[ARM] Remove old 26-bit ARM keyboard drivers

Also remove mouse_ps2.c which was never referenced from the Makefile.

drivers/acorn/char/Makefile

@@ -2,22 +2,6 @@
 # Makefile for the acorn character device drivers.
 #
 
-obj-arc		:= keyb_arc.o defkeymap-acorn.o
-
 obj-$(CONFIG_ARCH_ACORN)	+= i2c.o pcf8583.o
 obj-$(CONFIG_L7200_KEYB)	+= defkeymap-l7200.o keyb_l7200.o
 obj-y				+= $(obj-$(MACHINE))
-
-$(obj)/defkeymap-acorn.o: $(obj)/defkeymap-acorn.c
-
-# Uncomment if you're changing the keymap and have an appropriate
-# loadkeys version for the map. By default, we'll use the shipped
-# versions.
-# GENERATE_KEYMAP := 1
-
-ifdef GENERATE_KEYMAP
-
-$(obj)/defkeymap-acorn.c: $(obj)/%.c: $(src)/%.map
-	loadkeys --mktable $< > $@
-
-endif

drivers/acorn/char/mouse_ps2.c

-/* 
- * Driver for PS/2 mouse on IOMD interface
- */
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/ptrace.h>
-#include <linux/signal.h>
-#include <linux/timer.h>
-#include <linux/random.h>
-#include <linux/ctype.h>
-#include <linux/kbd_ll.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/miscdevice.h>
-
-#include <asm/bitops.h>
-#include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/hardware/iomd.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-
-/*
- *	PS/2 Auxiliary Device
- */
-
-static struct aux_queue *queue;	/* Mouse data buffer. */
-static int aux_count = 0;
-/* used when we send commands to the mouse that expect an ACK. */
-static unsigned char mouse_reply_expected = 0;
-
-#define MAX_RETRIES	60		/* some aux operations take long time*/
-
-/*
- *	Mouse Commands
- */
-
-#define AUX_SET_RES		0xE8	/* Set resolution */
-#define AUX_SET_SCALE11		0xE6	/* Set 1:1 scaling */
-#define AUX_SET_SCALE21		0xE7	/* Set 2:1 scaling */
-#define AUX_GET_SCALE		0xE9	/* Get scaling factor */
-#define AUX_SET_STREAM		0xEA	/* Set stream mode */
-#define AUX_SET_SAMPLE		0xF3	/* Set sample rate */
-#define AUX_ENABLE_DEV		0xF4	/* Enable aux device */
-#define AUX_DISABLE_DEV		0xF5	/* Disable aux device */
-#define AUX_RESET		0xFF	/* Reset aux device */
-#define AUX_ACK			0xFA	/* Command byte ACK. */
-
-#define AUX_BUF_SIZE		2048	/* This might be better divisible by
-					   three to make overruns stay in sync
-					   but then the read function would 
-					   need a lock etc - ick */
-
-struct aux_queue {
-	unsigned long head;
-	unsigned long tail;
-	wait_queue_head_t proc_list;
-	struct fasync_struct *fasync;
-	unsigned char buf[AUX_BUF_SIZE];
-};
-
-/*
- * Send a byte to the mouse.
- */
-static void aux_write_dev(int val)
-{
-	while (!(iomd_readb(IOMD_MSECTL) & 0x80));
-	iomd_writeb(val, IOMD_MSEDAT);
-}
-
-/*
- * Send a byte to the mouse & handle returned ack
- */
-static void aux_write_ack(int val)
-{
-	while (!(iomd_readb(IOMD_MSECTL) & 0x80));
-	iomd_writeb(val, IOMD_MSEDAT);
-
-	/* we expect an ACK in response. */
-	mouse_reply_expected++;
-}
-
-static unsigned char get_from_queue(void)
-{
-	unsigned char result;
-
-	result = queue->buf[queue->tail];
-	queue->tail = (queue->tail + 1) & (AUX_BUF_SIZE-1);
-	return result;
-}
-
-static void psaux_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-	int val = iomd_readb(IOMD_MSEDAT);
-
-	if (mouse_reply_expected) {
-		if (val == AUX_ACK) {
-			mouse_reply_expected--;
-			return;
-		}
-		mouse_reply_expected = 0;
-	}
-
-	add_mouse_randomness(val);
-	if (aux_count) {
-		int head = queue->head;
-
-		queue->buf[head] = val;
-		head = (head + 1) & (AUX_BUF_SIZE-1);
-		if (head != queue->tail) {
-			queue->head = head;
-			kill_fasync(&queue->fasync, SIGIO, POLL_IN);
-			wake_up_interruptible(&queue->proc_list);
-		}
-	}
-}
-
-static inline int queue_empty(void)
-{
-	return queue->head == queue->tail;
-}
-
-static int fasync_aux(int fd, struct file *filp, int on)
-{
-	int retval;
-
-	retval = fasync_helper(fd, filp, on, &queue->fasync);
-	if (retval < 0)
-		return retval;
-	return 0;
-}
-
-
-/*
- * Random magic cookie for the aux device
- */
-#define AUX_DEV ((void *)queue)
-
-static int release_aux(struct inode * inode, struct file * file)
-{
-	fasync_aux(-1, file, 0);
-	if (--aux_count)
-		return 0;
-	free_irq(IRQ_MOUSERX, AUX_DEV);
-	return 0;
-}
-
-/*
- * Install interrupt handler.
- * Enable auxiliary device.
- */
-
-static int open_aux(struct inode * inode, struct file * file)
-{
-	if (aux_count++)
-		return 0;
-
-	queue->head = queue->tail = 0;		/* Flush input queue */
-	if (request_irq(IRQ_MOUSERX, psaux_interrupt, SA_SHIRQ, "ps/2 mouse", 
-			AUX_DEV)) {
-		aux_count--;
-		return -EBUSY;
-	}
-
-	aux_write_ack(AUX_ENABLE_DEV); /* Enable aux device */
-
-	return 0;
-}
-
-/*
- * Put bytes from input queue to buffer.
- */
-
-static ssize_t read_aux(struct file * file, char * buffer,
-			size_t count, loff_t *ppos)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	ssize_t i = count;
-	unsigned char c;
-
-	if (queue_empty()) {
-		if (file->f_flags & O_NONBLOCK)
-			return -EAGAIN;
-		add_wait_queue(&queue->proc_list, &wait);
-repeat:
-		current->state = TASK_INTERRUPTIBLE;
-		if (queue_empty() && !signal_pending(current)) {
-			schedule();
-			goto repeat;
-		}
-		current->state = TASK_RUNNING;
-		remove_wait_queue(&queue->proc_list, &wait);
-	}
-	while (i > 0 && !queue_empty()) {
-		c = get_from_queue();
-		put_user(c, buffer++);
-		i--;
-	}
-	if (count-i) {
-		file->f_dentry->d_inode->i_atime = CURRENT_TIME;
-		return count-i;
-	}
-	if (signal_pending(current))
-		return -ERESTARTSYS;
-	return 0;
-}
-
-/*
- * Write to the aux device.
- */
-
-static ssize_t write_aux(struct file * file, const char * buffer,
-			 size_t count, loff_t *ppos)
-{
-	ssize_t retval = 0;
-
-	if (count) {
-		ssize_t written = 0;
-
-		if (count > 32)
-			count = 32; /* Limit to 32 bytes. */
-		do {
-			char c;
-			get_user(c, buffer++);
-			aux_write_dev(c);
-			written++;
-		} while (--count);
-		retval = -EIO;
-		if (written) {
-			retval = written;
-			file->f_dentry->d_inode->i_mtime = CURRENT_TIME;
-		}
-	}
-
-	return retval;
-}
-
-static unsigned int aux_poll(struct file *file, poll_table * wait)
-{
-	poll_wait(file, &queue->proc_list, wait);
-	if (!queue_empty())
-		return POLLIN | POLLRDNORM;
-	return 0;
-}
-
-struct file_operations psaux_fops = {
-	.read		= read_aux,
-	.write		= write_aux,
-	.poll		= aux_poll,
-	.open		= open_aux,
-	.release	= release_aux,
-	.fasync		= fasync_aux,
-};
-
-/*
- * Initialize driver.
- */
-static struct miscdevice psaux_mouse = {
-	PSMOUSE_MINOR, "psaux", &psaux_fops
-};
-
-int __init psaux_init(void)
-{
-	/* Reset the mouse state machine. */
-	iomd_writeb(0, IOMD_MSECTL);
-	iomd_writeb(8, IOMD_MSECTL);
-  
-	queue = (struct aux_queue *) kmalloc(sizeof(*queue), GFP_KERNEL);
-	if (queue == NULL)
-		return -ENOMEM;
-
-	if (misc_register(&psaux_mouse)) {
-		kfree(queue);
-		return -ENODEV;
-	}
-
-	memset(queue, 0, sizeof(*queue));
-	queue->head = queue->tail = 0;
-	init_waitqueue_head(&queue->proc_list);
-
-	aux_write_ack(AUX_SET_SAMPLE);
-	aux_write_ack(100);			/* 100 samples/sec */
-	aux_write_ack(AUX_SET_RES);
-	aux_write_ack(3);			/* 8 counts per mm */
-	aux_write_ack(AUX_SET_SCALE21);		/* 2:1 scaling */
-
-	return 0;
-}