Commit a704bb5c authored by Thomas Petazzoni's avatar Thomas Petazzoni Committed by David S. Miller

net: mvpp2: use {get, put}_cpu() instead of smp_processor_id()

smp_processor_id() should not be used in migration-enabled contexts. We
originally thought it was OK in the specific situation of this driver,
but it was wrong, and calling smp_processor_id() in a migration-enabled
context prints a big fat warning when CONFIG_DEBUG_PREEMPT=y.

Therefore, this commit replaces the smp_processor_id() in
migration-enabled contexts by the appropriate get_cpu/put_cpu sections.
Reported-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
Fixes: a786841d ("net: mvpp2: handle register mapping and access for PPv2.2")
Signed-off-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 56b8aae9
......@@ -3719,7 +3719,7 @@ static void mvpp2_bm_bufs_get_addrs(struct device *dev, struct mvpp2 *priv,
dma_addr_t *dma_addr,
phys_addr_t *phys_addr)
{
int cpu = smp_processor_id();
int cpu = get_cpu();
*dma_addr = mvpp2_percpu_read(priv, cpu,
MVPP2_BM_PHY_ALLOC_REG(bm_pool->id));
......@@ -3740,6 +3740,8 @@ static void mvpp2_bm_bufs_get_addrs(struct device *dev, struct mvpp2 *priv,
if (sizeof(phys_addr_t) == 8)
*phys_addr |= (u64)phys_addr_highbits << 32;
}
put_cpu();
}
/* Free all buffers from the pool */
......@@ -3925,7 +3927,7 @@ static inline void mvpp2_bm_pool_put(struct mvpp2_port *port, int pool,
dma_addr_t buf_dma_addr,
phys_addr_t buf_phys_addr)
{
int cpu = smp_processor_id();
int cpu = get_cpu();
if (port->priv->hw_version == MVPP22) {
u32 val = 0;
......@@ -3952,6 +3954,8 @@ static inline void mvpp2_bm_pool_put(struct mvpp2_port *port, int pool,
MVPP2_BM_VIRT_RLS_REG, buf_phys_addr);
mvpp2_percpu_write(port->priv, cpu,
MVPP2_BM_PHY_RLS_REG(pool), buf_dma_addr);
put_cpu();
}
/* Refill BM pool */
......@@ -4732,7 +4736,7 @@ static void mvpp2_txp_max_tx_size_set(struct mvpp2_port *port)
static void mvpp2_rx_pkts_coal_set(struct mvpp2_port *port,
struct mvpp2_rx_queue *rxq)
{
int cpu = smp_processor_id();
int cpu = get_cpu();
if (rxq->pkts_coal > MVPP2_OCCUPIED_THRESH_MASK)
rxq->pkts_coal = MVPP2_OCCUPIED_THRESH_MASK;
......@@ -4740,6 +4744,8 @@ static void mvpp2_rx_pkts_coal_set(struct mvpp2_port *port,
mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_NUM_REG, rxq->id);
mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_THRESH_REG,
rxq->pkts_coal);
put_cpu();
}
static u32 mvpp2_usec_to_cycles(u32 usec, unsigned long clk_hz)
......@@ -4920,7 +4926,7 @@ static int mvpp2_rxq_init(struct mvpp2_port *port,
mvpp2_write(port->priv, MVPP2_RXQ_STATUS_REG(rxq->id), 0);
/* Set Rx descriptors queue starting address - indirect access */
cpu = smp_processor_id();
cpu = get_cpu();
mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_NUM_REG, rxq->id);
if (port->priv->hw_version == MVPP21)
rxq_dma = rxq->descs_dma;
......@@ -4929,6 +4935,7 @@ static int mvpp2_rxq_init(struct mvpp2_port *port,
mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_DESC_ADDR_REG, rxq_dma);
mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_DESC_SIZE_REG, rxq->size);
mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_INDEX_REG, 0);
put_cpu();
/* Set Offset */
mvpp2_rxq_offset_set(port, rxq->id, NET_SKB_PAD);
......@@ -4991,10 +4998,11 @@ static void mvpp2_rxq_deinit(struct mvpp2_port *port,
* free descriptor number
*/
mvpp2_write(port->priv, MVPP2_RXQ_STATUS_REG(rxq->id), 0);
cpu = smp_processor_id();
cpu = get_cpu();
mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_NUM_REG, rxq->id);
mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_DESC_ADDR_REG, 0);
mvpp2_percpu_write(port->priv, cpu, MVPP2_RXQ_DESC_SIZE_REG, 0);
put_cpu();
}
/* Create and initialize a Tx queue */
......@@ -5017,7 +5025,7 @@ static int mvpp2_txq_init(struct mvpp2_port *port,
txq->last_desc = txq->size - 1;
/* Set Tx descriptors queue starting address - indirect access */
cpu = smp_processor_id();
cpu = get_cpu();
mvpp2_percpu_write(port->priv, cpu, MVPP2_TXQ_NUM_REG, txq->id);
mvpp2_percpu_write(port->priv, cpu, MVPP2_TXQ_DESC_ADDR_REG,
txq->descs_dma);
......@@ -5042,6 +5050,7 @@ static int mvpp2_txq_init(struct mvpp2_port *port,
mvpp2_percpu_write(port->priv, cpu, MVPP2_TXQ_PREF_BUF_REG,
MVPP2_PREF_BUF_PTR(desc) | MVPP2_PREF_BUF_SIZE_16 |
MVPP2_PREF_BUF_THRESH(desc_per_txq / 2));
put_cpu();
/* WRR / EJP configuration - indirect access */
tx_port_num = mvpp2_egress_port(port);
......@@ -5112,10 +5121,11 @@ static void mvpp2_txq_deinit(struct mvpp2_port *port,
mvpp2_write(port->priv, MVPP2_TXQ_SCHED_TOKEN_CNTR_REG(txq->id), 0);
/* Set Tx descriptors queue starting address and size */
cpu = smp_processor_id();
cpu = get_cpu();
mvpp2_percpu_write(port->priv, cpu, MVPP2_TXQ_NUM_REG, txq->id);
mvpp2_percpu_write(port->priv, cpu, MVPP2_TXQ_DESC_ADDR_REG, 0);
mvpp2_percpu_write(port->priv, cpu, MVPP2_TXQ_DESC_SIZE_REG, 0);
put_cpu();
}
/* Cleanup Tx ports */
......@@ -5125,7 +5135,7 @@ static void mvpp2_txq_clean(struct mvpp2_port *port, struct mvpp2_tx_queue *txq)
int delay, pending, cpu;
u32 val;
cpu = smp_processor_id();
cpu = get_cpu();
mvpp2_percpu_write(port->priv, cpu, MVPP2_TXQ_NUM_REG, txq->id);
val = mvpp2_percpu_read(port->priv, cpu, MVPP2_TXQ_PREF_BUF_REG);
val |= MVPP2_TXQ_DRAIN_EN_MASK;
......@@ -5152,6 +5162,7 @@ static void mvpp2_txq_clean(struct mvpp2_port *port, struct mvpp2_tx_queue *txq)
val &= ~MVPP2_TXQ_DRAIN_EN_MASK;
mvpp2_percpu_write(port->priv, cpu, MVPP2_TXQ_PREF_BUF_REG, val);
put_cpu();
for_each_present_cpu(cpu) {
txq_pcpu = per_cpu_ptr(txq->pcpu, cpu);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment