Commit a15d95a0 authored by Rafael J. Wysocki's avatar Rafael J. Wysocki Committed by Greg Kroah-Hartman

USB: Fix suspend-resume of PCI USB controllers

Commit a0d4922d
(USB: fix up suspend and resume for PCI host controllers) attempted
to fix the suspend-resume of PCI USB controllers, but unfortunately
it did that incorrectly and interrupts are left enabled by the USB
controllers' ->suspend_late() callback as a result.  This leads to
serious problems during suspend which are very difficult to debug.

Fix the issue by removing the ->suspend_late() callback of PCI
USB controllers and moving the code from there to the ->suspend()
callback executed with interrupts enabled.  Additionally, make
the ->resume() callback of PCI USB controllers execute
pci_enable_wake(dev, PCI_D0, false) to disable wake-up from the
full power state (PCI_D0).
Signed-off-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
Tested-by: default avatarAndrey Borzenkov <arvidjaar@mail.ru>
Tested-by: default avatar"Jeff Chua" <jeff.chua.linux@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: "Zdenek Kabelac" <zdenek.kabelac@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent bcca06ef
......@@ -200,6 +200,7 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
struct usb_hcd *hcd = pci_get_drvdata(dev);
int retval = 0;
int wake, w;
int has_pci_pm;
/* Root hub suspend should have stopped all downstream traffic,
* and all bus master traffic. And done so for both the interface
......@@ -229,6 +230,15 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
synchronize_irq(dev->irq);
/* Downstream ports from this root hub should already be quiesced, so
* there will be no DMA activity. Now we can shut down the upstream
* link (except maybe for PME# resume signaling) and enter some PCI
* low power state, if the hardware allows.
*/
pci_disable_device(dev);
pci_save_state(dev);
/* Don't fail on error to enable wakeup. We rely on pci code
* to reject requests the hardware can't implement, rather
* than coding the same thing.
......@@ -240,35 +250,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message)
wake = w;
dev_dbg(&dev->dev, "wakeup: %d\n", wake);
/* Downstream ports from this root hub should already be quiesced, so
* there will be no DMA activity. Now we can shut down the upstream
* link (except maybe for PME# resume signaling) and enter some PCI
* low power state, if the hardware allows.
*/
pci_disable_device(dev);
done:
return retval;
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
/**
* usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled
* @dev: USB Host Controller being suspended
* @message: Power Management message describing this state transition
*
* Store this function in the HCD's struct pci_driver as .suspend_late.
*/
int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
{
int retval = 0;
int has_pci_pm;
/* We might already be suspended (runtime PM -- not yet written) */
if (dev->current_state != PCI_D0)
goto done;
pci_save_state(dev);
/* Don't change state if we don't need to */
if (message.event == PM_EVENT_FREEZE ||
message.event == PM_EVENT_PRETHAW) {
......@@ -314,7 +295,7 @@ int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
done:
return retval;
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
/**
* usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
......@@ -324,65 +305,8 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
*/
int usb_hcd_pci_resume_early(struct pci_dev *dev)
{
int retval = 0;
pci_power_t state = dev->current_state;
#ifdef CONFIG_PPC_PMAC
/* Reenable ASIC clocks for USB */
if (machine_is(powermac)) {
struct device_node *of_node;
of_node = pci_device_to_OF_node(dev);
if (of_node)
pmac_call_feature(PMAC_FTR_USB_ENABLE,
of_node, 0, 1);
}
#endif
/* NOTE: chip docs cover clean "real suspend" cases (what Linux
* calls "standby", "suspend to RAM", and so on). There are also
* dirty cases when swsusp fakes a suspend in "shutdown" mode.
*/
if (state != PCI_D0) {
#ifdef DEBUG
int pci_pm;
u16 pmcr;
pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr);
pmcr &= PCI_PM_CTRL_STATE_MASK;
if (pmcr) {
/* Clean case: power to USB and to HC registers was
* maintained; remote wakeup is easy.
*/
dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr);
} else {
/* Clean: HC lost Vcc power, D0 uninitialized
* + Vaux may have preserved port and transceiver
* state ... for remote wakeup from D3cold
* + or not; HCD must reinit + re-enumerate
*
* Dirty: D0 semi-initialized cases with swsusp
* + after BIOS init
* + after Linux init (HCD statically linked)
*/
dev_dbg(&dev->dev, "resume from previous PCI D%d\n",
state);
}
#endif
retval = pci_set_power_state(dev, PCI_D0);
} else {
/* Same basic cases: clean (powered/not), dirty */
dev_dbg(&dev->dev, "PCI legacy resume\n");
}
if (retval < 0)
dev_err(&dev->dev, "can't resume: %d\n", retval);
else
pci_restore_state(dev);
return retval;
pci_restore_state(dev);
return 0;
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);
......@@ -397,6 +321,18 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
struct usb_hcd *hcd;
int retval;
#ifdef CONFIG_PPC_PMAC
/* Reenable ASIC clocks for USB */
if (machine_is(powermac)) {
struct device_node *of_node;
of_node = pci_device_to_OF_node(dev);
if (of_node)
pmac_call_feature(PMAC_FTR_USB_ENABLE,
of_node, 0, 1);
}
#endif
hcd = pci_get_drvdata(dev);
if (hcd->state != HC_STATE_SUSPENDED) {
dev_dbg(hcd->self.controller,
......@@ -404,6 +340,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev)
return 0;
}
pci_enable_wake(dev, PCI_D0, false);
retval = pci_enable_device(dev);
if (retval < 0) {
dev_err(&dev->dev, "can't re-enable after resume, %d!\n",
......
......@@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev);
#ifdef CONFIG_PM
extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg);
extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
extern int usb_hcd_pci_resume(struct pci_dev *dev);
#endif /* CONFIG_PM */
......
......@@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver = {
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
.suspend_late = usb_hcd_pci_suspend_late,
.resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif
......
......@@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver = {
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
.suspend_late = usb_hcd_pci_suspend_late,
.resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif
......
......@@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver = {
#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
.suspend_late = usb_hcd_pci_suspend_late,
.resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif /* PM */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment