Commit a312c87a authored by Artem Bityutskiy's avatar Artem Bityutskiy Committed by David Woodhouse

mtd: remove the tqm8xxl map driver

This driver depends on the CONFIG_TQM8xxL symbol, which is not defined
anywhere, which means that this driver is dead.
Signed-off-by: default avatarArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent 83bfc0d1
...@@ -274,16 +274,6 @@ config MTD_L440GX ...@@ -274,16 +274,6 @@ config MTD_L440GX
BE VERY CAREFUL. BE VERY CAREFUL.
config MTD_TQM8XXL
tristate "CFI Flash device mapped on TQM8XXL"
depends on MTD_CFI && TQM8xxL
help
The TQM8xxL PowerPC board has up to two banks of CFI-compliant
chips, currently uses AMD one. This 'mapping' driver supports
that arrangement, allowing the CFI probe and command set driver
code to communicate with the chips on the TQM8xxL board. More at
<http://www.denx.de/wiki/PPCEmbedded/>.
config MTD_CFI_FLAGADM config MTD_CFI_FLAGADM
tristate "CFI Flash device mapping on FlagaDM" tristate "CFI Flash device mapping on FlagaDM"
depends on 8xx && MTD_CFI depends on 8xx && MTD_CFI
......
...@@ -23,7 +23,6 @@ obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o ...@@ -23,7 +23,6 @@ obj-$(CONFIG_MTD_PHYSMAP_OF) += physmap_of.o
obj-$(CONFIG_MTD_PISMO) += pismo.o obj-$(CONFIG_MTD_PISMO) += pismo.o
obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o obj-$(CONFIG_MTD_PMC_MSP_EVM) += pmcmsp-flash.o
obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o
obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o
obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o
obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o
obj-$(CONFIG_MTD_SC520CDP) += sc520cdp.o obj-$(CONFIG_MTD_SC520CDP) += sc520cdp.o
......
/*
* Handle mapping of the flash memory access routines
* on TQM8xxL based devices.
*
* based on rpxlite.c
*
* Copyright(C) 2001 Kirk Lee <kirk@hpc.ee.ntu.edu.tw>
*
* This code is GPLed
*
*/
/*
* According to TQM8xxL hardware manual, TQM8xxL series have
* following flash memory organisations:
* | capacity | | chip type | | bank0 | | bank1 |
* 2MiB 512Kx16 2MiB 0
* 4MiB 1Mx16 4MiB 0
* 8MiB 1Mx16 4MiB 4MiB
* Thus, we choose CONFIG_MTD_CFI_I2 & CONFIG_MTD_CFI_B4 at
* kernel configuration.
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
#define FLASH_ADDR 0x40000000
#define FLASH_SIZE 0x00800000
#define FLASH_BANK_MAX 4
// trivial struct to describe partition information
struct mtd_part_def
{
int nums;
unsigned char *type;
struct mtd_partition* mtd_part;
};
//static struct mtd_info *mymtd;
static struct mtd_info* mtd_banks[FLASH_BANK_MAX];
static struct map_info* map_banks[FLASH_BANK_MAX];
static struct mtd_part_def part_banks[FLASH_BANK_MAX];
static unsigned long num_banks;
static void __iomem *start_scan_addr;
/*
* Here are partition information for all known TQM8xxL series devices.
* See include/linux/mtd/partitions.h for definition of the mtd_partition
* structure.
*
* The *_max_flash_size is the maximum possible mapped flash size which
* is not necessarily the actual flash size. It must correspond to the
* value specified in the mapping definition defined by the
* "struct map_desc *_io_desc" for the corresponding machine.
*/
/* Currently, TQM8xxL has up to 8MiB flash */
static unsigned long tqm8xxl_max_flash_size = 0x00800000;
/* partition definition for first flash bank
* (cf. "drivers/char/flash_config.c")
*/
static struct mtd_partition tqm8xxl_partitions[] = {
{
.name = "ppcboot",
.offset = 0x00000000,
.size = 0x00020000, /* 128KB */
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "kernel", /* default kernel image */
.offset = 0x00020000,
.size = 0x000e0000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "user",
.offset = 0x00100000,
.size = 0x00100000,
},
{
.name = "initrd",
.offset = 0x00200000,
.size = 0x00200000,
}
};
/* partition definition for second flash bank */
static struct mtd_partition tqm8xxl_fs_partitions[] = {
{
.name = "cramfs",
.offset = 0x00000000,
.size = 0x00200000,
},
{
.name = "jffs",
.offset = 0x00200000,
.size = 0x00200000,
//.size = MTDPART_SIZ_FULL,
}
};
static int __init init_tqm_mtd(void)
{
int idx = 0, ret = 0;
unsigned long flash_addr, flash_size, mtd_size = 0;
/* pointer to TQM8xxL board info data */
bd_t *bd = (bd_t *)__res;
flash_addr = bd->bi_flashstart;
flash_size = bd->bi_flashsize;
//request maximum flash size address space
start_scan_addr = ioremap(flash_addr, flash_size);
if (!start_scan_addr) {
printk(KERN_WARNING "%s:Failed to ioremap address:0x%x\n", __func__, flash_addr);
return -EIO;
}
for (idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
if(mtd_size >= flash_size)
break;
printk(KERN_INFO "%s: chip probing count %d\n", __func__, idx);
map_banks[idx] = kzalloc(sizeof(struct map_info), GFP_KERNEL);
if(map_banks[idx] == NULL) {
ret = -ENOMEM;
/* FIXME: What if some MTD devices were probed already? */
goto error_mem;
}
map_banks[idx]->name = kmalloc(16, GFP_KERNEL);
if (!map_banks[idx]->name) {
ret = -ENOMEM;
/* FIXME: What if some MTD devices were probed already? */
goto error_mem;
}
sprintf(map_banks[idx]->name, "TQM8xxL%d", idx);
map_banks[idx]->size = flash_size;
map_banks[idx]->bankwidth = 4;
simple_map_init(map_banks[idx]);
map_banks[idx]->virt = start_scan_addr;
map_banks[idx]->phys = flash_addr;
/* FIXME: This looks utterly bogus, but I'm trying to
preserve the behaviour of the original (shown here)...
map_banks[idx]->map_priv_1 =
start_scan_addr + ((idx > 0) ?
(mtd_banks[idx-1] ? mtd_banks[idx-1]->size : 0) : 0);
*/
if (idx && mtd_banks[idx-1]) {
map_banks[idx]->virt += mtd_banks[idx-1]->size;
map_banks[idx]->phys += mtd_banks[idx-1]->size;
}
//start to probe flash chips
mtd_banks[idx] = do_map_probe("cfi_probe", map_banks[idx]);
if (mtd_banks[idx]) {
mtd_banks[idx]->owner = THIS_MODULE;
mtd_size += mtd_banks[idx]->size;
num_banks++;
printk(KERN_INFO "%s: bank%d, name:%s, size:%dbytes \n", __func__, num_banks,
mtd_banks[idx]->name, mtd_banks[idx]->size);
}
}
/* no supported flash chips found */
if (!num_banks) {
printk(KERN_NOTICE "TQM8xxL: No support flash chips found!\n");
ret = -ENXIO;
goto error_mem;
}
/*
* Select Static partition definitions
*/
part_banks[0].mtd_part = tqm8xxl_partitions;
part_banks[0].type = "Static image";
part_banks[0].nums = ARRAY_SIZE(tqm8xxl_partitions);
part_banks[1].mtd_part = tqm8xxl_fs_partitions;
part_banks[1].type = "Static file system";
part_banks[1].nums = ARRAY_SIZE(tqm8xxl_fs_partitions);
for(idx = 0; idx < num_banks ; idx++) {
if (part_banks[idx].nums == 0)
printk(KERN_NOTICE "TQM flash%d: no partition info available, registering whole flash at once\n", idx);
else
printk(KERN_NOTICE "TQM flash%d: Using %s partition definition\n",
idx, part_banks[idx].type);
mtd_device_register(mtd_banks[idx], part_banks[idx].mtd_part,
part_banks[idx].nums);
}
return 0;
error_mem:
for(idx = 0 ; idx < FLASH_BANK_MAX ; idx++) {
if(map_banks[idx] != NULL) {
kfree(map_banks[idx]->name);
map_banks[idx]->name = NULL;
kfree(map_banks[idx]);
map_banks[idx] = NULL;
}
}
error:
iounmap(start_scan_addr);
return ret;
}
static void __exit cleanup_tqm_mtd(void)
{
unsigned int idx = 0;
for(idx = 0 ; idx < num_banks ; idx++) {
/* destroy mtd_info previously allocated */
if (mtd_banks[idx]) {
mtd_device_unregister(mtd_banks[idx]);
map_destroy(mtd_banks[idx]);
}
/* release map_info not used anymore */
kfree(map_banks[idx]->name);
kfree(map_banks[idx]);
}
if (start_scan_addr) {
iounmap(start_scan_addr);
start_scan_addr = 0;
}
}
module_init(init_tqm_mtd);
module_exit(cleanup_tqm_mtd);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Kirk Lee <kirk@hpc.ee.ntu.edu.tw>");
MODULE_DESCRIPTION("MTD map driver for TQM8xxL boards");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment