Commit a228890f authored by Icenowy Zheng's avatar Icenowy Zheng Committed by Kishon Vijay Abraham I

phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC

Allwinner H6 SoC contains a USB3 PHY (with USB2 DP/DM lines also
controlled).

Add a driver for it.

The register operations in this driver is mainly extracted from the BSP
USB3 driver.
Signed-off-by: default avatarOndrej Jirman <megous@megous.com>
Signed-off-by: default avatarIcenowy Zheng <icenowy@aosc.io>
Reviewed-by: default avatarChen-Yu Tsai <wens@csie.org>
Acked-by: default avatarMaxime Ripard <mripard@kernel.org>
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
parent 6bd03e71
...@@ -45,3 +45,14 @@ config PHY_SUN9I_USB ...@@ -45,3 +45,14 @@ config PHY_SUN9I_USB
sun9i SoCs. sun9i SoCs.
This driver controls each individual USB 2 host PHY. This driver controls each individual USB 2 host PHY.
config PHY_SUN50I_USB3
tristate "Allwinner H6 SoC USB3 PHY driver"
depends on ARCH_SUNXI && HAS_IOMEM && OF
depends on RESET_CONTROLLER
select GENERIC_PHY
help
Enable this to support the USB3.0-capable transceiver that is
part of Allwinner H6 SoC.
This driver controls each individual USB 2+3 host PHY combo.
...@@ -2,3 +2,4 @@ ...@@ -2,3 +2,4 @@
obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
obj-$(CONFIG_PHY_SUN6I_MIPI_DPHY) += phy-sun6i-mipi-dphy.o obj-$(CONFIG_PHY_SUN6I_MIPI_DPHY) += phy-sun6i-mipi-dphy.o
obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
obj-$(CONFIG_PHY_SUN50I_USB3) += phy-sun50i-usb3.o
// SPDX-License-Identifier: GPL-2.0+
/*
* Allwinner sun50i(H6) USB 3.0 phy driver
*
* Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
*
* Based on phy-sun9i-usb.c, which is:
*
* Copyright (C) 2014-2015 Chen-Yu Tsai <wens@csie.org>
*
* Based on code from Allwinner BSP, which is:
*
* Copyright (c) 2010-2015 Allwinner Technology Co., Ltd.
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
/* Interface Status and Control Registers */
#define SUNXI_ISCR 0x00
#define SUNXI_PIPE_CLOCK_CONTROL 0x14
#define SUNXI_PHY_TUNE_LOW 0x18
#define SUNXI_PHY_TUNE_HIGH 0x1c
#define SUNXI_PHY_EXTERNAL_CONTROL 0x20
/* USB2.0 Interface Status and Control Register */
#define SUNXI_ISCR_FORCE_VBUS (3 << 12)
/* PIPE Clock Control Register */
#define SUNXI_PCC_PIPE_CLK_OPEN (1 << 6)
/* PHY External Control Register */
#define SUNXI_PEC_EXTERN_VBUS (3 << 1)
#define SUNXI_PEC_SSC_EN (1 << 24)
#define SUNXI_PEC_REF_SSP_EN (1 << 26)
/* PHY Tune High Register */
#define SUNXI_TX_DEEMPH_3P5DB(n) ((n) << 19)
#define SUNXI_TX_DEEMPH_3P5DB_MASK GENMASK(24, 19)
#define SUNXI_TX_DEEMPH_6DB(n) ((n) << 13)
#define SUNXI_TX_DEEMPH_6GB_MASK GENMASK(18, 13)
#define SUNXI_TX_SWING_FULL(n) ((n) << 6)
#define SUNXI_TX_SWING_FULL_MASK GENMASK(12, 6)
#define SUNXI_LOS_BIAS(n) ((n) << 3)
#define SUNXI_LOS_BIAS_MASK GENMASK(5, 3)
#define SUNXI_TXVBOOSTLVL(n) ((n) << 0)
#define SUNXI_TXVBOOSTLVL_MASK GENMASK(0, 2)
struct sun50i_usb3_phy {
struct phy *phy;
void __iomem *regs;
struct reset_control *reset;
struct clk *clk;
};
static void sun50i_usb3_phy_open(struct sun50i_usb3_phy *phy)
{
u32 val;
val = readl(phy->regs + SUNXI_PHY_EXTERNAL_CONTROL);
val |= SUNXI_PEC_EXTERN_VBUS;
val |= SUNXI_PEC_SSC_EN | SUNXI_PEC_REF_SSP_EN;
writel(val, phy->regs + SUNXI_PHY_EXTERNAL_CONTROL);
val = readl(phy->regs + SUNXI_PIPE_CLOCK_CONTROL);
val |= SUNXI_PCC_PIPE_CLK_OPEN;
writel(val, phy->regs + SUNXI_PIPE_CLOCK_CONTROL);
val = readl(phy->regs + SUNXI_ISCR);
val |= SUNXI_ISCR_FORCE_VBUS;
writel(val, phy->regs + SUNXI_ISCR);
/*
* All the magic numbers written to the PHY_TUNE_{LOW_HIGH}
* registers are directly taken from the BSP USB3 driver from
* Allwiner.
*/
writel(0x0047fc87, phy->regs + SUNXI_PHY_TUNE_LOW);
val = readl(phy->regs + SUNXI_PHY_TUNE_HIGH);
val &= ~(SUNXI_TXVBOOSTLVL_MASK | SUNXI_LOS_BIAS_MASK |
SUNXI_TX_SWING_FULL_MASK | SUNXI_TX_DEEMPH_6GB_MASK |
SUNXI_TX_DEEMPH_3P5DB_MASK);
val |= SUNXI_TXVBOOSTLVL(0x7);
val |= SUNXI_LOS_BIAS(0x7);
val |= SUNXI_TX_SWING_FULL(0x55);
val |= SUNXI_TX_DEEMPH_6DB(0x20);
val |= SUNXI_TX_DEEMPH_3P5DB(0x15);
writel(val, phy->regs + SUNXI_PHY_TUNE_HIGH);
}
static int sun50i_usb3_phy_init(struct phy *_phy)
{
struct sun50i_usb3_phy *phy = phy_get_drvdata(_phy);
int ret;
ret = clk_prepare_enable(phy->clk);
if (ret)
return ret;
ret = reset_control_deassert(phy->reset);
if (ret) {
clk_disable_unprepare(phy->clk);
return ret;
}
sun50i_usb3_phy_open(phy);
return 0;
}
static int sun50i_usb3_phy_exit(struct phy *_phy)
{
struct sun50i_usb3_phy *phy = phy_get_drvdata(_phy);
reset_control_assert(phy->reset);
clk_disable_unprepare(phy->clk);
return 0;
}
static const struct phy_ops sun50i_usb3_phy_ops = {
.init = sun50i_usb3_phy_init,
.exit = sun50i_usb3_phy_exit,
.owner = THIS_MODULE,
};
static int sun50i_usb3_phy_probe(struct platform_device *pdev)
{
struct sun50i_usb3_phy *phy;
struct device *dev = &pdev->dev;
struct phy_provider *phy_provider;
struct resource *res;
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
phy->clk = devm_clk_get(dev, NULL);
if (IS_ERR(phy->clk)) {
if (PTR_ERR(phy->clk) != -EPROBE_DEFER)
dev_err(dev, "failed to get phy clock\n");
return PTR_ERR(phy->clk);
}
phy->reset = devm_reset_control_get(dev, NULL);
if (IS_ERR(phy->reset)) {
dev_err(dev, "failed to get reset control\n");
return PTR_ERR(phy->reset);
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
phy->regs = devm_ioremap_resource(dev, res);
if (IS_ERR(phy->regs))
return PTR_ERR(phy->regs);
phy->phy = devm_phy_create(dev, NULL, &sun50i_usb3_phy_ops);
if (IS_ERR(phy->phy)) {
dev_err(dev, "failed to create PHY\n");
return PTR_ERR(phy->phy);
}
phy_set_drvdata(phy->phy, phy);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id sun50i_usb3_phy_of_match[] = {
{ .compatible = "allwinner,sun50i-h6-usb3-phy" },
{ },
};
MODULE_DEVICE_TABLE(of, sun50i_usb3_phy_of_match);
static struct platform_driver sun50i_usb3_phy_driver = {
.probe = sun50i_usb3_phy_probe,
.driver = {
.of_match_table = sun50i_usb3_phy_of_match,
.name = "sun50i-usb3-phy",
}
};
module_platform_driver(sun50i_usb3_phy_driver);
MODULE_DESCRIPTION("Allwinner H6 USB 3.0 phy driver");
MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.io>");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment