Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "This contains three commits to fix memory corruption bugs with certain
  Apple AirPort cards, plus a fix for a X86_BUG() ID definitions collision
  bug in asm/cpufeatures.h"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/quirks: Add early quirk to reset Apple AirPort card
  x86/quirks: Reintroduce scanning of secondary buses
  x86/quirks: Apply nvidia_bugs quirk only on root bus
  x86/cpu: Fix duplicated X86_BUG(9) macro

arch/x86/include/asm/cpufeatures.h

@@ -301,10 +301,6 @@
 #define X86_BUG_FXSAVE_LEAK	X86_BUG(6) /* FXSAVE leaks FOP/FIP/FOP */
 #define X86_BUG_CLFLUSH_MONITOR	X86_BUG(7) /* AAI65, CLFLUSH required before MONITOR */
 #define X86_BUG_SYSRET_SS_ATTRS	X86_BUG(8) /* SYSRET doesn't fix up SS attrs */
-#define X86_BUG_NULL_SEG	X86_BUG(9) /* Nulling a selector preserves the base */
-#define X86_BUG_SWAPGS_FENCE	X86_BUG(10) /* SWAPGS without input dep on GS */
-
-
 #ifdef CONFIG_X86_32
 /*
  * 64-bit kernels don't use X86_BUG_ESPFIX.  Make the define conditional
@@ -312,5 +308,7 @@
  */
 #define X86_BUG_ESPFIX		X86_BUG(9) /* "" IRET to 16-bit SS corrupts ESP/RSP high bits */
 #endif
+#define X86_BUG_NULL_SEG	X86_BUG(10) /* Nulling a selector preserves the base */
+#define X86_BUG_SWAPGS_FENCE	X86_BUG(11) /* SWAPGS without input dep on GS */
 
 #endif /* _ASM_X86_CPUFEATURES_H */

arch/x86/kernel/early-quirks.c

@@ -11,7 +11,11 @@
 
 #include <linux/pci.h>
 #include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
 #include <linux/pci_ids.h>
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_regs.h>
 #include <drm/i915_drm.h>
 #include <asm/pci-direct.h>
 #include <asm/dma.h>
@@ -21,6 +25,9 @@
 #include <asm/iommu.h>
 #include <asm/gart.h>
 #include <asm/irq_remapping.h>
+#include <asm/early_ioremap.h>
+
+#define dev_err(msg)  pr_err("pci 0000:%02x:%02x.%d: %s", bus, slot, func, msg)
 
 static void __init fix_hypertransport_config(int num, int slot, int func)
 {
@@ -75,6 +82,13 @@ static void __init nvidia_bugs(int num, int slot, int func)
 {
 #ifdef CONFIG_ACPI
 #ifdef CONFIG_X86_IO_APIC
+	/*
+	 * Only applies to Nvidia root ports (bus 0) and not to
+	 * Nvidia graphics cards with PCI ports on secondary buses.
+	 */
+	if (num)
+		return;
+
 	/*
 	 * All timer overrides on Nvidia are
 	 * wrong unless HPET is enabled.
@@ -590,6 +604,61 @@ static void __init force_disable_hpet(int num, int slot, int func)
 #endif
 }
 
+#define BCM4331_MMIO_SIZE	16384
+#define BCM4331_PM_CAP		0x40
+#define bcma_aread32(reg)	ioread32(mmio + 1 * BCMA_CORE_SIZE + reg)
+#define bcma_awrite32(reg, val)	iowrite32(val, mmio + 1 * BCMA_CORE_SIZE + reg)
+
+static void __init apple_airport_reset(int bus, int slot, int func)
+{
+	void __iomem *mmio;
+	u16 pmcsr;
+	u64 addr;
+	int i;
+
+	if (!dmi_match(DMI_SYS_VENDOR, "Apple Inc."))
+		return;
+
+	/* Card may have been put into PCI_D3hot by grub quirk */
+	pmcsr = read_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL);
+
+	if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) {
+		pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+		write_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL, pmcsr);
+		mdelay(10);
+
+		pmcsr = read_pci_config_16(bus, slot, func, BCM4331_PM_CAP + PCI_PM_CTRL);
+		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) {
+			dev_err("Cannot power up Apple AirPort card\n");
+			return;
+		}
+	}
+
+	addr  =      read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_0);
+	addr |= (u64)read_pci_config(bus, slot, func, PCI_BASE_ADDRESS_1) << 32;
+	addr &= PCI_BASE_ADDRESS_MEM_MASK;
+
+	mmio = early_ioremap(addr, BCM4331_MMIO_SIZE);
+	if (!mmio) {
+		dev_err("Cannot iomap Apple AirPort card\n");
+		return;
+	}
+
+	pr_info("Resetting Apple AirPort card (left enabled by EFI)\n");
+
+	for (i = 0; bcma_aread32(BCMA_RESET_ST) && i < 30; i++)
+		udelay(10);
+
+	bcma_awrite32(BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+	bcma_aread32(BCMA_RESET_CTL);
+	udelay(1);
+
+	bcma_awrite32(BCMA_RESET_CTL, 0);
+	bcma_aread32(BCMA_RESET_CTL);
+	udelay(10);
+
+	early_iounmap(mmio, BCM4331_MMIO_SIZE);
+}
 
 #define QFLAG_APPLY_ONCE 	0x1
 #define QFLAG_APPLIED		0x2
@@ -603,12 +672,6 @@ struct chipset {
 	void (*f)(int num, int slot, int func);
 };
 
-/*
- * Only works for devices on the root bus. If you add any devices
- * not on bus 0 readd another loop level in early_quirks(). But
- * be careful because at least the Nvidia quirk here relies on
- * only matching on bus 0.
- */
 static struct chipset early_qrk[] __initdata = {
 	{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
 	  PCI_CLASS_BRIDGE_PCI, PCI_ANY_ID, QFLAG_APPLY_ONCE, nvidia_bugs },
@@ -638,9 +701,13 @@ static struct chipset early_qrk[] __initdata = {
 	 */
 	{ PCI_VENDOR_ID_INTEL, 0x0f00,
 		PCI_CLASS_BRIDGE_HOST, PCI_ANY_ID, 0, force_disable_hpet},
+	{ PCI_VENDOR_ID_BROADCOM, 0x4331,
+	  PCI_CLASS_NETWORK_OTHER, PCI_ANY_ID, 0, apple_airport_reset},
 	{}
 };
 
+static void __init early_pci_scan_bus(int bus);
+
 /**
  * check_dev_quirk - apply early quirks to a given PCI device
  * @num: bus number
@@ -649,7 +716,7 @@ static struct chipset early_qrk[] __initdata = {
  *
  * Check the vendor & device ID against the early quirks table.
  *
- * If the device is single function, let early_quirks() know so we don't
+ * If the device is single function, let early_pci_scan_bus() know so we don't
  * poke at this device again.
  */
 static int __init check_dev_quirk(int num, int slot, int func)
@@ -658,6 +725,7 @@ static int __init check_dev_quirk(int num, int slot, int func)
 	u16 vendor;
 	u16 device;
 	u8 type;
+	u8 sec;
 	int i;
 
 	class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE);
@@ -685,25 +753,36 @@ static int __init check_dev_quirk(int num, int slot, int func)
 
 	type = read_pci_config_byte(num, slot, func,
 				    PCI_HEADER_TYPE);
+
+	if ((type & 0x7f) == PCI_HEADER_TYPE_BRIDGE) {
+		sec = read_pci_config_byte(num, slot, func, PCI_SECONDARY_BUS);
+		if (sec > num)
+			early_pci_scan_bus(sec);
+	}
+
 	if (!(type & 0x80))
 		return -1;
 
 	return 0;
 }
 
-void __init early_quirks(void)
+static void __init early_pci_scan_bus(int bus)
 {
 	int slot, func;
 
-	if (!early_pci_allowed())
-		return;
-
 	/* Poor man's PCI discovery */
-	/* Only scan the root bus */
 	for (slot = 0; slot < 32; slot++)
 		for (func = 0; func < 8; func++) {
 			/* Only probe function 0 on single fn devices */
-			if (check_dev_quirk(0, slot, func))
+			if (check_dev_quirk(bus, slot, func))
 				break;
 		}
 }
+
+void __init early_quirks(void)
+{
+	if (!early_pci_allowed())
+		return;
+
+	early_pci_scan_bus(0);
+}

drivers/bcma/bcma_private.h

@@ -8,8 +8,6 @@
 #include <linux/bcma/bcma.h>
 #include <linux/delay.h>
 
-#define BCMA_CORE_SIZE		0x1000
-
 #define bcma_err(bus, fmt, ...) \
 	pr_err("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
 #define bcma_warn(bus, fmt, ...) \

include/linux/bcma/bcma.h

@@ -159,6 +159,7 @@ struct bcma_host_ops {
 #define BCMA_CORE_DEFAULT		0xFFF
 
 #define BCMA_MAX_NR_CORES		16
+#define BCMA_CORE_SIZE			0x1000
 
 /* Chip IDs of PCIe devices */
 #define BCMA_CHIP_ID_BCM4313	0x4313