Commit a7260c8c authored by Heikki Krogerus's avatar Heikki Krogerus Committed by Greg Kroah-Hartman

serial: 8250_dw: Move device tree code to separate function

Trivial cleanup. This makes it easier to add different
methods to enumerate the device, for example ACPI 5.0
enumeration.
Signed-off-by: default avatarHeikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: default avatarJamie Iles <jamie@jamieiles.com>
Acked-by: default avatarAlan Cox <alan@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent f93366ff
......@@ -87,25 +87,51 @@ static int dw8250_handle_irq(struct uart_port *p)
return 0;
}
static int dw8250_probe_of(struct uart_port *p)
{
struct device_node *np = p->dev->of_node;
u32 val;
if (!of_property_read_u32(np, "reg-io-width", &val)) {
switch (val) {
case 1:
break;
case 4:
p->iotype = UPIO_MEM32;
p->serial_in = dw8250_serial_in32;
p->serial_out = dw8250_serial_out32;
break;
default:
dev_err(p->dev, "unsupported reg-io-width (%u)\n", val);
return -EINVAL;
}
}
if (!of_property_read_u32(np, "reg-shift", &val))
p->regshift = val;
if (of_property_read_u32(np, "clock-frequency", &val)) {
dev_err(p->dev, "no clock-frequency property set\n");
return -EINVAL;
}
p->uartclk = val;
return 0;
}
static int dw8250_probe(struct platform_device *pdev)
{
struct uart_8250_port uart = {};
struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
struct device_node *np = pdev->dev.of_node;
u32 val;
struct dw8250_data *data;
int err;
if (!regs || !irq) {
dev_err(&pdev->dev, "no registers/irq defined\n");
return -EINVAL;
}
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
uart.port.private_data = data;
spin_lock_init(&uart.port.lock);
uart.port.mapbase = regs->start;
uart.port.irq = irq->start;
......@@ -121,30 +147,20 @@ static int dw8250_probe(struct platform_device *pdev)
uart.port.iotype = UPIO_MEM;
uart.port.serial_in = dw8250_serial_in;
uart.port.serial_out = dw8250_serial_out;
if (!of_property_read_u32(np, "reg-io-width", &val)) {
switch (val) {
case 1:
break;
case 4:
uart.port.iotype = UPIO_MEM32;
uart.port.serial_in = dw8250_serial_in32;
uart.port.serial_out = dw8250_serial_out32;
break;
default:
dev_err(&pdev->dev, "unsupported reg-io-width (%u)\n",
val);
return -EINVAL;
}
if (pdev->dev.of_node) {
err = dw8250_probe_of(&uart.port);
if (err)
return err;
} else {
return -ENODEV;
}
if (!of_property_read_u32(np, "reg-shift", &val))
uart.port.regshift = val;
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
if (of_property_read_u32(np, "clock-frequency", &val)) {
dev_err(&pdev->dev, "no clock-frequency property set\n");
return -EINVAL;
}
uart.port.uartclk = val;
uart.port.private_data = data;
data->line = serial8250_register_8250_port(&uart);
if (data->line < 0)
......@@ -187,17 +203,17 @@ static int dw8250_resume(struct platform_device *pdev)
#define dw8250_resume NULL
#endif /* CONFIG_PM */
static const struct of_device_id dw8250_match[] = {
static const struct of_device_id dw8250_of_match[] = {
{ .compatible = "snps,dw-apb-uart" },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, dw8250_match);
MODULE_DEVICE_TABLE(of, dw8250_of_match);
static struct platform_driver dw8250_platform_driver = {
.driver = {
.name = "dw-apb-uart",
.owner = THIS_MODULE,
.of_match_table = dw8250_match,
.of_match_table = dw8250_of_match,
},
.probe = dw8250_probe,
.remove = dw8250_remove,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment