omap: GPIO: Fix OMAP4 GPIO reg access issues

Access to some of the OMAP4 GPIO registers are not properly handled.
This patch fixes it.

This patch is tested on 3430SDP and 4430SDP boards
Signed-off-by: Charulatha V <charu@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/plat-omap/gpio.c

@@ -138,7 +138,11 @@
 #define OMAP4_GPIO_IRQSTATUSCLR1	0x0040
 #define OMAP4_GPIO_IRQWAKEN0		0x0044
 #define OMAP4_GPIO_IRQWAKEN1		0x0048
-#define OMAP4_GPIO_SYSSTATUS		0x0104
+#define OMAP4_GPIO_SYSSTATUS		0x0114
+#define OMAP4_GPIO_IRQENABLE1		0x011c
+#define OMAP4_GPIO_WAKE_EN		0x0120
+#define OMAP4_GPIO_IRQSTATUS2		0x0128
+#define OMAP4_GPIO_IRQENABLE2		0x012c
 #define OMAP4_GPIO_CTRL			0x0130
 #define OMAP4_GPIO_OE			0x0134
 #define OMAP4_GPIO_DATAIN		0x0138
@@ -149,6 +153,10 @@
 #define OMAP4_GPIO_FALLINGDETECT	0x014c
 #define OMAP4_GPIO_DEBOUNCENABLE	0x0150
 #define OMAP4_GPIO_DEBOUNCINGTIME	0x0154
+#define OMAP4_GPIO_CLEARIRQENABLE1	0x0160
+#define OMAP4_GPIO_SETIRQENABLE1	0x0164
+#define OMAP4_GPIO_CLEARWKUENA		0x0180
+#define OMAP4_GPIO_SETWKUENA		0x0184
 #define OMAP4_GPIO_CLEARDATAOUT		0x0190
 #define OMAP4_GPIO_SETDATAOUT		0x0194
 /*
@@ -591,11 +599,15 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
 		reg += OMAP7XX_GPIO_DATA_OUTPUT;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
-	case METHOD_GPIO_44XX:
 		reg += OMAP24XX_GPIO_DATAOUT;
 		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_DATAOUT;
+		break;
 #endif
 	default:
 		return -EINVAL;
@@ -1213,11 +1225,17 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
 #endif
 	if (!cpu_class_is_omap1()) {
 		if (!bank->mod_usage) {
+			void __iomem *reg = bank->base;
 			u32 ctrl;
-			ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
-			ctrl &= 0xFFFFFFFE;
+
+			if (cpu_is_omap24xx() || cpu_is_omap34xx())
+				reg += OMAP24XX_GPIO_CTRL;
+			else if (cpu_is_omap44xx())
+				reg += OMAP4_GPIO_CTRL;
+			ctrl = __raw_readl(reg);
 			/* Module is enabled, clocks are not gated */
-			__raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+			ctrl &= 0xFFFFFFFE;
+			__raw_writel(ctrl, reg);
 		}
 		bank->mod_usage |= 1 << offset;
 	}
@@ -1239,22 +1257,34 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 		__raw_writel(1 << offset, reg);
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-	if ((bank->method == METHOD_GPIO_24XX) ||
-			(bank->method == METHOD_GPIO_44XX)) {
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	if (bank->method == METHOD_GPIO_24XX) {
 		/* Disable wake-up during idle for dynamic tick */
 		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 		__raw_writel(1 << offset, reg);
 	}
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	if (bank->method == METHOD_GPIO_44XX) {
+		/* Disable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0;
+		__raw_writel(1 << offset, reg);
+	}
 #endif
 	if (!cpu_class_is_omap1()) {
 		bank->mod_usage &= ~(1 << offset);
 		if (!bank->mod_usage) {
+			void __iomem *reg = bank->base;
 			u32 ctrl;
-			ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+
+			if (cpu_is_omap24xx() || cpu_is_omap34xx())
+				reg += OMAP24XX_GPIO_CTRL;
+			else if (cpu_is_omap44xx())
+				reg += OMAP4_GPIO_CTRL;
+			ctrl = __raw_readl(reg);
 			/* Module is disabled, clocks are gated */
 			ctrl |= 1;
-			__raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+			__raw_writel(ctrl, reg);
 		}
 	}
 	_reset_gpio(bank, bank->chip.base + offset);
@@ -1583,9 +1613,14 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
 		reg += OMAP7XX_GPIO_DIR_CONTROL;
 		break;
 	case METHOD_GPIO_24XX:
-	case METHOD_GPIO_44XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_OE;
+		break;
+	default:
+		WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method");
+		return -EINVAL;
 	}
 	return __raw_readl(reg) & mask;
 }