Commit a48b2362 authored by Svetlana Orlik's avatar Svetlana Orlik Committed by Greg Kroah-Hartman

staging: iio: accel: adis16203: Fix 'line over 80 characters' warning

Many of the comments in the same lines with #define
caused checkpatch warning 'line over 80 characters'.

Move all such comments to line before #define.
This style is already used in some other .h files in accel:

Add blank lines after #define to improve readability.
Signed-off-by: default avatarSvetlana Orlik <sveta.orlik.code@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 81da8a89
......@@ -3,45 +3,111 @@
#define ADIS16203_STARTUP_DELAY 220 /* ms */
#define ADIS16203_FLASH_CNT 0x00 /* Flash memory write count */
#define ADIS16203_SUPPLY_OUT 0x02 /* Output, power supply */
#define ADIS16203_AUX_ADC 0x08 /* Output, auxiliary ADC input */
#define ADIS16203_TEMP_OUT 0x0A /* Output, temperature */
#define ADIS16203_XINCL_OUT 0x0C /* Output, x-axis inclination */
#define ADIS16203_YINCL_OUT 0x0E /* Output, y-axis inclination */
#define ADIS16203_INCL_NULL 0x18 /* Incline null calibration */
#define ADIS16203_ALM_MAG1 0x20 /* Alarm 1 amplitude threshold */
#define ADIS16203_ALM_MAG2 0x22 /* Alarm 2 amplitude threshold */
#define ADIS16203_ALM_SMPL1 0x24 /* Alarm 1, sample period */
#define ADIS16203_ALM_SMPL2 0x26 /* Alarm 2, sample period */
#define ADIS16203_ALM_CTRL 0x28 /* Alarm control */
#define ADIS16203_AUX_DAC 0x30 /* Auxiliary DAC data */
#define ADIS16203_GPIO_CTRL 0x32 /* General-purpose digital input/output control */
#define ADIS16203_MSC_CTRL 0x34 /* Miscellaneous control */
#define ADIS16203_SMPL_PRD 0x36 /* Internal sample period (rate) control */
#define ADIS16203_AVG_CNT 0x38 /* Operation, filter configuration */
#define ADIS16203_SLP_CNT 0x3A /* Operation, sleep mode control */
#define ADIS16203_DIAG_STAT 0x3C /* Diagnostics, system status register */
#define ADIS16203_GLOB_CMD 0x3E /* Operation, system command register */
/* Flash memory write count */
#define ADIS16203_FLASH_CNT 0x00
/* Output, power supply */
#define ADIS16203_SUPPLY_OUT 0x02
/* Output, auxiliary ADC input */
#define ADIS16203_AUX_ADC 0x08
/* Output, temperature */
#define ADIS16203_TEMP_OUT 0x0A
/* Output, x-axis inclination */
#define ADIS16203_XINCL_OUT 0x0C
/* Output, y-axis inclination */
#define ADIS16203_YINCL_OUT 0x0E
/* Incline null calibration */
#define ADIS16203_INCL_NULL 0x18
/* Alarm 1 amplitude threshold */
#define ADIS16203_ALM_MAG1 0x20
/* Alarm 2 amplitude threshold */
#define ADIS16203_ALM_MAG2 0x22
/* Alarm 1, sample period */
#define ADIS16203_ALM_SMPL1 0x24
/* Alarm 2, sample period */
#define ADIS16203_ALM_SMPL2 0x26
/* Alarm control */
#define ADIS16203_ALM_CTRL 0x28
/* Auxiliary DAC data */
#define ADIS16203_AUX_DAC 0x30
/* General-purpose digital input/output control */
#define ADIS16203_GPIO_CTRL 0x32
/* Miscellaneous control */
#define ADIS16203_MSC_CTRL 0x34
/* Internal sample period (rate) control */
#define ADIS16203_SMPL_PRD 0x36
/* Operation, filter configuration */
#define ADIS16203_AVG_CNT 0x38
/* Operation, sleep mode control */
#define ADIS16203_SLP_CNT 0x3A
/* Diagnostics, system status register */
#define ADIS16203_DIAG_STAT 0x3C
/* Operation, system command register */
#define ADIS16203_GLOB_CMD 0x3E
/* MSC_CTRL */
#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST BIT(10) /* Self-test at power-on: 1 = disabled, 0 = enabled */
#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN BIT(9) /* Reverses rotation of both inclination outputs */
#define ADIS16203_MSC_CTRL_SELF_TEST_EN BIT(8) /* Self-test enable */
#define ADIS16203_MSC_CTRL_DATA_RDY_EN BIT(2) /* Data-ready enable: 1 = enabled, 0 = disabled */
#define ADIS16203_MSC_CTRL_ACTIVE_HIGH BIT(1) /* Data-ready polarity: 1 = active high, 0 = active low */
#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1 BIT(0) /* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
/* Self-test at power-on: 1 = disabled, 0 = enabled */
#define ADIS16203_MSC_CTRL_PWRUP_SELF_TEST BIT(10)
/* Reverses rotation of both inclination outputs */
#define ADIS16203_MSC_CTRL_REVERSE_ROT_EN BIT(9)
/* Self-test enable */
#define ADIS16203_MSC_CTRL_SELF_TEST_EN BIT(8)
/* Data-ready enable: 1 = enabled, 0 = disabled */
#define ADIS16203_MSC_CTRL_DATA_RDY_EN BIT(2)
/* Data-ready polarity: 1 = active high, 0 = active low */
#define ADIS16203_MSC_CTRL_ACTIVE_HIGH BIT(1)
/* Data-ready line selection: 1 = DIO1, 0 = DIO0 */
#define ADIS16203_MSC_CTRL_DATA_RDY_DIO1 BIT(0)
/* DIAG_STAT */
#define ADIS16203_DIAG_STAT_ALARM2 BIT(9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
#define ADIS16203_DIAG_STAT_ALARM1 BIT(8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error flag */
#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT 3 /* SPI communications failure */
#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT 2 /* Flash update failure */
#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT 1 /* Power supply above 3.625 V */
#define ADIS16203_DIAG_STAT_POWER_LOW_BIT 0 /* Power supply below 3.15 V */
/* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
#define ADIS16203_DIAG_STAT_ALARM2 BIT(9)
/* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
#define ADIS16203_DIAG_STAT_ALARM1 BIT(8)
/* Self-test diagnostic error flag */
#define ADIS16203_DIAG_STAT_SELFTEST_FAIL_BIT 5
/* SPI communications failure */
#define ADIS16203_DIAG_STAT_SPI_FAIL_BIT 3
/* Flash update failure */
#define ADIS16203_DIAG_STAT_FLASH_UPT_BIT 2
/* Power supply above 3.625 V */
#define ADIS16203_DIAG_STAT_POWER_HIGH_BIT 1
/* Power supply below 3.15 V */
#define ADIS16203_DIAG_STAT_POWER_LOW_BIT 0
/* GLOB_CMD */
#define ADIS16203_GLOB_CMD_SW_RESET BIT(7)
#define ADIS16203_GLOB_CMD_CLEAR_STAT BIT(4)
#define ADIS16203_GLOB_CMD_FACTORY_CAL BIT(1)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment