Commit a097b13c authored by John Crispin's avatar John Crispin Committed by Ralf Baechle

MIPS: ralink: cleanup early_printk

Add support for the new MT7621/8 SoC and kill ifdefs.
Cleanup some whitespace error while we are at it.
Signed-off-by: default avatarJohn Crispin <blogic@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/8028/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent f576fb6a
......@@ -12,21 +12,24 @@
#include <asm/addrspace.h>
#ifdef CONFIG_SOC_RT288X
#define EARLY_UART_BASE 0x300c00
#define EARLY_UART_BASE 0x300c00
#define CHIPID_BASE 0x300004
#elif defined(CONFIG_SOC_MT7621)
#define EARLY_UART_BASE 0x1E000c00
#define CHIPID_BASE 0x1E000004
#else
#define EARLY_UART_BASE 0x10000c00
#define EARLY_UART_BASE 0x10000c00
#define CHIPID_BASE 0x10000004
#endif
#define UART_REG_RX 0x00
#define UART_REG_TX 0x04
#define UART_REG_IER 0x08
#define UART_REG_IIR 0x0c
#define UART_REG_FCR 0x10
#define UART_REG_LCR 0x14
#define UART_REG_MCR 0x18
#define UART_REG_LSR 0x1c
#define MT7628_CHIP_NAME1 0x20203832
#define UART_REG_TX 0x04
#define UART_REG_LSR 0x14
#define UART_REG_LSR_RT2880 0x1c
static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE);
static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE);
static inline void uart_w32(u32 val, unsigned reg)
{
......@@ -38,11 +41,23 @@ static inline u32 uart_r32(unsigned reg)
return __raw_readl(uart_membase + reg);
}
static inline int soc_is_mt7628(void)
{
return IS_ENABLED(CONFIG_SOC_MT7620) &&
(__raw_readl(chipid_membase) == MT7628_CHIP_NAME1);
}
void prom_putchar(unsigned char ch)
{
while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
;
uart_w32(ch, UART_REG_TX);
while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
;
if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) {
uart_w32(ch, UART_TX);
while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
;
} else {
while ((uart_r32(UART_REG_LSR_RT2880) & UART_LSR_THRE) == 0)
;
uart_w32(ch, UART_REG_TX);
while ((uart_r32(UART_REG_LSR_RT2880) & UART_LSR_THRE) == 0)
;
}
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment