net: phy: simplify genphy_config_eee_advert

Use new function phy_modify_mmd_changed(), the result speaks for itself.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/phy_device.c

@@ -1578,31 +1578,16 @@ static int genphy_config_advert(struct phy_device *phydev)
  */
 static int genphy_config_eee_advert(struct phy_device *phydev)
 {
-	int broken = phydev->eee_broken_modes;
-	int old_adv, adv;
+	int err;
 
 	/* Nothing to disable */
-	if (!broken)
+	if (!phydev->eee_broken_modes)
 		return 0;
 
-	/* If the following call fails, we assume that EEE is not
-	 * supported by the phy. If we read 0, EEE is not advertised
-	 * In both case, we don't need to continue
-	 */
-	adv = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV);
-	if (adv <= 0)
-		return 0;
-
-	old_adv = adv;
-	adv &= ~broken;
-
-	/* Advertising remains unchanged with the broken mask */
-	if (old_adv == adv)
-		return 0;
-
-	phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, adv);
-
-	return 1;
+	err = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
+				     phydev->eee_broken_modes, 0);
+	/* If the call failed, we assume that EEE is not supported */
+	return err < 0 ? 0 : err;
 }
 
 /**