Commit a580516d authored by Ville Syrjälä's avatar Ville Syrjälä Committed by Daniel Vetter

drm/i915: s/dpio_lock/sb_lock/

Rename dpio_lock to sb_lock to inform the reader that its primary
purpose is to protect the sideband mailbox rather than some DPIO
state.
Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: default avatarJani Nikula <jani.nikula@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent b12ce1d8
......@@ -814,7 +814,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
spin_lock_init(&dev_priv->uncore.lock);
spin_lock_init(&dev_priv->mm.object_stat_lock);
spin_lock_init(&dev_priv->mmio_flip_lock);
mutex_init(&dev_priv->dpio_lock);
mutex_init(&dev_priv->sb_lock);
mutex_init(&dev_priv->modeset_restore_lock);
mutex_init(&dev_priv->csr_lock);
......
......@@ -1666,8 +1666,8 @@ struct drm_i915_private {
/* To control wakeup latency, e.g. for irq-driven dp aux transfers. */
struct pm_qos_request pm_qos;
/* DPIO indirect register protection */
struct mutex dpio_lock;
/* Sideband mailbox protection */
struct mutex sb_lock;
/** Cached value of IMR to avoid reads in updating the bitfield */
union {
......
......@@ -1140,9 +1140,9 @@ static void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
u32 val;
bool cur_state;
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
cur_state = val & DSI_PLL_VCO_EN;
I915_STATE_WARN(cur_state != state,
......@@ -1661,7 +1661,7 @@ static void chv_enable_pll(struct intel_crtc *crtc,
BUG_ON(!IS_CHERRYVIEW(dev_priv->dev));
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
/* Enable back the 10bit clock to display controller */
tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
......@@ -1684,7 +1684,7 @@ static void chv_enable_pll(struct intel_crtc *crtc,
I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
POSTING_READ(DPLL_MD(pipe));
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
static int intel_num_dvo_pipes(struct drm_device *dev)
......@@ -1826,7 +1826,7 @@ static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
I915_WRITE(DPLL(pipe), val);
POSTING_READ(DPLL(pipe));
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
/* Disable 10bit clock to display controller */
val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
......@@ -1844,7 +1844,7 @@ static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW1_CH1, val);
}
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
......@@ -3939,7 +3939,7 @@ static void lpt_program_iclkip(struct drm_crtc *crtc)
u32 divsel, phaseinc, auxdiv, phasedir = 0;
u32 temp;
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
/* It is necessary to ungate the pixclk gate prior to programming
* the divisors, and gate it back when it is done.
......@@ -4016,7 +4016,7 @@ static void lpt_program_iclkip(struct drm_crtc *crtc)
I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
......@@ -5728,10 +5728,10 @@ static int valleyview_get_vco(struct drm_i915_private *dev_priv)
int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
/* Obtain SKU information */
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
CCK_FUSE_HPLL_FREQ_MASK;
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
return vco_freq[hpll_freq] * 1000;
}
......@@ -5785,7 +5785,7 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
/* adjust cdclk divider */
val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
val &= ~DISPLAY_FREQUENCY_VALUES;
......@@ -5796,10 +5796,10 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
DISPLAY_FREQUENCY_STATUS) == (divider << DISPLAY_FREQUENCY_STATUS_SHIFT),
50))
DRM_ERROR("timed out waiting for CDclk change\n");
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
/* adjust self-refresh exit latency value */
val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
val &= ~0x7f;
......@@ -5813,7 +5813,7 @@ static void valleyview_set_cdclk(struct drm_device *dev, int cdclk)
else
val |= 3000 / 250; /* 3.0 usec */
vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
vlv_update_cdclk(dev);
}
......@@ -6741,9 +6741,9 @@ static int valleyview_get_display_clock_speed(struct drm_device *dev)
if (dev_priv->hpll_freq == 0)
dev_priv->hpll_freq = valleyview_get_vco(dev_priv);
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
divider = val & DISPLAY_FREQUENCY_VALUES;
......@@ -7085,7 +7085,7 @@ static void vlv_prepare_pll(struct intel_crtc *crtc,
u32 bestn, bestm1, bestm2, bestp1, bestp2;
u32 coreclk, reg_val;
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
bestn = pipe_config->dpll.n;
bestm1 = pipe_config->dpll.m1;
......@@ -7163,7 +7163,7 @@ static void vlv_prepare_pll(struct intel_crtc *crtc,
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
static void chv_update_pll(struct intel_crtc *crtc,
......@@ -7208,7 +7208,7 @@ static void chv_prepare_pll(struct intel_crtc *crtc,
I915_WRITE(dpll_reg,
pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
/* p1 and p2 divider */
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
......@@ -7281,7 +7281,7 @@ static void chv_prepare_pll(struct intel_crtc *crtc,
vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
DPIO_AFC_RECAL);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
/**
......@@ -7782,9 +7782,9 @@ static void vlv_crtc_clock_get(struct intel_crtc *crtc,
if (!(pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE))
return;
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
clock.m2 = mdiv & DPIO_M2DIV_MASK;
......@@ -7878,12 +7878,12 @@ static void chv_crtc_clock_get(struct intel_crtc *crtc,
u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2;
int refclk = 100000;
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
cmn_dw13 = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW13(port));
pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port));
pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port));
pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port));
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0;
clock.m2 = ((pll_dw0 & 0xff) << 22) | (pll_dw2 & 0x3fffff);
......@@ -8249,7 +8249,7 @@ static void lpt_enable_clkout_dp(struct drm_device *dev, bool with_spread,
with_fdi, "LP PCH doesn't have FDI\n"))
with_fdi = false;
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
tmp &= ~SBI_SSCCTL_DISABLE;
......@@ -8275,7 +8275,7 @@ static void lpt_enable_clkout_dp(struct drm_device *dev, bool with_spread,
tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
/* Sequence to disable CLKOUT_DP */
......@@ -8284,7 +8284,7 @@ static void lpt_disable_clkout_dp(struct drm_device *dev)
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t reg, tmp;
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
reg = (dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) ?
SBI_GEN0 : SBI_DBUFF0;
......@@ -8303,7 +8303,7 @@ static void lpt_disable_clkout_dp(struct drm_device *dev)
intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
}
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
static void lpt_init_pch_refclk(struct drm_device *dev)
......
......@@ -2355,7 +2355,7 @@ static void chv_post_disable_dp(struct intel_encoder *encoder)
intel_dp_link_down(intel_dp);
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
/* Propagate soft reset to data lane reset */
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch));
......@@ -2374,7 +2374,7 @@ static void chv_post_disable_dp(struct intel_encoder *encoder)
val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
static void
......@@ -2671,7 +2671,7 @@ static void vlv_pre_enable_dp(struct intel_encoder *encoder)
int pipe = intel_crtc->pipe;
u32 val;
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(port));
val = 0;
......@@ -2684,7 +2684,7 @@ static void vlv_pre_enable_dp(struct intel_encoder *encoder)
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW14(port), 0x00760018);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
intel_enable_dp(encoder);
}
......@@ -2702,7 +2702,7 @@ static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder)
intel_dp_prepare(encoder);
/* Program Tx lane resets to default */
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port),
DPIO_PCS_TX_LANE2_RESET |
DPIO_PCS_TX_LANE1_RESET);
......@@ -2716,7 +2716,7 @@ static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder)
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW12(port), 0x00750f00);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW11(port), 0x00001500);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW14(port), 0x40400000);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
static void chv_pre_enable_dp(struct intel_encoder *encoder)
......@@ -2732,7 +2732,7 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder)
int data, i, stagger;
u32 val;
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
/* allow hardware to manage TX FIFO reset source */
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch));
......@@ -2802,7 +2802,7 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder)
DPIO_TX1_STAGGER_MULT(7) |
DPIO_TX2_STAGGER_MULT(5));
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
intel_enable_dp(encoder);
}
......@@ -2820,7 +2820,7 @@ static void chv_dp_pre_pll_enable(struct intel_encoder *encoder)
intel_dp_prepare(encoder);
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
/* program left/right clock distribution */
if (pipe != PIPE_B) {
......@@ -2870,7 +2870,7 @@ static void chv_dp_pre_pll_enable(struct intel_encoder *encoder)
val |= CHV_CMN_USEDCLKCHANNEL;
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
/*
......@@ -3095,7 +3095,7 @@ static uint32_t vlv_signal_levels(struct intel_dp *intel_dp)
return 0;
}
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x00000000);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW4(port), demph_reg_value);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW2(port),
......@@ -3104,7 +3104,7 @@ static uint32_t vlv_signal_levels(struct intel_dp *intel_dp)
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW11(port), 0x00030000);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), preemph_reg_value);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), 0x80000000);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
return 0;
}
......@@ -3191,7 +3191,7 @@ static uint32_t chv_signal_levels(struct intel_dp *intel_dp)
return 0;
}
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
/* Clear calc init */
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
......@@ -3278,7 +3278,7 @@ static uint32_t chv_signal_levels(struct intel_dp *intel_dp)
val |= DPIO_LRC_BYPASS;
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, val);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
return 0;
}
......
......@@ -239,7 +239,7 @@ static int dpi_send_cmd(struct intel_dsi *intel_dsi, u32 cmd, bool hs,
static void band_gap_reset(struct drm_i915_private *dev_priv)
{
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
vlv_flisdsi_write(dev_priv, 0x08, 0x0001);
vlv_flisdsi_write(dev_priv, 0x0F, 0x0005);
......@@ -248,7 +248,7 @@ static void band_gap_reset(struct drm_i915_private *dev_priv)
vlv_flisdsi_write(dev_priv, 0x0F, 0x0000);
vlv_flisdsi_write(dev_priv, 0x08, 0x0000);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
static inline bool is_vid_mode(struct intel_dsi *intel_dsi)
......@@ -346,11 +346,11 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder)
DRM_DEBUG_KMS("\n");
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
/* program rcomp for compliance, reduce from 50 ohms to 45 ohms
* needed everytime after power gate */
vlv_flisdsi_write(dev_priv, 0x04, 0x0004);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
/* bandgap reset is needed after everytime we do power gate */
band_gap_reset(dev_priv);
......
......@@ -212,7 +212,7 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
function = gtable[gpio].function_reg;
pad = gtable[gpio].pad_reg;
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
if (!gtable[gpio].init) {
/* program the function */
/* FIXME: remove constant below */
......@@ -224,7 +224,7 @@ static const u8 *mipi_exec_gpio(struct intel_dsi *intel_dsi, const u8 *data)
/* pull up/down */
vlv_gpio_nc_write(dev_priv, pad, val);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
return data;
}
......
......@@ -244,7 +244,7 @@ void vlv_enable_dsi_pll(struct intel_encoder *encoder)
DRM_DEBUG_KMS("\n");
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
vlv_configure_dsi_pll(encoder);
......@@ -258,11 +258,11 @@ void vlv_enable_dsi_pll(struct intel_encoder *encoder)
if (wait_for(vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL) &
DSI_PLL_LOCK, 20)) {
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
DRM_ERROR("DSI PLL lock failed\n");
return;
}
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
DRM_DEBUG_KMS("DSI PLL locked\n");
}
......@@ -274,14 +274,14 @@ void vlv_disable_dsi_pll(struct intel_encoder *encoder)
DRM_DEBUG_KMS("\n");
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
tmp = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
tmp &= ~DSI_PLL_VCO_EN;
tmp |= DSI_PLL_LDO_GATE;
vlv_cck_write(dev_priv, CCK_REG_DSI_PLL_CONTROL, tmp);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
static void assert_bpp_mismatch(int pixel_format, int pipe_bpp)
......@@ -319,10 +319,10 @@ u32 vlv_get_dsi_pclk(struct intel_encoder *encoder, int pipe_bpp)
DRM_DEBUG_KMS("\n");
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
pll_ctl = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
pll_div = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_DIVIDER);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
/* mask out other bits and extract the P1 divisor */
pll_ctl &= DSI_PLL_P1_POST_DIV_MASK;
......
......@@ -1293,7 +1293,7 @@ static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
u32 val;
/* Enable clock channels for this port */
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW8(port));
val = 0;
if (pipe)
......@@ -1316,7 +1316,7 @@ static void vlv_hdmi_pre_enable(struct intel_encoder *encoder)
/* Program lane clock */
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW14(port), 0x00760018);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW23(port), 0x00400888);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
intel_hdmi->set_infoframes(&encoder->base,
intel_crtc->config->has_hdmi_sink,
......@@ -1340,7 +1340,7 @@ static void vlv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
intel_hdmi_prepare(encoder);
/* Program Tx lane resets to default */
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port),
DPIO_PCS_TX_LANE2_RESET |
DPIO_PCS_TX_LANE1_RESET);
......@@ -1357,7 +1357,7 @@ static void vlv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW9(port), 0x00002000);
vlv_dpio_write(dev_priv, pipe, VLV_TX_DW5(port), DPIO_TX_OCALINIT_EN);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
static void chv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
......@@ -1373,7 +1373,7 @@ static void chv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
intel_hdmi_prepare(encoder);
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
/* program left/right clock distribution */
if (pipe != PIPE_B) {
......@@ -1423,7 +1423,7 @@ static void chv_hdmi_pre_pll_enable(struct intel_encoder *encoder)
val |= CHV_CMN_USEDCLKCHANNEL;
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW19(ch), val);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
static void vlv_hdmi_post_disable(struct intel_encoder *encoder)
......@@ -1436,10 +1436,10 @@ static void vlv_hdmi_post_disable(struct intel_encoder *encoder)
int pipe = intel_crtc->pipe;
/* Reset lanes to avoid HDMI flicker (VLV w/a) */
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port), 0x00000000);
vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW1(port), 0x00e00060);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
static void chv_hdmi_post_disable(struct intel_encoder *encoder)
......@@ -1453,7 +1453,7 @@ static void chv_hdmi_post_disable(struct intel_encoder *encoder)
enum pipe pipe = intel_crtc->pipe;
u32 val;
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
/* Propagate soft reset to data lane reset */
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW1(ch));
......@@ -1472,7 +1472,7 @@ static void chv_hdmi_post_disable(struct intel_encoder *encoder)
val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET);
vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW0(ch), val);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
......@@ -1490,7 +1490,7 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
int data, i, stagger;
u32 val;
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
/* allow hardware to manage TX FIFO reset source */
val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch));
......@@ -1633,7 +1633,7 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
val |= DPIO_LRC_BYPASS;
vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, val);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
intel_hdmi->set_infoframes(&encoder->base,
intel_crtc->config->has_hdmi_sink,
......
......@@ -4964,9 +4964,9 @@ static void cherryview_init_gt_powersave(struct drm_device *dev)
mutex_lock(&dev_priv->rps.hw_lock);
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
val = vlv_cck_read(dev_priv, CCK_FUSE_REG);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
switch ((val >> 2) & 0x7) {
case 0:
......
......@@ -49,7 +49,7 @@ static int vlv_sideband_rw(struct drm_i915_private *dev_priv, u32 devfn,
(port << IOSF_PORT_SHIFT) | (be << IOSF_BYTE_ENABLES_SHIFT) |
(bar << IOSF_BAR_SHIFT);
WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
WARN_ON(!mutex_is_locked(&dev_priv->sb_lock));
if (wait_for((I915_READ(VLV_IOSF_DOORBELL_REQ) & IOSF_SB_BUSY) == 0, 5)) {
DRM_DEBUG_DRIVER("IOSF sideband idle wait (%s) timed out\n",
......@@ -81,10 +81,10 @@ u32 vlv_punit_read(struct drm_i915_private *dev_priv, u32 addr)
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
vlv_sideband_rw(dev_priv, PCI_DEVFN(0, 0), IOSF_PORT_PUNIT,
SB_CRRDDA_NP, addr, &val);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
return val;
}
......@@ -93,10 +93,10 @@ void vlv_punit_write(struct drm_i915_private *dev_priv, u32 addr, u32 val)
{
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
vlv_sideband_rw(dev_priv, PCI_DEVFN(0, 0), IOSF_PORT_PUNIT,
SB_CRWRDA_NP, addr, &val);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
}
u32 vlv_bunit_read(struct drm_i915_private *dev_priv, u32 reg)
......@@ -121,10 +121,10 @@ u32 vlv_nc_read(struct drm_i915_private *dev_priv, u8 addr)
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
mutex_lock(&dev_priv->dpio_lock);
mutex_lock(&dev_priv->sb_lock);
vlv_sideband_rw(dev_priv, PCI_DEVFN(0, 0), IOSF_PORT_NC,
SB_CRRDDA_NP, addr, &val);
mutex_unlock(&dev_priv->dpio_lock);
mutex_unlock(&dev_priv->sb_lock);
return val;
}
......@@ -213,7 +213,7 @@ u32 intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg,
enum intel_sbi_destination destination)
{
u32 value = 0;
WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
WARN_ON(!mutex_is_locked(&dev_priv->sb_lock));
if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
100)) {
......@@ -243,7 +243,7 @@ void intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value,
{
u32 tmp;
WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock));
WARN_ON(!mutex_is_locked(&dev_priv->sb_lock));
if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0,
100)) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment