treewide: replace '---help---' in Kconfig files with 'help'

Since commit 84af7a61 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a61 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
a7f7f624 · Masahiro Yamada · e4a42c82 · a7f7f624 · a7f7f624 · a7f7f624
Commit a7f7f624 authored Jun 14, 2020 by Masahiro Yamada
427 changed files
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -876,7 +876,7 @@ config VMAP_STACK
 	bool "Use a virtually-mapped stack"
 	depends on HAVE_ARCH_VMAP_STACK
 	depends on !KASAN || KASAN_VMALLOC
-	---help---
+	help
 	  Enable this if you want the use virtually-mapped kernel stacks
 	  with guard pages.  This causes kernel stack overflows to be
 	  caught immediately rather than causing difficult-to-diagnose
@@ -948,7 +948,7 @@ config ARCH_USE_MEMREMAP_PROT
 config LOCK_EVENT_COUNTS
 	bool "Locking event counts collection"
 	depends on DEBUG_FS
-	---help---
+	help
 	  Enable light-weight counting of various locking related events
 	  in the system with minimal performance impact. This reduces
 	  the chance of application behavior change because of timing

--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -83,7 +83,7 @@ menu "System setup"
 choice
 	prompt "Alpha system type"
 	default ALPHA_GENERIC
-	---help---
+	help
 	  This is the system type of your hardware.  A "generic" kernel will
 	  run on any supported Alpha system. However, if you configure a
 	  kernel for your specific system, it will be faster and smaller.
@@ -480,7 +480,7 @@ config VGA_HOSE
 config ALPHA_QEMU
 	bool "Run under QEMU emulation"
 	depends on !ALPHA_GENERIC
-	---help---
+	help
 	  Assume the presence of special features supported by QEMU PALcode
 	  that reduce the overhead of system emulation.

@@ -495,7 +495,7 @@ config ALPHA_SRM
 	bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
 	depends on TTY
 	default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
-	---help---
+	help
 	  There are two different types of booting firmware on Alphas: SRM,
 	  which is command line driven, and ARC, which uses menus and arrow
 	  keys. Details about the Linux/Alpha booting process are contained in
@@ -521,7 +521,7 @@ config ARCH_MAY_HAVE_PC_FDC
 config SMP
 	bool "Symmetric multi-processing support"
 	depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
-	---help---
+	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
 	  than one CPU, say Y.
@@ -569,7 +569,7 @@ config ALPHA_WTINT
 	default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
 	default n if !ALPHA_SRM && !ALPHA_GENERIC
 	default y if SMP
-	---help---
+	help
 	  The Wait for Interrupt (WTINT) PALcall attempts to place the CPU
 	  to sleep until the next interrupt.  This may reduce the power
 	  consumed, and the heat produced by the computer.  However, it has
@@ -595,7 +595,7 @@ config NODES_SHIFT
 # LARGE_VMALLOC is racy, if you *really* need it then fix it first
 config ALPHA_LARGE_VMALLOC
 	bool
-	---help---
+	help
 	  Process creation and other aspects of virtual memory management can
 	  be streamlined if we restrict the kernel to one PGD for all vmalloc
 	  allocations.  This equates to about 8GB.
@@ -614,7 +614,7 @@ config VERBOSE_MCHECK_ON
 	int "Verbose Printing Mode (0=off, 1=on, 2=all)"
 	depends on VERBOSE_MCHECK
 	default 1
-	---help---
+	help
 	  This option allows the default printing mode to be set, and then
 	  possibly overridden by a boot command argument.

@@ -633,7 +633,7 @@ choice
 	default HZ_128 if ALPHA_QEMU
 	default HZ_1200 if ALPHA_RAWHIDE
 	default HZ_1024
-	---help---
+	help
 	  The frequency at which timer interrupts occur.  A high frequency
 	  minimizes latency, whereas a low frequency minimizes overhead of
 	  process accounting.  The later effect is especially significant
@@ -668,7 +668,7 @@ config HZ
 config SRM_ENV
 	tristate "SRM environment through procfs"
 	depends on PROC_FS
-	---help---
+	help
 	  If you enable this option, a subdirectory inside /proc called
 	  /proc/srm_environment will give you access to the all important
 	  SRM environment variables (those which have a name) and also

--- a/arch/alpha/Kconfig.debug
+++ b/arch/alpha/Kconfig.debug
@@ -9,7 +9,7 @@ config ALPHA_LEGACY_START_ADDRESS
 	bool "Legacy kernel start address"
 	depends on ALPHA_GENERIC
 	default n
-	---help---
+	help
 	  The 2.4 kernel changed the kernel start address from 0x310000
 	  to 0x810000 to make room for the Wildfire's larger SRM console.
 	  Recent consoles on Titan and Marvel machines also require the

--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -348,7 +348,7 @@ config NODES_SHIFT
 	default "0" if !DISCONTIGMEM
 	default "1" if DISCONTIGMEM
 	depends on NEED_MULTIPLE_NODES
-	---help---
+	help
 	  Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory
 	  zones.


--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1655,7 +1655,7 @@ config UACCESS_WITH_MEMCPY
 config SECCOMP
 	bool
 	prompt "Enable seccomp to safely compute untrusted bytecode"
-	---help---
+	help
 	  This kernel feature is useful for number crunching applications
 	  that may need to compute untrusted bytecode during their
 	  execution. By using pipes or other transports made available to
@@ -1963,7 +1963,7 @@ config EFI
 	select EFI_STUB
 	select EFI_GENERIC_STUB
 	select EFI_RUNTIME_WRAPPERS
-	---help---
+	help
 	  This option provides support for runtime services provided
 	  by UEFI firmware (such as non-volatile variables, realtime
 	  clock, and platform reset). A UEFI stub is also provided to
@@ -2005,7 +2005,7 @@ comment "At least one emulation must be selected"
 config FPE_NWFPE
 	bool "NWFPE math emulation"
 	depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
-	---help---
+	help
 	  Say Y to include the NWFPE floating point emulator in the kernel.
 	  This is necessary to run most binaries. Linux does not currently
 	  support floating point hardware so you need to say Y here even if
@@ -2029,7 +2029,7 @@ config FPE_NWFPE_XP
 config FPE_FASTFPE
 	bool "FastFPE math emulation (EXPERIMENTAL)"
 	depends on (!AEABI || OABI_COMPAT) && !CPU_32v3
-	---help---
+	help
 	  Say Y here to include the FAST floating point emulator in the kernel.
 	  This is an experimental much faster emulator which now also has full
 	  precision for the mantissa.  It does not support any exceptions.

--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -9,7 +9,7 @@ config ARM_PTDUMP_DEBUGFS
 	depends on MMU
 	select ARM_PTDUMP_CORE
 	select DEBUG_FS
-	---help---
+	help
 	  Say Y here if you want to show the kernel pagetable layout in a
 	  debugfs file. This information is only useful for kernel developers
 	  who are working in architecture specific areas of the kernel.
@@ -21,7 +21,7 @@ config DEBUG_WX
 	bool "Warn on W+X mappings at boot"
 	depends on MMU
 	select ARM_PTDUMP_CORE
-	---help---
+	help
 		Generate a warning if any W+X mappings are found at boot.

 		This is useful for discovering cases where the kernel is leaving

--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -22,7 +22,7 @@ config ARCH_PERSONAL_SERVER
 	select ISA
 	select ISA_DMA
 	select FORCE_PCI
-	---help---
+	help
 	  Say Y here if you intend to run this kernel on the Compaq
 	  Personal Server.


--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -1035,7 +1035,7 @@ config CC_HAVE_SHADOW_CALL_STACK

 config SECCOMP
 	bool "Enable seccomp to safely compute untrusted bytecode"
-	---help---
+	help
 	  This kernel feature is useful for number crunching applications
 	  that may need to compute untrusted bytecode during their
 	  execution. By using pipes or other transports made available to
@@ -1068,7 +1068,7 @@ config KEXEC
 	depends on PM_SLEEP_SMP
 	select KEXEC_CORE
 	bool "kexec system call"
-	---help---
+	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
 	  but it is independent of the system firmware.   And like a reboot

--- a/arch/arm64/kvm/Kconfig
+++ b/arch/arm64/kvm/Kconfig
@@ -7,7 +7,7 @@ source "virt/lib/Kconfig"

 menuconfig VIRTUALIZATION
 	bool "Virtualization"
-	---help---
+	help
 	  Say Y here to get to see options for using your Linux host to run
 	  other operating systems inside virtual machines (guests).
 	  This option alone does not add any kernel code.
@@ -40,7 +40,7 @@ menuconfig KVM
 	select HAVE_KVM_VCPU_RUN_PID_CHANGE
 	select TASKSTATS
 	select TASK_DELAY_ACCT
-	---help---
+	help
 	  Support hosting virtualized guest machines.

 	  If unsure, say N.
@@ -53,7 +53,7 @@ config KVM_ARM_PMU
 	bool "Virtual Performance Monitoring Unit (PMU) support"
 	depends on HW_PERF_EVENTS
 	default y
-	---help---
+	help
 	  Adds support for a virtual Performance Monitoring Unit (PMU) in
 	  virtual machines.


--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -31,13 +31,13 @@ config HEXAGON
 	select GENERIC_CLOCKEVENTS_BROADCAST
 	select MODULES_USE_ELF_RELA
 	select GENERIC_CPU_DEVICES
-	---help---
+	help
 	  Qualcomm Hexagon is a processor architecture designed for high
 	  performance and low power across a wide variety of applications.

 config HEXAGON_PHYS_OFFSET
 	def_bool y
-	---help---
+	help
 	  Platforms that don't load the kernel at zero set this.

 config FRAME_POINTER
@@ -83,7 +83,7 @@ choice

 config HEXAGON_COMET
 	bool "Comet Board"
-	---help---
+	help
 	  Support for the Comet platform.

 endchoice
@@ -104,7 +104,7 @@ config CMDLINE

 config SMP
 	bool "Multi-Processing support"
-	---help---
+	help
 	  Enables SMP support in the kernel.  If unsure, say "Y"

 config NR_CPUS
@@ -112,7 +112,7 @@ config NR_CPUS
 	range 2 6 if SMP
 	default "1" if !SMP
 	default "6" if SMP
-	---help---
+	help
 	  This allows you to specify the maximum number of CPUs which this
 	  kernel will support.  The maximum supported value is 6 and the
 	  minimum value which makes sense is 2.
@@ -123,7 +123,7 @@ config NR_CPUS
 choice
 	prompt "Kernel page size"
 	default PAGE_SIZE_4KB
-	---help---
+	help
 	  Changes the default page size; use with caution.

 config PAGE_SIZE_4KB

--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -243,7 +243,7 @@ config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SMP
 	default n
-	---help---
+	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu/cpu#.
 	  Say N if you want to disable CPU hotplug.
@@ -266,7 +266,7 @@ config PERMIT_BSP_REMOVE
 	bool "Support removal of Bootstrap Processor"
 	depends on HOTPLUG_CPU
 	default n
-	---help---
+	help
 	Say Y here if your platform SAL will support removal of BSP with HOTPLUG_CPU
 	support. 

@@ -274,7 +274,7 @@ config FORCE_CPEI_RETARGET
 	bool "Force assumption that CPEI can be re-targeted"
 	depends on PERMIT_BSP_REMOVE
 	default n
-	---help---
+	help
 	Say Y if you need to force the assumption that CPEI can be re-targeted to
 	any cpu in the system. This hint is available via ACPI 3.0 specifications.
 	Tiger4 systems are capable of re-directing CPEI to any CPU other than BSP.

--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -343,7 +343,7 @@ config M68KFPU_EMU_ONLY
 config ADVANCED
 	bool "Advanced configuration options"
 	depends on MMU
-	---help---
+	help
 	  This gives you access to some advanced options for the CPU. The
 	  defaults should be fine for most users, but these options may make
 	  it possible for you to improve performance somewhat if you know what
@@ -358,7 +358,7 @@ config ADVANCED
 config RMW_INSNS
 	bool "Use read-modify-write instructions"
 	depends on ADVANCED
-	---help---
+	help
 	  This allows to use certain instructions that work with indivisible
 	  read-modify-write bus cycles. While this is faster than the
 	  workaround of disabling interrupts, it can conflict with DMA
@@ -386,7 +386,7 @@ config ARCH_DISCONTIGMEM_ENABLE
 config 060_WRITETHROUGH
 	bool "Use write-through caching for 68060 supervisor accesses"
 	depends on ADVANCED && M68060
-	---help---
+	help
 	  The 68060 generally uses copyback caching of recently accessed data.
 	  Copyback caching means that memory writes will be held in an on-chip
 	  cache and only written back to memory some time later.  Saying Y

--- a/arch/m68k/Kconfig.devices
+++ b/arch/m68k/Kconfig.devices
@@ -59,7 +59,7 @@ config NFETH
 config ATARI_ETHERNAT
 	bool "Atari EtherNAT Ethernet support"
 	depends on ATARI
-	---help---
+	help
 	  Say Y to include support for the EtherNAT network adapter for the
 	  CT/60 extension port.

@@ -69,7 +69,7 @@ config ATARI_ETHERNAT
 config ATARI_ETHERNEC
 	bool "Atari EtherNEC Ethernet support"
 	depends on ATARI_ROM_ISA
-	---help---
+	help
 	  Say Y to include support for the EtherNEC network adapter for the
 	  ROM port. The driver works by polling instead of interrupts, so it
 	  is quite slow.
@@ -120,7 +120,7 @@ config HPAPCI
 config SERIAL_CONSOLE
 	bool "Support for serial port console"
 	depends on AMIGA_BUILTIN_SERIAL=y
-	---help---
+	help
 	  If you say Y here, it will be possible to use a serial port as the
 	  system console (the system console is the device which receives all
 	  kernel messages and warnings and which allows logins in single user

--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -437,7 +437,7 @@ config ROMSIZE

 choice
 	prompt "Kernel executes from"
-	---help---
+	help
 	  Choose the memory type that the kernel will be running in.

 config RAMKERNEL

--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -2741,7 +2741,7 @@ config RELOCATION_TABLE_SIZE
 	depends on RELOCATABLE
 	range 0x0 0x01000000
 	default "0x00100000"
-	---help---
+	help
 	  A table of relocation data will be appended to the kernel binary
 	  and parsed at boot to fix up the relocated kernel.

@@ -2755,7 +2755,7 @@ config RELOCATION_TABLE_SIZE
 config RANDOMIZE_BASE
 	bool "Randomize the address of the kernel image"
 	depends on RELOCATABLE
-	---help---
+	help
 	  Randomizes the physical and virtual address at which the
 	  kernel image is loaded, as a security feature that
 	  deters exploit attempts relying on knowledge of the location
@@ -2773,7 +2773,7 @@ config RANDOMIZE_BASE_MAX_OFFSET
 	range 0x0 0x40000000 if EVA || 64BIT
 	range 0x0 0x08000000
 	default "0x01000000"
-	---help---
+	help
 	  When kASLR is active, this provides the maximum offset that will
 	  be applied to the kernel image. It should be set according to the
 	  amount of physical RAM available in the target system minus

--- a/arch/mips/kvm/Kconfig
+++ b/arch/mips/kvm/Kconfig
@@ -6,7 +6,7 @@ source "virt/kvm/Kconfig"

 menuconfig VIRTUALIZATION
 	bool "Virtualization"
-	---help---
+	help
 	  Say Y here to get to see options for using your Linux host to run
 	  other operating systems inside virtual machines (guests).
 	  This option alone does not add any kernel code.
@@ -26,7 +26,7 @@ config KVM
 	select KVM_MMIO
 	select MMU_NOTIFIER
 	select SRCU
-	---help---
+	help
 	  Support for hosting Guest kernels.

 choice
@@ -36,7 +36,7 @@ choice

 config KVM_MIPS_TE
 	bool "Trap & Emulate"
-	---help---
+	help
 	  Use trap and emulate to virtualize 32-bit guests in user mode. This
 	  does not require any special hardware Virtualization support beyond
 	  standard MIPS32/64 r2 or later, but it does require the guest kernel
@@ -45,7 +45,7 @@ config KVM_MIPS_TE

 config KVM_MIPS_VZ
 	bool "MIPS Virtualization (VZ) ASE"
-	---help---
+	help
 	  Use the MIPS Virtualization (VZ) ASE to virtualize guests. This
 	  supports running unmodified guest kernels (with CONFIG_KVM_GUEST=n),
 	  but requires hardware support.
@@ -56,7 +56,7 @@ config KVM_MIPS_DYN_TRANS
 	bool "KVM/MIPS: Dynamic binary translation to reduce traps"
 	depends on KVM_MIPS_TE
 	default y
-	---help---
+	help
 	  When running in Trap & Emulate mode patch privileged
 	  instructions to reduce the number of traps.

@@ -65,7 +65,7 @@ config KVM_MIPS_DYN_TRANS
 config KVM_MIPS_DEBUG_COP0_COUNTERS
 	bool "Maintain counters for COP0 accesses"
 	depends on KVM
-	---help---
+	help
 	  Maintain statistics for Guest COP0 accesses.
 	  A histogram of COP0 accesses is printed when the VM is
 	  shutdown.

--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -147,7 +147,7 @@ choice

 config PA7000
 	bool "PA7000/PA7100"
-	---help---
+	help
 	  This is the processor type of your CPU.  This information is
 	  used for optimizing purposes.  In order to compile a kernel
 	  that can run on all 32-bit PA CPUs (albeit not optimally fast),
@@ -275,7 +275,7 @@ config PARISC_SELF_EXTRACT

 config SMP
 	bool "Symmetric multi-processing support"
-	---help---
+	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
 	  than one CPU, say Y.
@@ -382,7 +382,7 @@ source "drivers/parisc/Kconfig"
 config SECCOMP
 	def_bool y
 	prompt "Enable seccomp to safely compute untrusted bytecode"
-	---help---
+	help
 	  This kernel feature is useful for number crunching applications
 	  that may need to compute untrusted bytecode during their
 	  execution. By using pipes or other transports made available to

--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -7,7 +7,7 @@ source "virt/kvm/Kconfig"

 menuconfig VIRTUALIZATION
 	bool "Virtualization"
-	---help---
+	help
 	  Say Y here to get to see options for using your Linux host to run
 	  other operating systems inside virtual machines (guests).
 	  This option alone does not add any kernel code.
@@ -54,7 +54,7 @@ config KVM_BOOK3S_32
 	select KVM
 	select KVM_BOOK3S_32_HANDLER
 	select KVM_BOOK3S_PR_POSSIBLE
-	---help---
+	help
 	  Support running unmodified book3s_32 guest kernels
 	  in virtual machines on book3s_32 host processors.

@@ -70,7 +70,7 @@ config KVM_BOOK3S_64
 	select KVM
 	select KVM_BOOK3S_PR_POSSIBLE if !KVM_BOOK3S_HV_POSSIBLE
 	select SPAPR_TCE_IOMMU if IOMMU_SUPPORT && (PPC_PSERIES || PPC_POWERNV)
-	---help---
+	help
 	  Support running unmodified book3s_64 and book3s_32 guest kernels
 	  in virtual machines on book3s_64 host processors.

@@ -85,7 +85,7 @@ config KVM_BOOK3S_64_HV
 	select KVM_BOOK3S_HV_POSSIBLE
 	select MMU_NOTIFIER
 	select CMA
-	---help---
+	help
 	  Support running unmodified book3s_64 guest kernels in
 	  virtual machines on POWER7 and newer processors that have
 	  hypervisor mode available to the host.
@@ -104,7 +104,7 @@ config KVM_BOOK3S_64_PR
 	tristate "KVM support without using hypervisor mode in host"
 	depends on KVM_BOOK3S_64
 	select KVM_BOOK3S_PR_POSSIBLE
-	---help---
+	help
 	  Support running guest kernels in virtual machines on processors
 	  without using hypervisor mode in the host, by running the
 	  guest in user mode (problem state) and emulating all
@@ -119,7 +119,7 @@ config KVM_BOOK3S_64_PR
 config KVM_BOOK3S_HV_EXIT_TIMING
 	bool "Detailed timing for hypervisor real-mode code"
 	depends on KVM_BOOK3S_HV_POSSIBLE && DEBUG_FS
-	---help---
+	help
 	  Calculate time taken for each vcpu in the real-mode guest entry,
 	  exit, and interrupt handling code, plus time spent in the guest
 	  and in nap mode due to idle (cede) while other threads are still
@@ -136,7 +136,7 @@ config KVM_BOOKE_HV
 config KVM_EXIT_TIMING
 	bool "Detailed exit timing"
 	depends on KVM_E500V2 || KVM_E500MC
-	---help---
+	help
 	  Calculate elapsed time for every exit/enter cycle. A per-vcpu
 	  report is available in debugfs kvm/vm#_vcpu#_timing.
 	  The overhead is relatively small, however it is not recommended for
@@ -150,7 +150,7 @@ config KVM_E500V2
 	select KVM
 	select KVM_MMIO
 	select MMU_NOTIFIER
-	---help---
+	help
 	  Support running unmodified E500 guest kernels in virtual machines on
 	  E500v2 host processors.

@@ -166,7 +166,7 @@ config KVM_E500MC
 	select KVM_MMIO
 	select KVM_BOOKE_HV
 	select MMU_NOTIFIER
-	---help---
+	help
 	  Support running unmodified E500MC/E5500/E6500 guest kernels in
 	  virtual machines on E500MC/E5500/E6500 host processors.

@@ -194,7 +194,7 @@ config KVM_XICS
 	select HAVE_KVM_IRQCHIP
 	select HAVE_KVM_IRQFD
 	default y
-	---help---
+	help
 	  Include support for the XICS (eXternal Interrupt Controller
 	  Specification) interrupt controller architecture used on
 	  IBM POWER (pSeries) servers.

--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -24,7 +24,7 @@ source "arch/powerpc/platforms/amigaone/Kconfig"
 config KVM_GUEST
 	bool "KVM Guest support"
 	select EPAPR_PARAVIRT
-	---help---
+	help
 	  This option enables various optimizations for running under the KVM
 	  hypervisor. Overhead for the kernel when not running inside KVM should
 	  be minimal.
@@ -230,7 +230,7 @@ config TAU
 config TAU_INT
 	bool "Interrupt driven TAU driver (DANGEROUS)"
 	depends on TAU
-	---help---
+	help
 	  The TAU supports an interrupt driven mode which causes an interrupt
 	  whenever the temperature goes out of range. This is the fastest way
 	  to get notified the temp has exceeded a range. With this option off,
@@ -246,7 +246,7 @@ config TAU_INT
 config TAU_AVERAGE
 	bool "Average high and low temp"
 	depends on TAU
-	---help---
+	help
 	  The TAU hardware can compare the temperature to an upper and lower
 	  bound.  The default behavior is to show both the upper and lower
 	  bound in /proc/cpuinfo. If the range is large, the temperature is

--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -280,7 +280,7 @@ config PHYS_64BIT
 	bool 'Large physical address support' if E500 || PPC_86xx
 	depends on (44x || E500 || PPC_86xx) && !PPC_83xx && !PPC_82xx
 	select PHYS_ADDR_T_64BIT
-	---help---
+	help
 	  This option enables kernel support for larger than 32-bit physical
 	  addresses.  This feature may not be available on all cores.

@@ -293,7 +293,7 @@ config PHYS_64BIT
 config ALTIVEC
 	bool "AltiVec Support"
 	depends on PPC_BOOK3S_32 || PPC_BOOK3S_64 || (PPC_E500MC && PPC64)
-	---help---
+	help
 	  This option enables kernel support for the Altivec extensions to the
 	  PowerPC processor. The kernel currently supports saving and restoring
 	  altivec registers, and turning on the 'altivec enable' bit so user
@@ -309,7 +309,7 @@ config ALTIVEC
 config VSX
 	bool "VSX Support"
 	depends on PPC_BOOK3S_64 && ALTIVEC && PPC_FPU
-	---help---
+	help

 	  This option enables kernel support for the Vector Scaler extensions
 	  to the PowerPC processor. The kernel currently supports saving and
@@ -330,7 +330,7 @@ config SPE
 	bool "SPE Support"
 	depends on SPE_POSSIBLE
 	default y
-	---help---
+	help
 	  This option enables kernel support for the Signal Processing
 	  Extensions (SPE) to the PowerPC processor. The kernel currently
 	  supports saving and restoring SPE registers, and turning on the
@@ -446,7 +446,7 @@ config SMP
 	depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE || PPC_47x
 	select GENERIC_IRQ_MIGRATION
 	bool "Symmetric multi-processing support" if !FORCE_SMP
-	---help---
+	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
 	  than one CPU, say Y.  Note that the kernel does not currently

--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -696,7 +696,7 @@ menu "I/O subsystem"
 config QDIO
 	def_tristate y
 	prompt "QDIO support"
-	---help---
+	help
 	  This driver provides the Queued Direct I/O base support for
 	  IBM System z.


--- a/arch/s390/Kconfig.debug
+++ b/arch/s390/Kconfig.debug
@@ -7,7 +7,7 @@ config S390_PTDUMP
 	bool "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL
 	select DEBUG_FS
-	---help---
+	help
 	  Say Y here if you want to show the kernel pagetable layout in a
 	  debugfs file. This information is only useful for kernel developers
 	  who are working in architecture specific areas of the kernel.

--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -7,7 +7,7 @@ source "virt/kvm/Kconfig"
 menuconfig VIRTUALIZATION
 	def_bool y
 	prompt "KVM"
-	---help---
+	help
 	  Say Y here to get to see options for using your Linux host to run other
 	  operating systems inside virtual machines (guests).
 	  This option alone does not add any kernel code.
@@ -33,7 +33,7 @@ config KVM
 	select HAVE_KVM_NO_POLL
 	select SRCU
 	select KVM_VFIO
-	---help---
+	help
 	  Support hosting paravirtualized guest machines using the SIE
 	  virtualization capability on the mainframe. This should work
 	  on any 64bit machine.
@@ -49,7 +49,7 @@ config KVM
 config KVM_S390_UCONTROL
 	bool "Userspace controlled virtual machines"
 	depends on KVM
-	---help---
+	help
 	  Allow CAP_SYS_ADMIN users to create KVM virtual machines that are
 	  controlled by userspace.


--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -588,7 +588,7 @@ config KEXEC_JUMP
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
 	default MEMORY_START
-	---help---
+	help
 	  This gives the physical address where the kernel is loaded
 	  and is ordinarily the same as MEMORY_START.

@@ -615,7 +615,7 @@ config SECCOMP
 config SMP
 	bool "Symmetric multi-processing support"
 	depends on SYS_SUPPORTS_SMP
-	---help---
+	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
 	  than one CPU, say Y.

--- a/arch/sh/cchips/Kconfig
+++ b/arch/sh/cchips/Kconfig
@@ -11,7 +11,7 @@ choice

 config HD64461
 	bool "Hitachi HD64461 companion chip support"
-	---help---
+	help
 	  The Hitachi HD64461 provides an interface for
 	  the SH7709 CPU, supporting a LCD controller,
 	  CRT color controller, IrDA up to 4 Mbps, and a

--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -44,7 +44,7 @@ config FORCE_MAX_ZONEORDER
 config MEMORY_START
 	hex "Physical memory start address"
 	default "0x08000000"
-	---help---
+	help
 	  Computers built with Hitachi SuperH processors always
 	  map the ROM starting at address zero.  But the processor
 	  does not specify the range that RAM takes.

--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -159,7 +159,7 @@ menu "Processor type and features"

 config SMP
 	bool "Symmetric multi-processing support"
-	---help---
+	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
 	  than one CPU, say Y.
@@ -366,7 +366,7 @@ config SERIAL_CONSOLE
 	bool
 	depends on SPARC32
 	default y
-	---help---
+	help
 	  If you say Y here, it will be possible to use a serial port as the
 	  system console (the system console is the device which receives all
 	  kernel messages and warnings and which allows logins in single user
@@ -393,7 +393,7 @@ config SPARC_LEON
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_UHCI_BIG_ENDIAN_MMIO
 	select USB_UHCI_BIG_ENDIAN_DESC
-	---help---
+	help
 	  If you say Y here if you are running on a SPARC-LEON processor.
 	  The LEON processor is a synthesizable VHDL model of the
 	  SPARC-v8 standard. LEON is  part of the GRLIB collection of
@@ -407,7 +407,7 @@ menu "U-Boot options"
 config UBOOT_LOAD_ADDR
 	hex "uImage Load Address"
 	default 0x40004000
-	---help---
+	help
 	 U-Boot kernel load address, the address in physical address space
 	 where u-boot will place the Linux kernel before booting it.
 	 This address is normally the base address of main memory + 0x4000.
@@ -415,7 +415,7 @@ config UBOOT_LOAD_ADDR
 config UBOOT_FLASH_ADDR
 	hex "uImage.o Load Address"
 	default 0x00080000
-	---help---
+	help
 	 Optional setting only affecting the uImage.o ELF-image used to
 	 download the uImage file to the target using a ELF-loader other than
 	 U-Boot. It may for example be used to download an uImage to FLASH with
@@ -424,7 +424,7 @@ config UBOOT_FLASH_ADDR
 config UBOOT_ENTRY_ADDR
 	hex "uImage Entry Address"
 	default 0xf0004000
-	---help---
+	help
 	 Do not change this unless you know what you're doing. This is
 	 hardcoded by the SPARC32 and LEON port.


--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -179,7 +179,7 @@ config PGTABLE_LEVELS
 config SECCOMP
 	def_bool y
 	prompt "Enable seccomp to safely compute untrusted bytecode"
-	---help---
+	help
 	  This kernel feature is useful for number crunching applications
 	  that may need to compute untrusted bytecode during their
 	  execution. By using pipes or other transports made available to

--- a/arch/um/Kconfig.debug
+++ b/arch/um/Kconfig.debug
@@ -30,7 +30,7 @@ config GCOV
 config EARLY_PRINTK
 	bool "Early printk"
 	default y
-	---help---
+	help
 	  Write kernel log output directly to stdout.

 	  This is useful for kernel debugging when your machine crashes very

--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -4,7 +4,7 @@ choice
 	prompt "Processor family"
 	default M686 if X86_32
 	default GENERIC_CPU if X86_64
-	---help---
+	help
 	  This is the processor type of your CPU. This information is
 	  used for optimizing purposes. In order to compile a kernel
 	  that can run on all supported x86 CPU types (albeit not
@@ -53,21 +53,21 @@ choice
 config M486SX
 	bool "486SX"
 	depends on X86_32
-	---help---
+	help
 	  Select this for an 486-class CPU without an FPU such as
 	  AMD/Cyrix/IBM/Intel SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5S.

 config M486
 	bool "486DX"
 	depends on X86_32
-	---help---
+	help
 	  Select this for an 486-class CPU such as AMD/Cyrix/IBM/Intel
 	  486DX/DX2/DX4 and UMC U5D.

 config M586
 	bool "586/K5/5x86/6x86/6x86MX"
 	depends on X86_32
-	---help---
+	help
 	  Select this for an 586 or 686 series processor such as the AMD K5,
 	  the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
 	  assume the RDTSC (Read Time Stamp Counter) instruction.
@@ -75,21 +75,21 @@ config M586
 config M586TSC
 	bool "Pentium-Classic"
 	depends on X86_32
-	---help---
+	help
 	  Select this for a Pentium Classic processor with the RDTSC (Read
 	  Time Stamp Counter) instruction for benchmarking.

 config M586MMX
 	bool "Pentium-MMX"
 	depends on X86_32
-	---help---
+	help
 	  Select this for a Pentium with the MMX graphics/multimedia
 	  extended instructions.

 config M686
 	bool "Pentium-Pro"
 	depends on X86_32
-	---help---
+	help
 	  Select this for Intel Pentium Pro chips.  This enables the use of
 	  Pentium Pro extended instructions, and disables the init-time guard
 	  against the f00f bug found in earlier Pentiums.
@@ -97,7 +97,7 @@ config M686
 config MPENTIUMII
 	bool "Pentium-II/Celeron(pre-Coppermine)"
 	depends on X86_32
-	---help---
+	help
 	  Select this for Intel chips based on the Pentium-II and
 	  pre-Coppermine Celeron core.  This option enables an unaligned
 	  copy optimization, compiles the kernel with optimization flags
@@ -107,7 +107,7 @@ config MPENTIUMII
 config MPENTIUMIII
 	bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
 	depends on X86_32
-	---help---
+	help
 	  Select this for Intel chips based on the Pentium-III and
 	  Celeron-Coppermine core.  This option enables use of some
 	  extended prefetch instructions in addition to the Pentium II
@@ -116,14 +116,14 @@ config MPENTIUMIII
 config MPENTIUMM
 	bool "Pentium M"
 	depends on X86_32
-	---help---
+	help
 	  Select this for Intel Pentium M (not Pentium-4 M)
 	  notebook chips.

 config MPENTIUM4
 	bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
 	depends on X86_32
-	---help---
+	help
 	  Select this for Intel Pentium 4 chips.  This includes the
 	  Pentium 4, Pentium D, P4-based Celeron and Xeon, and
 	  Pentium-4 M (not Pentium M) chips.  This option enables compile
@@ -159,7 +159,7 @@ config MPENTIUM4
 config MK6
 	bool "K6/K6-II/K6-III"
 	depends on X86_32
-	---help---
+	help
 	  Select this for an AMD K6-family processor.  Enables use of
 	  some extended instructions, and passes appropriate optimization
 	  flags to GCC.
@@ -167,14 +167,14 @@ config MK6
 config MK7
 	bool "Athlon/Duron/K7"
 	depends on X86_32
-	---help---
+	help
 	  Select this for an AMD Athlon K7-family processor.  Enables use of
 	  some extended instructions, and passes appropriate optimization
 	  flags to GCC.

 config MK8
 	bool "Opteron/Athlon64/Hammer/K8"
-	---help---
+	help
 	  Select this for an AMD Opteron or Athlon64 Hammer-family processor.
 	  Enables use of some extended instructions, and passes appropriate
 	  optimization flags to GCC.
@@ -182,7 +182,7 @@ config MK8
 config MCRUSOE
 	bool "Crusoe"
 	depends on X86_32
-	---help---
+	help
 	  Select this for a Transmeta Crusoe processor.  Treats the processor
 	  like a 586 with TSC, and sets some GCC optimization flags (like a
 	  Pentium Pro with no alignment requirements).
@@ -190,13 +190,13 @@ config MCRUSOE
 config MEFFICEON
 	bool "Efficeon"
 	depends on X86_32
-	---help---
+	help
 	  Select this for a Transmeta Efficeon processor.

 config MWINCHIPC6
 	bool "Winchip-C6"
 	depends on X86_32
-	---help---
+	help
 	  Select this for an IDT Winchip C6 chip.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
 	  and alignment requirements.
@@ -204,7 +204,7 @@ config MWINCHIPC6
 config MWINCHIP3D
 	bool "Winchip-2/Winchip-2A/Winchip-3"
 	depends on X86_32
-	---help---
+	help
 	  Select this for an IDT Winchip-2, 2A or 3.  Linux and GCC
 	  treat this chip as a 586TSC with some extended instructions
 	  and alignment requirements.  Also enable out of order memory
@@ -214,7 +214,7 @@ config MWINCHIP3D
 config MELAN
 	bool "AMD Elan"
 	depends on X86_32
-	---help---
+	help
 	  Select this for an AMD Elan processor.

 	  Do not use this option for K6/Athlon/Opteron processors!
@@ -222,19 +222,19 @@ config MELAN
 config MGEODEGX1
 	bool "GeodeGX1"
 	depends on X86_32
-	---help---
+	help
 	  Select this for a Geode GX1 (Cyrix MediaGX) chip.

 config MGEODE_LX
 	bool "Geode GX/LX"
 	depends on X86_32
-	---help---
+	help
 	  Select this for AMD Geode GX and LX processors.

 config MCYRIXIII
 	bool "CyrixIII/VIA-C3"
 	depends on X86_32
-	---help---
+	help
 	  Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
 	  treat this chip as a generic 586. Whilst the CPU is 686 class,
 	  it lacks the cmov extension which gcc assumes is present when
@@ -246,7 +246,7 @@ config MCYRIXIII
 config MVIAC3_2
 	bool "VIA C3-2 (Nehemiah)"
 	depends on X86_32
-	---help---
+	help
 	  Select this for a VIA C3 "Nehemiah". Selecting this enables usage
 	  of SSE and tells gcc to treat the CPU as a 686.
 	  Note, this kernel will not boot on older (pre model 9) C3s.
@@ -254,14 +254,14 @@ config MVIAC3_2
 config MVIAC7
 	bool "VIA C7"
 	depends on X86_32
-	---help---
+	help
 	  Select this for a VIA C7.  Selecting this uses the correct cache
 	  shift and tells gcc to treat the CPU as a 686.

 config MPSC
 	bool "Intel P4 / older Netburst based Xeon"
 	depends on X86_64
-	---help---
+	help
 	  Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
 	  Xeon CPUs with Intel 64bit which is compatible with x86-64.
 	  Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
@@ -271,7 +271,7 @@ config MPSC

 config MCORE2
 	bool "Core 2/newer Xeon"
-	---help---
+	help

 	  Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and
 	  53xx) CPUs. You can distinguish newer from older Xeons by the CPU
@@ -280,7 +280,7 @@ config MCORE2

 config MATOM
 	bool "Intel Atom"
-	---help---
+	help

 	  Select this for the Intel Atom platform. Intel Atom CPUs have an
 	  in-order pipelining architecture and thus can benefit from
@@ -290,7 +290,7 @@ config MATOM
 config GENERIC_CPU
 	bool "Generic-x86-64"
 	depends on X86_64
-	---help---
+	help
 	  Generic x86-64 CPU.
 	  Run equally well on all x86-64 CPUs.

@@ -299,7 +299,7 @@ endchoice
 config X86_GENERIC
 	bool "Generic x86 support"
 	depends on X86_32
-	---help---
+	help
 	  Instead of just including optimizations for the selected
 	  x86 variant (e.g. PII, Crusoe or Athlon), include some more
 	  generic optimizations as well. This will make the kernel
@@ -397,14 +397,14 @@ config X86_VMX_FEATURE_NAMES

 menuconfig PROCESSOR_SELECT
 	bool "Supported processor vendors" if EXPERT
-	---help---
+	help
 	  This lets you choose what x86 vendor support code your kernel
 	  will include.

 config CPU_SUP_INTEL
 	default y
 	bool "Support Intel processors" if PROCESSOR_SELECT
-	---help---
+	help
 	  This enables detection, tunings and quirks for Intel processors

 	  You need this enabled if you want your kernel to run on an
@@ -418,7 +418,7 @@ config CPU_SUP_CYRIX_32
 	default y
 	bool "Support Cyrix processors" if PROCESSOR_SELECT
 	depends on M486SX || M486 || M586 || M586TSC || M586MMX || (EXPERT && !64BIT)
-	---help---
+	help
 	  This enables detection, tunings and quirks for Cyrix processors

 	  You need this enabled if you want your kernel to run on a
@@ -431,7 +431,7 @@ config CPU_SUP_CYRIX_32
 config CPU_SUP_AMD
 	default y
 	bool "Support AMD processors" if PROCESSOR_SELECT
-	---help---
+	help
 	  This enables detection, tunings and quirks for AMD processors

 	  You need this enabled if you want your kernel to run on an
@@ -458,7 +458,7 @@ config CPU_SUP_HYGON
 config CPU_SUP_CENTAUR
 	default y
 	bool "Support Centaur processors" if PROCESSOR_SELECT
-	---help---
+	help
 	  This enables detection, tunings and quirks for Centaur processors

 	  You need this enabled if you want your kernel to run on a
@@ -472,7 +472,7 @@ config CPU_SUP_TRANSMETA_32
 	default y
 	bool "Support Transmeta processors" if PROCESSOR_SELECT
 	depends on !64BIT
-	---help---
+	help
 	  This enables detection, tunings and quirks for Transmeta processors

 	  You need this enabled if you want your kernel to run on a
@@ -486,7 +486,7 @@ config CPU_SUP_UMC_32
 	default y
 	bool "Support UMC processors" if PROCESSOR_SELECT
 	depends on M486SX || M486 || (EXPERT && !64BIT)
-	---help---
+	help
 	  This enables detection, tunings and quirks for UMC processors

 	  You need this enabled if you want your kernel to run on a

--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -9,7 +9,7 @@ config EARLY_PRINTK_USB
 config X86_VERBOSE_BOOTUP
 	bool "Enable verbose x86 bootup info messages"
 	default y
-	---help---
+	help
 	  Enables the informational output from the decompression stage
 	  (e.g. bzImage) of the boot. If you disable this you will still
 	  see errors. Disable this if you want silent bootup.
@@ -17,7 +17,7 @@ config X86_VERBOSE_BOOTUP
 config EARLY_PRINTK
 	bool "Early printk" if EXPERT
 	default y
-	---help---
+	help
 	  Write kernel log output directly into the VGA buffer or to a serial
 	  port.

@@ -31,7 +31,7 @@ config EARLY_PRINTK_DBGP
 	bool "Early printk via EHCI debug port"
 	depends on EARLY_PRINTK && PCI
 	select EARLY_PRINTK_USB
-	---help---
+	help
 	  Write kernel log output directly into the EHCI debug port.

 	  This is useful for kernel debugging when your machine crashes very
@@ -44,7 +44,7 @@ config EARLY_PRINTK_USB_XDBC
 	bool "Early printk via the xHCI debug port"
 	depends on EARLY_PRINTK && PCI
 	select EARLY_PRINTK_USB
-	---help---
+	help
 	  Write kernel log output directly into the xHCI debug port.

 	  One use for this feature is kernel debugging, for example when your
@@ -66,7 +66,7 @@ config EFI_PGT_DUMP
 	bool "Dump the EFI pagetable"
 	depends on EFI
 	select PTDUMP_CORE
-	---help---
+	help
 	  Enable this if you want to dump the EFI page table before
 	  enabling virtual mode. This can be used to debug miscellaneous
 	  issues with the mapping of the EFI runtime regions into that
@@ -75,7 +75,7 @@ config EFI_PGT_DUMP
 config DEBUG_TLBFLUSH
 	bool "Set upper limit of TLB entries to flush one-by-one"
 	depends on DEBUG_KERNEL
-	---help---
+	help

 	X86-only for now.

@@ -95,7 +95,7 @@ config IOMMU_DEBUG
 	bool "Enable IOMMU debugging"
 	depends on GART_IOMMU && DEBUG_KERNEL
 	depends on X86_64
-	---help---
+	help
 	  Force the IOMMU to on even when you have less than 4GB of
 	  memory and add debugging code. On overflow always panic. And
 	  allow to enable IOMMU leak tracing. Can be disabled at boot
@@ -110,7 +110,7 @@ config IOMMU_DEBUG
 config IOMMU_LEAK
 	bool "IOMMU leak tracing"
 	depends on IOMMU_DEBUG && DMA_API_DEBUG
-	---help---
+	help
 	  Add a simple leak tracer to the IOMMU code. This is useful when you
 	  are debugging a buggy device driver that leaks IOMMU mappings.

@@ -121,7 +121,7 @@ config X86_DECODER_SELFTEST
 	bool "x86 instruction decoder selftest"
 	depends on DEBUG_KERNEL && INSTRUCTION_DECODER
 	depends on !COMPILE_TEST
-	---help---
+	help
 	 Perform x86 instruction decoder selftests at build time.
 	 This option is useful for checking the sanity of x86 instruction
 	 decoder code.
@@ -133,25 +133,25 @@ choice

 config IO_DELAY_0X80
 	bool "port 0x80 based port-IO delay [recommended]"
-	---help---
+	help
 	  This is the traditional Linux IO delay used for in/out_p.
 	  It is the most tested hence safest selection here.

 config IO_DELAY_0XED
 	bool "port 0xed based port-IO delay"
-	---help---
+	help
 	  Use port 0xed as the IO delay. This frees up port 0x80 which is
 	  often used as a hardware-debug port.

 config IO_DELAY_UDELAY
 	bool "udelay based port-IO delay"
-	---help---
+	help
 	  Use udelay(2) as the IO delay method. This provides the delay
 	  while not having any side-effect on the IO port space.

 config IO_DELAY_NONE
 	bool "no port-IO delay"
-	---help---
+	help
 	  No port-IO delay. Will break on old boxes that require port-IO
 	  delay for certain operations. Should work on most new machines.

@@ -161,19 +161,19 @@ config DEBUG_BOOT_PARAMS
 	bool "Debug boot parameters"
 	depends on DEBUG_KERNEL
 	depends on DEBUG_FS
-	---help---
+	help
 	  This option will cause struct boot_params to be exported via debugfs.

 config CPA_DEBUG
 	bool "CPA self-test code"
 	depends on DEBUG_KERNEL
-	---help---
+	help
 	  Do change_page_attr() self-tests every 30 seconds.

 config DEBUG_ENTRY
 	bool "Debug low-level entry code"
 	depends on DEBUG_KERNEL
-	---help---
+	help
 	  This option enables sanity checks in x86's low-level entry code.
 	  Some of these sanity checks may slow down kernel entries and
 	  exits or otherwise impact performance.
@@ -183,7 +183,7 @@ config DEBUG_ENTRY
 config DEBUG_NMI_SELFTEST
 	bool "NMI Selftest"
 	depends on DEBUG_KERNEL && X86_LOCAL_APIC
-	---help---
+	help
 	  Enabling this option turns on a quick NMI selftest to verify
 	  that the NMI behaves correctly.

@@ -195,7 +195,7 @@ config DEBUG_NMI_SELFTEST
 config DEBUG_IMR_SELFTEST
 	bool "Isolated Memory Region self test"
 	depends on INTEL_IMR
-	---help---
+	help
 	  This option enables automated sanity testing of the IMR code.
 	  Some simple tests are run to verify IMR bounds checking, alignment
 	  and overlapping. This option is really only useful if you are
@@ -208,7 +208,7 @@ config X86_DEBUG_FPU
 	bool "Debug the x86 FPU code"
 	depends on DEBUG_KERNEL
 	default y
-	---help---
+	help
 	  If this option is enabled then there will be extra sanity
 	  checks and (boot time) debug printouts added to the kernel.
 	  This debugging adds some small amount of runtime overhead
@@ -221,7 +221,7 @@ config PUNIT_ATOM_DEBUG
 	depends on PCI
 	select DEBUG_FS
 	select IOSF_MBI
-	---help---
+	help
 	  This is a debug driver, which gets the power states
 	  of all Punit North Complex devices. The power states of
 	  each device is exposed as part of the debugfs interface.
@@ -232,7 +232,7 @@ choice
 	prompt "Choose kernel unwinder"
 	default UNWINDER_ORC if X86_64
 	default UNWINDER_FRAME_POINTER if X86_32
-	---help---
+	help
 	  This determines which method will be used for unwinding kernel stack
 	  traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack,
 	  livepatch, lockdep, and more.
@@ -241,7 +241,7 @@ config UNWINDER_ORC
 	bool "ORC unwinder"
 	depends on X86_64
 	select STACK_VALIDATION
-	---help---
+	help
 	  This option enables the ORC (Oops Rewind Capability) unwinder for
 	  unwinding kernel stack traces.  It uses a custom data format which is
 	  a simplified version of the DWARF Call Frame Information standard.
@@ -256,7 +256,7 @@ config UNWINDER_ORC
 config UNWINDER_FRAME_POINTER
 	bool "Frame pointer unwinder"
 	select FRAME_POINTER
-	---help---
+	help
 	  This option enables the frame pointer unwinder for unwinding kernel
 	  stack traces.

@@ -268,7 +268,7 @@ config UNWINDER_GUESS
 	bool "Guess unwinder"
 	depends on EXPERT
 	depends on !STACKDEPOT
-	---help---
+	help
 	  This option enables the "guess" unwinder for unwinding kernel stack
 	  traces.  It scans the stack and reports every kernel text address it
 	  finds.  Some of the addresses it reports may be incorrect.

--- a/arch/x86/events/Kconfig
+++ b/arch/x86/events/Kconfig
@@ -5,7 +5,7 @@ config PERF_EVENTS_INTEL_UNCORE
 	tristate "Intel uncore performance events"
 	depends on PERF_EVENTS && CPU_SUP_INTEL && PCI
 	default y
-	---help---
+	help
 	Include support for Intel uncore performance events. These are
 	available on NehalemEX and more modern processors.

@@ -13,7 +13,7 @@ config PERF_EVENTS_INTEL_RAPL
 	tristate "Intel/AMD rapl performance events"
 	depends on PERF_EVENTS && (CPU_SUP_INTEL || CPU_SUP_AMD) && PCI
 	default y
-	---help---
+	help
 	Include support for Intel and AMD rapl performance events for power
 	monitoring on modern processors.

@@ -21,14 +21,14 @@ config PERF_EVENTS_INTEL_CSTATE
 	tristate "Intel cstate performance events"
 	depends on PERF_EVENTS && CPU_SUP_INTEL && PCI
 	default y
-	---help---
+	help
 	Include support for Intel cstate performance events for power
 	monitoring on modern processors.

 config PERF_EVENTS_AMD_POWER
 	depends on PERF_EVENTS && CPU_SUP_AMD
 	tristate "AMD Processor Power Reporting Mechanism"
-	---help---
+	help
 	  Provide power reporting mechanism support for AMD processors.
 	  Currently, it leverages X86_FEATURE_ACC_POWER
 	  (CPUID Fn8000_0007_EDX[12]) interface to calculate the

--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -9,7 +9,7 @@ menuconfig VIRTUALIZATION
 	bool "Virtualization"
 	depends on HAVE_KVM || X86
 	default y
-	---help---
+	help
 	  Say Y here to get to see options for using your Linux host to run other
 	  operating systems inside virtual machines (guests).
 	  This option alone does not add any kernel code.
@@ -45,7 +45,7 @@ config KVM
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
 	select KVM_VFIO
 	select SRCU
-	---help---
+	help
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent
 	  processor equipped with virtualization extensions. You will also
@@ -75,7 +75,7 @@ config KVM_WERROR
 config KVM_INTEL
 	tristate "KVM for Intel (and compatible) processors support"
 	depends on KVM && IA32_FEAT_CTL
-	---help---
+	help
 	  Provides support for KVM on processors equipped with Intel's VT
 	  extensions, a.k.a. Virtual Machine Extensions (VMX).

@@ -85,7 +85,7 @@ config KVM_INTEL
 config KVM_AMD
 	tristate "KVM for AMD processors support"
 	depends on KVM
-	---help---
+	help
 	  Provides support for KVM on AMD processors equipped with the AMD-V
 	  (SVM) extensions.

@@ -97,13 +97,13 @@ config KVM_AMD_SEV
 	bool "AMD Secure Encrypted Virtualization (SEV) support"
 	depends on KVM_AMD && X86_64
 	depends on CRYPTO_DEV_SP_PSP && !(KVM_AMD=y && CRYPTO_DEV_CCP_DD=m)
-	---help---
+	help
 	Provides support for launching Encrypted VMs on AMD processors.

 config KVM_MMU_AUDIT
 	bool "Audit KVM MMU"
 	depends on KVM && TRACEPOINTS
-	---help---
+	help
 	 This option adds a R/W kVM module parameter 'mmu_audit', which allows
 	 auditing of KVM MMU events at runtime.


--- a/arch/x86/ras/Kconfig
+++ b/arch/x86/ras/Kconfig
@@ -2,7 +2,7 @@
 config RAS_CEC
 	bool "Correctable Errors Collector"
 	depends on X86_MCE && MEMORY_FAILURE && DEBUG_FS
-	---help---
+	help
 	  This is a small cache which collects correctable memory errors per 4K
 	  page PFN and counts their repeated occurrence. Once the counter for a
 	  PFN overflows, we try to soft-offline that page as we take it to mean

--- a/block/Kconfig
+++ b/block/Kconfig
@@ -66,7 +66,7 @@ config BLK_DEV_BSGLIB

 config BLK_DEV_INTEGRITY
 	bool "Block layer data integrity support"
-	---help---
+	help
 	Some storage devices allow extra information to be
 	stored/retrieved to help protect the data.  The block layer
 	data integrity option provides hooks which can be used by
@@ -84,7 +84,7 @@ config BLK_DEV_INTEGRITY_T10
 config BLK_DEV_ZONED
 	bool "Zoned block device support"
 	select MQ_IOSCHED_DEADLINE
-	---help---
+	help
 	Block layer zoned block device support. This option enables
 	support for ZAC/ZBC host-managed and host-aware zoned block devices.

