Commit 9f7983bd authored by Niklas Söderlund's avatar Niklas Söderlund Committed by Mauro Carvalho Chehab

media: rcar-csi2: Propagate the FLD signal for NTSC and PAL

Depending on which video standard is used the driver needs to setup the
hardware to correctly handle fields. If stream is identified as NTSC
or PAL setup field detection and propagate the field detection signal.

Later versions of the datasheet have been updated to make it clear
that FLD register should be set to 0 when dealing with non-interlaced
field formats.
Signed-off-by: default avatarNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: default avatarHans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
parent 4ab44ff0
...@@ -68,6 +68,7 @@ struct rcar_csi2; ...@@ -68,6 +68,7 @@ struct rcar_csi2;
/* Field Detection Control */ /* Field Detection Control */
#define FLD_REG 0x1c #define FLD_REG 0x1c
#define FLD_FLD_NUM(n) (((n) & 0xff) << 16) #define FLD_FLD_NUM(n) (((n) & 0xff) << 16)
#define FLD_DET_SEL(n) (((n) & 0x3) << 4)
#define FLD_FLD_EN4 BIT(3) #define FLD_FLD_EN4 BIT(3)
#define FLD_FLD_EN3 BIT(2) #define FLD_FLD_EN3 BIT(2)
#define FLD_FLD_EN2 BIT(1) #define FLD_FLD_EN2 BIT(1)
...@@ -478,7 +479,7 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp) ...@@ -478,7 +479,7 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv, unsigned int bpp)
static int rcsi2_start_receiver(struct rcar_csi2 *priv) static int rcsi2_start_receiver(struct rcar_csi2 *priv)
{ {
const struct rcar_csi2_format *format; const struct rcar_csi2_format *format;
u32 phycnt, vcdt = 0, vcdt2 = 0; u32 phycnt, vcdt = 0, vcdt2 = 0, fld = 0;
unsigned int i; unsigned int i;
int mbps, ret; int mbps, ret;
...@@ -510,6 +511,16 @@ static int rcsi2_start_receiver(struct rcar_csi2 *priv) ...@@ -510,6 +511,16 @@ static int rcsi2_start_receiver(struct rcar_csi2 *priv)
vcdt2 |= vcdt_part << ((i % 2) * 16); vcdt2 |= vcdt_part << ((i % 2) * 16);
} }
if (priv->mf.field == V4L2_FIELD_ALTERNATE) {
fld = FLD_DET_SEL(1) | FLD_FLD_EN4 | FLD_FLD_EN3 | FLD_FLD_EN2
| FLD_FLD_EN;
if (priv->mf.height == 240)
fld |= FLD_FLD_NUM(0);
else
fld |= FLD_FLD_NUM(1);
}
phycnt = PHYCNT_ENABLECLK; phycnt = PHYCNT_ENABLECLK;
phycnt |= (1 << priv->lanes) - 1; phycnt |= (1 << priv->lanes) - 1;
...@@ -556,8 +567,7 @@ static int rcsi2_start_receiver(struct rcar_csi2 *priv) ...@@ -556,8 +567,7 @@ static int rcsi2_start_receiver(struct rcar_csi2 *priv)
rcsi2_write(priv, PHYCNT_REG, phycnt); rcsi2_write(priv, PHYCNT_REG, phycnt);
rcsi2_write(priv, LINKCNT_REG, LINKCNT_MONITOR_EN | rcsi2_write(priv, LINKCNT_REG, LINKCNT_MONITOR_EN |
LINKCNT_REG_MONI_PACT_EN | LINKCNT_ICLK_NONSTOP); LINKCNT_REG_MONI_PACT_EN | LINKCNT_ICLK_NONSTOP);
rcsi2_write(priv, FLD_REG, FLD_FLD_NUM(2) | FLD_FLD_EN4 | rcsi2_write(priv, FLD_REG, fld);
FLD_FLD_EN3 | FLD_FLD_EN2 | FLD_FLD_EN);
rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ); rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ);
rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ | PHYCNT_RSTZ); rcsi2_write(priv, PHYCNT_REG, phycnt | PHYCNT_SHUTDOWNZ | PHYCNT_RSTZ);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment