Commit a34c31a9 authored by Lars-Peter Clausen's avatar Lars-Peter Clausen Committed by Mark Brown

ASoC: adav80x: Replace direct snd_soc_codec dapm field access

The dapm field of the snd_soc_codec struct is eventually going to be
removed, in preparation for this replace all manual access to
codec->dapm.bias_level with snd_soc_codec_get_bias_level().
Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent b787f68c
......@@ -539,7 +539,7 @@ static int adav80x_set_sysclk(struct snd_soc_codec *codec,
unsigned int freq, int dir)
{
struct adav80x *adav80x = snd_soc_codec_get_drvdata(codec);
struct snd_soc_dapm_context *dapm = &codec->dapm;
struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
if (dir == SND_SOC_CLOCK_IN) {
switch (clk_id) {
......@@ -622,6 +622,7 @@ static int adav80x_set_sysclk(struct snd_soc_codec *codec,
static int adav80x_set_pll(struct snd_soc_codec *codec, int pll_id,
int source, unsigned int freq_in, unsigned int freq_out)
{
struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
struct adav80x *adav80x = snd_soc_codec_get_drvdata(codec);
unsigned int pll_ctrl1 = 0;
unsigned int pll_ctrl2 = 0;
......@@ -687,7 +688,7 @@ static int adav80x_set_pll(struct snd_soc_codec *codec, int pll_id,
adav80x->pll_src = source;
snd_soc_dapm_sync(&codec->dapm);
snd_soc_dapm_sync(dapm);
}
return 0;
......@@ -801,11 +802,12 @@ static struct snd_soc_dai_driver adav80x_dais[] = {
static int adav80x_probe(struct snd_soc_codec *codec)
{
struct snd_soc_dapm_context *dapm = snd_soc_codec_get_dapm(codec);
struct adav80x *adav80x = snd_soc_codec_get_drvdata(codec);
/* Force PLLs on for SYSCLK output */
snd_soc_dapm_force_enable_pin(&codec->dapm, "PLL1");
snd_soc_dapm_force_enable_pin(&codec->dapm, "PLL2");
snd_soc_dapm_force_enable_pin(dapm, "PLL1");
snd_soc_dapm_force_enable_pin(dapm, "PLL2");
/* Power down S/PDIF receiver, since it is currently not supported */
regmap_write(adav80x->regmap, ADAV80X_PLL_OUTE, 0x20);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment