Commit 9f2fbe17 authored by Vaibhav Hiremath's avatar Vaibhav Hiremath Committed by Benoit Cousson

ARM: dts: AM33XX: Add default pinctrl binding for UART0 device

Add pin control binding for UART0 device nodes in all
board specific DT files.
Signed-off-by: default avatarVaibhav Hiremath <hvaibhav@ti.com>
Acked-by: default avatarMatt Porter <mporter@ti.com>
Signed-off-by: default avatarBenoit Cousson <benoit.cousson@linaro.org>
parent dde3b0d6
...@@ -43,10 +43,20 @@ i2c0_pins: pinmux_i2c0_pins { ...@@ -43,10 +43,20 @@ i2c0_pins: pinmux_i2c0_pins {
0x18c 0x30 /* i2c0_scl.i2c0_scl PULLUP | INPUTENABLE | MODE0 */ 0x18c 0x30 /* i2c0_scl.i2c0_scl PULLUP | INPUTENABLE | MODE0 */
>; >;
}; };
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
0x170 0x30 /* uart0_rxd.uart0_rxd PULLUP | INPUTENABLE | MODE0 */
0x174 0x00 /* uart0_txd.uart0_txd PULLDOWN | MODE0 */
>;
};
}; };
ocp { ocp {
uart0: serial@44e09000 { uart0: serial@44e09000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay"; status = "okay";
}; };
......
...@@ -58,10 +58,20 @@ i2c1_pins: pinmux_i2c1_pins { ...@@ -58,10 +58,20 @@ i2c1_pins: pinmux_i2c1_pins {
0x15c 0x32 /* spi0_cs0.i2c1_scl PULLUP | INPUTENABLE | MODE2 */ 0x15c 0x32 /* spi0_cs0.i2c1_scl PULLUP | INPUTENABLE | MODE2 */
>; >;
}; };
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
0x170 0x30 /* uart0_rxd.uart0_rxd PULLUP | INPUTENABLE | MODE0 */
0x174 0x00 /* uart0_txd.uart0_txd PULLDOWN | MODE0 */
>;
};
}; };
ocp { ocp {
uart0: serial@44e09000 { uart0: serial@44e09000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay"; status = "okay";
}; };
......
...@@ -58,10 +58,20 @@ i2c0_pins: pinmux_i2c0_pins { ...@@ -58,10 +58,20 @@ i2c0_pins: pinmux_i2c0_pins {
0x18c 0x30 /* i2c0_scl.i2c0_scl PULLUP | INPUTENABLE | MODE0 */ 0x18c 0x30 /* i2c0_scl.i2c0_scl PULLUP | INPUTENABLE | MODE0 */
>; >;
}; };
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
0x170 0x30 /* uart0_rxd.uart0_rxd PULLUP | INPUTENABLE | MODE0 */
0x174 0x00 /* uart0_txd.uart0_txd PULLDOWN | MODE0 */
>;
};
}; };
ocp { ocp {
uart0: serial@44e09000 { uart0: serial@44e09000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay"; status = "okay";
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment