * PCI IRQs are connected via GPIOs
@@ -164,8 +164,8 @@ static struct hw_pci qnap_ts209_pci __initdata = {
 	.nr_controllers = 2,
 	.preinit        = qnap_ts209_pci_preinit,
 	.swizzle        = pci_std_swizzle,
-	.setup          = orion_pci_sys_setup,
-	.scan           = orion_pci_sys_scan_bus,
+	.setup          = orion5x_pci_sys_setup,
+	.scan           = orion5x_pci_sys_scan_bus,
 	.map_irq        = qnap_ts209_pci_map_irq,
 };
 
@@ -261,21 +261,21 @@ static struct platform_device *qnap_ts209_devices[] __initdata = {
 static void qnap_ts209_power_off(void)
 {
 	/* 19200 baud divisor */
-	const unsigned divisor = ((ORION_TCLK + (8 * 19200)) / (16 * 19200));
+	const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
 
 	pr_info("%s: triggering power-off...\n", __func__);
 
 	/* hijack uart1 and reset into sane state (19200,8n1) */
-	orion_write(UART1_REG(LCR), 0x83);
-	orion_write(UART1_REG(DLL), divisor & 0xff);
-	orion_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
-	orion_write(UART1_REG(LCR), 0x03);
-	orion_write(UART1_REG(IER), 0x00);
-	orion_write(UART1_REG(FCR), 0x00);
-	orion_write(UART1_REG(MCR), 0x00);
+	orion5x_write(UART1_REG(LCR), 0x83);
+	orion5x_write(UART1_REG(DLL), divisor & 0xff);
+	orion5x_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
+	orion5x_write(UART1_REG(LCR), 0x03);
+	orion5x_write(UART1_REG(IER), 0x00);
+	orion5x_write(UART1_REG(FCR), 0x00);
+	orion5x_write(UART1_REG(MCR), 0x00);
 
 	/* send the power-off command 'A' to PIC */
-	orion_write(UART1_REG(TX), 'A');
+	orion5x_write(UART1_REG(TX), 'A');
 }
 
 static void __init qnap_ts209_init(void)
@@ -283,18 +283,19 @@ static void __init qnap_ts209_init(void)
 	/*
 	 * Setup basic Orion functions. Need to be called early.
 	 */
-	orion_init();
+	orion5x_init();
 
 	/*
 	 * Setup flash mapping
 	 */
-	orion_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
+	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
 			    QNAP_TS209_NOR_BOOT_SIZE);
 
 	/*
 	 * Open a special address decode windows for the PCIE WA.
 	 */
-	orion_setup_pcie_wa_win(ORION_PCIE_WA_PHYS_BASE, ORION_PCIE_WA_SIZE);
+	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+				ORION5X_PCIE_WA_SIZE);
 
 	/*
 	 * Setup Multiplexing Pins --
@@ -319,10 +320,10 @@ static void __init qnap_ts209_init(void)
 	 * MPP[22] USB 0 over current
 	 * MPP[23-25] Reserved
 	 */
-	orion_write(MPP_0_7_CTRL, 0x3);
-	orion_write(MPP_8_15_CTRL, 0x55550000);
-	orion_write(MPP_16_19_CTRL, 0x5500);
-	orion_gpio_set_valid_pins(0x3cc0fff);
+	orion5x_write(MPP_0_7_CTRL, 0x3);
+	orion5x_write(MPP_8_15_CTRL, 0x55550000);
+	orion5x_write(MPP_16_19_CTRL, 0x5500);
+	orion5x_gpio_set_valid_pins(0x3cc0fff);
 
 	/* register ts209 specific power-off method */
 	pm_power_off = qnap_ts209_power_off;
@@ -341,18 +342,18 @@ static void __init qnap_ts209_init(void)
 		pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
 
-	orion_eth_init(&qnap_ts209_eth_data);
-	orion_sata_init(&qnap_ts209_sata_data);
+	orion5x_eth_init(&qnap_ts209_eth_data);
+	orion5x_sata_init(&qnap_ts209_sata_data);
 }
 
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
 	/* Maintainer:  Byron Bradley <byron.bbradley@gmail.com> */
-	.phys_io	= ORION_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= qnap_ts209_init,
-	.map_io		= orion_map_io,
-	.init_irq	= orion_init_irq,
-	.timer		= &orion_timer,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
 	.fixup		= tag_fixup_mem32,
 MACHINE_END

arch/arm/mm/Kconfig

@@ -345,7 +345,7 @@ config CPU_XSC3
 # Feroceon
 config CPU_FEROCEON
 	bool
-	depends on ARCH_ORION
+	depends on ARCH_ORION5X
 	default y
 	select CPU_32v5
 	select CPU_ABRT_EV5T

include/asm-arm/arch-orion/irqs.h

-/*
- * include/asm-arm/arch-orion/irqs.h
- *
- * IRQ definitions for Orion SoC
- *
- *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- *  This file is licensed under the terms of the GNU General Public
- *  License version 2. This program is licensed "as is" without any
- *  warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "orion.h"	/* need GPIO_MAX */
-
-/*
- * Orion Main Interrupt Controller
- */
-#define IRQ_ORION_BRIDGE	0
-#define IRQ_ORION_DOORBELL_H2C	1
-#define IRQ_ORION_DOORBELL_C2H	2
-#define IRQ_ORION_UART0		3
-#define IRQ_ORION_UART1		4
-#define IRQ_ORION_I2C		5
-#define IRQ_ORION_GPIO_0_7	6
-#define IRQ_ORION_GPIO_8_15	7
-#define IRQ_ORION_GPIO_16_23	8
-#define IRQ_ORION_GPIO_24_31	9
-#define IRQ_ORION_PCIE0_ERR	10
-#define IRQ_ORION_PCIE0_INT	11
-#define IRQ_ORION_USB1_CTRL	12
-#define IRQ_ORION_DEV_BUS_ERR	14
-#define IRQ_ORION_PCI_ERR	15
-#define IRQ_ORION_USB_BR_ERR	16
-#define IRQ_ORION_USB0_CTRL	17
-#define IRQ_ORION_ETH_RX	18
-#define IRQ_ORION_ETH_TX	19
-#define IRQ_ORION_ETH_MISC	20
-#define IRQ_ORION_ETH_SUM	21
-#define IRQ_ORION_ETH_ERR	22
-#define IRQ_ORION_IDMA_ERR	23
-#define IRQ_ORION_IDMA_0	24
-#define IRQ_ORION_IDMA_1	25
-#define IRQ_ORION_IDMA_2	26
-#define IRQ_ORION_IDMA_3	27
-#define IRQ_ORION_CESA		28
-#define IRQ_ORION_SATA		29
-#define IRQ_ORION_XOR0		30
-#define IRQ_ORION_XOR1		31
-
-/*
- * Orion General Purpose Pins
- */
-#define IRQ_ORION_GPIO_START	32
-#define NR_GPIO_IRQS		GPIO_MAX
-
-#define NR_IRQS			(IRQ_ORION_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif

include/asm-arm/arch-orion/debug-macro.S → include/asm-arm/arch-orion5x/debug-macro.S

 /*
- * include/asm-arm/arch-orion/debug-macro.S
+ * include/asm-arm/arch-orion5x/debug-macro.S
  *
  * Debugging macro include header
  *
@@ -8,13 +8,13 @@
  * published by the Free Software Foundation.
 */
 
-#include <asm/arch/orion.h>
+#include <asm/arch/orion5x.h>
 
 	.macro  addruart,rx
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1					@ MMU enabled?
-	ldreq	\rx, =ORION_REGS_PHYS_BASE
-	ldrne	\rx, =ORION_REGS_VIRT_BASE
+	ldreq	\rx, =ORION5X_REGS_PHYS_BASE
+	ldrne	\rx, =ORION5X_REGS_VIRT_BASE
 	orr	\rx, \rx, #0x00012000
 	.endm
 

include/asm-arm/arch-orion/entry-macro.S → include/asm-arm/arch-orion5x/entry-macro.S

 /*
- * include/asm-arm/arch-orion/entry-macro.S
+ * include/asm-arm/arch-orion5x/entry-macro.S
  *
  * Low-level IRQ helper macros for Orion platforms
  *
@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <asm/arch/orion.h>
+#include <asm/arch/orion5x.h>
 
 	.macro  disable_fiq
 	.endm

include/asm-arm/arch-orion/gpio.h → include/asm-arm/arch-orion5x/gpio.h

 /*
- * include/asm-arm/arch-orion/gpio.h
+ * include/asm-arm/arch-orion5x/gpio.h
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -12,17 +12,17 @@ extern int gpio_direction_input(unsigned pin);
 extern int gpio_direction_output(unsigned pin, int value);
 extern int gpio_get_value(unsigned pin);
 extern void gpio_set_value(unsigned pin, int value);
-extern void orion_gpio_set_blink(unsigned pin, int blink);
+extern void orion5x_gpio_set_blink(unsigned pin, int blink);
 extern void gpio_display(void);		/* debug */
 
 static inline int gpio_to_irq(int pin)
 {
-	return pin + IRQ_ORION_GPIO_START;
+	return pin + IRQ_ORION5X_GPIO_START;
 }
 
 static inline int irq_to_gpio(int irq)
 {
-	return irq - IRQ_ORION_GPIO_START;
+	return irq - IRQ_ORION5X_GPIO_START;
 }
 
 #include <asm-generic/gpio.h>		/* cansleep wrappers */

include/asm-arm/arch-orion/hardware.h → include/asm-arm/arch-orion5x/hardware.h

 /*
- * include/asm-arm/arch-orion/hardware.h
+ * include/asm-arm/arch-orion5x/hardware.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -9,13 +9,13 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#include "orion.h"
+#include "orion5x.h"
 
 #define pcibios_assign_all_busses()	1
 
 #define PCIBIOS_MIN_IO		0x00001000
 #define PCIBIOS_MIN_MEM		0x01000000
-#define PCIMEM_BASE		ORION_PCIE_MEM_PHYS_BASE
+#define PCIMEM_BASE		ORION5X_PCIE_MEM_PHYS_BASE
 
 
 #endif

include/asm-arm/arch-orion/io.h → include/asm-arm/arch-orion5x/io.h

 /*
- * include/asm-arm/arch-orion/io.h
+ * include/asm-arm/arch-orion5x/io.h
  *
  * Tzachi Perelstein <tzachi@marvell.com>
  *
@@ -11,20 +11,20 @@
 #ifndef __ASM_ARCH_IO_H
 #define __ASM_ARCH_IO_H
 
-#include "orion.h"
+#include "orion5x.h"
 
 #define IO_SPACE_LIMIT		0xffffffff
-#define IO_SPACE_REMAP		ORION_PCI_SYS_IO_BASE
+#define IO_SPACE_REMAP		ORION5X_PCI_SYS_IO_BASE
 
 static inline void __iomem *
 __arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
 {
 	void __iomem *retval;
 
-	if (mtype == MT_DEVICE && size && paddr >= ORION_REGS_PHYS_BASE &&
-	    paddr + size <= ORION_REGS_PHYS_BASE + ORION_REGS_SIZE) {
-		retval = (void __iomem *)ORION_REGS_VIRT_BASE +
-				(paddr - ORION_REGS_PHYS_BASE);
+	if (mtype == MT_DEVICE && size && paddr >= ORION5X_REGS_PHYS_BASE &&
+	    paddr + size <= ORION5X_REGS_PHYS_BASE + ORION5X_REGS_SIZE) {
+		retval = (void __iomem *)ORION5X_REGS_VIRT_BASE +
+				(paddr - ORION5X_REGS_PHYS_BASE);
 	} else {
 		retval = __arm_ioremap(paddr, size, mtype);
 	}
@@ -35,8 +35,8 @@ __arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
 static inline void
 __arch_iounmap(void __iomem *addr)
 {
-	if (addr < (void __iomem *)ORION_REGS_VIRT_BASE ||
-	    addr >= (void __iomem *)(ORION_REGS_VIRT_BASE + ORION_REGS_SIZE))
+	if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE ||
+	    addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE))
 		__iounmap(addr);
 }
 
@@ -54,15 +54,15 @@ static inline void __iomem *__io(unsigned long addr)
 /*****************************************************************************
  * Helpers to access Orion registers
  ****************************************************************************/
-#define orion_read(r)		__raw_readl(r)
-#define orion_write(r, val)	__raw_writel(val, r)
+#define orion5x_read(r)		__raw_readl(r)
+#define orion5x_write(r, val)	__raw_writel(val, r)
 
 /*
  * These are not preempt-safe.  Locks, if needed, must be taken
  * care of by the caller.
  */
-#define orion_setbits(r, mask)	orion_write((r), orion_read(r) | (mask))
-#define orion_clrbits(r, mask)	orion_write((r), orion_read(r) & ~(mask))
+#define orion5x_setbits(r, mask)	orion5x_write((r), orion5x_read(r) | (mask))
+#define orion5x_clrbits(r, mask)	orion5x_write((r), orion5x_read(r) & ~(mask))
 
 
 #endif

include/asm-arm/arch-orion5x/irqs.h

+/*
+ * include/asm-arm/arch-orion5x/irqs.h
+ *
+ * IRQ definitions for Orion SoC
+ *
+ *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ *  This file is licensed under the terms of the GNU General Public
+ *  License version 2. This program is licensed "as is" without any
+ *  warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "orion5x.h"	/* need GPIO_MAX */
+
+/*
+ * Orion Main Interrupt Controller
+ */
+#define IRQ_ORION5X_BRIDGE		0
+#define IRQ_ORION5X_DOORBELL_H2C	1
+#define IRQ_ORION5X_DOORBELL_C2H	2
+#define IRQ_ORION5X_UART0		3
+#define IRQ_ORION5X_UART1		4
+#define IRQ_ORION5X_I2C			5
+#define IRQ_ORION5X_GPIO_0_7		6
+#define IRQ_ORION5X_GPIO_8_15		7
+#define IRQ_ORION5X_GPIO_16_23		8
+#define IRQ_ORION5X_GPIO_24_31		9
+#define IRQ_ORION5X_PCIE0_ERR		10
+#define IRQ_ORION5X_PCIE0_INT		11
+#define IRQ_ORION5X_USB1_CTRL		12
+#define IRQ_ORION5X_DEV_BUS_ERR		14
+#define IRQ_ORION5X_PCI_ERR		15
+#define IRQ_ORION5X_USB_BR_ERR		16
+#define IRQ_ORION5X_USB0_CTRL		17
+#define IRQ_ORION5X_ETH_RX		18
+#define IRQ_ORION5X_ETH_TX		19
+#define IRQ_ORION5X_ETH_MISC		20
+#define IRQ_ORION5X_ETH_SUM		21
+#define IRQ_ORION5X_ETH_ERR		22
+#define IRQ_ORION5X_IDMA_ERR		23
+#define IRQ_ORION5X_IDMA_0		24
+#define IRQ_ORION5X_IDMA_1		25
+#define IRQ_ORION5X_IDMA_2		26
+#define IRQ_ORION5X_IDMA_3		27
+#define IRQ_ORION5X_CESA		28
+#define IRQ_ORION5X_SATA		29
+#define IRQ_ORION5X_XOR0		30
+#define IRQ_ORION5X_XOR1		31
+
+/*
+ * Orion General Purpose Pins
+ */
+#define IRQ_ORION5X_GPIO_START	32
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif

include/asm-arm/arch-orion/memory.h → include/asm-arm/arch-orion5x/memory.h

 /*
- * include/asm-arm/arch-orion/memory.h
+ * include/asm-arm/arch-orion5x/memory.h
  *
  * Marvell Orion memory definitions
  */

include/asm-arm/arch-orion/orion.h → include/asm-arm/arch-orion5x/orion5x.h

 /*
- * include/asm-arm/arch-orion/orion.h
+ * include/asm-arm/arch-orion5x/orion5x.h
  *
  * Generic definitions of Orion SoC flavors:
  *  Orion-1, Orion-NAS, Orion-VoIP, and Orion-2.
@@ -11,8 +11,8 @@
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __ASM_ARCH_ORION_H
-#define __ASM_ARCH_ORION_H
+#ifndef __ASM_ARCH_ORION5X_H
+#define __ASM_ARCH_ORION5X_H
 
 /*****************************************************************************
  * Orion Address Maps
@@ -35,30 +35,30 @@
  * fdf00000	f2100000	1M	PCI I/O space
  * fe000000	f0000000	16M	PCIe WA space (Orion-1/Orion-NAS only)
  ****************************************************************************/
-#define ORION_REGS_PHYS_BASE	0xf1000000
-#define ORION_REGS_VIRT_BASE	0xfdd00000
-#define ORION_REGS_SIZE		SZ_1M
+#define ORION5X_REGS_PHYS_BASE		0xf1000000
+#define ORION5X_REGS_VIRT_BASE		0xfdd00000
+#define ORION5X_REGS_SIZE		SZ_1M
 
-#define ORION_PCIE_IO_PHYS_BASE	0xf2000000
-#define ORION_PCIE_IO_VIRT_BASE	0xfde00000
-#define ORION_PCIE_IO_BUS_BASE	0x00000000
-#define ORION_PCIE_IO_SIZE	SZ_1M
+#define ORION5X_PCIE_IO_PHYS_BASE	0xf2000000
+#define ORION5X_PCIE_IO_VIRT_BASE	0xfde00000
+#define ORION5X_PCIE_IO_BUS_BASE	0x00000000
+#define ORION5X_PCIE_IO_SIZE		SZ_1M
 
-#define ORION_PCI_IO_PHYS_BASE	0xf2100000
-#define ORION_PCI_IO_VIRT_BASE	0xfdf00000
-#define ORION_PCI_IO_BUS_BASE	0x00100000
-#define ORION_PCI_IO_SIZE	SZ_1M
+#define ORION5X_PCI_IO_PHYS_BASE	0xf2100000
+#define ORION5X_PCI_IO_VIRT_BASE	0xfdf00000
+#define ORION5X_PCI_IO_BUS_BASE		0x00100000
+#define ORION5X_PCI_IO_SIZE		SZ_1M
 
 /* Relevant only for Orion-1/Orion-NAS */
-#define ORION_PCIE_WA_PHYS_BASE	0xf0000000
-#define ORION_PCIE_WA_VIRT_BASE	0xfe000000
-#define ORION_PCIE_WA_SIZE	SZ_16M
+#define ORION5X_PCIE_WA_PHYS_BASE	0xf0000000
+#define ORION5X_PCIE_WA_VIRT_BASE	0xfe000000
+#define ORION5X_PCIE_WA_SIZE		SZ_16M
 
-#define ORION_PCIE_MEM_PHYS_BASE	0xe0000000
-#define ORION_PCIE_MEM_SIZE		SZ_128M
+#define ORION5X_PCIE_MEM_PHYS_BASE	0xe0000000
+#define ORION5X_PCIE_MEM_SIZE		SZ_128M
 
-#define ORION_PCI_MEM_PHYS_BASE		0xe8000000
-#define ORION_PCI_MEM_SIZE		SZ_128M
+#define ORION5X_PCI_MEM_PHYS_BASE	0xe8000000
+#define ORION5X_PCI_MEM_SIZE		SZ_128M
 
 /*******************************************************************************
  * Supported Devices & Revisions
@@ -77,83 +77,83 @@
 /*******************************************************************************
  * Orion Registers Map
  ******************************************************************************/
-#define ORION_DDR_VIRT_BASE		(ORION_REGS_VIRT_BASE | 0x00000)
-#define ORION_DDR_REG(x)		(ORION_DDR_VIRT_BASE | (x))
+#define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x00000)
+#define ORION5X_DDR_REG(x)		(ORION5X_DDR_VIRT_BASE | (x))
 
-#define ORION_DEV_BUS_PHYS_BASE		(ORION_REGS_PHYS_BASE | 0x10000)
-#define ORION_DEV_BUS_VIRT_BASE		(ORION_REGS_VIRT_BASE | 0x10000)
-#define ORION_DEV_BUS_REG(x)		(ORION_DEV_BUS_VIRT_BASE | (x))
-#define  I2C_PHYS_BASE			(ORION_DEV_BUS_PHYS_BASE | 0x1000)
-#define  UART0_PHYS_BASE		(ORION_DEV_BUS_PHYS_BASE | 0x2000)
-#define  UART0_VIRT_BASE		(ORION_DEV_BUS_VIRT_BASE | 0x2000)
-#define  UART1_PHYS_BASE		(ORION_DEV_BUS_PHYS_BASE | 0x2100)
-#define  UART1_VIRT_BASE		(ORION_DEV_BUS_VIRT_BASE | 0x2100)
+#define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x10000)
+#define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x10000)
+#define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE | (x))
+#define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
+#define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
 
-#define ORION_BRIDGE_VIRT_BASE		(ORION_REGS_VIRT_BASE | 0x20000)
-#define ORION_BRIDGE_REG(x)		(ORION_BRIDGE_VIRT_BASE | (x))
-#define  TIMER_VIRT_BASE		(ORION_BRIDGE_VIRT_BASE | 0x300)
+#define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
+#define ORION5X_BRIDGE_REG(x)		(ORION5X_BRIDGE_VIRT_BASE | (x))
+#define  TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
 
-#define ORION_PCI_VIRT_BASE		(ORION_REGS_VIRT_BASE | 0x30000)
-#define ORION_PCI_REG(x)		(ORION_PCI_VIRT_BASE | (x))
+#define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
+#define ORION5X_PCI_REG(x)		(ORION5X_PCI_VIRT_BASE | (x))
 
-#define ORION_PCIE_VIRT_BASE		(ORION_REGS_VIRT_BASE | 0x40000)
-#define ORION_PCIE_REG(x)		(ORION_PCIE_VIRT_BASE | (x))
+#define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x40000)
+#define ORION5X_PCIE_REG(x)		(ORION5X_PCIE_VIRT_BASE | (x))
 
-#define ORION_USB0_PHYS_BASE		(ORION_REGS_PHYS_BASE | 0x50000)
-#define ORION_USB0_VIRT_BASE		(ORION_REGS_VIRT_BASE | 0x50000)
-#define ORION_USB0_REG(x)		(ORION_USB0_VIRT_BASE | (x))
+#define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x50000)
+#define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x50000)
+#define ORION5X_USB0_REG(x)		(ORION5X_USB0_VIRT_BASE | (x))
 
-#define ORION_ETH_PHYS_BASE		(ORION_REGS_PHYS_BASE | 0x70000)
-#define ORION_ETH_VIRT_BASE		(ORION_REGS_VIRT_BASE | 0x70000)
-#define ORION_ETH_REG(x)		(ORION_ETH_VIRT_BASE | (x))
+#define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x70000)
+#define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x70000)
+#define ORION5X_ETH_REG(x)		(ORION5X_ETH_VIRT_BASE | (x))
 
-#define ORION_SATA_PHYS_BASE		(ORION_REGS_PHYS_BASE | 0x80000)
-#define ORION_SATA_VIRT_BASE		(ORION_REGS_VIRT_BASE | 0x80000)
-#define ORION_SATA_REG(x)		(ORION_SATA_VIRT_BASE | (x))
+#define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
+#define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
+#define ORION5X_SATA_REG(x)		(ORION5X_SATA_VIRT_BASE | (x))
 
-#define ORION_USB1_PHYS_BASE		(ORION_REGS_PHYS_BASE | 0xa0000)
-#define ORION_USB1_VIRT_BASE		(ORION_REGS_VIRT_BASE | 0xa0000)
-#define ORION_USB1_REG(x)		(ORION_USB1_VIRT_BASE | (x))
+#define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
+#define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
+#define ORION5X_USB1_REG(x)		(ORION5X_USB1_VIRT_BASE | (x))
 
 /*******************************************************************************
  * Device Bus Registers
  ******************************************************************************/
-#define MPP_0_7_CTRL		ORION_DEV_BUS_REG(0x000)
-#define MPP_8_15_CTRL		ORION_DEV_BUS_REG(0x004)
-#define MPP_16_19_CTRL		ORION_DEV_BUS_REG(0x050)
-#define MPP_DEV_CTRL		ORION_DEV_BUS_REG(0x008)
-#define MPP_RESET_SAMPLE	ORION_DEV_BUS_REG(0x010)
-#define GPIO_OUT		ORION_DEV_BUS_REG(0x100)
-#define GPIO_IO_CONF		ORION_DEV_BUS_REG(0x104)
-#define GPIO_BLINK_EN		ORION_DEV_BUS_REG(0x108)
-#define GPIO_IN_POL		ORION_DEV_BUS_REG(0x10c)
-#define GPIO_DATA_IN		ORION_DEV_BUS_REG(0x110)
-#define GPIO_EDGE_CAUSE		ORION_DEV_BUS_REG(0x114)
-#define GPIO_EDGE_MASK		ORION_DEV_BUS_REG(0x118)
-#define GPIO_LEVEL_MASK		ORION_DEV_BUS_REG(0x11c)
-#define DEV_BANK_0_PARAM	ORION_DEV_BUS_REG(0x45c)
-#define DEV_BANK_1_PARAM	ORION_DEV_BUS_REG(0x460)
-#define DEV_BANK_2_PARAM	ORION_DEV_BUS_REG(0x464)
-#define DEV_BANK_BOOT_PARAM	ORION_DEV_BUS_REG(0x46c)
-#define DEV_BUS_CTRL		ORION_DEV_BUS_REG(0x4c0)
-#define DEV_BUS_INT_CAUSE	ORION_DEV_BUS_REG(0x4d0)
-#define DEV_BUS_INT_MASK	ORION_DEV_BUS_REG(0x4d4)
+#define MPP_0_7_CTRL		ORION5X_DEV_BUS_REG(0x000)
+#define MPP_8_15_CTRL		ORION5X_DEV_BUS_REG(0x004)
+#define MPP_16_19_CTRL		ORION5X_DEV_BUS_REG(0x050)
+#define MPP_DEV_CTRL		ORION5X_DEV_BUS_REG(0x008)
+#define MPP_RESET_SAMPLE	ORION5X_DEV_BUS_REG(0x010)
+#define GPIO_OUT		ORION5X_DEV_BUS_REG(0x100)
+#define GPIO_IO_CONF		ORION5X_DEV_BUS_REG(0x104)
+#define GPIO_BLINK_EN		ORION5X_DEV_BUS_REG(0x108)
+#define GPIO_IN_POL		ORION5X_DEV_BUS_REG(0x10c)
+#define GPIO_DATA_IN		ORION5X_DEV_BUS_REG(0x110)
+#define GPIO_EDGE_CAUSE		ORION5X_DEV_BUS_REG(0x114)
+#define GPIO_EDGE_MASK		ORION5X_DEV_BUS_REG(0x118)
+#define GPIO_LEVEL_MASK		ORION5X_DEV_BUS_REG(0x11c)
+#define DEV_BANK_0_PARAM	ORION5X_DEV_BUS_REG(0x45c)
+#define DEV_BANK_1_PARAM	ORION5X_DEV_BUS_REG(0x460)
+#define DEV_BANK_2_PARAM	ORION5X_DEV_BUS_REG(0x464)
+#define DEV_BANK_BOOT_PARAM	ORION5X_DEV_BUS_REG(0x46c)
+#define DEV_BUS_CTRL		ORION5X_DEV_BUS_REG(0x4c0)
+#define DEV_BUS_INT_CAUSE	ORION5X_DEV_BUS_REG(0x4d0)
+#define DEV_BUS_INT_MASK	ORION5X_DEV_BUS_REG(0x4d4)
 #define GPIO_MAX		32
 
 /***************************************************************************
  * Orion CPU Bridge Registers
  **************************************************************************/
-#define CPU_CONF		ORION_BRIDGE_REG(0x100)
-#define CPU_CTRL		ORION_BRIDGE_REG(0x104)
-#define CPU_RESET_MASK		ORION_BRIDGE_REG(0x108)
-#define CPU_SOFT_RESET		ORION_BRIDGE_REG(0x10c)
-#define POWER_MNG_CTRL_REG	ORION_BRIDGE_REG(0x11C)
-#define BRIDGE_CAUSE		ORION_BRIDGE_REG(0x110)
-#define BRIDGE_MASK		ORION_BRIDGE_REG(0x114)
+#define CPU_CONF		ORION5X_BRIDGE_REG(0x100)
+#define CPU_CTRL		ORION5X_BRIDGE_REG(0x104)
+#define CPU_RESET_MASK		ORION5X_BRIDGE_REG(0x108)
+#define CPU_SOFT_RESET		ORION5X_BRIDGE_REG(0x10c)
+#define POWER_MNG_CTRL_REG	ORION5X_BRIDGE_REG(0x11C)
+#define BRIDGE_CAUSE		ORION5X_BRIDGE_REG(0x110)
+#define BRIDGE_MASK		ORION5X_BRIDGE_REG(0x114)
 #define  BRIDGE_INT_TIMER0	0x0002
 #define  BRIDGE_INT_TIMER1	0x0004
-#define MAIN_IRQ_CAUSE		ORION_BRIDGE_REG(0x200)
-#define MAIN_IRQ_MASK		ORION_BRIDGE_REG(0x204)
+#define MAIN_IRQ_CAUSE		ORION5X_BRIDGE_REG(0x200)
+#define MAIN_IRQ_MASK		ORION5X_BRIDGE_REG(0x204)
 
 
 #endif

include/asm-arm/arch-orion/system.h → include/asm-arm/arch-orion5x/system.h

 /*
- * include/asm-arm/arch-orion/system.h
+ * include/asm-arm/arch-orion5x/system.h
  *
  * Tzachi Perelstein <tzachi@marvell.com>
  *
@@ -12,7 +12,7 @@
 #define __ASM_ARCH_SYSTEM_H
 
 #include <asm/arch/hardware.h>
-#include <asm/arch/orion.h>
+#include <asm/arch/orion5x.h>
 
 static inline void arch_idle(void)
 {
@@ -24,8 +24,8 @@ static inline void arch_reset(char mode)
 	/*
 	 * Enable and issue soft reset
 	 */
-	orion_setbits(CPU_RESET_MASK, (1 << 2));
-	orion_setbits(CPU_SOFT_RESET, 1);
+	orion5x_setbits(CPU_RESET_MASK, (1 << 2));
+	orion5x_setbits(CPU_SOFT_RESET, 1);
 }
 
 

include/asm-arm/arch-orion/timex.h → include/asm-arm/arch-orion5x/timex.h

 /*
- * include/asm-arm/arch-orion/timex.h
+ * include/asm-arm/arch-orion5x/timex.h
  *
  * Tzachi Perelstein <tzachi@marvell.com>
  *
@@ -10,4 +10,4 @@
 
 #define CLOCK_TICK_RATE		(100 * HZ)
 
-#define ORION_TCLK		166666667
+#define ORION5X_TCLK		166666667

include/asm-arm/arch-orion/uncompress.h → include/asm-arm/arch-orion5x/uncompress.h

 /*
- * include/asm-arm/arch-orion/uncompress.h
+ * include/asm-arm/arch-orion5x/uncompress.h
  *
  * Tzachi Perelstein <tzachi@marvell.com>
  *
@@ -8,7 +8,7 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <asm/arch/orion.h>
+#include <asm/arch/orion5x.h>
 
 #define MV_UART_THR	((volatile unsigned char *)(UART0_PHYS_BASE + 0x0))
 #define MV_UART_LSR 	((volatile unsigned char *)(UART0_PHYS_BASE + 0x14))

include/asm-arm/arch-orion/vmalloc.h → include/asm-arm/arch-orion5x/vmalloc.h

 /*
- * include/asm-arm/arch-orion/vmalloc.h
+ * include/asm-arm/arch-orion5x/vmalloc.h
  */
 
 #define VMALLOC_END       0xfd800000