net: mvpp2: enable ACPI support in the driver
This patch introduces an alternative way of obtaining resources - via ACPI tables provided by firmware. Enabling coexistence with the DT support, in addition to the OF_*->device_*/fwnode_* API replacement, required following steps to be taken: * Add mvpp2_acpi_match table * Omit clock configuration and obtain tclk from the property - in ACPI world, the firmware is responsible for clock maintenance. * Disable comphy and syscon handling as they are not available for ACPI. * Modify way of obtaining interrupts - use newly introduced fwnode_irq_get() routine * Until proper MDIO bus and PHY handling with ACPI is established in the kernel, use only link interrupts feature in the driver. For the RGMII port it results in depending on GMAC settings done during firmware stage. * When booting with ACPI MVPP2_QDIST_MULTI_MODE is picked by default, as there is no need to keep any kind of the backward compatibility. Moreover, a memory region used by mvmdio driver is usually placed in the middle of the address space of the PP2 network controller. The MDIO base address is obtained without requesting memory region (by devm_ioremap() call) in mvmdio.c, later overlapping resources are requested by the network driver, which is responsible for avoiding a concurrent access. In case the MDIO memory region is declared in the ACPI, it can already appear as 'in-use' in the OS. Because it is overlapped by second region of the network controller, make sure it is released, before requesting it again. The care is taken by mvpp2 driver to avoid concurrent access to this memory region. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Showing
Please register or sign in to comment