Commit a14c2338 authored by Russell King's avatar Russell King Committed by Gregory CLEMENT

ARM: dts: armada388-clearfog: move ethernet related nodes

Move the ethernet, buffer manager, and mdio nodes over to use label form
to reference the devices rather than replicating the device path.
Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
parent aa09b30f
......@@ -71,27 +71,6 @@ reg_3p3v: regulator-3p3v {
soc {
internal-regs {
ethernet@30000 {
phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <2>;
bm,pool-short = <1>;
status = "okay";
};
ethernet@34000 {
phy-mode = "sgmii";
buffer-manager = <&bm>;
bm,pool-long = <3>;
bm,pool-short = <1>;
status = "okay";
fixed-link {
speed = <1000>;
full-duplex;
};
};
sata@a8000 {
/* pinctrl? */
status = "okay";
......@@ -147,6 +126,29 @@ pcie@2,0 {
};
};
&eth1 {
/* ethernet@30000 */
bm,pool-long = <2>;
bm,pool-short = <1>;
buffer-manager = <&bm>;
phy-mode = "sgmii";
status = "okay";
};
&eth2 {
/* ethernet@34000 */
bm,pool-long = <3>;
bm,pool-short = <1>;
buffer-manager = <&bm>;
phy-mode = "sgmii";
status = "okay";
fixed-link {
speed = <1000>;
full-duplex;
};
};
&i2c0 {
/* Is there anything on this? */
clock-frequency = <100000>;
......
......@@ -62,38 +62,6 @@ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
ethernet@70000 {
pinctrl-0 = <&ge0_rgmii_pins>;
pinctrl-names = "default";
phy = <&phy_dedicated>;
phy-mode = "rgmii-id";
buffer-manager = <&bm>;
bm,pool-long = <0>;
bm,pool-short = <1>;
status = "okay";
};
mdio@72004 {
/*
* Add the phy clock here, so the phy can be
* accessed to read its IDs prior to binding
* with the driver.
*/
pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins>;
pinctrl-names = "default";
phy_dedicated: ethernet-phy@0 {
/*
* Annoyingly, the marvell phy driver
* configures the LED register, rather
* than preserving reset-loaded setting.
* We undo that rubbish here.
*/
marvell,reg-init = <3 16 0 0x101e>;
reg = <0>;
};
};
rtc@a3800 {
/*
* If the rtc doesn't work, run "date reset"
......@@ -107,16 +75,46 @@ serial@12000 {
pinctrl-names = "default";
status = "okay";
};
bm@c8000 {
status = "okay";
};
};
};
};
bm-bppi {
status = "okay";
};
&bm {
status = "okay";
};
&bm_bppi {
status = "okay";
};
&eth0 {
/* ethernet@70000 */
pinctrl-0 = <&ge0_rgmii_pins>;
pinctrl-names = "default";
phy = <&phy_dedicated>;
phy-mode = "rgmii-id";
buffer-manager = <&bm>;
bm,pool-long = <0>;
bm,pool-short = <1>;
status = "okay";
};
&mdio {
/*
* Add the phy clock here, so the phy can be accessed to read its
* IDs prior to binding with the driver.
*/
pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins>;
pinctrl-names = "default";
phy_dedicated: ethernet-phy@0 {
/*
* Annoyingly, the marvell phy driver configures the LED
* register, rather than preserving reset-loaded setting.
* We undo that rubbish here.
*/
marvell,reg-init = <3 16 0 0x101e>;
reg = <0>;
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment