[SCSI] qla2xxx: Add I2C BSG interface.

Add BSG interface to generically access I2C attached devices.
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/qla2xxx/qla_bsg.c

@@ -1559,6 +1559,96 @@ qla2x00_write_fru_status(struct fc_bsg_job *bsg_job)
 	return 0;
 }
 
+static int
+qla2x00_write_i2c(struct fc_bsg_job *bsg_job)
+{
+	struct Scsi_Host *host = bsg_job->shost;
+	scsi_qla_host_t *vha = shost_priv(host);
+	struct qla_hw_data *ha = vha->hw;
+	int rval = 0;
+	uint8_t bsg[DMA_POOL_SIZE];
+	struct qla_i2c_access *i2c = (void *)bsg;
+	dma_addr_t sfp_dma;
+	uint8_t *sfp = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &sfp_dma);
+	if (!sfp) {
+		bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] =
+		    EXT_STATUS_NO_MEMORY;
+		goto done;
+	}
+
+	sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+	    bsg_job->request_payload.sg_cnt, i2c, sizeof(*i2c));
+
+	memcpy(sfp, i2c->buffer, i2c->length);
+	rval = qla2x00_write_sfp(vha, sfp_dma, sfp,
+	    i2c->device, i2c->offset, i2c->length, i2c->option);
+
+	if (rval) {
+		bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] =
+		    EXT_STATUS_MAILBOX;
+		goto dealloc;
+	}
+
+	bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] = 0;
+
+dealloc:
+	dma_pool_free(ha->s_dma_pool, sfp, sfp_dma);
+
+done:
+	bsg_job->reply_len = sizeof(struct fc_bsg_reply);
+	bsg_job->reply->result = DID_OK << 16;
+	bsg_job->job_done(bsg_job);
+
+	return 0;
+}
+
+static int
+qla2x00_read_i2c(struct fc_bsg_job *bsg_job)
+{
+	struct Scsi_Host *host = bsg_job->shost;
+	scsi_qla_host_t *vha = shost_priv(host);
+	struct qla_hw_data *ha = vha->hw;
+	int rval = 0;
+	uint8_t bsg[DMA_POOL_SIZE];
+	struct qla_i2c_access *i2c = (void *)bsg;
+	dma_addr_t sfp_dma;
+	uint8_t *sfp = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL, &sfp_dma);
+	if (!sfp) {
+		bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] =
+		    EXT_STATUS_NO_MEMORY;
+		goto done;
+	}
+
+	sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+	    bsg_job->request_payload.sg_cnt, i2c, sizeof(*i2c));
+
+	rval = qla2x00_read_sfp(vha, sfp_dma, sfp,
+		i2c->device, i2c->offset, i2c->length, i2c->option);
+
+	if (rval) {
+		bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] =
+		    EXT_STATUS_MAILBOX;
+		goto dealloc;
+	}
+
+	memcpy(i2c->buffer, sfp, i2c->length);
+	sg_copy_from_buffer(bsg_job->reply_payload.sg_list,
+	    bsg_job->reply_payload.sg_cnt, i2c, sizeof(*i2c));
+
+	bsg_job->reply->reply_data.vendor_reply.vendor_rsp[0] = 0;
+
+dealloc:
+	dma_pool_free(ha->s_dma_pool, sfp, sfp_dma);
+
+done:
+	bsg_job->reply_len = sizeof(struct fc_bsg_reply);
+	bsg_job->reply->reply_payload_rcv_len = sizeof(*i2c);
+	bsg_job->reply->result = DID_OK << 16;
+	bsg_job->job_done(bsg_job);
+
+	return 0;
+}
+
 static int
 qla2x00_process_vendor_specific(struct fc_bsg_job *bsg_job)
 {
@@ -1596,6 +1686,12 @@ qla2x00_process_vendor_specific(struct fc_bsg_job *bsg_job)
 	case QL_VND_WRITE_FRU_STATUS:
 		return qla2x00_write_fru_status(bsg_job);
 
+	case QL_VND_WRITE_I2C:
+		return qla2x00_write_i2c(bsg_job);
+
+	case QL_VND_READ_I2C:
+		return qla2x00_read_i2c(bsg_job);
+
 	default:
 		bsg_job->reply->result = (DID_ERROR << 16);
 		bsg_job->job_done(bsg_job);

drivers/scsi/qla2xxx/qla_bsg.h

@@ -19,6 +19,8 @@
 #define QL_VND_SET_FRU_VERSION	0x0B
 #define QL_VND_READ_FRU_STATUS	0x0C
 #define QL_VND_WRITE_FRU_STATUS	0x0D
+#define QL_VND_WRITE_I2C	0x10
+#define QL_VND_READ_I2C		0x11
 
 /* BSG Vendor specific subcode returns */
 #define EXT_STATUS_OK			0
@@ -183,4 +185,12 @@ struct qla_status_reg {
 	uint8_t reserved[7];
 } __packed;
 
+struct qla_i2c_access {
+	uint16_t device;
+	uint16_t offset;
+	uint16_t option;
+	uint16_t length;
+	uint8_t  buffer[0x40];
+} __packed;
+
 #endif