Commit a3692020 authored by Ralf Baechle's avatar Ralf Baechle

[MIPS] Enable support for the userlocal hardware register

Which will cut down the cost of RDHWR $29 which is used to obtain the
TLS pointer and so far being emulated in software down to a single cycle
operation.
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent d223a861
......@@ -588,6 +588,8 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c)
c->options |= MIPS_CPU_VEIC;
if (config3 & MIPS_CONF3_MT)
c->ases |= MIPS_ASE_MIPSMT;
if (config3 & MIPS_CONF3_ULRI)
c->options |= MIPS_CPU_ULRI;
return config3 & MIPS_CONF_M;
}
......
......@@ -272,9 +272,8 @@ asmlinkage int sys_set_thread_area(unsigned long addr)
struct thread_info *ti = task_thread_info(current);
ti->tp_value = addr;
/* If some future MIPS implementation has this register in hardware,
* we will need to update it here (and in context switches). */
if (cpu_has_userlocal)
write_c0_userlocal(addr);
return 0;
}
......
......@@ -1341,7 +1341,14 @@ void __init per_cpu_trap_init(void)
set_c0_status(ST0_MX);
#ifdef CONFIG_CPU_MIPSR2
write_c0_hwrena (0x0000000f); /* Allow rdhwr to all registers */
if (cpu_has_mips_r2) {
unsigned int enable = 0x0000000f;
if (cpu_has_userlocal)
enable |= (1 << 29);
write_c0_hwrena(enable);
}
#endif
#ifdef CONFIG_MIPS_MT_SMTC
......
......@@ -150,6 +150,10 @@
#define cpu_has_mipsmt (cpu_data[0].ases & MIPS_ASE_MIPSMT)
#endif
#ifndef cpu_has_userlocal
#define cpu_has_userlocal (cpu_data[0].options & MIPS_CPU_ULRI)
#endif
#ifdef CONFIG_32BIT
# ifndef cpu_has_nofpuex
# define cpu_has_nofpuex (cpu_data[0].options & MIPS_CPU_NOFPUEX)
......
......@@ -257,6 +257,7 @@
#define MIPS_CPU_PREFETCH 0x00080000 /* CPU has usable prefetch */
#define MIPS_CPU_VINT 0x00100000 /* CPU supports MIPSR2 vectored interrupts */
#define MIPS_CPU_VEIC 0x00200000 /* CPU supports MIPSR2 external interrupt controller mode */
#define MIPS_CPU_ULRI 0x00400000 /* CPU has ULRI feature */
/*
* CPU ASE encodings
......
......@@ -7,7 +7,7 @@
* Copyright (C) 2000 Silicon Graphics, Inc.
* Modified for further R[236]000 support by Paul M. Antoine, 1996.
* Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
* Copyright (C) 2000, 07 MIPS Technologies, Inc.
* Copyright (C) 2003, 2004 Maciej W. Rozycki
*/
#ifndef _ASM_MIPSREGS_H
......@@ -533,6 +533,7 @@
#define MIPS_CONF3_VEIC (_ULCAST_(1) << 6)
#define MIPS_CONF3_LPA (_ULCAST_(1) << 7)
#define MIPS_CONF3_DSP (_ULCAST_(1) << 10)
#define MIPS_CONF3_ULRI (_ULCAST_(1) << 13)
#define MIPS_CONF7_WII (_ULCAST_(1) << 31)
......@@ -772,6 +773,9 @@ do { \
#define read_c0_context() __read_ulong_c0_register($4, 0)
#define write_c0_context(val) __write_ulong_c0_register($4, 0, val)
#define read_c0_userlocal() __read_ulong_c0_register($4, 2)
#define write_c0_userlocal(val) __write_ulong_c0_register($4, 2, val)
#define read_c0_pagemask() __read_32bit_c0_register($5, 0)
#define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val)
......
......@@ -67,6 +67,8 @@ do { \
(last) = resume(prev, next, task_thread_info(next)); \
if (cpu_has_dsp) \
__restore_dsp(current); \
if (cpu_has_userlocal) \
write_c0_userlocal(task_thread_info(current)->tp_value);\
} while(0)
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment