Commit a69929c7 authored by Axel Lin's avatar Axel Lin Committed by Mark Brown

regulator: fan53555: Clean up unneeded fields from struct fan53555_device_info

The *regmap and *rdev can be replaced by local variables.
The slew_rate is no longer used since commit dd7e71fb
("regulator: fan53555: use set_ramp_delay to set the ramp up slew rate").
Signed-off-by: default avatarAxel Lin <axel.lin@ingics.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent b2745697
......@@ -91,10 +91,8 @@ enum {
struct fan53555_device_info {
enum fan53555_vendor vendor;
struct regmap *regmap;
struct device *dev;
struct regulator_desc desc;
struct regulator_dev *rdev;
struct regulator_init_data *regulator;
/* IC Type and Rev */
int chip_id;
......@@ -106,8 +104,6 @@ struct fan53555_device_info {
unsigned int vsel_min;
unsigned int vsel_step;
unsigned int vsel_count;
/* Voltage slew rate limiting */
unsigned int slew_rate;
/* Mode */
unsigned int mode_reg;
unsigned int mode_mask;
......@@ -125,7 +121,7 @@ static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
ret = regulator_map_voltage_linear(rdev, uV, uV);
if (ret < 0)
return ret;
ret = regmap_update_bits(di->regmap, di->sleep_reg,
ret = regmap_update_bits(rdev->regmap, di->sleep_reg,
di->desc.vsel_mask, ret);
if (ret < 0)
return ret;
......@@ -140,7 +136,7 @@ static int fan53555_set_suspend_enable(struct regulator_dev *rdev)
{
struct fan53555_device_info *di = rdev_get_drvdata(rdev);
return regmap_update_bits(di->regmap, di->sleep_reg,
return regmap_update_bits(rdev->regmap, di->sleep_reg,
VSEL_BUCK_EN, VSEL_BUCK_EN);
}
......@@ -148,7 +144,7 @@ static int fan53555_set_suspend_disable(struct regulator_dev *rdev)
{
struct fan53555_device_info *di = rdev_get_drvdata(rdev);
return regmap_update_bits(di->regmap, di->sleep_reg,
return regmap_update_bits(rdev->regmap, di->sleep_reg,
VSEL_BUCK_EN, 0);
}
......@@ -158,11 +154,11 @@ static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode)
switch (mode) {
case REGULATOR_MODE_FAST:
regmap_update_bits(di->regmap, di->mode_reg,
regmap_update_bits(rdev->regmap, di->mode_reg,
di->mode_mask, di->mode_mask);
break;
case REGULATOR_MODE_NORMAL:
regmap_update_bits(di->regmap, di->vol_reg, di->mode_mask, 0);
regmap_update_bits(rdev->regmap, di->vol_reg, di->mode_mask, 0);
break;
default:
return -EINVAL;
......@@ -176,7 +172,7 @@ static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
unsigned int val;
int ret = 0;
ret = regmap_read(di->regmap, di->mode_reg, &val);
ret = regmap_read(rdev->regmap, di->mode_reg, &val);
if (ret < 0)
return ret;
if (val & di->mode_mask)
......@@ -213,7 +209,7 @@ static int fan53555_set_ramp(struct regulator_dev *rdev, int ramp)
return -EINVAL;
}
return regmap_update_bits(di->regmap, FAN53555_CONTROL,
return regmap_update_bits(rdev->regmap, FAN53555_CONTROL,
CTL_SLEW_MASK, regval << CTL_SLEW_SHIFT);
}
......@@ -396,6 +392,7 @@ static int fan53555_regulator_register(struct fan53555_device_info *di,
struct regulator_config *config)
{
struct regulator_desc *rdesc = &di->desc;
struct regulator_dev *rdev;
rdesc->name = "fan53555-reg";
rdesc->supply_name = "vin";
......@@ -410,8 +407,8 @@ static int fan53555_regulator_register(struct fan53555_device_info *di,
rdesc->vsel_mask = di->vsel_count - 1;
rdesc->owner = THIS_MODULE;
di->rdev = devm_regulator_register(di->dev, &di->desc, config);
return PTR_ERR_OR_ZERO(di->rdev);
rdev = devm_regulator_register(di->dev, &di->desc, config);
return PTR_ERR_OR_ZERO(rdev);
}
static const struct regmap_config fan53555_regmap_config = {
......@@ -466,6 +463,7 @@ static int fan53555_regulator_probe(struct i2c_client *client,
struct fan53555_device_info *di;
struct fan53555_platform_data *pdata;
struct regulator_config config = { };
struct regmap *regmap;
unsigned int val;
int ret;
......@@ -502,22 +500,22 @@ static int fan53555_regulator_probe(struct i2c_client *client,
di->vendor = id->driver_data;
}
di->regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config);
if (IS_ERR(di->regmap)) {
regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config);
if (IS_ERR(regmap)) {
dev_err(&client->dev, "Failed to allocate regmap!\n");
return PTR_ERR(di->regmap);
return PTR_ERR(regmap);
}
di->dev = &client->dev;
i2c_set_clientdata(client, di);
/* Get chip ID */
ret = regmap_read(di->regmap, FAN53555_ID1, &val);
ret = regmap_read(regmap, FAN53555_ID1, &val);
if (ret < 0) {
dev_err(&client->dev, "Failed to get chip ID!\n");
return ret;
}
di->chip_id = val & DIE_ID;
/* Get chip revision */
ret = regmap_read(di->regmap, FAN53555_ID2, &val);
ret = regmap_read(regmap, FAN53555_ID2, &val);
if (ret < 0) {
dev_err(&client->dev, "Failed to get chip Rev!\n");
return ret;
......@@ -534,7 +532,7 @@ static int fan53555_regulator_probe(struct i2c_client *client,
/* Register regulator */
config.dev = di->dev;
config.init_data = di->regulator;
config.regmap = di->regmap;
config.regmap = regmap;
config.driver_data = di;
config.of_node = np;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment