dt-bindings: iio: adc: ad7606: Fix wrong maxItems value

This patch set the correct value for oversampling maxItems. In the
original example, appears 3 items for oversampling while the maxItems
is set to 1, this patch fixes those issues.

Fixes: 416f882c ("dt-bindings: iio: adc: Migrate AD7606 documentation to yaml")
Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml

@@ -82,7 +82,7 @@ properties:
       Must be the device tree identifier of the over-sampling
       mode pins. As the line is active high, it should be marked
       GPIO_ACTIVE_HIGH.
-    maxItems: 1
+    maxItems: 3
 
   adi,sw-mode:
     description:
@@ -125,9 +125,9 @@ examples:
                 adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
                 reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
                 adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
-                adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH
-                                                &gpio 23 GPIO_ACTIVE_HIGH
-                                                &gpio 26 GPIO_ACTIVE_HIGH>;
+                adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>,
+                                               <&gpio 23 GPIO_ACTIVE_HIGH>,
+                                               <&gpio 26 GPIO_ACTIVE_HIGH>;
                 standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
                 adi,sw-mode;
         };