Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 platform changes from Ingo Molnar:
 "The main changes in this cycle were:

   - SGI UV updates (Andrew Banman)

   - Intel MID updates (Andy Shevchenko)

   - Initial Mellanox systems platform (Vadim Pasternak)"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/mellanox: Fix return value check in mlxplat_init()
  x86/platform/mellanox: Introduce support for Mellanox systems platform
  x86/platform/uv/BAU: Add UV4-specific functions
  x86/platform/uv/BAU: Fix payload queue setup on UV4 hardware
  x86/platform/uv/BAU: Disable software timeout on UV4 hardware
  x86/platform/uv/BAU: Populate ->uvhub_version with UV4 version information
  x86/platform/uv/BAU: Use generic function pointers
  x86/platform/uv/BAU: Add generic function pointers
  x86/platform/uv/BAU: Convert uv_physnodeaddr() use to uv_gpa_to_offset()
  x86/platform/uv/BAU: Clean up pq_init()
  x86/platform/uv/BAU: Clean up and update printks
  x86/platform/uv/BAU: Clean up vertical alignment
  x86/platform/intel-mid: Keep SRAM powered on at boot
  x86/platform/intel-mid: Add Intel Penwell to ID table
  x86/cpu: Rename Merrifield2 to Moorefield
  x86/platform/intel-mid: Implement power off sequence
  x86/platform/intel-mid: Enable SD card detection on Merrifield
  x86/platform/intel-mid: Enable WiFi on Intel Edison
  x86/platform/intel-mid: Run PWRMU command immediately

MAINTAINERS

@@ -7683,6 +7683,12 @@ W:	http://www.mellanox.com
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 F:	drivers/net/ethernet/mellanox/mlxsw/
 
+MELLANOX PLATFORM DRIVER
+M:      Vadim Pasternak <vadimp@mellanox.com>
+L:      platform-driver-x86@vger.kernel.org
+S:      Supported
+F:      arch/x86/platform/mellanox/mlx-platform.c
+
 SOFT-ROCE DRIVER (rxe)
 M:	Moni Shoua <monis@mellanox.com>
 L:	linux-rdma@vger.kernel.org

arch/x86/Kconfig

@@ -550,6 +550,18 @@ config X86_INTEL_QUARK
 	  Say Y here if you have a Quark based system such as the Arduino
 	  compatible Intel Galileo.
 
+config MLX_PLATFORM
+	tristate "Mellanox Technologies platform support"
+	depends on X86_64
+	depends on X86_EXTENDED_PLATFORM
+	---help---
+	  This option enables system support for the Mellanox Technologies
+	  platform.
+
+	  Say Y here if you are building a kernel for Mellanox system.
+
+	  Otherwise, say N.
+
 config X86_INTEL_LPSS
 	bool "Intel Low Power Subsystem Support"
 	depends on X86 && ACPI

arch/x86/include/asm/intel-family.h

@@ -56,8 +56,8 @@
 #define INTEL_FAM6_ATOM_SILVERMONT1	0x37 /* BayTrail/BYT / Valleyview */
 #define INTEL_FAM6_ATOM_SILVERMONT2	0x4D /* Avaton/Rangely */
 #define INTEL_FAM6_ATOM_AIRMONT		0x4C /* CherryTrail / Braswell */
-#define INTEL_FAM6_ATOM_MERRIFIELD1	0x4A /* Tangier */
-#define INTEL_FAM6_ATOM_MERRIFIELD2	0x5A /* Annidale */
+#define INTEL_FAM6_ATOM_MERRIFIELD	0x4A /* Tangier */
+#define INTEL_FAM6_ATOM_MOOREFIELD	0x5A /* Annidale */
 #define INTEL_FAM6_ATOM_GOLDMONT	0x5C
 #define INTEL_FAM6_ATOM_DENVERTON	0x5F /* Goldmont Microserver */
 

arch/x86/include/asm/intel-mid.h

@@ -18,6 +18,8 @@
 extern int intel_mid_pci_init(void);
 extern int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state);
 
+extern void intel_mid_pwr_power_off(void);
+
 #define INTEL_MID_PWR_LSS_OFFSET	4
 #define INTEL_MID_PWR_LSS_TYPE		(1 << 7)
 

arch/x86/include/asm/intel_scu_ipc.h

@@ -3,6 +3,8 @@
 
 #include <linux/notifier.h>
 
+#define IPCMSG_COLD_OFF		0x80	/* Only for Tangier */
+
 #define IPCMSG_WARM_RESET	0xF0
 #define IPCMSG_COLD_RESET	0xF1
 #define IPCMSG_SOFT_RESET	0xF2

arch/x86/include/asm/uv/uv_bau.h

@@ -49,14 +49,12 @@
 #define UV_NET_ENDPOINT_INTD		(is_uv1_hub() ?			\
 			UV1_NET_ENDPOINT_INTD : UV2_NET_ENDPOINT_INTD)
 #define UV_DESC_PSHIFT			49
-#define UV_PAYLOADQ_PNODE_SHIFT		49
+#define UV_PAYLOADQ_GNODE_SHIFT		49
 #define UV_PTC_BASENAME			"sgi_uv/ptc_statistics"
 #define UV_BAU_BASENAME			"sgi_uv/bau_tunables"
 #define UV_BAU_TUNABLES_DIR		"sgi_uv"
 #define UV_BAU_TUNABLES_FILE		"bau_tunables"
 #define WHITESPACE			" \t\n"
-#define uv_mmask			((1UL << uv_hub_info->m_val) - 1)
-#define uv_physnodeaddr(x)		((__pa((unsigned long)(x)) & uv_mmask))
 #define cpubit_isset(cpu, bau_local_cpumask) \
 	test_bit((cpu), (bau_local_cpumask).bits)
 
@@ -387,6 +385,17 @@ struct uv2_3_bau_msg_header {
 	/* bits 127:120 */
 };
 
+/* Abstracted BAU functions */
+struct bau_operations {
+	unsigned long (*read_l_sw_ack)(void);
+	unsigned long (*read_g_sw_ack)(int pnode);
+	unsigned long (*bau_gpa_to_offset)(unsigned long vaddr);
+	void (*write_l_sw_ack)(unsigned long mmr);
+	void (*write_g_sw_ack)(int pnode, unsigned long mmr);
+	void (*write_payload_first)(int pnode, unsigned long mmr);
+	void (*write_payload_last)(int pnode, unsigned long mmr);
+};
+
 /*
  * The activation descriptor:
  * The format of the message to send, plus all accompanying control
@@ -655,6 +664,16 @@ static inline void write_gmmr_activation(int pnode, unsigned long mmr_image)
 	write_gmmr(pnode, UVH_LB_BAU_SB_ACTIVATION_CONTROL, mmr_image);
 }
 
+static inline void write_mmr_proc_payload_first(int pnode, unsigned long mmr_image)
+{
+	write_gmmr(pnode, UV4H_LB_PROC_INTD_QUEUE_FIRST, mmr_image);
+}
+
+static inline void write_mmr_proc_payload_last(int pnode, unsigned long mmr_image)
+{
+	write_gmmr(pnode, UV4H_LB_PROC_INTD_QUEUE_LAST, mmr_image);
+}
+
 static inline void write_mmr_payload_first(int pnode, unsigned long mmr_image)
 {
 	write_gmmr(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, mmr_image);
@@ -700,6 +719,26 @@ static inline unsigned long read_gmmr_sw_ack(int pnode)
 	return read_gmmr(pnode, UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE);
 }
 
+static inline void write_mmr_proc_sw_ack(unsigned long mr)
+{
+	uv_write_local_mmr(UV4H_LB_PROC_INTD_SOFT_ACK_CLEAR, mr);
+}
+
+static inline void write_gmmr_proc_sw_ack(int pnode, unsigned long mr)
+{
+	write_gmmr(pnode, UV4H_LB_PROC_INTD_SOFT_ACK_CLEAR, mr);
+}
+
+static inline unsigned long read_mmr_proc_sw_ack(void)
+{
+	return read_lmmr(UV4H_LB_PROC_INTD_SOFT_ACK_PENDING);
+}
+
+static inline unsigned long read_gmmr_proc_sw_ack(int pnode)
+{
+	return read_gmmr(pnode, UV4H_LB_PROC_INTD_SOFT_ACK_PENDING);
+}
+
 static inline void write_mmr_data_config(int pnode, unsigned long mr)
 {
 	uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, mr);

arch/x86/platform/Makefile

@@ -8,6 +8,7 @@ obj-y	+= iris/
 obj-y	+= intel/
 obj-y	+= intel-mid/
 obj-y	+= intel-quark/
+obj-y	+= mellanox/
 obj-y	+= olpc/
 obj-y	+= scx200/
 obj-y	+= sfi/

arch/x86/platform/atom/punit_atom_debug.c

@@ -155,7 +155,7 @@ static void punit_dbgfs_unregister(void)
 
 static const struct x86_cpu_id intel_punit_cpu_ids[] = {
 	ICPU(INTEL_FAM6_ATOM_SILVERMONT1, punit_device_byt),
-	ICPU(INTEL_FAM6_ATOM_MERRIFIELD1, punit_device_tng),
+	ICPU(INTEL_FAM6_ATOM_MERRIFIELD,  punit_device_tng),
 	ICPU(INTEL_FAM6_ATOM_AIRMONT,	  punit_device_cht),
 	{}
 };

arch/x86/platform/intel-mid/device_libs/Makefile

 # Family-Level Interface Shim (FLIS)
 obj-$(subst m,y,$(CONFIG_PINCTRL_MERRIFIELD)) += platform_mrfld_pinctrl.o
+# SDHCI Devices
+obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += platform_mrfld_sd.o
+# WiFi
+obj-$(subst m,y,$(CONFIG_BRCMFMAC_SDIO)) += platform_bcm43xx.o
 # IPC Devices
 obj-y += platform_ipc.o
 obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic.o

arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c

+/*
+ * platform_bcm43xx.c: bcm43xx platform data initilization file
+ *
+ * (C) Copyright 2016 Intel Corporation
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/sfi.h>
+
+#include <asm/intel-mid.h>
+
+#define WLAN_SFI_GPIO_IRQ_NAME		"WLAN-interrupt"
+#define WLAN_SFI_GPIO_ENABLE_NAME	"WLAN-enable"
+
+#define WLAN_DEV_NAME			"0000:00:01.3"
+
+static struct regulator_consumer_supply bcm43xx_vmmc_supply = {
+	.dev_name		= WLAN_DEV_NAME,
+	.supply			= "vmmc",
+};
+
+static struct regulator_init_data bcm43xx_vmmc_data = {
+	.constraints = {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &bcm43xx_vmmc_supply,
+};
+
+static struct fixed_voltage_config bcm43xx_vmmc = {
+	.supply_name		= "bcm43xx-vmmc-regulator",
+	/*
+	 * Announce 2.0V here to be compatible with SDIO specification. The
+	 * real voltage and signaling are still 1.8V.
+	 */
+	.microvolts		= 2000000,		/* 1.8V */
+	.gpio			= -EINVAL,
+	.startup_delay		= 250 * 1000,		/* 250ms */
+	.enable_high		= 1,			/* active high */
+	.enabled_at_boot	= 0,			/* disabled at boot */
+	.init_data		= &bcm43xx_vmmc_data,
+};
+
+static struct platform_device bcm43xx_vmmc_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= PLATFORM_DEVID_AUTO,
+	.dev = {
+		.platform_data	= &bcm43xx_vmmc,
+	},
+};
+
+static int __init bcm43xx_regulator_register(void)
+{
+	int ret;
+
+	bcm43xx_vmmc.gpio = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME);
+	ret = platform_device_register(&bcm43xx_vmmc_regulator);
+	if (ret) {
+		pr_err("%s: vmmc regulator register failed\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __init *bcm43xx_platform_data(void *info)
+{
+	int ret;
+
+	ret = bcm43xx_regulator_register();
+	if (ret)
+		return NULL;
+
+	pr_info("Using generic wifi platform data\n");
+
+	/* For now it's empty */
+	return NULL;
+}
+
+static const struct devs_id bcm43xx_clk_vmmc_dev_id __initconst = {
+	.name			= "bcm43xx_clk_vmmc",
+	.type			= SFI_DEV_TYPE_SD,
+	.get_platform_data	= &bcm43xx_platform_data,
+};
+
+sfi_device(bcm43xx_clk_vmmc_dev_id);

arch/x86/platform/intel-mid/device_libs/platform_mrfld_sd.c

+/*
+ * SDHCI platform data initilisation file
+ *
+ * (C) Copyright 2016 Intel Corporation
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <linux/mmc/sdhci-pci-data.h>
+
+#include <asm/intel-mid.h>
+
+#define INTEL_MRFLD_SD			2
+#define INTEL_MRFLD_SD_CD_GPIO		77
+
+static struct sdhci_pci_data mrfld_sdhci_pci_data = {
+	.rst_n_gpio	= -EINVAL,
+	.cd_gpio	= INTEL_MRFLD_SD_CD_GPIO,
+};
+
+static struct sdhci_pci_data *
+mrfld_sdhci_pci_get_data(struct pci_dev *pdev, int slotno)
+{
+	unsigned int func = PCI_FUNC(pdev->devfn);
+
+	if (func == INTEL_MRFLD_SD)
+		return &mrfld_sdhci_pci_data;
+
+	return NULL;
+}
+
+static int __init mrfld_sd_init(void)
+{
+	if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
+		return -ENODEV;
+
+	sdhci_pci_get_data = mrfld_sdhci_pci_get_data;
+	return 0;
+}
+arch_initcall(mrfld_sd_init);

arch/x86/platform/intel-mid/intel-mid.c

@@ -70,6 +70,11 @@ EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip);
 
 static void intel_mid_power_off(void)
 {
+	/* Shut down South Complex via PWRMU */
+	intel_mid_pwr_power_off();
+
+	/* Only for Tangier, the rest will ignore this command */
+	intel_scu_ipc_simple_command(IPCMSG_COLD_OFF, 1);
 };
 
 static void intel_mid_reboot(void)

arch/x86/platform/intel-mid/pwr.c

@@ -44,7 +44,19 @@
 /* Bits in PM_CMD */
 #define PM_CMD_CMD(x)		((x) << 0)
 #define PM_CMD_IOC		(1 << 8)
-#define PM_CMD_D3cold		(1 << 21)
+#define PM_CMD_CM_NOP		(0 << 9)
+#define PM_CMD_CM_IMMEDIATE	(1 << 9)
+#define PM_CMD_CM_DELAY		(2 << 9)
+#define PM_CMD_CM_TRIGGER	(3 << 9)
+
+/* System states */
+#define PM_CMD_SYS_STATE_S5	(5 << 16)
+
+/* Trigger variants */
+#define PM_CMD_CFG_TRIGGER_NC	(3 << 19)
+
+/* Message to wait for TRIGGER_NC case */
+#define TRIGGER_NC_MSG_2	(2 << 22)
 
 /* List of commands */
 #define CMD_SET_CFG		0x01
@@ -137,7 +149,7 @@ static int mid_pwr_wait(struct mid_pwr *pwr)
 
 static int mid_pwr_wait_for_cmd(struct mid_pwr *pwr, u8 cmd)
 {
-	writel(PM_CMD_CMD(cmd), pwr->regs + PM_CMD);
+	writel(PM_CMD_CMD(cmd) | PM_CMD_CM_IMMEDIATE, pwr->regs + PM_CMD);
 	return mid_pwr_wait(pwr);
 }
 
@@ -260,6 +272,20 @@ int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state)
 }
 EXPORT_SYMBOL_GPL(intel_mid_pci_set_power_state);
 
+void intel_mid_pwr_power_off(void)
+{
+	struct mid_pwr *pwr = midpwr;
+	u32 cmd = PM_CMD_SYS_STATE_S5 |
+		  PM_CMD_CMD(CMD_SET_CFG) |
+		  PM_CMD_CM_TRIGGER |
+		  PM_CMD_CFG_TRIGGER_NC |
+		  TRIGGER_NC_MSG_2;
+
+	/* Send command to SCU */
+	writel(cmd, pwr->regs + PM_CMD);
+	mid_pwr_wait(pwr);
+}
+
 int intel_mid_pwr_get_lss_id(struct pci_dev *pdev)
 {
 	int vndr;
@@ -354,7 +380,7 @@ static int mid_pwr_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return 0;
 }
 
-static int mid_set_initial_state(struct mid_pwr *pwr)
+static int mid_set_initial_state(struct mid_pwr *pwr, const u32 *states)
 {
 	unsigned int i, j;
 	int ret;
@@ -379,10 +405,10 @@ static int mid_set_initial_state(struct mid_pwr *pwr)
 	 * NOTE: The actual device mapping is provided by a platform at run
 	 * time using vendor capability of PCI configuration space.
 	 */
-	mid_pwr_set_state(pwr, 0, 0xffffffff);
-	mid_pwr_set_state(pwr, 1, 0xffffffff);
-	mid_pwr_set_state(pwr, 2, 0xffffffff);
-	mid_pwr_set_state(pwr, 3, 0xffffffff);
+	mid_pwr_set_state(pwr, 0, states[0]);
+	mid_pwr_set_state(pwr, 1, states[1]);
+	mid_pwr_set_state(pwr, 2, states[2]);
+	mid_pwr_set_state(pwr, 3, states[3]);
 
 	/* Send command to SCU */
 	ret = mid_pwr_wait_for_cmd(pwr, CMD_SET_CFG);
@@ -397,13 +423,41 @@ static int mid_set_initial_state(struct mid_pwr *pwr)
 	return 0;
 }
 
-static const struct mid_pwr_device_info mid_info = {
-	.set_initial_state = mid_set_initial_state,
+static int pnw_set_initial_state(struct mid_pwr *pwr)
+{
+	/* On Penwell SRAM must stay powered on */
+	const u32 states[] = {
+		0xf00fffff,		/* PM_SSC(0) */
+		0xffffffff,		/* PM_SSC(1) */
+		0xffffffff,		/* PM_SSC(2) */
+		0xffffffff,		/* PM_SSC(3) */
+	};
+	return mid_set_initial_state(pwr, states);
+}
+
+static int tng_set_initial_state(struct mid_pwr *pwr)
+{
+	const u32 states[] = {
+		0xffffffff,		/* PM_SSC(0) */
+		0xffffffff,		/* PM_SSC(1) */
+		0xffffffff,		/* PM_SSC(2) */
+		0xffffffff,		/* PM_SSC(3) */
+	};
+	return mid_set_initial_state(pwr, states);
+}
+
+static const struct mid_pwr_device_info pnw_info = {
+	.set_initial_state = pnw_set_initial_state,
+};
+
+static const struct mid_pwr_device_info tng_info = {
+	.set_initial_state = tng_set_initial_state,
 };
 
+/* This table should be in sync with the one in drivers/pci/pci-mid.c */
 static const struct pci_device_id mid_pwr_pci_ids[] = {
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PENWELL), (kernel_ulong_t)&mid_info },
-	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_TANGIER), (kernel_ulong_t)&mid_info },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PENWELL), (kernel_ulong_t)&pnw_info },
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_TANGIER), (kernel_ulong_t)&tng_info },
 	{}
 };
 

arch/x86/platform/mellanox/Makefile

+obj-$(CONFIG_MLX_PLATFORM)	+= mlx-platform.o

arch/x86/platform/mellanox/mlx-platform.c

+/*
+ * arch/x86/platform/mellanox/mlx-platform.c
+ * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2016 Vadim Pasternak <vadimp@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ *    contributors may be used to endorse or promote products derived from
+ *    this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/i2c-mux-reg.h>
+
+#define MLX_PLAT_DEVICE_NAME		"mlxplat"
+
+/* LPC bus IO offsets */
+#define MLXPLAT_CPLD_LPC_I2C_BASE_ADRR		0x2000
+#define MLXPLAT_CPLD_LPC_REG_BASE_ADRR		0x2500
+#define MLXPLAT_CPLD_LPC_IO_RANGE		0x100
+#define MLXPLAT_CPLD_LPC_I2C_CH1_OFF		0xdb
+#define MLXPLAT_CPLD_LPC_I2C_CH2_OFF		0xda
+#define MLXPLAT_CPLD_LPC_PIO_OFFSET		0x10000UL
+#define MLXPLAT_CPLD_LPC_REG1	((MLXPLAT_CPLD_LPC_REG_BASE_ADRR + \
+				  MLXPLAT_CPLD_LPC_I2C_CH1_OFF) | \
+				  MLXPLAT_CPLD_LPC_PIO_OFFSET)
+#define MLXPLAT_CPLD_LPC_REG2	((MLXPLAT_CPLD_LPC_REG_BASE_ADRR + \
+				  MLXPLAT_CPLD_LPC_I2C_CH2_OFF) | \
+				  MLXPLAT_CPLD_LPC_PIO_OFFSET)
+
+/* Start channel numbers */
+#define MLXPLAT_CPLD_CH1			2
+#define MLXPLAT_CPLD_CH2			10
+
+/* Number of LPC attached MUX platform devices */
+#define MLXPLAT_CPLD_LPC_MUX_DEVS		2
+
+/* mlxplat_priv - platform private data
+ * @pdev_i2c - i2c controller platform device
+ * @pdev_mux - array of mux platform devices
+ */
+struct mlxplat_priv {
+	struct platform_device *pdev_i2c;
+	struct platform_device *pdev_mux[MLXPLAT_CPLD_LPC_MUX_DEVS];
+};
+
+/* Regions for LPC I2C controller and LPC base register space */
+static const struct resource mlxplat_lpc_resources[] = {
+	[0] = DEFINE_RES_NAMED(MLXPLAT_CPLD_LPC_I2C_BASE_ADRR,
+			       MLXPLAT_CPLD_LPC_IO_RANGE,
+			       "mlxplat_cpld_lpc_i2c_ctrl", IORESOURCE_IO),
+	[1] = DEFINE_RES_NAMED(MLXPLAT_CPLD_LPC_REG_BASE_ADRR,
+			       MLXPLAT_CPLD_LPC_IO_RANGE,
+			       "mlxplat_cpld_lpc_regs",
+			       IORESOURCE_IO),
+};
+
+/* Platform default channels */
+static const int mlxplat_default_channels[][8] = {
+	{
+		MLXPLAT_CPLD_CH1, MLXPLAT_CPLD_CH1 + 1, MLXPLAT_CPLD_CH1 + 2,
+		MLXPLAT_CPLD_CH1 + 3, MLXPLAT_CPLD_CH1 + 4, MLXPLAT_CPLD_CH1 +
+		5, MLXPLAT_CPLD_CH1 + 6, MLXPLAT_CPLD_CH1 + 7
+	},
+	{
+		MLXPLAT_CPLD_CH2, MLXPLAT_CPLD_CH2 + 1, MLXPLAT_CPLD_CH2 + 2,
+		MLXPLAT_CPLD_CH2 + 3, MLXPLAT_CPLD_CH2 + 4, MLXPLAT_CPLD_CH2 +
+		5, MLXPLAT_CPLD_CH2 + 6, MLXPLAT_CPLD_CH2 + 7
+	},
+};
+
+/* Platform channels for MSN21xx system family */
+static const int mlxplat_msn21xx_channels[] = { 1, 2, 3, 4, 5, 6, 7, 8 };
+
+/* Platform mux data */
+static struct i2c_mux_reg_platform_data mlxplat_mux_data[] = {
+	{
+		.parent = 1,
+		.base_nr = MLXPLAT_CPLD_CH1,
+		.write_only = 1,
+		.reg = (void __iomem *)MLXPLAT_CPLD_LPC_REG1,
+		.reg_size = 1,
+		.idle_in_use = 1,
+	},
+	{
+		.parent = 1,
+		.base_nr = MLXPLAT_CPLD_CH2,
+		.write_only = 1,
+		.reg = (void __iomem *)MLXPLAT_CPLD_LPC_REG2,
+		.reg_size = 1,
+		.idle_in_use = 1,
+	},
+
+};
+
+static struct platform_device *mlxplat_dev;
+
+static int __init mlxplat_dmi_default_matched(const struct dmi_system_id *dmi)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
+		mlxplat_mux_data[i].values = mlxplat_default_channels[i];
+		mlxplat_mux_data[i].n_values =
+				ARRAY_SIZE(mlxplat_default_channels[i]);
+	}
+
+	return 1;
+};
+
+static int __init mlxplat_dmi_msn21xx_matched(const struct dmi_system_id *dmi)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
+		mlxplat_mux_data[i].values = mlxplat_msn21xx_channels;
+		mlxplat_mux_data[i].n_values =
+				ARRAY_SIZE(mlxplat_msn21xx_channels);
+	}
+
+	return 1;
+};
+
+static struct dmi_system_id mlxplat_dmi_table[] __initdata = {
+	{
+		.callback = mlxplat_dmi_default_matched,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MSN24"),
+		},
+	},
+	{
+		.callback = mlxplat_dmi_default_matched,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MSN27"),
+		},
+	},
+	{
+		.callback = mlxplat_dmi_default_matched,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MSB"),
+		},
+	},
+	{
+		.callback = mlxplat_dmi_default_matched,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MSX"),
+		},
+	},
+	{
+		.callback = mlxplat_dmi_msn21xx_matched,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Mellanox Technologies"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MSN21"),
+		},
+	},
+	{ }
+};
+
+static int __init mlxplat_init(void)
+{
+	struct mlxplat_priv *priv;
+	int i, err;
+
+	if (!dmi_check_system(mlxplat_dmi_table))
+		return -ENODEV;
+
+	mlxplat_dev = platform_device_register_simple(MLX_PLAT_DEVICE_NAME, -1,
+					mlxplat_lpc_resources,
+					ARRAY_SIZE(mlxplat_lpc_resources));
+
+	if (IS_ERR(mlxplat_dev))
+		return PTR_ERR(mlxplat_dev);
+
+	priv = devm_kzalloc(&mlxplat_dev->dev, sizeof(struct mlxplat_priv),
+			    GFP_KERNEL);
+	if (!priv) {
+		err = -ENOMEM;
+		goto fail_alloc;
+	}
+	platform_set_drvdata(mlxplat_dev, priv);
+
+	priv->pdev_i2c = platform_device_register_simple("i2c_mlxcpld", -1,
+							 NULL, 0);
+	if (IS_ERR(priv->pdev_i2c)) {
+		err = PTR_ERR(priv->pdev_i2c);
+		goto fail_alloc;
+	};
+
+	for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) {
+		priv->pdev_mux[i] = platform_device_register_resndata(
+						&mlxplat_dev->dev,
+						"i2c-mux-reg", i, NULL,
+						0, &mlxplat_mux_data[i],
+						sizeof(mlxplat_mux_data[i]));
+		if (IS_ERR(priv->pdev_mux[i])) {
+			err = PTR_ERR(priv->pdev_mux[i]);
+			goto fail_platform_mux_register;
+		}
+	}
+
+	return 0;
+
+fail_platform_mux_register:
+	for (i--; i > 0 ; i--)
+		platform_device_unregister(priv->pdev_mux[i]);
+	platform_device_unregister(priv->pdev_i2c);
+fail_alloc:
+	platform_device_unregister(mlxplat_dev);
+
+	return err;
+}
+module_init(mlxplat_init);
+
+static void __exit mlxplat_exit(void)
+{
+	struct mlxplat_priv *priv = platform_get_drvdata(mlxplat_dev);
+	int i;
+
+	for (i = ARRAY_SIZE(mlxplat_mux_data) - 1; i >= 0 ; i--)
+		platform_device_unregister(priv->pdev_mux[i]);
+
+	platform_device_unregister(priv->pdev_i2c);
+	platform_device_unregister(mlxplat_dev);
+}
+module_exit(mlxplat_exit);
+
+MODULE_AUTHOR("Vadim Pasternak (vadimp@mellanox.com)");
+MODULE_DESCRIPTION("Mellanox platform driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_ALIAS("dmi:*:*Mellanox*:MSN24*:");
+MODULE_ALIAS("dmi:*:*Mellanox*:MSN27*:");
+MODULE_ALIAS("dmi:*:*Mellanox*:MSB*:");
+MODULE_ALIAS("dmi:*:*Mellanox*:MSX*:");
+MODULE_ALIAS("dmi:*:*Mellanox*:MSN21*:");

drivers/pci/pci-mid.c

@@ -60,8 +60,13 @@ static struct pci_platform_pm_ops mid_pci_platform_pm = {
 
 #define ICPU(model)	{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, }
 
+/*
+ * This table should be in sync with the one in
+ * arch/x86/platform/intel-mid/pwr.c.
+ */
 static const struct x86_cpu_id lpss_cpu_ids[] = {
-	ICPU(INTEL_FAM6_ATOM_MERRIFIELD1),
+	ICPU(INTEL_FAM6_ATOM_PENWELL),
+	ICPU(INTEL_FAM6_ATOM_MERRIFIELD),
 	{}
 };
 

drivers/powercap/intel_rapl.c

@@ -1154,8 +1154,8 @@ static const struct x86_cpu_id rapl_ids[] __initconst = {
 
 	RAPL_CPU(INTEL_FAM6_ATOM_SILVERMONT1,	rapl_defaults_byt),
 	RAPL_CPU(INTEL_FAM6_ATOM_AIRMONT,	rapl_defaults_cht),
-	RAPL_CPU(INTEL_FAM6_ATOM_MERRIFIELD1,	rapl_defaults_tng),
-	RAPL_CPU(INTEL_FAM6_ATOM_MERRIFIELD2,	rapl_defaults_ann),
+	RAPL_CPU(INTEL_FAM6_ATOM_MERRIFIELD,	rapl_defaults_tng),
+	RAPL_CPU(INTEL_FAM6_ATOM_MOOREFIELD,	rapl_defaults_ann),
 	RAPL_CPU(INTEL_FAM6_ATOM_GOLDMONT,	rapl_defaults_core),
 	RAPL_CPU(INTEL_FAM6_ATOM_DENVERTON,	rapl_defaults_core),