Commit a3f37a10 authored by Shobhit Kumar's avatar Shobhit Kumar Committed by Daniel Vetter

pwm: crc: Add Crystalcove (CRC) PWM driver

The Crystalcove PMIC provides three PWM signals and this driver exports
one of them on the BYT platform which is used to control backlight for
DSI panel. This is platform device implementation of the drivers/mfd
cell device for CRC PMIC.

CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Tested-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: default avatarShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: default avatarVarka Bhadram <varkabhadram@gmail.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent a3aa9a93
......@@ -111,6 +111,13 @@ config PWM_CLPS711X
To compile this driver as a module, choose M here: the module
will be called pwm-clps711x.
config PWM_CRC
bool "Intel Crystalcove (CRC) PWM support"
depends on X86 && INTEL_SOC_PMIC
help
Generic PWM framework driver for Crystalcove (CRC) PMIC based PWM
control.
config PWM_EP93XX
tristate "Cirrus Logic EP93xx PWM support"
depends on ARCH_EP93XX
......
......@@ -8,6 +8,7 @@ obj-$(CONFIG_PWM_BCM_KONA) += pwm-bcm-kona.o
obj-$(CONFIG_PWM_BCM2835) += pwm-bcm2835.o
obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o
obj-$(CONFIG_PWM_CLPS711X) += pwm-clps711x.o
obj-$(CONFIG_PWM_CRC) += pwm-crc.o
obj-$(CONFIG_PWM_EP93XX) += pwm-ep93xx.o
obj-$(CONFIG_PWM_FSL_FTM) += pwm-fsl-ftm.o
obj-$(CONFIG_PWM_IMG) += pwm-img.o
......
/*
* Copyright (C) 2015 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Author: Shobhit Kumar <shobhit.kumar@intel.com>
*/
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/intel_soc_pmic.h>
#include <linux/pwm.h>
#define PWM0_CLK_DIV 0x4B
#define PWM_OUTPUT_ENABLE BIT(7)
#define PWM_DIV_CLK_0 0x00 /* DIVIDECLK = BASECLK */
#define PWM_DIV_CLK_100 0x63 /* DIVIDECLK = BASECLK/100 */
#define PWM_DIV_CLK_128 0x7F /* DIVIDECLK = BASECLK/128 */
#define PWM0_DUTY_CYCLE 0x4E
#define BACKLIGHT_EN 0x51
#define PWM_MAX_LEVEL 0xFF
#define PWM_BASE_CLK 6000000 /* 6 MHz */
#define PWM_MAX_PERIOD_NS 21333 /* 46.875KHz */
/**
* struct crystalcove_pwm - Crystal Cove PWM controller
* @chip: the abstract pwm_chip structure.
* @regmap: the regmap from the parent device.
*/
struct crystalcove_pwm {
struct pwm_chip chip;
struct regmap *regmap;
};
static inline struct crystalcove_pwm *to_crc_pwm(struct pwm_chip *pc)
{
return container_of(pc, struct crystalcove_pwm, chip);
}
static int crc_pwm_enable(struct pwm_chip *c, struct pwm_device *pwm)
{
struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 1);
return 0;
}
static void crc_pwm_disable(struct pwm_chip *c, struct pwm_device *pwm)
{
struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
regmap_write(crc_pwm->regmap, BACKLIGHT_EN, 0);
}
static int crc_pwm_config(struct pwm_chip *c, struct pwm_device *pwm,
int duty_ns, int period_ns)
{
struct crystalcove_pwm *crc_pwm = to_crc_pwm(c);
struct device *dev = crc_pwm->chip.dev;
int level;
if (period_ns > PWM_MAX_PERIOD_NS) {
dev_err(dev, "un-supported period_ns\n");
return -EINVAL;
}
if (pwm->period != period_ns) {
int clk_div;
/* changing the clk divisor, need to disable fisrt */
crc_pwm_disable(c, pwm);
clk_div = PWM_BASE_CLK * period_ns / NSEC_PER_SEC;
regmap_write(crc_pwm->regmap, PWM0_CLK_DIV,
clk_div | PWM_OUTPUT_ENABLE);
/* enable back */
crc_pwm_enable(c, pwm);
}
/* change the pwm duty cycle */
level = duty_ns * PWM_MAX_LEVEL / period_ns;
regmap_write(crc_pwm->regmap, PWM0_DUTY_CYCLE, level);
return 0;
}
static const struct pwm_ops crc_pwm_ops = {
.config = crc_pwm_config,
.enable = crc_pwm_enable,
.disable = crc_pwm_disable,
};
static int crystalcove_pwm_probe(struct platform_device *pdev)
{
struct crystalcove_pwm *pwm;
struct device *dev = pdev->dev.parent;
struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
if (!pwm)
return -ENOMEM;
pwm->chip.dev = &pdev->dev;
pwm->chip.ops = &crc_pwm_ops;
pwm->chip.base = -1;
pwm->chip.npwm = 1;
/* get the PMIC regmap */
pwm->regmap = pmic->regmap;
platform_set_drvdata(pdev, pwm);
return pwmchip_add(&pwm->chip);
}
static int crystalcove_pwm_remove(struct platform_device *pdev)
{
struct crystalcove_pwm *pwm = platform_get_drvdata(pdev);
return pwmchip_remove(&pwm->chip);
}
static struct platform_driver crystalcove_pwm_driver = {
.probe = crystalcove_pwm_probe,
.remove = crystalcove_pwm_remove,
.driver = {
.name = "crystal_cove_pwm",
},
};
builtin_platform_driver(crystalcove_pwm_driver);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment