Commit a1def453 authored by Roger Quadros's avatar Roger Quadros Committed by Tony Lindgren

ARM: dts: am57xx-beagle-x15: remove extcon_usb1

USB1 controller is hardwired to be used as Host only port so
we don't need to check ID pin state and can get rid of extcon_usb1.

This also reduces USB1 controller's and so eSATA power's dependency
with EXTCON. This fixes eSATA port with multi_v7_defconfig.

Cc: Franklin S Cooper Jr. <fcooper@ti.com>
Cc: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: default avatarRoger Quadros <rogerq@ti.com>
Tested-by: default avatarFranklin S Cooper Jr. <fcooper@ti.com>
[tony@atomide.com: updated to describe what it fixes]
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 883cbc90
...@@ -99,13 +99,6 @@ gpio_fan: gpio_fan { ...@@ -99,13 +99,6 @@ gpio_fan: gpio_fan {
#cooling-cells = <2>; #cooling-cells = <2>;
}; };
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&extcon_usb1_pins>;
};
hdmi0: connector { hdmi0: connector {
compatible = "hdmi-connector"; compatible = "hdmi-connector";
label = "hdmi"; label = "hdmi";
...@@ -349,12 +342,6 @@ DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ ...@@ -349,12 +342,6 @@ DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
>; >;
}; };
extcon_usb1_pins: extcon_usb1_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
>;
};
tpd12s015_pins: pinmux_tpd12s015_pins { tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = < pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */ DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
...@@ -706,10 +693,6 @@ &usb1 { ...@@ -706,10 +693,6 @@ &usb1 {
pinctrl-0 = <&usb1_pins>; pinctrl-0 = <&usb1_pins>;
}; };
&omap_dwc3_1 {
extcon = <&extcon_usb1>;
};
&omap_dwc3_2 { &omap_dwc3_2 {
extcon = <&extcon_usb2>; extcon = <&extcon_usb2>;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment