Commit a6b623e0 authored by Alexander Duyck's avatar Alexander Duyck Committed by David S. Miller

igb: move vf init into a seperate function

This patch moves VF initialization into a seperate function to help improve
the readability of igb_probe.
Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 51466239
......@@ -1409,46 +1409,6 @@ static int __devinit igb_probe(struct pci_dev *pdev,
if (err)
goto err_sw_init;
#ifdef CONFIG_PCI_IOV
/* since iov functionality isn't critical to base device function we
* can accept failure. If it fails we don't allow iov to be enabled */
if (hw->mac.type == e1000_82576) {
/* 82576 supports a maximum of 7 VFs in addition to the PF */
unsigned int num_vfs = (max_vfs > 7) ? 7 : max_vfs;
int i;
unsigned char mac_addr[ETH_ALEN];
if (num_vfs) {
adapter->vf_data = kcalloc(num_vfs,
sizeof(struct vf_data_storage),
GFP_KERNEL);
if (!adapter->vf_data) {
dev_err(&pdev->dev,
"Could not allocate VF private data - "
"IOV enable failed\n");
} else {
err = pci_enable_sriov(pdev, num_vfs);
if (!err) {
adapter->vfs_allocated_count = num_vfs;
dev_info(&pdev->dev,
"%d vfs allocated\n",
num_vfs);
for (i = 0;
i < adapter->vfs_allocated_count;
i++) {
random_ether_addr(mac_addr);
igb_set_vf_mac(adapter, i,
mac_addr);
}
} else {
kfree(adapter->vf_data);
adapter->vf_data = NULL;
}
}
}
}
#endif
/* setup the private structure */
err = igb_sw_init(adapter);
if (err)
......@@ -1771,6 +1731,54 @@ static void __devexit igb_remove(struct pci_dev *pdev)
pci_disable_device(pdev);
}
/**
* igb_probe_vfs - Initialize vf data storage and add VFs to pci config space
* @adapter: board private structure to initialize
*
* This function initializes the vf specific data storage and then attempts to
* allocate the VFs. The reason for ordering it this way is because it is much
* mor expensive time wise to disable SR-IOV than it is to allocate and free
* the memory for the VFs.
**/
static void __devinit igb_probe_vfs(struct igb_adapter * adapter)
{
#ifdef CONFIG_PCI_IOV
struct pci_dev *pdev = adapter->pdev;
if (adapter->vfs_allocated_count > 7)
adapter->vfs_allocated_count = 7;
if (adapter->vfs_allocated_count) {
adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
sizeof(struct vf_data_storage),
GFP_KERNEL);
/* if allocation failed then we do not support SR-IOV */
if (!adapter->vf_data) {
adapter->vfs_allocated_count = 0;
dev_err(&pdev->dev, "Unable to allocate memory for VF "
"Data Storage\n");
}
}
if (pci_enable_sriov(pdev, adapter->vfs_allocated_count)) {
kfree(adapter->vf_data);
adapter->vf_data = NULL;
#endif /* CONFIG_PCI_IOV */
adapter->vfs_allocated_count = 0;
#ifdef CONFIG_PCI_IOV
} else {
unsigned char mac_addr[ETH_ALEN];
int i;
dev_info(&pdev->dev, "%d vfs allocated\n",
adapter->vfs_allocated_count);
for (i = 0; i < adapter->vfs_allocated_count; i++) {
random_ether_addr(mac_addr);
igb_set_vf_mac(adapter, i, mac_addr);
}
}
#endif /* CONFIG_PCI_IOV */
}
/**
* igb_sw_init - Initialize general software structures (struct igb_adapter)
* @adapter: board private structure to initialize
......@@ -1795,13 +1803,19 @@ static int __devinit igb_sw_init(struct igb_adapter *adapter)
adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
/* This call may decrease the number of queues depending on
* interrupt mode. */
#ifdef CONFIG_PCI_IOV
if (hw->mac.type == e1000_82576)
adapter->vfs_allocated_count = max_vfs;
#endif /* CONFIG_PCI_IOV */
/* This call may decrease the number of queues */
if (igb_init_interrupt_scheme(adapter)) {
dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
return -ENOMEM;
}
igb_probe_vfs(adapter);
/* Explicitly disable IRQ since the NIC can be in any state. */
igb_irq_disable(adapter);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment