Commit 9fe75aac authored by Sakari Ailus's avatar Sakari Ailus Committed by Mauro Carvalho Chehab

[media] v4l: Unify selection flags documentation

As for the selection targets, the selection flags are now the same on V4L2
and V4L2 subdev interfaces. Also document them so.
Signed-off-by: default avatarSakari Ailus <sakari.ailus@iki.fi>
Acked-by: default avatarSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 563df3d0
......@@ -323,10 +323,10 @@
<para>The drivers should always use the closest possible
rectangle the user requests on all selection targets, unless
specifically told otherwise.
<constant>V4L2_SUBDEV_SEL_FLAG_SIZE_GE</constant> and
<constant>V4L2_SUBDEV_SEL_FLAG_SIZE_LE</constant> flags may be
<constant>V4L2_SEL_FLAG_GE</constant> and
<constant>V4L2_SEL_FLAG_LE</constant> flags may be
used to round the image size either up or down. <xref
linkend="v4l2-subdev-selection-flags"></xref></para>
linkend="v4l2-selection-flags" /></para>
</section>
<section>
......
......@@ -55,7 +55,7 @@ cropping and composing rectangles have the same size.</para>
</section>
See <xref linkend="v4l2-selection-targets-table" /> for more
See <xref linkend="v4l2-selection-targets" /> for more
information.
<section>
......@@ -74,7 +74,7 @@ cropping/composing rectangles may have to be aligned, and both the source and
the sink may have arbitrary upper and lower size limits. Therefore, as usual,
drivers are expected to adjust the requested parameters and return the actual
values selected. An application can control the rounding behaviour using <link
linkend="v4l2-sel-flags"> constraint flags </link>.</para>
linkend="v4l2-selection-flags"> constraint flags </link>.</para>
<section>
......@@ -117,7 +117,7 @@ the bounds rectangle. The composing rectangle must lie completely inside bounds
rectangle. The driver must adjust the composing rectangle to fit to the
bounding limits. Moreover, the driver can perform other adjustments according
to hardware limitations. The application can control rounding behaviour using
<link linkend="v4l2-sel-flags"> constraint flags </link>.</para>
<link linkend="v4l2-selection-flags"> constraint flags </link>.</para>
<para>For capture devices the default composing rectangle is queried using
<constant> V4L2_SEL_TGT_COMPOSE_DEFAULT </constant>. It is usually equal to the
......
<section id="v4l2-selections-common">
<title>Selection targets</title>
<title>Common selection definitions</title>
<para>While the <link linkend="selection-api">V4L2 selection
API</link> and <link linkend="v4l2-subdev-selections">V4L2 subdev
......@@ -10,83 +10,155 @@
sub-device's pad. On the V4L2 interface the selection rectangles
refer to the in-memory pixel format.</para>
<para>The precise meaning of the selection targets may thus be
affected on which of the two interfaces they are used.</para>
<para>This section defines the common definitions of the
selection interfaces on the two APIs.</para>
<table pgwide="1" frame="none" id="v4l2-selection-targets-table">
<title>Selection target definitions</title>
<tgroup cols="5">
<colspec colname="c1" />
<colspec colname="c2" />
<colspec colname="c3" />
<colspec colname="c4" />
<colspec colname="c5" />
&cs-def;
<thead>
<row rowsep="1">
<entry align="left">Target name</entry>
<entry align="left">id</entry>
<entry align="left">Definition</entry>
<entry align="left">Valid for V4L2</entry>
<entry align="left">Valid for V4L2 subdev</entry>
</row>
</thead>
<tbody valign="top">
<row>
<entry><constant>V4L2_SEL_TGT_CROP</constant></entry>
<entry>0x0000</entry>
<entry>Crop rectangle. Defines the cropped area.</entry>
<entry>Yes</entry>
<entry>Yes</entry>
</row>
<row>
<entry><constant>V4L2_SEL_TGT_CROP_DEFAULT</constant></entry>
<entry>0x0001</entry>
<entry>Suggested cropping rectangle that covers the "whole picture".</entry>
<entry>Yes</entry>
<entry>No</entry>
</row>
<row>
<entry><constant>V4L2_SEL_TGT_CROP_BOUNDS</constant></entry>
<entry>0x0002</entry>
<entry>Bounds of the crop rectangle. All valid crop
rectangles fit inside the crop bounds rectangle.
</entry>
<entry>Yes</entry>
<entry>Yes</entry>
</row>
<row>
<entry><constant>V4L2_SEL_TGT_COMPOSE</constant></entry>
<entry>0x0100</entry>
<entry>Compose rectangle. Used to configure scaling
and composition.</entry>
<entry>Yes</entry>
<entry>Yes</entry>
</row>
<row>
<entry><constant>V4L2_SEL_TGT_COMPOSE_DEFAULT</constant></entry>
<entry>0x0101</entry>
<entry>Suggested composition rectangle that covers the "whole picture".</entry>
<entry>Yes</entry>
<entry>No</entry>
</row>
<row>
<entry><constant>V4L2_SEL_TGT_COMPOSE_BOUNDS</constant></entry>
<entry>0x0102</entry>
<entry>Bounds of the compose rectangle. All valid compose
rectangles fit inside the compose bounds rectangle.</entry>
<entry>Yes</entry>
<entry>Yes</entry>
</row>
<row>
<entry><constant>V4L2_SEL_TGT_COMPOSE_PADDED</constant></entry>
<entry>0x0103</entry>
<entry>The active area and all padding pixels that are inserted or
<section id="v4l2-selection-targets">
<title>Selection targets</title>
<para>The precise meaning of the selection targets may be
dependent on which of the two interfaces they are used.</para>
<table pgwide="1" frame="none" id="v4l2-selection-targets-table">
<title>Selection target definitions</title>
<tgroup cols="5">
<colspec colname="c1" />
<colspec colname="c2" />
<colspec colname="c3" />
<colspec colname="c4" />
<colspec colname="c5" />
&cs-def;
<thead>
<row rowsep="1">
<entry align="left">Target name</entry>
<entry align="left">id</entry>
<entry align="left">Definition</entry>
<entry align="left">Valid for V4L2</entry>
<entry align="left">Valid for V4L2 subdev</entry>
</row>
</thead>
<tbody valign="top">
<row>
<entry><constant>V4L2_SEL_TGT_CROP</constant></entry>
<entry>0x0000</entry>
<entry>Crop rectangle. Defines the cropped area.</entry>
<entry>Yes</entry>
<entry>Yes</entry>
</row>
<row>
<entry><constant>V4L2_SEL_TGT_CROP_DEFAULT</constant></entry>
<entry>0x0001</entry>
<entry>Suggested cropping rectangle that covers the "whole picture".</entry>
<entry>Yes</entry>
<entry>No</entry>
</row>
<row>
<entry><constant>V4L2_SEL_TGT_CROP_BOUNDS</constant></entry>
<entry>0x0002</entry>
<entry>Bounds of the crop rectangle. All valid crop
rectangles fit inside the crop bounds rectangle.
</entry>
<entry>Yes</entry>
<entry>Yes</entry>
</row>
<row>
<entry><constant>V4L2_SEL_TGT_COMPOSE</constant></entry>
<entry>0x0100</entry>
<entry>Compose rectangle. Used to configure scaling
and composition.</entry>
<entry>Yes</entry>
<entry>Yes</entry>
</row>
<row>
<entry><constant>V4L2_SEL_TGT_COMPOSE_DEFAULT</constant></entry>
<entry>0x0101</entry>
<entry>Suggested composition rectangle that covers the "whole picture".</entry>
<entry>Yes</entry>
<entry>No</entry>
</row>
<row>
<entry><constant>V4L2_SEL_TGT_COMPOSE_BOUNDS</constant></entry>
<entry>0x0102</entry>
<entry>Bounds of the compose rectangle. All valid compose
rectangles fit inside the compose bounds rectangle.</entry>
<entry>Yes</entry>
<entry>Yes</entry>
</row>
<row>
<entry><constant>V4L2_SEL_TGT_COMPOSE_PADDED</constant></entry>
<entry>0x0103</entry>
<entry>The active area and all padding pixels that are inserted or
modified by hardware.</entry>
<entry>Yes</entry>
<entry>No</entry>
<entry>Yes</entry>
<entry>No</entry>
</row>
</tbody>
</tgroup>
</table>
</section>
<section id="v4l2-selection-flags">
<title>Selection flags</title>
<table pgwide="1" frame="none" id="v4l2-selection-flags-table">
<title>Selection flag definitions</title>
<tgroup cols="5">
<colspec colname="c1" />
<colspec colname="c2" />
<colspec colname="c3" />
<colspec colname="c4" />
<colspec colname="c5" />
&cs-def;
<thead>
<row rowsep="1">
<entry align="left">Flag name</entry>
<entry align="left">id</entry>
<entry align="left">Definition</entry>
<entry align="left">Valid for V4L2</entry>
<entry align="left">Valid for V4L2 subdev</entry>
</row>
</tbody>
</tgroup>
</table>
</thead>
<tbody valign="top">
<row>
<entry><constant>V4L2_SEL_FLAG_GE</constant></entry>
<entry>(1 &lt;&lt; 0)</entry>
<entry>Suggest the driver it should choose greater or
equal rectangle (in size) than was requested. Albeit the
driver may choose a lesser size, it will only do so due to
hardware limitations. Without this flag (and
<constant>V4L2_SEL_FLAG_LE</constant>) the
behaviour is to choose the closest possible
rectangle.</entry>
<entry>Yes</entry>
<entry>Yes</entry>
</row>
<row>
<entry><constant>V4L2_SEL_FLAG_LE</constant></entry>
<entry>(1 &lt;&lt; 1)</entry>
<entry>Suggest the driver it
should choose lesser or equal rectangle (in size) than was
requested. Albeit the driver may choose a greater size, it
will only do so due to hardware limitations.</entry>
<entry>Yes</entry>
<entry>Yes</entry>
</row>
<row>
<entry><constant>V4L2_SEL_FLAG_KEEP_CONFIG</constant></entry>
<entry>(1 &lt;&lt; 2)</entry>
<entry>The configuration should not be propagated to any
further processing steps. If this flag is not given, the
configuration is propagated inside the subdevice to all
further processing steps.</entry>
<entry>No</entry>
<entry>Yes</entry>
</row>
</tbody>
</tgroup>
</table>
</section>
</section>
......@@ -154,32 +154,9 @@ exist no rectangle </emphasis> that satisfies the constraints.</para>
</refsect1>
<para>Selection targets are documented in <xref
<para>Selection targets and flags are documented in <xref
linkend="v4l2-selections-common"/>.</para>
<refsect1>
<table frame="none" pgwide="1" id="v4l2-sel-flags">
<title>Selection constraint flags</title>
<tgroup cols="3">
&cs-def;
<tbody valign="top">
<row>
<entry><constant>V4L2_SEL_FLAG_GE</constant></entry>
<entry>0x00000001</entry>
<entry>Indicates that the adjusted rectangle must contain the original
&v4l2-selection; <structfield>r</structfield> rectangle.</entry>
</row>
<row>
<entry><constant>V4L2_SEL_FLAG_LE</constant></entry>
<entry>0x00000002</entry>
<entry>Indicates that the adjusted rectangle must be inside the original
&v4l2-rect; <structfield>r</structfield> rectangle.</entry>
</row>
</tbody>
</tgroup>
</table>
</refsect1>
<section>
<figure id="sel-const-adjust">
<title>Size adjustments with constraint flags.</title>
......@@ -216,7 +193,7 @@ exist no rectangle </emphasis> that satisfies the constraints.</para>
<entry>__u32</entry>
<entry><structfield>flags</structfield></entry>
<entry>Flags controlling the selection rectangle adjustments, refer to
<link linkend="v4l2-sel-flags">selection flags</link>.</entry>
<link linkend="v4l2-selection-flags">selection flags</link>.</entry>
</row>
<row>
<entry>&v4l2-rect;</entry>
......
......@@ -87,44 +87,9 @@
<constant>EINVAL</constant>.</para>
</section>
<para>Selection targets are documented in <xref
<para>Selection targets and flags are documented in <xref
linkend="v4l2-selections-common"/>.</para>
<table pgwide="1" frame="none" id="v4l2-subdev-selection-flags">
<title>V4L2 subdev selection flags</title>
<tgroup cols="3">
&cs-def;
<tbody valign="top">
<row>
<entry><constant>V4L2_SUBDEV_SEL_FLAG_SIZE_GE</constant></entry>
<entry>(1 &lt;&lt; 0)</entry> <entry>Suggest the driver it
should choose greater or equal rectangle (in size) than
was requested. Albeit the driver may choose a lesser size,
it will only do so due to hardware limitations. Without
this flag (and
<constant>V4L2_SUBDEV_SEL_FLAG_SIZE_LE</constant>) the
behaviour is to choose the closest possible
rectangle.</entry>
</row>
<row>
<entry><constant>V4L2_SUBDEV_SEL_FLAG_SIZE_LE</constant></entry>
<entry>(1 &lt;&lt; 1)</entry> <entry>Suggest the driver it
should choose lesser or equal rectangle (in size) than was
requested. Albeit the driver may choose a greater size, it
will only do so due to hardware limitations.</entry>
</row>
<row>
<entry><constant>V4L2_SUBDEV_SEL_FLAG_KEEP_CONFIG</constant></entry>
<entry>(1 &lt;&lt; 2)</entry>
<entry>The configuration should not be propagated to any
further processing steps. If this flag is not given, the
configuration is propagated inside the subdevice to all
further processing steps.</entry>
</row>
</tbody>
</tgroup>
</table>
<table pgwide="1" frame="none" id="v4l2-subdev-selection">
<title>struct <structname>v4l2_subdev_selection</structname></title>
<tgroup cols="3">
......@@ -151,7 +116,7 @@
<entry>__u32</entry>
<entry><structfield>flags</structfield></entry>
<entry>Flags. See
<xref linkend="v4l2-subdev-selection-flags">.</xref></entry>
<xref linkend="v4l2-selection-flags" />.</entry>
</row>
<row>
<entry>&v4l2-rect;</entry>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment