Merge master.kernel.org:/home/rmk/linux-2.6-mmc

drivers/mmc/mmc_block.c

@@ -203,7 +203,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 			brq.data.flags |= MMC_DATA_READ;
 		} else {
 			brq.cmd.opcode = MMC_WRITE_BLOCK;
-			brq.cmd.flags = MMC_RSP_R1B;
 			brq.data.flags |= MMC_DATA_WRITE;
 			brq.data.blocks = 1;
 		}

drivers/mmc/wbsd.c

@@ -201,7 +201,7 @@ static void wbsd_reset(struct wbsd_host* host)
 {
 	u8 setup;
 
-	printk(KERN_ERR DRIVER_NAME ": Resetting chip\n");
+	printk(KERN_ERR "%s: Resetting chip\n", mmc_hostname(host->mmc));
 
 	/*
 	 * Soft reset of chip (SD/MMC part).
@@ -880,8 +880,9 @@ static void wbsd_finish_data(struct wbsd_host* host, struct mmc_data* data)
 		 */
 		if (count)
 		{
-			printk(KERN_ERR DRIVER_NAME ": Incomplete DMA "
-				"transfer. %d bytes left.\n", count);
+			printk(KERN_ERR "%s: Incomplete DMA transfer. "
+				"%d bytes left.\n",
+				mmc_hostname(host->mmc), count);
 
 			data->error = MMC_ERR_FAILED;
 		}
@@ -1169,8 +1170,8 @@ static void wbsd_tasklet_card(unsigned long param)
 
 		if (host->mrq)
 		{
-			printk(KERN_ERR DRIVER_NAME
-				": Card removed during transfer!\n");
+			printk(KERN_ERR "%s: Card removed during transfer!\n",
+				mmc_hostname(host->mmc));
 			wbsd_reset(host);
 
 			host->mrq->cmd->error = MMC_ERR_FAILED;
@@ -1852,9 +1853,9 @@ static int __devinit wbsd_init(struct device* dev, int base, int irq, int dma,
 	/*
 	 * See if chip needs to be configured.
 	 */
-	if (pnp && (host->config != 0))
+	if (pnp)
 	{
-		if (!wbsd_chip_validate(host))
+		if ((host->config != 0) && !wbsd_chip_validate(host))
 		{
 			printk(KERN_WARNING DRIVER_NAME
 				": PnP active but chip not configured! "