@@ -94,7 +94,7 @@ config BLK_DEV_THROTTLING
 	bool "Block layer bio throttling support"
 	depends on BLK_CGROUP=y
 	select BLK_CGROUP_RWSTAT
-	---help---
+	help
 	Block layer bio throttling support. It can be used to limit
 	the IO rate to a device. IO rate policies are per cgroup and
 	one needs to mount and use blkio cgroup controller for creating
@@ -105,7 +105,7 @@ config BLK_DEV_THROTTLING
 config BLK_DEV_THROTTLING_LOW
 	bool "Block throttling .low limit interface support (EXPERIMENTAL)"
 	depends on BLK_DEV_THROTTLING
-	---help---
+	help
 	Add .low limit interface for block throttling. The low limit is a best
 	effort limit to prioritize cgroups. Depending on the setting, the limit
 	can be used to protect cgroups in terms of bandwidth/iops and better
@@ -115,7 +115,7 @@ config BLK_DEV_THROTTLING_LOW

 config BLK_CMDLINE_PARSER
 	bool "Block device command line partition parser"
-	---help---
+	help
 	Enabling this option allows you to specify the partition layout from
 	the kernel boot args.  This is typically of use for embedded devices
 	which don't otherwise have any standardized method for listing the
@@ -125,7 +125,7 @@ config BLK_CMDLINE_PARSER

 config BLK_WBT
 	bool "Enable support for block device writeback throttling"
-	---help---
+	help
 	Enabling this option enables the block layer to throttle buffered
 	background writeback from the VM, making it more smooth and having
 	less impact on foreground operations. The throttling is done
@@ -135,7 +135,7 @@ config BLK_WBT
 config BLK_CGROUP_IOLATENCY
 	bool "Enable support for latency based cgroup IO protection"
 	depends on BLK_CGROUP=y
-	---help---
+	help
 	Enabling this option enables the .latency interface for IO throttling.
 	The IO controller will attempt to maintain average IO latencies below
 	the configured latency target, throttling anybody with a higher latency
@@ -148,7 +148,7 @@ config BLK_CGROUP_IOCOST
 	depends on BLK_CGROUP=y
 	select BLK_RQ_IO_DATA_LEN
 	select BLK_RQ_ALLOC_TIME
-	---help---
+	help
 	Enabling this option enables the .weight interface for cost
 	model based proportional IO control.  The IO controller
 	distributes IO capacity between different groups based on
@@ -158,7 +158,7 @@ config BLK_WBT_MQ
 	bool "Multiqueue writeback throttling"
 	default y
 	depends on BLK_WBT
-	---help---
+	help
 	Enable writeback throttling by default on multiqueue devices.
 	Multiqueue currently doesn't have support for IO scheduling,
 	enabling this option is recommended.
@@ -167,7 +167,7 @@ config BLK_DEBUG_FS
 	bool "Block layer debugging information in debugfs"
 	default y
 	depends on DEBUG_FS
-	---help---
+	help
 	Include block layer debugging information in debugfs. This information
 	is mostly useful for kernel developers, but it doesn't incur any cost
 	at runtime.
@@ -181,7 +181,7 @@ config BLK_DEBUG_FS_ZONED

 config BLK_SED_OPAL
 	bool "Logic for interfacing with Opal enabled SEDs"
-	---help---
+	help
 	Builds Logic for interfacing with Opal enabled controllers.
 	Enabling this option enables users to setup/unlock/lock
 	Locking ranges for SED devices using the Opal protocol.

--- a/block/Kconfig.iosched
+++ b/block/Kconfig.iosched
@@ -6,13 +6,13 @@ menu "IO Schedulers"
 config MQ_IOSCHED_DEADLINE
 	tristate "MQ deadline I/O scheduler"
 	default y
-	---help---
+	help
 	  MQ version of the deadline IO scheduler.

 config MQ_IOSCHED_KYBER
 	tristate "Kyber I/O scheduler"
 	default y
-	---help---
+	help
 	  The Kyber I/O scheduler is a low-overhead scheduler suitable for
 	  multiqueue and other fast devices. Given target latencies for reads and
 	  synchronous writes, it will self-tune queue depths to achieve that
@@ -20,7 +20,7 @@ config MQ_IOSCHED_KYBER

 config IOSCHED_BFQ
 	tristate "BFQ I/O scheduler"
-	---help---
+	help
 	BFQ I/O scheduler for BLK-MQ. BFQ distributes the bandwidth of
 	of the device among all processes according to their weights,
 	regardless of the device parameters and with any workload. It
@@ -32,7 +32,7 @@ config BFQ_GROUP_IOSCHED
       bool "BFQ hierarchical scheduling support"
       depends on IOSCHED_BFQ && BLK_CGROUP
       select BLK_CGROUP_RWSTAT
-       ---help---
+	help

       Enable hierarchical scheduling in BFQ, using the blkio
       (cgroups-v1) or io (cgroups-v2) controller.
@@ -40,7 +40,7 @@ config BFQ_GROUP_IOSCHED
 config BFQ_CGROUP_DEBUG
 	bool "BFQ IO controller debugging"
 	depends on BFQ_GROUP_IOSCHED
-	---help---
+	help
 	Enable some debugging help. Currently it exports additional stat
 	files in a cgroup which can be useful for debugging.


--- a/block/partitions/Kconfig
+++ b/block/partitions/Kconfig
@@ -156,7 +156,7 @@ config SOLARIS_X86_PARTITION
 config UNIXWARE_DISKLABEL
 	bool "Unixware slices support"
 	depends on PARTITION_ADVANCED && MSDOS_PARTITION
-	---help---
+	help
 	  Like some systems, UnixWare uses its own slice table inside a
 	  partition (VTOC - Virtual Table of Contents). Its format is
 	  incompatible with all other OSes. Saying Y here allows you to read
@@ -176,7 +176,7 @@ config UNIXWARE_DISKLABEL
 config LDM_PARTITION
 	bool "Windows Logical Disk Manager (Dynamic Disk) support"
 	depends on PARTITION_ADVANCED
-	---help---
+	help
 	  Say Y here if you would like to use hard disks under Linux which
 	  were partitioned using Windows 2000's/XP's or Vista's Logical Disk
 	  Manager.  They are also known as "Dynamic Disks".
@@ -226,7 +226,7 @@ config ULTRIX_PARTITION
 config SUN_PARTITION
 	bool "Sun partition tables support" if PARTITION_ADVANCED
 	default y if (SPARC || SUN3 || SUN3X)
-	---help---
+	help
 	  Like most systems, SunOS uses its own hard disk partition table
 	  format, incompatible with all others. Saying Y here allows you to
 	  read these partition tables and further mount SunOS partitions from

--- a/drivers/accessibility/Kconfig
+++ b/drivers/accessibility/Kconfig
 # SPDX-License-Identifier: GPL-2.0
 menuconfig ACCESSIBILITY
 	bool "Accessibility support"
-	---help---
+	help
 	  Accessibility handles all special kinds of hardware devices or
 	  software adapters which help people with disabilities (e.g.
 	  blindness) to use computers.
@@ -21,7 +21,7 @@ config A11Y_BRAILLE_CONSOLE
 	bool "Console on braille device"
 	depends on VT
 	depends on SERIAL_CORE_CONSOLE
-	---help---
+	help
 	  Enables console output on a braille device connected to a 8250
 	  serial port. For now only the VisioBraille device is supported.


--- a/drivers/android/Kconfig
+++ b/drivers/android/Kconfig
@@ -3,7 +3,7 @@ menu "Android"

 config ANDROID
 	bool "Android Drivers"
-	---help---
+	help
 	  Enable support for various drivers needed on the Android platform

 if ANDROID
@@ -12,7 +12,7 @@ config ANDROID_BINDER_IPC
 	bool "Android Binder IPC Driver"
 	depends on MMU
 	default n
-	---help---
+	help
 	  Binder is used in Android for both communication between processes,
 	  and remote method invocation.

@@ -24,7 +24,7 @@ config ANDROID_BINDERFS
 	bool "Android Binderfs filesystem"
 	depends on ANDROID_BINDER_IPC
 	default n
-	---help---
+	help
 	  Binderfs is a pseudo-filesystem for the Android Binder IPC driver
 	  which can be mounted per-ipc namespace allowing to run multiple
 	  instances of Android.
@@ -36,7 +36,7 @@ config ANDROID_BINDER_DEVICES
 	string "Android Binder devices"
 	depends on ANDROID_BINDER_IPC
 	default "binder,hwbinder,vndbinder"
-	---help---
+	help
 	  Default value for the binder.devices parameter.

 	  The binder.devices parameter is a comma-separated list of strings
@@ -47,7 +47,7 @@ config ANDROID_BINDER_DEVICES
 config ANDROID_BINDER_IPC_SELFTEST
 	bool "Android Binder IPC Driver Selftest"
 	depends on ANDROID_BINDER_IPC
-	---help---
+	help
 	  This feature allows binder selftest to run.

 	  Binder selftest checks the allocation and free of binder buffers

--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -17,7 +17,7 @@ menuconfig ATA
 	depends on BLOCK
 	select SCSI
 	select GLOB
-	---help---
+	help
 	  If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
 	  any other ATA device under Linux, say Y and make sure that you know
 	  the name of your ATA host adapter (the card inside your computer

--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -7,7 +7,7 @@ menuconfig ATM_DRIVERS
 	bool "ATM drivers"
 	depends on NETDEVICES && ATM
 	default y
-	---help---
+	help
 	  Say Y here to get to see options for Asynchronous Transfer Mode
 	  device drivers. This option alone does not add any kernel code.

@@ -40,7 +40,7 @@ config ATM_LANAI
 config ATM_ENI
 	tristate "Efficient Networks ENI155P"
 	depends on PCI
-	---help---
+	help
 	  Driver for the Efficient Networks ENI155p series and SMC ATM
 	  Power155 155 Mbps ATM adapters. Both, the versions with 512KB and
 	  2MB on-board RAM (Efficient calls them "C" and "S", respectively),
@@ -64,7 +64,7 @@ config ATM_ENI_DEBUG
 config ATM_ENI_TUNE_BURST
 	bool "Fine-tune burst settings"
 	depends on ATM_ENI
-	---help---
+	help
 	  In order to obtain good throughput, the ENI NIC can transfer
 	  multiple words of data per PCI bus access cycle. Such a multi-word
 	  transfer is called a burst.
@@ -256,7 +256,7 @@ config ATM_AMBASSADOR
 config ATM_AMBASSADOR_DEBUG
 	bool "Enable debugging messages"
 	depends on ATM_AMBASSADOR
-	---help---
+	help
 	  Somewhat useful debugging messages are available. The choice of
 	  messages is controlled by a bitmap.  This may be specified as a
 	  module argument (kernel command line argument as well?), changed
@@ -280,7 +280,7 @@ config ATM_HORIZON
 config ATM_HORIZON_DEBUG
 	bool "Enable debugging messages"
 	depends on ATM_HORIZON
-	---help---
+	help
 	  Somewhat useful debugging messages are available. The choice of
 	  messages is controlled by a bitmap.  This may be specified as a
 	  module argument (kernel command line argument as well?), changed
@@ -296,7 +296,7 @@ config ATM_HORIZON_DEBUG
 config ATM_IA
 	tristate "Interphase ATM PCI x575/x525/x531"
 	depends on PCI
-	---help---
+	help
 	  This is a driver for the Interphase (i)ChipSAR adapter cards
 	  which include a variety of variants in term of the size of the
 	  control memory (128K-1KVC, 512K-4KVC), the size of the packet
@@ -312,7 +312,7 @@ config ATM_IA
 config ATM_IA_DEBUG
 	bool "Enable debugging messages"
 	depends on ATM_IA
-	---help---
+	help
 	  Somewhat useful debugging messages are available. The choice of
 	  messages is controlled by a bitmap. This may be specified as a
 	  module argument (kernel command line argument as well?), changed
@@ -330,7 +330,7 @@ config ATM_FORE200E
 	tristate "FORE Systems 200E-series"
 	depends on (PCI || SBUS)
 	select FW_LOADER
-	---help---
+	help
 	  This is a driver for the FORE Systems 200E-series ATM adapter
 	  cards. It simultaneously supports PCA-200E and SBA-200E models
 	  on PCI and SBUS hosts. Say Y (or M to compile as a module
@@ -352,7 +352,7 @@ config ATM_FORE200E_TX_RETRY
 	int "Maximum number of tx retries"
 	depends on ATM_FORE200E
 	default "16"
-	---help---
+	help
 	  Specifies the number of times the driver attempts to transmit
 	  a message before giving up, if the transmit queue of the ATM card
 	  is transiently saturated.

--- a/drivers/auxdisplay/Kconfig
+++ b/drivers/auxdisplay/Kconfig
@@ -8,7 +8,7 @@

 menuconfig AUXDISPLAY
 	bool "Auxiliary Display support"
-	---help---
+	help
 	  Say Y here to get to see options for auxiliary display drivers.
 	  This option alone does not add any kernel code.

@@ -20,7 +20,7 @@ config HD44780
 	tristate "HD44780 Character LCD support"
 	depends on GPIOLIB || COMPILE_TEST
 	select CHARLCD
-	---help---
+	help
 	  Enable support for Character LCDs using a HD44780 controller.
 	  The LCD is accessible through the /dev/lcd char device (10, 156).
 	  This code can either be compiled as a module, or linked into the
@@ -31,7 +31,7 @@ config KS0108
 	tristate "KS0108 LCD Controller"
 	depends on PARPORT_PC
 	default n
-	---help---
+	help
 	  If you have a LCD controlled by one or more KS0108
 	  controllers, say Y. You will need also another more specific
 	  driver for your LCD.
@@ -49,7 +49,7 @@ config KS0108_PORT
 	hex "Parallel port where the LCD is connected"
 	depends on KS0108
 	default 0x378
-	---help---
+	help
 	  The address of the parallel port where the LCD is connected.

 	  The first  standard parallel port address is 0x378.
@@ -71,7 +71,7 @@ config KS0108_DELAY
 	int "Delay between each control writing (microseconds)"
 	depends on KS0108
 	default "2"
-	---help---
+	help
 	  Amount of time the ks0108 should wait between each control write
 	  to the parallel port.

@@ -92,7 +92,7 @@ config CFAG12864B
 	select FB_SYS_IMAGEBLIT
 	select FB_SYS_FOPS
 	default n
-	---help---
+	help
 	  If you have a Crystalfontz 128x64 2-color LCD, cfag12864b Series,
 	  say Y. You also need the ks0108 LCD Controller driver.

@@ -114,7 +114,7 @@ config CFAG12864B_RATE
 	int "Refresh rate (hertz)"
 	depends on CFAG12864B
 	default "20"
-	---help---
+	help
 	  Refresh rate of the LCD.

 	  As the LCD is not memory mapped, the driver has to make the work by
@@ -168,7 +168,7 @@ menuconfig PARPORT_PANEL
 	tristate "Parallel port LCD/Keypad Panel support"
 	depends on PARPORT
 	select CHARLCD
-	---help---
+	help
 	  Say Y here if you have an HD44780 or KS-0074 LCD connected to your
 	  parallel port. This driver also features 4 and 6-key keypads. The LCD
 	  is accessible through the /dev/lcd char device (10, 156), and the
@@ -182,7 +182,7 @@ config PANEL_PARPORT
 	int "Default parallel port number (0=LPT1)"
 	range 0 255
 	default "0"
-	---help---
+	help
 	  This is the index of the parallel port the panel is connected to. One
 	  driver instance only supports one parallel port, so if your keypad
 	  and LCD are connected to two separate ports, you have to start two
@@ -193,7 +193,7 @@ config PANEL_PROFILE
 	int "Default panel profile (0-5, 0=custom)"
 	range 0 5
 	default "5"
-	---help---
+	help
 	  To ease configuration, the driver supports different configuration
 	  profiles for past and recent wirings. These profiles can also be
 	  used to define an approximative configuration, completed by a few
@@ -215,7 +215,7 @@ config PANEL_KEYPAD
 	int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)"
 	range 0 3
 	default 0
-	---help---
+	help
 	  This enables and configures a keypad connected to the parallel port.
 	  The keys will be read from character device 10,185. Valid values are :

@@ -232,7 +232,7 @@ config PANEL_LCD
 	int "LCD type (0=none, 1=custom, 2=old //, 3=ks0074, 4=hantronix, 5=Nexcom)"
 	range 0 5
 	default 0
-	---help---
+	help
 	   This enables and configures an LCD connected to the parallel port.
 	   The driver includes an interpreter for escape codes starting with
 	   '\e[L' which are specific to the LCD, and a few ANSI codes. The
@@ -255,7 +255,7 @@ config PANEL_LCD_HEIGHT
 	int "Number of lines on the LCD (1-2)"
 	range 1 2
 	default 2
-	---help---
+	help
 	  This is the number of visible character lines on the LCD in custom profile.
 	  It can either be 1 or 2.

@@ -264,7 +264,7 @@ config PANEL_LCD_WIDTH
 	int "Number of characters per line on the LCD (1-40)"
 	range 1 40
 	default 40
-	---help---
+	help
 	  This is the number of characters per line on the LCD in custom profile.
 	  Common values are 16,20,24,40.

@@ -273,7 +273,7 @@ config PANEL_LCD_BWIDTH
 	int "Internal LCD line width (1-40, 40 by default)"
 	range 1 40
 	default 40
-	---help---
+	help
 	  Most LCDs use a standard controller which supports hardware lines of 40
 	  characters, although sometimes only 16, 20 or 24 of them are really wired
 	  to the terminal. This results in some non-visible but addressable characters,
@@ -289,7 +289,7 @@ config PANEL_LCD_HWIDTH
 	int "Hardware LCD line width (1-64, 64 by default)"
 	range 1 64
 	default 64
-	---help---
+	help
 	  Most LCDs use a single address bit to differentiate line 0 and line 1. Since
 	  some of them need to be able to address 40 chars with the lower bits, they
 	  often use the immediately superior power of 2, which is 64, to address the
@@ -303,7 +303,7 @@ config PANEL_LCD_CHARSET
 	int "LCD character set (0=normal, 1=KS0074)"
 	range 0 1
 	default 0
-	---help---
+	help
 	  Some controllers such as the KS0074 use a somewhat strange character set
 	  where many symbols are at unusual places. The driver knows how to map
 	  'standard' ASCII characters to the character sets used by these controllers.
@@ -319,7 +319,7 @@ config PANEL_LCD_PROTO
 	int "LCD communication mode (0=parallel 8 bits, 1=serial)"
 	range 0 1
 	default 0
-	---help---
+	help
 	  This driver now supports any serial or parallel LCD wired to a parallel
 	  port. But before assigning signals, the driver needs to know if it will
 	  be driving a serial LCD or a parallel one. Serial LCDs only use 2 wires
@@ -332,7 +332,7 @@ config PANEL_LCD_PIN_E
 	int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) "
 	range -17 17
 	default 14
-	---help---
+	help
 	  This describes the number of the parallel port pin to which the LCD 'E'
 	  signal has been connected. It can be :

@@ -347,7 +347,7 @@ config PANEL_LCD_PIN_RS
 	int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) "
 	range -17 17
 	default 17
-	---help---
+	help
 	  This describes the number of the parallel port pin to which the LCD 'RS'
 	  signal has been connected. It can be :

@@ -362,7 +362,7 @@ config PANEL_LCD_PIN_RW
 	int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) "
 	range -17 17
 	default 16
-	---help---
+	help
 	  This describes the number of the parallel port pin to which the LCD 'RW'
 	  signal has been connected. It can be :

@@ -377,7 +377,7 @@ config PANEL_LCD_PIN_SCL
 	int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) "
 	range -17 17
 	default 1
-	---help---
+	help
 	  This describes the number of the parallel port pin to which the serial
 	  LCD 'SCL' signal has been connected. It can be :

@@ -392,7 +392,7 @@ config PANEL_LCD_PIN_SDA
 	int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) "
 	range -17 17
 	default 2
-	---help---
+	help
 	  This describes the number of the parallel port pin to which the serial
 	  LCD 'SDA' signal has been connected. It can be :

@@ -407,7 +407,7 @@ config PANEL_LCD_PIN_BL
 	int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) "
 	range -17 17
 	default 0
-	---help---
+	help
 	  This describes the number of the parallel port pin to which the LCD 'BL' signal
 	  has been connected. It can be :

@@ -423,7 +423,7 @@ config PANEL_CHANGE_MESSAGE
 	bool "Change LCD initialization message ?"
 	depends on CHARLCD
 	default "n"
-	---help---
+	help
 	  This allows you to replace the boot message indicating the kernel version
 	  and the driver version with a custom message. This is useful on appliances
 	  where a simple 'Starting system' message can be enough to stop a customer
@@ -436,7 +436,7 @@ config PANEL_BOOT_MESSAGE
 	depends on PANEL_CHANGE_MESSAGE="y"
 	string "New initialization message"
 	default ""
-	---help---
+	help
 	  This allows you to replace the boot message indicating the kernel version
 	  and the driver version with a custom message. This is useful on appliances
 	  where a simple 'Starting system' message can be enough to stop a customer
@@ -448,7 +448,7 @@ config PANEL_BOOT_MESSAGE
 choice
 	prompt "Backlight initial state"
 	default CHARLCD_BL_FLASH
-	---help---
+	help
 	  Select the initial backlight state on boot or module load.

 	  Previously, there was no option for this: the backlight flashed

--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -7,7 +7,7 @@ menuconfig BLK_DEV
 	bool "Block devices"
 	depends on BLOCK
 	default y
-	---help---
+	help
 	  Say Y here to get to see options for various different block device
 	  drivers. This option alone does not add any kernel code.

@@ -27,7 +27,7 @@ config BLK_DEV_NULL_BLK_FAULT_INJECTION
 config BLK_DEV_FD
 	tristate "Normal floppy disk support"
 	depends on ARCH_MAY_HAVE_PC_FDC
-	---help---
+	help
 	  If you want to use the floppy disk drive(s) of your PC under Linux,
 	  say Y. Information about this driver, especially important for IBM
 	  Thinkpad users, is contained in
@@ -91,7 +91,7 @@ config GDROM
 config PARIDE
 	tristate "Parallel port IDE device support"
 	depends on PARPORT_PC
-	---help---
+	help
 	  There are many external CD-ROM and disk devices that connect through
 	  your computer's parallel port. Most of them are actually IDE devices
 	  using a parallel port IDE adapter. This option enables the PARIDE
@@ -124,7 +124,7 @@ source "drivers/block/zram/Kconfig"
 config BLK_DEV_UMEM
 	tristate "Micro Memory MM5415 Battery Backed RAM support"
 	depends on PCI
-	---help---
+	help
 	  Saying Y here will include support for the MM5415 family of
 	  battery backed (Non-volatile) RAM cards.
 	  <http://www.umem.com/>
@@ -141,7 +141,7 @@ config BLK_DEV_UMEM
 config BLK_DEV_UBD
 	bool "Virtual block device"
 	depends on UML
-	---help---
+	help
          The User-Mode Linux port includes a driver called UBD which will let
          you access arbitrary files on the host computer as block devices.
          Unless you know that you do not need such virtual block devices say
@@ -150,7 +150,7 @@ config BLK_DEV_UBD
 config BLK_DEV_UBD_SYNC
 	bool "Always do synchronous disk IO for UBD"
 	depends on BLK_DEV_UBD
-	---help---
+	help
 	  Writes to the virtual block device are not immediately written to the
 	  host's disk; this may cause problems if, for example, the User-Mode
 	  Linux 'Virtual Machine' uses a journalling filesystem and the host
@@ -173,7 +173,7 @@ config BLK_DEV_COW_COMMON

 config BLK_DEV_LOOP
 	tristate "Loopback device support"
-	---help---
+	help
 	  Saying Y here will allow you to use a regular file as a block
 	  device; you can then create a file system on that block device and
 	  mount it just as you would mount other block devices such as hard
@@ -234,7 +234,7 @@ config BLK_DEV_CRYPTOLOOP
 	select CRYPTO
 	select CRYPTO_CBC
 	depends on BLK_DEV_LOOP
-	---help---
+	help
 	  Say Y here if you want to be able to use the ciphers that are 
 	  provided by the CryptoAPI as loop transformation. This might be
 	  used as hard disk encryption.
@@ -249,7 +249,7 @@ source "drivers/block/drbd/Kconfig"
 config BLK_DEV_NBD
 	tristate "Network block device support"
 	depends on NET
-	---help---
+	help
 	  Saying Y here will allow your computer to be a client for network
 	  block devices, i.e. it will be able to use block devices exported by
 	  servers (mount file systems on them etc.). Communication between
@@ -277,7 +277,7 @@ config BLK_DEV_SKD
 	tristate "STEC S1120 Block Driver"
 	depends on PCI
 	depends on 64BIT
-	---help---
+	help
 	Saying Y or M here will enable support for the
 	STEC, Inc. S1120 PCIe SSD.

@@ -286,7 +286,7 @@ config BLK_DEV_SKD
 config BLK_DEV_SX8
 	tristate "Promise SATA SX8 support"
 	depends on PCI
-	---help---
+	help
 	  Saying Y or M here will enable support for the 
 	  Promise SATA SX8 controllers.

@@ -294,7 +294,7 @@ config BLK_DEV_SX8

 config BLK_DEV_RAM
 	tristate "RAM block device support"
-	---help---
+	help
 	  Saying Y here will allow you to use a portion of your RAM memory as
 	  a block device, so that you can make file systems on it, read and
 	  write to it and do all the other things that you can do with normal
@@ -428,7 +428,7 @@ config XEN_BLKDEV_BACKEND
 config VIRTIO_BLK
 	tristate "Virtio block driver"
 	depends on VIRTIO
-	---help---
+	help
 	  This is the virtual block driver for virtio.  It can be used with
          QEMU based VMMs (like KVM or Xen).  Say Y or M.


--- a/drivers/block/paride/Kconfig
+++ b/drivers/block/paride/Kconfig
@@ -28,7 +28,7 @@ config PARIDE_PCD
 	depends on PARIDE
 	select CDROM
 	select BLK_SCSI_REQUEST # only for the generic cdrom code
-	---help---
+	help
 	  This option enables the high-level driver for ATAPI CD-ROM devices
 	  connected through a parallel port. If you chose to build PARIDE
 	  support into your kernel, you may answer Y here to build in the
@@ -71,7 +71,7 @@ config PARIDE_PT
 config PARIDE_PG
 	tristate "Parallel port generic ATAPI devices"
 	depends on PARIDE
-	---help---
+	help
 	  This option enables a special high-level driver for generic ATAPI
 	  devices connected through a parallel port. The driver allows user
 	  programs, such as cdrtools, to send ATAPI commands directly to a
@@ -111,7 +111,7 @@ config PARIDE_ATEN
 config PARIDE_BPCK
 	tristate "MicroSolutions backpack (Series 5) protocol"
 	depends on PARIDE
-	---help---
+	help
 	  This option enables support for the Micro Solutions BACKPACK
 	  parallel port Series 5 IDE protocol.  (Most BACKPACK drives made
 	  before 1999 were Series 5) Series 5 drives will NOT always have the
@@ -129,7 +129,7 @@ config PARIDE_BPCK
 config PARIDE_BPCK6
 	tristate "MicroSolutions backpack (Series 6) protocol"
 	depends on PARIDE && !64BIT
-	---help---
+	help
 	  This option enables support for the Micro Solutions BACKPACK
 	  parallel port Series 6 IDE protocol.  (Most BACKPACK drives made
 	  after 1999 were Series 6) Series 6 drives will have the Series noted

--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -11,7 +11,7 @@ config TTY_PRINTK
 	tristate "TTY driver to output user messages via printk"
 	depends on EXPERT && TTY
 	default n
-	---help---
+	help
 	  If you say Y here, the support for writing user messages (i.e.
 	  console messages) via printk is available.

@@ -33,7 +33,7 @@ config TTY_PRINTK_LEVEL
 config PRINTER
 	tristate "Parallel printer support"
 	depends on PARPORT
-	---help---
+	help
 	  If you intend to attach a printer to the parallel port of your Linux
 	  box (as opposed to using a serial printer; if the connector at the
 	  printer has 9 or 25 holes ["female"], then it's serial), say Y.
@@ -59,7 +59,7 @@ config PRINTER
 config LP_CONSOLE
 	bool "Support for console on line printer"
 	depends on PRINTER
-	---help---
+	help
 	  If you want kernel messages to be printed out as they occur, you
 	  can have a console on the printer. This option adds support for
 	  doing that; to actually get it to happen you need to pass the
@@ -76,7 +76,7 @@ config LP_CONSOLE
 config PPDEV
 	tristate "Support for user-space parallel port device drivers"
 	depends on PARPORT
-	---help---
+	help
 	  Saying Y to this adds support for /dev/parport device nodes.  This
 	  is needed for programs that want portable access to the parallel
 	  port, for instance deviceid (which displays Plug-and-Play device
@@ -146,7 +146,7 @@ config DS1620
 config NWBUTTON
 	tristate "NetWinder Button"
 	depends on ARCH_NETWINDER
-	---help---
+	help
 	  If you say Y here and create a character device node /dev/nwbutton
 	  with major and minor numbers 10 and 158 ("man mknod"), then every
 	  time the orange button is pressed a number of times, the number of
@@ -182,7 +182,7 @@ config NWBUTTON_REBOOT
 config NWFLASH
 	tristate "NetWinder flash support"
 	depends on ARCH_NETWINDER
-	---help---
+	help
 	  If you say Y here and create a character device /dev/flash with
 	  major 10 and minor 160 you can manipulate the flash ROM containing
 	  the NetWinder firmware. Be careful as accidentally overwriting the
@@ -220,7 +220,7 @@ config XILINX_HWICAP
 config R3964
 	tristate "Siemens R3964 line discipline"
 	depends on TTY && BROKEN
-	---help---
+	help
 	  This driver allows synchronous communication with devices using the
 	  Siemens R3964 packet protocol. Unless you are dealing with special
 	  hardware like PLCs, you are unlikely to need this.
@@ -233,7 +233,7 @@ config R3964
 config APPLICOM
 	tristate "Applicom intelligent fieldbus card support"
 	depends on PCI
-	---help---
+	help
 	  This driver provides the kernel-side support for the intelligent
 	  fieldbus cards made by Applicom International. More information
 	  about these cards can be found on the WWW at the address
@@ -248,7 +248,7 @@ config APPLICOM
 config SONYPI
 	tristate "Sony Vaio Programmable I/O Control Device support"
 	depends on X86_32 && PCI && INPUT
-	---help---
+	help
 	  This driver enables access to the Sony Programmable I/O Control
 	  Device which can be found in many (all ?) Sony Vaio laptops.

@@ -269,7 +269,7 @@ config MWAVE
 	tristate "ACP Modem (Mwave) support"
 	depends on X86 && TTY
 	select SERIAL_8250
-	---help---
+	help
 	  The ACP modem (Mwave) for Linux is a WinModem. It is composed of a
 	  kernel driver and a user level application. Together these components
 	  support direct attachment to public switched telephone networks (PSTNs)
@@ -347,7 +347,7 @@ config NVRAM
 	tristate "/dev/nvram support"
 	depends on X86 || HAVE_ARCH_NVRAM_OPS
 	default M68K || PPC
-	---help---
+	help
 	  If you say Y here and create a character special file /dev/nvram
 	  with major number 10 and minor number 144 using mknod ("man mknod"),
 	  you get read and write access to the non-volatile memory.

--- a/drivers/char/agp/Kconfig
+++ b/drivers/char/agp/Kconfig
@@ -3,7 +3,7 @@ menuconfig AGP
 	tristate "/dev/agpgart (AGP Support)"
 	depends on ALPHA || IA64 || PARISC || PPC || X86
 	depends on PCI
-	---help---
+	help
 	  AGP (Accelerated Graphics Port) is a bus system mainly used to
 	  connect graphics cards to the rest of the system.

@@ -30,7 +30,7 @@ menuconfig AGP
 config AGP_ALI
 	tristate "ALI chipset support"
 	depends on AGP && X86_32
-	---help---
+	help
 	  This option gives you AGP support for the GLX component of
 	  X on the following ALi chipsets.  The supported chipsets
 	  include M1541, M1621, M1631, M1632, M1641,M1647,and M1651.
@@ -45,7 +45,7 @@ config AGP_ALI
 config AGP_ATI
 	tristate "ATI chipset support"
 	depends on AGP && X86_32
-	---help---
+	help
 	  This option gives you AGP support for the GLX component of
 	  X on the ATI RadeonIGP family of chipsets.


--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -6,7 +6,7 @@
 menuconfig HW_RANDOM
 	tristate "Hardware Random Number Generator Core support"
 	default m
-	---help---
+	help
 	  Hardware Random Number Generator Core infrastructure.

 	  To compile this driver as a module, choose M here: the
@@ -24,7 +24,7 @@ if HW_RANDOM
 config HW_RANDOM_TIMERIOMEM
 	tristate "Timer IOMEM HW Random Number Generator support"
 	depends on HAS_IOMEM
-	---help---
+	help
 	  This driver provides kernel-side support for a generic Random
 	  Number Generator used by reading a 'dumb' iomem address that
 	  is to be read no faster than, for example, once a second;
@@ -39,7 +39,7 @@ config HW_RANDOM_INTEL
 	tristate "Intel HW Random Number Generator support"
 	depends on (X86 || IA64) && PCI
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Intel i8xx-based motherboards.

@@ -52,7 +52,7 @@ config HW_RANDOM_AMD
 	tristate "AMD HW Random Number Generator support"
 	depends on (X86 || PPC_MAPLE) && PCI
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on AMD 76x-based motherboards.

@@ -65,7 +65,7 @@ config HW_RANDOM_ATMEL
 	tristate "Atmel Random Number Generator support"
 	depends on ARCH_AT91 && HAVE_CLK && OF
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Atmel AT91 devices.

@@ -79,7 +79,7 @@ config HW_RANDOM_BCM2835
 	depends on ARCH_BCM2835 || ARCH_BCM_NSP || ARCH_BCM_5301X || \
 		   ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on the Broadcom BCM2835 and BCM63xx SoCs.

@@ -92,7 +92,7 @@ config HW_RANDOM_IPROC_RNG200
 	tristate "Broadcom iProc/STB RNG200 support"
 	depends on ARCH_BCM_IPROC || ARCH_BCM2835 || ARCH_BRCMSTB
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the RNG200
 	  hardware found on the Broadcom iProc and STB SoCs.

@@ -105,7 +105,7 @@ config HW_RANDOM_GEODE
 	tristate "AMD Geode HW Random Number Generator support"
 	depends on X86_32 && PCI
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on the AMD Geode LX.

@@ -118,7 +118,7 @@ config HW_RANDOM_N2RNG
 	tristate "Niagara2 Random Number Generator support"
 	depends on SPARC64
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Niagara2 cpus.

@@ -131,7 +131,7 @@ config HW_RANDOM_VIA
 	tristate "VIA HW Random Number Generator support"
 	depends on X86
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on VIA based motherboards.

@@ -144,7 +144,7 @@ config HW_RANDOM_IXP4XX
 	tristate "Intel IXP4xx NPU HW Pseudo-Random Number Generator support"
 	depends on ARCH_IXP4XX
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Pseudo-Random
 	  Number Generator hardware found on the Intel IXP45x/46x NPU.

@@ -157,7 +157,7 @@ config HW_RANDOM_OMAP
 	tristate "OMAP Random Number Generator support"
 	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS || ARCH_MVEBU
 	default HW_RANDOM
- 	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on OMAP16xx, OMAP2/3/4/5, AM33xx/AM43xx
 	  multimedia processors, and Marvell Armada 7k/8k SoCs.
@@ -171,7 +171,7 @@ config HW_RANDOM_OMAP3_ROM
 	tristate "OMAP3 ROM Random Number Generator support"
 	depends on ARCH_OMAP3
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on OMAP34xx processors.

@@ -184,7 +184,7 @@ config HW_RANDOM_OCTEON
 	tristate "Octeon Random Number Generator support"
 	depends on CAVIUM_OCTEON_SOC
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Octeon processors.

@@ -197,7 +197,7 @@ config HW_RANDOM_PASEMI
 	tristate "PA Semi HW Random Number Generator support"
 	depends on PPC_PASEMI
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on PA Semi PWRficient SoCs.

@@ -209,7 +209,7 @@ config HW_RANDOM_PASEMI
 config HW_RANDOM_VIRTIO
 	tristate "VirtIO Random Number Generator support"
 	depends on VIRTIO
-	---help---
+	help
 	  This driver provides kernel-side support for the virtual Random Number
 	  Generator hardware.

@@ -220,7 +220,7 @@ config HW_RANDOM_TX4939
 	tristate "TX4939 Random Number Generator support"
 	depends on SOC_TX4939
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on TX4939 SoC.

@@ -233,7 +233,7 @@ config HW_RANDOM_MXC_RNGA
 	tristate "Freescale i.MX RNGA Random Number Generator"
 	depends on SOC_IMX31
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Freescale i.MX processors.

@@ -247,7 +247,7 @@ config HW_RANDOM_IMX_RNGC
 	depends on HAS_IOMEM && HAVE_CLK
 	depends on SOC_IMX25 || COMPILE_TEST
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator Version C hardware found on some Freescale i.MX
 	  processors. Version B is also supported by this driver.
@@ -261,7 +261,7 @@ config HW_RANDOM_NOMADIK
 	tristate "ST-Ericsson Nomadik Random Number Generator support"
 	depends on ARCH_NOMADIK
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on ST-Ericsson SoCs (8815 and 8500).

@@ -274,7 +274,7 @@ config HW_RANDOM_PSERIES
 	tristate "pSeries HW Random Number Generator support"
 	depends on PPC64 && IBMVIO
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on POWER7+ machines and above

@@ -287,7 +287,7 @@ config HW_RANDOM_POWERNV
 	tristate "PowerNV Random Number Generator support"
 	depends on PPC_POWERNV
 	default HW_RANDOM
-	---help---
+	help
 	  This is the driver for Random Number Generator hardware found
 	  in POWER7+ and above machines for PowerNV platform.

@@ -300,7 +300,7 @@ config HW_RANDOM_HISI
 	tristate "Hisilicon Random Number Generator support"
 	depends on HW_RANDOM && ARCH_HISI
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Hisilicon Hip04 and Hip05 SoC.

@@ -325,7 +325,7 @@ config HW_RANDOM_HISI_V2
 config HW_RANDOM_ST
 	tristate "ST Microelectronics HW Random Number Generator support"
 	depends on HW_RANDOM && ARCH_STI
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on STi series of SoCs.

@@ -336,7 +336,7 @@ config HW_RANDOM_XGENE
 	tristate "APM X-Gene True Random Number Generator (TRNG) support"
 	depends on HW_RANDOM && ARCH_XGENE
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on APM X-Gene SoC.

@@ -363,7 +363,7 @@ config HW_RANDOM_PIC32
 	tristate "Microchip PIC32 Random Number Generator support"
 	depends on HW_RANDOM && MACH_PIC32
 	default y
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on a PIC32.

@@ -377,7 +377,7 @@ config HW_RANDOM_MESON
 	depends on HW_RANDOM
 	depends on ARCH_MESON || COMPILE_TEST
 	default y
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Amlogic Meson SoCs.

@@ -390,7 +390,7 @@ config HW_RANDOM_CAVIUM
 	tristate "Cavium ThunderX Random Number Generator support"
 	depends on HW_RANDOM && PCI && (ARM64 || (COMPILE_TEST && 64BIT))
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Cavium SoCs.

@@ -404,7 +404,7 @@ config HW_RANDOM_MTK
 	depends on HW_RANDOM
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 	default y
-	---help---
+	help
 	  This driver provides kernel-side support for the Random Number
 	  Generator hardware found on Mediatek SoCs.

@@ -417,7 +417,7 @@ config HW_RANDOM_S390
 	tristate "S390 True Random Number Generator support"
 	depends on S390
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides kernel-side support for the True
 	  Random Number Generator available as CPACF extension
 	  on modern s390 hardware platforms.
@@ -431,7 +431,7 @@ config HW_RANDOM_EXYNOS
 	tristate "Samsung Exynos True Random Number Generator support"
 	depends on ARCH_EXYNOS || COMPILE_TEST
 	default HW_RANDOM
-	---help---
+	help
 	  This driver provides support for the True Random Number
 	  Generator available in Exynos SoCs.


--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -9,7 +9,7 @@ menuconfig TCG_TPM
 	imply SECURITYFS
 	select CRYPTO
 	select CRYPTO_HASH_INFO
-	---help---
+	help
 	  If you have a TPM security chip in your system, which
 	  implements the Trusted Computing Group's specification,
 	  say Yes and it will be accessible from within Linux.  For
@@ -31,7 +31,7 @@ config HW_RANDOM_TPM
 	bool "TPM HW Random Number Generator support"
 	depends on TCG_TPM && HW_RANDOM && !(TCG_TPM=y && HW_RANDOM=m)
 	default y
-	---help---
+	help
 	  This setting exposes the TPM's Random Number Generator as a hwrng
 	  device. This allows the kernel to collect randomness from the TPM at
 	  boot, and provides the TPM randomines in /dev/hwrng.
@@ -40,7 +40,7 @@ config HW_RANDOM_TPM

 config TCG_TIS_CORE
 	tristate
-	---help---
+	help
 	TCG TIS TPM core driver. It implements the TPM TCG TIS logic and hooks
 	into the TPM kernel APIs. Physical layers will register against it.

@@ -48,7 +48,7 @@ config TCG_TIS
 	tristate "TPM Interface Specification 1.2 Interface / TPM 2.0 FIFO Interface"
 	depends on X86 || OF
 	select TCG_TIS_CORE
-	---help---
+	help
 	  If you have a TPM security chip that is compliant with the
 	  TCG TIS 1.2 TPM specification (TPM1.2) or the TCG PTP FIFO
 	  specification (TPM2.0) say Yes and it will be accessible from
@@ -59,7 +59,7 @@ config TCG_TIS_SPI
 	tristate "TPM Interface Specification 1.3 Interface / TPM 2.0 FIFO Interface - (SPI)"
 	depends on SPI
 	select TCG_TIS_CORE
-	---help---
+	help
 	  If you have a TPM security chip which is connected to a regular,
 	  non-tcg SPI master (i.e. most embedded platforms) that is compliant with the
 	  TCG TIS 1.3 TPM specification (TPM1.2) or the TCG PTP FIFO
@@ -77,7 +77,7 @@ config TCG_TIS_SPI_CR50
 config TCG_TIS_I2C_ATMEL
 	tristate "TPM Interface Specification 1.2 Interface (I2C - Atmel)"
 	depends on I2C
-	---help---
+	help
 	  If you have an Atmel I2C TPM security chip say Yes and it will be
 	  accessible from within Linux.
 	  To compile this driver as a module, choose M here; the module will
@@ -86,7 +86,7 @@ config TCG_TIS_I2C_ATMEL
 config TCG_TIS_I2C_INFINEON
 	tristate "TPM Interface Specification 1.2 Interface (I2C - Infineon)"
 	depends on I2C
-	---help---
+	help
 	  If you have a TPM security chip that is compliant with the
 	  TCG TIS 1.2 TPM specification and Infineon's I2C Protocol Stack
 	  Specification 0.20 say Yes and it will be accessible from within
@@ -97,7 +97,7 @@ config TCG_TIS_I2C_INFINEON
 config TCG_TIS_I2C_NUVOTON
 	tristate "TPM Interface Specification 1.2 Interface (I2C - Nuvoton)"
 	depends on I2C
-	---help---
+	help
 	  If you have a TPM security chip with an I2C interface from
 	  Nuvoton Technology Corp. say Yes and it will be accessible
 	  from within Linux.
@@ -107,7 +107,7 @@ config TCG_TIS_I2C_NUVOTON
 config TCG_NSC
 	tristate "National Semiconductor TPM Interface"
 	depends on X86
-	---help---
+	help
 	  If you have a TPM security chip from National Semiconductor 
 	  say Yes and it will be accessible from within Linux.  To 
 	  compile this driver as a module, choose M here; the module 
@@ -116,7 +116,7 @@ config TCG_NSC
 config TCG_ATMEL
 	tristate "Atmel TPM Interface"
 	depends on PPC64 || HAS_IOPORT_MAP
-	---help---
+	help
 	  If you have a TPM security chip from Atmel say Yes and it 
 	  will be accessible from within Linux.  To compile this driver 
 	  as a module, choose M here; the module will be called tpm_atmel.
@@ -124,7 +124,7 @@ config TCG_ATMEL
 config TCG_INFINEON
 	tristate "Infineon Technologies TPM Interface"
 	depends on PNP
-	---help---
+	help
 	  If you have a TPM security chip from Infineon Technologies
 	  (either SLD 9630 TT 1.1 or SLB 9635 TT 1.2) say Yes and it
 	  will be accessible from within Linux.
@@ -136,7 +136,7 @@ config TCG_INFINEON
 config TCG_IBMVTPM
 	tristate "IBM VTPM Interface"
 	depends on PPC_PSERIES
-	---help---
+	help
 	  If you have IBM virtual TPM (VTPM) support say Yes and it
 	  will be accessible from within Linux.  To compile this driver
 	  as a module, choose M here; the module will be called tpm_ibmvtpm.
@@ -145,7 +145,7 @@ config TCG_XEN
 	tristate "XEN TPM Interface"
 	depends on TCG_TPM && XEN
 	select XEN_XENBUS_FRONTEND
-	---help---
+	help
 	  If you want to make TPM support available to a Xen user domain,
 	  say Yes and it will be accessible from within Linux. See
 	  the manpages for xl, xl.conf, and docs/misc/vtpm.txt in
@@ -156,7 +156,7 @@ config TCG_XEN
 config TCG_CRB
 	tristate "TPM 2.0 CRB Interface"
 	depends on ACPI
-	---help---
+	help
 	  If you have a TPM security chip that is compliant with the
 	  TCG CRB 2.0 TPM specification say Yes and it will be accessible
 	  from within Linux.  To compile this driver as a module, choose
@@ -165,7 +165,7 @@ config TCG_CRB
 config TCG_VTPM_PROXY
 	tristate "VTPM Proxy Interface"
 	depends on TCG_TPM
-	---help---
+	help
 	  This driver proxies for an emulated TPM (vTPM) running in userspace.
 	  A device /dev/vtpmx is provided that creates a device pair
 	  /dev/vtpmX and a server-side file descriptor on which the vTPM

--- a/drivers/char/tpm/st33zp24/Kconfig
+++ b/drivers/char/tpm/st33zp24/Kconfig
 # SPDX-License-Identifier: GPL-2.0-only
 config TCG_TIS_ST33ZP24
 	tristate
-	---help---
+	help
 	  STMicroelectronics ST33ZP24 core driver. It implements the core
 	  TPM1.2 logic and hooks into the TPM kernel APIs. Physical layers will
 	  register against it.
@@ -13,7 +13,7 @@ config TCG_TIS_ST33ZP24_I2C
 	tristate "STMicroelectronics TPM Interface Specification 1.2 Interface (I2C)"
 	depends on I2C
 	select TCG_TIS_ST33ZP24
-	---help---
+	help
 	  This module adds support for the STMicroelectronics TPM security chip
 	  ST33ZP24 with i2c interface.
 	  To compile this driver as a module, choose M here; the module will be
@@ -23,7 +23,7 @@ config TCG_TIS_ST33ZP24_SPI
 	tristate "STMicroelectronics TPM Interface Specification 1.2 Interface (SPI)"
 	depends on SPI
 	select TCG_TIS_ST33ZP24
-	---help---
+	help
 	  This module adds support for the STMicroelectronics TPM security chip
 	  ST33ZP24 with spi interface.
 	  To compile this driver as a module, choose M here; the module will be

--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -29,7 +29,7 @@ menuconfig COMMON_CLK
 	select CLKDEV_LOOKUP
 	select SRCU
 	select RATIONAL
-	---help---
+	help
 	  The common clock framework is a single definition of struct
 	  clk, useful across many platforms, as well as an
 	  implementation of the clock API in include/linux/clk.h.
@@ -41,7 +41,7 @@ if COMMON_CLK
 config COMMON_CLK_WM831X
 	tristate "Clock driver for WM831x/2x PMICs"
 	depends on MFD_WM831X
-	---help---
+	help
 	  Supports the clocking subsystem of the WM831x/2x series of
 	  PMICs from Wolfson Microelectronics.

@@ -50,14 +50,14 @@ source "drivers/clk/versatile/Kconfig"
 config CLK_HSDK
 	bool "PLL Driver for HSDK platform"
 	depends on OF || COMPILE_TEST
-	---help---
+	help
 	  This driver supports the HSDK core, system, ddr, tunnel and hdmi PLLs
 	  control.

 config COMMON_CLK_MAX77686
 	tristate "Clock driver for Maxim 77620/77686/77802 MFD"
 	depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
-	---help---
+	help
 	  This driver supports Maxim 77620/77686/77802 crystal oscillator
 	  clock.

@@ -70,7 +70,7 @@ config COMMON_CLK_MAX9485
 config COMMON_CLK_RK808
 	tristate "Clock driver for RK805/RK808/RK809/RK817/RK818"
 	depends on MFD_RK808
-	---help---
+	help
 	  This driver supports RK805, RK809 and RK817, RK808 and RK818 crystal oscillator clock.
 	  These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each.
 	  Clkout1 is always on, Clkout2 can off by control register.
@@ -80,7 +80,7 @@ config COMMON_CLK_HI655X
 	depends on (MFD_HI655X_PMIC || COMPILE_TEST)
 	depends on REGMAP
 	default MFD_HI655X_PMIC
-	---help---
+	help
 	  This driver supports the hi655x PMIC clock. This
 	  multi-function device has one fixed-rate oscillator, clocked
 	  at 32KHz.
@@ -88,7 +88,7 @@ config COMMON_CLK_HI655X
 config COMMON_CLK_SCMI
 	tristate "Clock driver controlled via SCMI interface"
 	depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
-	  ---help---
+	help
 	  This driver provides support for clocks that are controlled
 	  by firmware that implements the SCMI interface.

@@ -98,7 +98,7 @@ config COMMON_CLK_SCMI
 config COMMON_CLK_SCPI
 	tristate "Clock driver controlled via SCPI interface"
 	depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
-	  ---help---
+	help
 	  This driver provides support for clocks that are controlled
 	  by firmware that implements the SCPI interface.

@@ -121,7 +121,7 @@ config COMMON_CLK_SI5351
 	depends on I2C
 	select REGMAP_I2C
 	select RATIONAL
-	---help---
+	help
 	  This driver supports Silicon Labs 5351A/B/C programmable clock
 	  generators.

@@ -163,7 +163,7 @@ config COMMON_CLK_CDCE706
 	depends on I2C
 	select REGMAP_I2C
 	select RATIONAL
-	---help---
+	help
 	  This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.

 config COMMON_CLK_CDCE925
@@ -206,7 +206,7 @@ config COMMON_CLK_GEMINI
 	depends on ARCH_GEMINI || COMPILE_TEST
 	select MFD_SYSCON
 	select RESET_CONTROLLER
-	---help---
+	help
 	  This driver supports the SoC clocks on the Cortina Systems Gemini
 	  platform, also known as SL3516 or CS3516.

@@ -216,7 +216,7 @@ config COMMON_CLK_ASPEED
 	default ARCH_ASPEED
 	select MFD_SYSCON
 	select RESET_CONTROLLER
-	---help---
+	help
 	  This driver supports the SoC clocks on the Aspeed BMC platforms.

 	  The G4 and G5 series, including the ast2400 and ast2500, are supported
@@ -225,7 +225,7 @@ config COMMON_CLK_ASPEED
 config COMMON_CLK_S2MPS11
 	tristate "Clock driver for S2MPS1X/S5M8767 MFD"
 	depends on MFD_SEC_CORE || COMPILE_TEST
-	---help---
+	help
 	  This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
 	  clock. These multi-function devices have two (S2MPS14) or three
 	  (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
@@ -233,7 +233,7 @@ config COMMON_CLK_S2MPS11
 config CLK_TWL6040
 	tristate "External McPDM functional clock from twl6040"
 	depends on TWL6040_CORE
-	---help---
+	help
 	  Enable the external functional clock support on OMAP4+ platforms for
 	  McPDM. McPDM module is using the external bit clock on the McPDM bus
 	  as functional clock.
@@ -248,7 +248,7 @@ config COMMON_CLK_AXI_CLKGEN
 config CLK_QORIQ
 	bool "Clock driver for Freescale QorIQ platforms"
 	depends on (PPC_E500MC || ARM || ARM64 || COMPILE_TEST) && OF
-	---help---
+	help
 	  This adds the clock driver support for Freescale QorIQ platforms
 	  using common clock framework.

@@ -266,7 +266,7 @@ config COMMON_CLK_XGENE
 	bool "Clock driver for APM XGene SoC"
 	default ARCH_XGENE
 	depends on ARM64 || COMPILE_TEST
-	---help---
+	help
 	  Support for the APM X-Gene SoC reference, PLL, and device clocks.

 config COMMON_CLK_LOCHNAGAR
@@ -280,26 +280,26 @@ config COMMON_CLK_NXP
 	def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX)
 	select REGMAP_MMIO if ARCH_LPC32XX
 	select MFD_SYSCON if ARCH_LPC18XX
-	---help---
+	help
 	  Support for clock providers on NXP platforms.

 config COMMON_CLK_PALMAS
 	tristate "Clock driver for TI Palmas devices"
 	depends on MFD_PALMAS
-	---help---
+	help
 	  This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO
 	  using common clock framework.

 config COMMON_CLK_PWM
 	tristate "Clock driver for PWMs used as clock outputs"
 	depends on PWM
-	---help---
+	help
 	  Adapter driver so that any PWM output can be (mis)used as clock signal
 	  at 50% duty cycle.

 config COMMON_CLK_PXA
 	def_bool COMMON_CLK && ARCH_PXA
-	---help---
+	help
 	  Support for the Marvell PXA SoC.

 config COMMON_CLK_PIC32
@@ -309,7 +309,7 @@ config COMMON_CLK_OXNAS
 	bool "Clock driver for the OXNAS SoC Family"
 	depends on ARCH_OXNAS || COMPILE_TEST
 	select MFD_SYSCON
-	---help---
+	help
 	  Support for the OXNAS SoC Family clocks.

 config COMMON_CLK_VC5

--- a/drivers/clk/imgtec/Kconfig
+++ b/drivers/clk/imgtec/Kconfig
@@ -3,7 +3,7 @@ config COMMON_CLK_BOSTON
 	bool "Clock driver for MIPS Boston boards"
 	depends on MIPS || COMPILE_TEST
 	select MFD_SYSCON
-	---help---
+	help
 	  Enable this to support the system & CPU clocks on the MIPS Boston
 	  development board from Imagination Technologies. These are simple
 	  fixed rate clocks whose rate is determined by reading a platform

--- a/drivers/clk/keystone/Kconfig
+++ b/drivers/clk/keystone/Kconfig
@@ -2,7 +2,7 @@
 config COMMON_CLK_KEYSTONE
 	tristate "Clock drivers for Keystone based SOCs"
 	depends on (ARCH_KEYSTONE || COMPILE_TEST) && OF
-	---help---
+	help
 	  Supports clock drivers for Keystone based SOCs. These SOCs have local
 	  a power sleep control module that gate the clock to the IPs and PLLs.

@@ -11,7 +11,7 @@ config TI_SCI_CLK
 	depends on (ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST) && OF
 	depends on TI_SCI_PROTOCOL
 	default ARCH_KEYSTONE
-	---help---
+	help
 	  This adds the clock driver support over TI System Control Interface.
 	  If you wish to use clock resources from the PMMC firmware, say Y.
 	  Otherwise, say N.

--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -8,7 +8,7 @@ menu "Clock driver for MediaTek SoC"
 config COMMON_CLK_MEDIATEK
 	bool
 	select RESET_CONTROLLER
-	---help---
+	help
 	  MediaTek SoCs' clock support.

 config COMMON_CLK_MT2701
@@ -16,55 +16,55 @@ config COMMON_CLK_MT2701
 	depends on (ARCH_MEDIATEK && ARM) || COMPILE_TEST
 	select COMMON_CLK_MEDIATEK
 	default ARCH_MEDIATEK && ARM
-	---help---
+	help
 	  This driver supports MediaTek MT2701 basic clocks.

 config COMMON_CLK_MT2701_MMSYS
 	bool "Clock driver for MediaTek MT2701 mmsys"
 	depends on COMMON_CLK_MT2701
-	---help---
+	help
 	  This driver supports MediaTek MT2701 mmsys clocks.

 config COMMON_CLK_MT2701_IMGSYS
 	bool "Clock driver for MediaTek MT2701 imgsys"
 	depends on COMMON_CLK_MT2701
-	---help---
+	help
 	  This driver supports MediaTek MT2701 imgsys clocks.

 config COMMON_CLK_MT2701_VDECSYS
 	bool "Clock driver for MediaTek MT2701 vdecsys"
 	depends on COMMON_CLK_MT2701
-	---help---
+	help
 	  This driver supports MediaTek MT2701 vdecsys clocks.

 config COMMON_CLK_MT2701_HIFSYS
 	bool "Clock driver for MediaTek MT2701 hifsys"
 	depends on COMMON_CLK_MT2701
-	---help---
+	help
 	  This driver supports MediaTek MT2701 hifsys clocks.

 config COMMON_CLK_MT2701_ETHSYS
 	bool "Clock driver for MediaTek MT2701 ethsys"
 	depends on COMMON_CLK_MT2701
-	---help---
+	help
 	  This driver supports MediaTek MT2701 ethsys clocks.

 config COMMON_CLK_MT2701_BDPSYS
 	bool "Clock driver for MediaTek MT2701 bdpsys"
 	depends on COMMON_CLK_MT2701
-	---help---
+	help
 	  This driver supports MediaTek MT2701 bdpsys clocks.

 config COMMON_CLK_MT2701_AUDSYS
 	bool "Clock driver for Mediatek MT2701 audsys"
 	depends on COMMON_CLK_MT2701
-	---help---
+	help
 	  This driver supports Mediatek MT2701 audsys clocks.

 config COMMON_CLK_MT2701_G3DSYS
 	bool "Clock driver for MediaTek MT2701 g3dsys"
 	depends on COMMON_CLK_MT2701
-	---help---
+	help
 	  This driver supports MediaTek MT2701 g3dsys clocks.

 config COMMON_CLK_MT2712
@@ -72,49 +72,49 @@ config COMMON_CLK_MT2712
 	depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
 	select COMMON_CLK_MEDIATEK
 	default ARCH_MEDIATEK && ARM64
-	---help---
+	help
 	  This driver supports MediaTek MT2712 basic clocks.

 config COMMON_CLK_MT2712_BDPSYS
 	bool "Clock driver for MediaTek MT2712 bdpsys"
 	depends on COMMON_CLK_MT2712
-	---help---
+	help
 	  This driver supports MediaTek MT2712 bdpsys clocks.

 config COMMON_CLK_MT2712_IMGSYS
 	bool "Clock driver for MediaTek MT2712 imgsys"
 	depends on COMMON_CLK_MT2712
-	---help---
+	help
 	  This driver supports MediaTek MT2712 imgsys clocks.

 config COMMON_CLK_MT2712_JPGDECSYS
 	bool "Clock driver for MediaTek MT2712 jpgdecsys"
 	depends on COMMON_CLK_MT2712
-	---help---
+	help
 	  This driver supports MediaTek MT2712 jpgdecsys clocks.

 config COMMON_CLK_MT2712_MFGCFG
 	bool "Clock driver for MediaTek MT2712 mfgcfg"
 	depends on COMMON_CLK_MT2712
-	---help---
+	help
 	  This driver supports MediaTek MT2712 mfgcfg clocks.

 config COMMON_CLK_MT2712_MMSYS
 	bool "Clock driver for MediaTek MT2712 mmsys"
 	depends on COMMON_CLK_MT2712
-	---help---
+	help
 	  This driver supports MediaTek MT2712 mmsys clocks.

 config COMMON_CLK_MT2712_VDECSYS
 	bool "Clock driver for MediaTek MT2712 vdecsys"
 	depends on COMMON_CLK_MT2712
-	---help---
+	help
 	  This driver supports MediaTek MT2712 vdecsys clocks.

 config COMMON_CLK_MT2712_VENCSYS
 	bool "Clock driver for MediaTek MT2712 vencsys"
 	depends on COMMON_CLK_MT2712
-	---help---
+	help
 	  This driver supports MediaTek MT2712 vencsys clocks.

 config COMMON_CLK_MT6765
@@ -264,31 +264,31 @@ config COMMON_CLK_MT6797
 	depends on (ARCH_MEDIATEK && ARM64) || COMPILE_TEST
 	select COMMON_CLK_MEDIATEK
 	default ARCH_MEDIATEK && ARM64
-	---help---
+	help
 	  This driver supports MediaTek MT6797 basic clocks.

 config COMMON_CLK_MT6797_MMSYS
 	bool "Clock driver for MediaTek MT6797 mmsys"
 	depends on COMMON_CLK_MT6797
-	---help---
+	help
 	  This driver supports MediaTek MT6797 mmsys clocks.

 config COMMON_CLK_MT6797_IMGSYS
 	bool "Clock driver for MediaTek MT6797 imgsys"
 	depends on COMMON_CLK_MT6797
-	---help---
+	help
 	  This driver supports MediaTek MT6797 imgsys clocks.

 config COMMON_CLK_MT6797_VDECSYS
 	bool "Clock driver for MediaTek MT6797 vdecsys"
 	depends on COMMON_CLK_MT6797
-	---help---
+	help
 	  This driver supports MediaTek MT6797 vdecsys clocks.

 config COMMON_CLK_MT6797_VENCSYS
 	bool "Clock driver for MediaTek MT6797 vencsys"
 	depends on COMMON_CLK_MT6797
-	---help---
+	help
 	  This driver supports MediaTek MT6797 vencsys clocks.

 config COMMON_CLK_MT7622
@@ -296,28 +296,28 @@ config COMMON_CLK_MT7622
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 	select COMMON_CLK_MEDIATEK
 	default ARCH_MEDIATEK
-	---help---
+	help
 	  This driver supports MediaTek MT7622 basic clocks and clocks
 	  required for various periperals found on MediaTek.

 config COMMON_CLK_MT7622_ETHSYS
 	bool "Clock driver for MediaTek MT7622 ETHSYS"
 	depends on COMMON_CLK_MT7622
-	---help---
+	help
 	  This driver add support for clocks for Ethernet and SGMII
 	  required on MediaTek MT7622 SoC.

 config COMMON_CLK_MT7622_HIFSYS
 	bool "Clock driver for MediaTek MT7622 HIFSYS"
 	depends on COMMON_CLK_MT7622
-	---help---
+	help
 	  This driver supports MediaTek MT7622 HIFSYS clocks providing
 	  to PCI-E and USB.

 config COMMON_CLK_MT7622_AUDSYS
 	bool "Clock driver for MediaTek MT7622 AUDSYS"
 	depends on COMMON_CLK_MT7622
-	---help---
+	help
 	  This driver supports MediaTek MT7622 AUDSYS clocks providing
 	  to audio consumers such as I2S and TDM.

@@ -326,21 +326,21 @@ config COMMON_CLK_MT7629
 	depends on (ARCH_MEDIATEK && ARM) || COMPILE_TEST
 	select COMMON_CLK_MEDIATEK
 	default ARCH_MEDIATEK && ARM
-	---help---
+	help
 	  This driver supports MediaTek MT7629 basic clocks and clocks
 	  required for various periperals found on MediaTek.

 config COMMON_CLK_MT7629_ETHSYS
 	bool "Clock driver for MediaTek MT7629 ETHSYS"
 	depends on COMMON_CLK_MT7629
-	---help---
+	help
 	  This driver add support for clocks for Ethernet and SGMII
 	  required on MediaTek MT7629 SoC.

 config COMMON_CLK_MT7629_HIFSYS
 	bool "Clock driver for MediaTek MT7629 HIFSYS"
 	depends on COMMON_CLK_MT7629
-	---help---
+	help
 	  This driver supports MediaTek MT7629 HIFSYS clocks providing
 	  to PCI-E and USB.

@@ -349,7 +349,7 @@ config COMMON_CLK_MT8135
 	depends on (ARCH_MEDIATEK && ARM) || COMPILE_TEST
 	select COMMON_CLK_MEDIATEK
 	default ARCH_MEDIATEK && ARM
-	---help---
+	help
 	  This driver supports MediaTek MT8135 clocks.

 config COMMON_CLK_MT8173
@@ -357,7 +357,7 @@ config COMMON_CLK_MT8173
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 	select COMMON_CLK_MEDIATEK
 	default ARCH_MEDIATEK
-	---help---
+	help
 	  This driver supports MediaTek MT8173 clocks.

 config COMMON_CLK_MT8173_MMSYS

--- a/drivers/clk/ti/Kconfig
+++ b/drivers/clk/ti/Kconfig
@@ -3,5 +3,5 @@ config COMMON_CLK_TI_ADPLL
 	tristate "Clock driver for dm814x ADPLL"
 	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	default y if SOC_TI81XX
-	---help---
+	help
 	  ADPLL clock driver for the dm814x SoC using common clock framework.
--- a/drivers/clk/versatile/Kconfig
+++ b/drivers/clk/versatile/Kconfig
@@ -7,7 +7,7 @@ menu "Clock driver for ARM Reference designs"
 config ICST
 	bool "Clock driver for ARM Reference designs ICST"
 	select REGMAP_MMIO
-	---help---
+	help
 	  Supports clocking on ARM Reference designs:
 	  - Integrator/AP and Integrator/CP
 	  - RealView PB1176, EB, PB11MP and PBX
@@ -15,7 +15,7 @@ config ICST
 config CLK_SP810
 	bool "Clock driver for ARM SP810 System Controller"
 	default y if (ARCH_VEXPRESS && ARM)
-	---help---
+	help
 	  Supports clock muxing (REFCLK/TIMCLK to TIMERCLKEN0-3) capabilities
 	  of the ARM SP810 System Controller cell.

@@ -24,7 +24,7 @@ config CLK_VEXPRESS_OSC
 	depends on VEXPRESS_CONFIG
 	select REGMAP_MMIO
 	default y if ARCH_VEXPRESS
-	---help---
+	help
 	  Simple regmap-based driver driving clock generators on Versatile
 	  Express platforms hidden behind its configuration infrastructure,
 	  commonly known as OSCs.

--- a/drivers/connector/Kconfig
+++ b/drivers/connector/Kconfig
@@ -3,7 +3,7 @@
 menuconfig CONNECTOR
 	tristate "Connector - unified userspace <-> kernelspace linker"
 	depends on NET
-	---help---
+	help
 	  This is unified userspace <-> kernelspace connector working on top
 	  of the netlink socket protocol.

@@ -16,7 +16,7 @@ config PROC_EVENTS
 	bool "Report process events to userspace"
 	depends on CONNECTOR=y
 	default y
-	---help---
+	help
 	  Provide a connector that reports process events to userspace. Send
 	  events such as fork, exec, id change (uid, gid, suid, etc), and exit.


--- a/drivers/cpufreq/Kconfig.x86
+++ b/drivers/cpufreq/Kconfig.x86
@@ -75,7 +75,7 @@ config X86_SFI_CPUFREQ
 config ELAN_CPUFREQ
 	tristate "AMD Elan SC400 and SC410"
 	depends on MELAN
-	---help---
+	help
 	  This adds the CPUFreq driver for AMD Elan SC400 and SC410
 	  processors.

@@ -90,7 +90,7 @@ config ELAN_CPUFREQ
 config SC520_CPUFREQ
 	tristate "AMD Elan SC520"
 	depends on MELAN
-	---help---
+	help
 	  This adds the CPUFreq driver for AMD Elan SC520 processor.

 	  For details, take a look at <file:Documentation/cpu-freq/>.

--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -3,7 +3,7 @@
 menuconfig CRYPTO_HW
 	bool "Hardware crypto devices"
 	default y
-	---help---
+	help
 	  Say Y here to get to see options for hardware crypto devices and
 	  processors. This option alone does not add any kernel code.

@@ -334,7 +334,7 @@ config HW_RANDOM_PPC4XX
 	bool "PowerPC 4xx generic true random number generator support"
 	depends on CRYPTO_DEV_PPC4XX && HW_RANDOM
 	default y
-	---help---
+	help
 	 This option provides the kernel-side support for the TRNG hardware
 	 found in the security function of some PowerPC 4xx SoCs.

@@ -420,7 +420,7 @@ config CRYPTO_DEV_EXYNOS_RNG
 	depends on ARCH_EXYNOS || COMPILE_TEST
 	depends on HAS_IOMEM
 	select CRYPTO_RNG
-	---help---
+	help
 	  This driver provides kernel-side support through the
 	  cryptographic API for the pseudo random number generator hardware
 	  found on Exynos SoCs.
@@ -597,7 +597,7 @@ source "drivers/crypto/marvell/Kconfig"
 config CRYPTO_DEV_CAVIUM_ZIP
 	tristate "Cavium ZIP driver"
 	depends on PCI && 64BIT && (ARM64 || COMPILE_TEST)
-	---help---
+	help
 	  Select this option if you want to enable compression/decompression
 	  acceleration on Cavium's ARM based SoCs


--- a/drivers/crypto/chelsio/Kconfig
+++ b/drivers/crypto/chelsio/Kconfig
@@ -8,7 +8,7 @@ config CRYPTO_DEV_CHELSIO
 	select CRYPTO_SHA512
 	select CRYPTO_AUTHENC
 	select CRYPTO_GF128MUL
-	---help---
+	help
 	  The Chelsio Crypto Co-processor driver for T6 adapters.

 	  For general information about Chelsio and our products, visit
@@ -29,7 +29,7 @@ config CHELSIO_IPSEC_INLINE
 	depends on XFRM_OFFLOAD
 	depends on INET_ESP_OFFLOAD || INET6_ESP_OFFLOAD
 	default n
-	---help---
+	help
 	  Enable support for IPSec Tx Inline.

 config CRYPTO_DEV_CHELSIO_TLS
@@ -37,7 +37,7 @@ config CRYPTO_DEV_CHELSIO_TLS
 	depends on CHELSIO_T4
 	depends on TLS_TOE
 	select CRYPTO_DEV_CHELSIO
-	---help---
+	help
 	  Support Chelsio Inline TLS with Chelsio crypto accelerator.

 	  To compile this driver as a module, choose M here: the module

--- a/drivers/dma-buf/Kconfig
+++ b/drivers/dma-buf/Kconfig
@@ -5,7 +5,7 @@ config SYNC_FILE
 	bool "Explicit Synchronization Framework"
 	default n
 	select DMA_SHARED_BUFFER
-	---help---
+	help
 	  The Sync File Framework adds explicit synchronization via
 	  userspace. It enables send/receive 'struct dma_fence' objects to/from
 	  userspace via Sync File fds for synchronization between drivers via
@@ -22,7 +22,7 @@ config SW_SYNC
 	default n
 	depends on SYNC_FILE
 	depends on DEBUG_FS
-	---help---
+	help
 	  A sync object driver that uses a 32bit counter to coordinate
 	  synchronization.  Useful when there is no hardware primitive backing
 	  the synchronization.

--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -198,7 +198,7 @@ config FSL_DMA
 	depends on FSL_SOC
 	select DMA_ENGINE
 	select ASYNC_TX_ENABLE_CHANNEL_SWITCH
-	---help---
+	help
 	  Enable support for the Freescale Elo series DMA controllers.
 	  The Elo is the DMA controller on some mpc82xx and mpc83xx parts, the
 	  EloPlus is on mpc85xx and mpc86xx and Pxxx parts, and the Elo3 is on
@@ -233,7 +233,7 @@ config FSL_RAID
 	depends on FSL_SOC && !ASYNC_TX_ENABLE_CHANNEL_SWITCH
 	select DMA_ENGINE
 	select DMA_ENGINE_RAID
-	---help---
+	help
 	  Enable support for Freescale RAID Engine. RAID Engine is
 	  available on some QorIQ SoCs (like P5020/P5040). It has
 	  the capability to offload memcpy, xor and pq computation
@@ -414,7 +414,7 @@ config MPC512X_DMA
 	tristate "Freescale MPC512x built-in DMA engine support"
 	depends on PPC_MPC512x || PPC_MPC831x
 	select DMA_ENGINE
-	---help---
+	help
 	  Enable support for the Freescale MPC512x built-in DMA engine.

 config MV_XOR
@@ -423,7 +423,7 @@ config MV_XOR
 	select DMA_ENGINE
 	select DMA_ENGINE_RAID
 	select ASYNC_TX_ENABLE_CHANNEL_SWITCH
-	---help---
+	help
 	  Enable support for the Marvell XOR engine.

 config MV_XOR_V2
@@ -433,7 +433,7 @@ config MV_XOR_V2
 	select DMA_ENGINE_RAID
 	select ASYNC_TX_ENABLE_CHANNEL_SWITCH
 	select GENERIC_MSI_IRQ_DOMAIN
-	---help---
+	help
 	  Enable support for the Marvell version 2 XOR engine.

 	  This engine provides acceleration for copy, XOR and RAID6

--- a/drivers/dma/mediatek/Kconfig
+++ b/drivers/dma/mediatek/Kconfig
@@ -5,7 +5,7 @@ config MTK_HSDMA
 	depends on ARCH_MEDIATEK || COMPILE_TEST
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
-	---help---
+	help
 	  Enable support for High-Speed DMA controller on MediaTek
 	  SoCs.


--- a/drivers/dma/qcom/Kconfig
+++ b/drivers/dma/qcom/Kconfig
@@ -4,7 +4,7 @@ config QCOM_BAM_DMA
 	depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
-	---help---
+	help
 	  Enable support for the QCOM BAM DMA controller.  This controller
 	  provides DMA capabilities for a variety of on-chip devices.


--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -44,7 +44,7 @@ config EDAC_DECODE_MCE
 	tristate "Decode MCEs in human-readable form (only on AMD for now)"
 	depends on CPU_SUP_AMD && X86_MCE_AMD
 	default y
-	---help---
+	help
 	  Enable this option if you want to decode Machine Check Exceptions
 	  occurring on your machine in human-readable form.


--- a/drivers/eisa/Kconfig
+++ b/drivers/eisa/Kconfig
@@ -9,7 +9,7 @@ config HAVE_EISA
 menuconfig EISA
 	bool "EISA support"
 	depends on HAVE_EISA
-	---help---
+	help
 	  The Extended Industry Standard Architecture (EISA) bus was
 	  developed as an open alternative to the IBM MicroChannel bus.

@@ -26,7 +26,7 @@ config EISA_VLB_PRIMING
 	bool "Vesa Local Bus priming"
 	depends on X86 && EISA
 	default n
-	---help---
+	help
 	  Activate this option if your system contains a Vesa Local
 	  Bus (VLB) card that identify itself as an EISA card (such as
 	  the Adaptec AHA-284x).
@@ -37,7 +37,7 @@ config EISA_PCI_EISA
 	bool "Generic PCI/EISA bridge"
 	depends on !PARISC && PCI && EISA
 	default y
-	---help---
+	help
 	  Activate this option if your system contains a PCI to EISA
 	  bridge. If your system have both PCI and EISA slots, you
 	  certainly need this option.
@@ -51,7 +51,7 @@ config EISA_VIRTUAL_ROOT
 	bool "EISA virtual root device"
 	depends on EISA && (ALPHA || X86)
 	default y
-	---help---
+	help
 	  Activate this option if your system only have EISA bus
 	  (no PCI slots). The Alpha Jensen is an example of such
 	  a system.
@@ -62,7 +62,7 @@ config EISA_NAMES
 	bool "EISA device name database"
 	depends on EISA
 	default y
-	---help---
+	help
 	  By default, the kernel contains a database of all known EISA
 	  device names to make the information in sysfs comprehensible
 	  to the user. This database increases size of the kernel

--- a/drivers/firmware/efi/Kconfig
+++ b/drivers/firmware/efi/Kconfig
@@ -139,7 +139,7 @@ config EFI_BOOTLOADER_CONTROL
 	tristate "EFI Bootloader Control"
 	depends on EFI_VARS
 	default n
-	---help---
+	help
 	  This module installs a reboot hook, such that if reboot() is
 	  invoked with a string argument NNN, "NNN" is copied to the
 	  "LoaderEntryOneShot" EFI variable, to be read by the

--- a/drivers/fsi/Kconfig
+++ b/drivers/fsi/Kconfig
@@ -7,7 +7,7 @@ menuconfig FSI
 	tristate "FSI support"
 	depends on OF
 	select CRC4
-	---help---
+	help
 	  FSI - the FRU Support Interface - is a simple bus for low-level
 	  access to POWER-based hardware.

@@ -16,7 +16,7 @@ if FSI
 config FSI_NEW_DEV_NODE
 	bool "Create '/dev/fsi' directory for char devices"
 	default n
-	---help---
+	help
 	This option causes char devices created for FSI devices to be
 	located under a common /dev/fsi/ directory. Set to N unless your
 	userspace has been updated to handle the new location.
@@ -32,12 +32,12 @@ config FSI_MASTER_GPIO
 	tristate "GPIO-based FSI master"
 	depends on GPIOLIB
 	select CRC4
-	---help---
+	help
 	This option enables a FSI master driver using GPIO lines.

 config FSI_MASTER_HUB
 	tristate "FSI hub master"
-	---help---
+	help
 	This option enables a FSI hub master driver.  Hub is a type of FSI
 	master that is connected to the upstream master via a slave.  Hubs
 	allow chaining of FSI links to an arbitrary depth.  This allows for
@@ -48,7 +48,7 @@ config FSI_MASTER_AST_CF
 	depends on GPIOLIB
 	depends on GPIO_ASPEED
 	select GENERIC_ALLOCATOR
-	---help---
+	help
 	This option enables a FSI master using the AST2400 and AST2500 GPIO
 	lines driven by the internal ColdFire coprocessor. This requires
 	the corresponding machine specific ColdFire firmware to be available.
@@ -64,13 +64,13 @@ config FSI_MASTER_ASPEED

 config FSI_SCOM
 	tristate "SCOM FSI client device driver"
-	---help---
+	help
 	This option enables an FSI based SCOM device driver.

 config FSI_SBEFIFO
 	tristate "SBEFIFO FSI client device driver"
 	depends on OF_ADDRESS
-	---help---
+	help
 	This option enables an FSI based SBEFIFO device driver. The SBEFIFO is
 	a pipe-like FSI device for communicating with the self boot engine
 	(SBE) on POWER processors.
@@ -78,7 +78,7 @@ config FSI_SBEFIFO
 config FSI_OCC
 	tristate "OCC SBEFIFO client device driver"
 	depends on FSI_SBEFIFO
-	---help---
+	help
 	This option enables an SBEFIFO based On-Chip Controller (OCC) device
 	driver. The OCC is a device embedded on a POWER processor that collects
 	and aggregates sensor data from the processor and system. The OCC can

--- a/drivers/gnss/Kconfig
+++ b/drivers/gnss/Kconfig
@@ -5,7 +5,7 @@

 menuconfig GNSS
 	tristate "GNSS receiver support"
-	---help---
+	help
 	  Say Y here if you have a GNSS receiver (e.g. a GPS receiver).

 	  To compile this driver as a module, choose M here: the module will
@@ -32,7 +32,7 @@ config GNSS_MTK_SERIAL
 config GNSS_SIRF_SERIAL
 	tristate "SiRFstar GNSS receiver support"
 	depends on SERIAL_DEV_BUS
-	---help---
+	help
 	  Say Y here if you have a SiRFstar-based GNSS receiver which uses a
 	  serial interface.

@@ -45,7 +45,7 @@ config GNSS_UBX_SERIAL
 	tristate "u-blox GNSS receiver support"
 	depends on SERIAL_DEV_BUS
 	select GNSS_SERIAL
-	---help---
+	help
 	  Say Y here if you have a u-blox GNSS receiver which uses a serial
 	  interface.


--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1236,7 +1236,7 @@ config GPIO_TC3589X
 config GPIO_TIMBERDALE
 	bool "Support for timberdale GPIO IP"
 	depends on MFD_TIMBERDALE
-	---help---
+	help
 	Add support for the GPIO IP in the timberdale FPGA.

 config GPIO_TPS65086

--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -62,7 +62,7 @@ config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW
 	depends on OF
 	select DRM_KMS_HELPER
 	select DRM_PANEL
-	---help---
+	help
 	  This is a driver for the display bridges of
 	  GE B850v3 that convert dual channel LVDS
 	  to DP++. This is used with the i.MX6 imx-ldb
@@ -89,7 +89,7 @@ config DRM_NXP_PTN3460
 	depends on OF
 	select DRM_KMS_HELPER
 	select DRM_PANEL
-	---help---
+	help
 	  NXP PTN3460 eDP-LVDS bridge chip driver.

 config DRM_PARADE_PS8622
@@ -98,7 +98,7 @@ config DRM_PARADE_PS8622
 	select DRM_PANEL
 	select DRM_KMS_HELPER
 	select BACKLIGHT_CLASS_DEVICE
-	---help---
+	help
 	  Parade eDP-LVDS bridge chip driver.

 config DRM_PARADE_PS8640
@@ -128,13 +128,13 @@ config DRM_SII902X
 	select REGMAP_I2C
 	select I2C_MUX
 	select SND_SOC_HDMI_CODEC if SND_SOC
-	---help---
+	help
 	  Silicon Image sii902x bridge chip driver.

 config DRM_SII9234
 	tristate "Silicon Image SII9234 HDMI/MHL bridge"
 	depends on OF
-	---help---
+	help
 	  Say Y here if you want support for the MHL interface.
 	  It is an I2C driver, that detects connection of MHL bridge
 	  and starts encapsulation of HDMI signal.
@@ -150,7 +150,7 @@ config DRM_SIMPLE_BRIDGE
 config DRM_THINE_THC63LVD1024
 	tristate "Thine THC63LVD1024 LVDS decoder bridge"
 	depends on OF
-	---help---
+	help
 	  Thine THC63LVD1024 LVDS/parallel converter driver.

 config DRM_TOSHIBA_TC358764
@@ -168,7 +168,7 @@ config DRM_TOSHIBA_TC358767
 	select DRM_KMS_HELPER
 	select REGMAP_I2C
 	select DRM_PANEL
-	---help---
+	help
 	  Toshiba TC358767 eDP bridge chip driver.

 config DRM_TOSHIBA_TC358768
@@ -185,7 +185,7 @@ config DRM_TI_TFP410
 	tristate "TI TFP410 DVI/HDMI bridge"
 	depends on OF
 	select DRM_KMS_HELPER
-	---help---
+	help
 	  Texas Instruments TFP410 DVI/HDMI Transmitter driver

 config DRM_TI_SN65DSI86

--- a/drivers/gpu/drm/omapdrm/dss/Kconfig
+++ b/drivers/gpu/drm/omapdrm/dss/Kconfig
@@ -71,7 +71,7 @@ config OMAP4_DSS_HDMI_CEC
 	depends on OMAP4_DSS_HDMI
 	select CEC_CORE
 	default y
-	---help---
+	help
 	  When selected the HDMI transmitter will support the CEC feature.

 config OMAP5_DSS_HDMI

--- a/drivers/greybus/Kconfig
+++ b/drivers/greybus/Kconfig
@@ -2,7 +2,7 @@
 menuconfig GREYBUS
 	tristate "Greybus support"
 	depends on SYSFS
-	---help---
+	help
 	  This option enables the Greybus driver core.  Greybus is a
 	  hardware protocol that was designed to provide Unipro with a
 	  sane application layer.  It was originally designed for the
@@ -20,7 +20,7 @@ if GREYBUS
 config GREYBUS_ES2
 	tristate "Greybus ES3 USB host controller"
 	depends on USB
-	---help---
+	help
 	  Select this option if you have a Toshiba ES3 USB device that
 	  acts as a Greybus "host controller".  This device is a bridge
 	  from a USB device to a Unipro network.

--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
--- a/drivers/hid/i2c-hid/Kconfig
+++ b/drivers/hid/i2c-hid/Kconfig
@@ -7,7 +7,7 @@ config I2C_HID
 	default n
 	depends on I2C && INPUT
 	select HID
-	---help---
+	help
 	  Say Y here if you use a keyboard, a touchpad, a touchscreen, or any
 	  other HID based devices which is connected to your computer via I2C.


--- a/drivers/hid/usbhid/Kconfig
+++ b/drivers/hid/usbhid/Kconfig
@@ -7,7 +7,7 @@ config USB_HID
 	default y
 	depends on USB && INPUT
 	select HID
-	---help---
+	help
 	  Say Y here if you want to connect USB keyboards,
 	  mice, joysticks, graphic tablets, or any other HID based devices
 	  to your computer via USB, as well as Uninterruptible Power Supply
@@ -51,7 +51,7 @@ menu "USB HID Boot Protocol drivers"
 config USB_KBD
 	tristate "USB HIDBP Keyboard (simple Boot) support"
 	depends on USB && INPUT
-	---help---
+	help
 	  Say Y here only if you are absolutely sure that you don't want
 	  to use the generic HID driver for your USB keyboard and prefer
 	  to use the keyboard in its limited Boot Protocol mode instead.
@@ -67,7 +67,7 @@ config USB_KBD
 config USB_MOUSE
 	tristate "USB HIDBP Mouse (simple Boot) support"
 	depends on USB && INPUT
-	---help---
+	help
 	  Say Y here only if you are absolutely sure that you don't want
 	  to use the generic HID driver for your USB mouse and prefer
 	  to use the mouse in its limited Boot Protocol mode instead.

--- a/drivers/hsi/Kconfig
+++ b/drivers/hsi/Kconfig
@@ -4,7 +4,7 @@
 #
 menuconfig HSI
 	tristate "HSI support"
-	---help---
+	help
 	  The "High speed synchronous Serial Interface" is
 	  synchronous serial interface used mainly to connect
 	  application engines and cellular modems.

--- a/drivers/hsi/clients/Kconfig
+++ b/drivers/hsi/clients/Kconfig
@@ -35,7 +35,7 @@ config SSI_PROTOCOL
 config HSI_CHAR
 	tristate "HSI/SSI character driver"
 	depends on HSI
-	---help---
+	help
 	  If you say Y here, you will enable the HSI/SSI character driver.
 	  This driver provides a simple character device interface for
 	  serial communication with the cellular modem over HSI/SSI bus.
--- a/drivers/hsi/controllers/Kconfig
+++ b/drivers/hsi/controllers/Kconfig
@@ -8,7 +8,7 @@ config OMAP_SSI
 	tristate "OMAP SSI hardware driver"
 	depends on HSI && OF && ARM && COMMON_CLK
 	depends on ARCH_OMAP3 || COMPILE_TEST
-	---help---
+	help
 	  SSI is a legacy version of HSI. It is usually used to connect
 	  an application engine with a cellular modem.
 	  If you say Y here, you will enable the OMAP SSI hardware driver.

--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -9,7 +9,7 @@ config I2C
 	tristate "I2C support"
 	select RT_MUTEXES
 	select IRQ_DOMAIN
-	---help---
+	help
 	  I2C (pronounce: I-squared-C) is a slow serial bus protocol used in
 	  many micro controller applications and developed by Philips.  SMBus,
 	  or System Management Bus is a subset of the I2C protocol.  More

--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -12,7 +12,7 @@ menuconfig IDE
 	depends on HAVE_IDE
 	depends on BLOCK
 	select BLK_SCSI_REQUEST
-	---help---
+	help
 	  If you say Y here, your kernel will be able to manage ATA/(E)IDE and
 	  ATAPI units. The most common cases are IDE hard drives and ATAPI
 	  CD-ROM drives.
@@ -49,7 +49,7 @@ config IDE_LEGACY
 config BLK_DEV_IDE_SATA
 	bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
 	default n
-	---help---
+	help
 	  There are two drivers for Serial ATA controllers.

 	  The main driver, "libata", uses the SCSI subsystem
@@ -121,7 +121,7 @@ config BLK_DEV_IDECD
 	depends on BLK_DEV
 	select IDE_ATAPI
 	select CDROM
-	---help---
+	help
 	  If you have a CD-ROM drive using the ATAPI protocol, say Y. ATAPI is
 	  a newer protocol used by IDE CD-ROM and TAPE drives, similar to the
 	  SCSI protocol. Most new CD-ROM drives use ATAPI, including the
@@ -172,7 +172,7 @@ config BLK_DEV_IDETAPE
 config BLK_DEV_IDEACPI
 	bool "IDE ACPI support"
 	depends on ACPI
-	---help---
+	help
 	  Implement ACPI support for generic IDE devices. On modern
 	  machines ACPI support is required to properly handle ACPI S3 states.

@@ -232,7 +232,7 @@ config BLK_DEV_CMD640
 	tristate "CMD640 chipset bugfix/support"
 	depends on X86
 	select IDE_TIMINGS
-	---help---
+	help
 	  The CMD-Technologies CMD640 IDE chip is used on many common 486 and
 	  Pentium motherboards, usually in combination with a "Neptune" or
 	  "SiS" chipset. Unfortunately, it has a number of rather nasty

--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -325,7 +325,7 @@ config MAX5821
 config MCP4725
 	tristate "MCP4725/6 DAC driver"
 	depends on I2C
-	---help---
+	help
 	  Say Y here if you want to build a driver for the Microchip
 	  MCP 4725/6 12-bit digital-to-analog converter (DAC) with I2C
 	  interface.

--- a/drivers/infiniband/Kconfig
+++ b/drivers/infiniband/Kconfig
@@ -8,7 +8,7 @@ menuconfig INFINIBAND
 	depends on !ALPHA
 	select IRQ_POLL
 	select DIMLIB
-	---help---
+	help
 	  Core support for InfiniBand (IB).  Make sure to also select
 	  any protocols you wish to use as well as drivers for your
 	  InfiniBand hardware.
@@ -18,7 +18,7 @@ if INFINIBAND
 config INFINIBAND_USER_MAD
 	tristate "InfiniBand userspace MAD support"
 	depends on INFINIBAND
-	---help---
+	help
 	  Userspace InfiniBand Management Datagram (MAD) support.  This
 	  is the kernel side of the userspace MAD support, which allows
 	  userspace processes to send and receive MADs. You will also
@@ -28,7 +28,7 @@ config INFINIBAND_USER_MAD
 config INFINIBAND_USER_ACCESS
 	tristate "InfiniBand userspace access (verbs and CM)"
 	depends on MMU
-	---help---
+	help
 	  Userspace InfiniBand access support.  This enables the
 	  kernel side of userspace verbs and the userspace
 	  communication manager (CM).  This allows userspace processes
@@ -40,7 +40,7 @@ config INFINIBAND_USER_ACCESS
 config INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI
 	bool "Allow experimental legacy verbs in new ioctl uAPI  (EXPERIMENTAL)"
 	depends on INFINIBAND_USER_ACCESS
-	---help---
+	help
 	  IOCTL based uAPI support for Infiniband is enabled by default for
 	  new verbs only. This allows userspace to invoke the IOCTL based uAPI
 	  for current legacy verbs too.
@@ -57,7 +57,7 @@ config INFINIBAND_ON_DEMAND_PAGING
 	select MMU_NOTIFIER
 	select INTERVAL_TREE
 	default y
-	---help---
+	help
 	  On demand paging support for the InfiniBand subsystem.
 	  Together with driver support this allows registration of
 	  memory regions without pinning their pages, fetching the
@@ -67,7 +67,7 @@ config INFINIBAND_ADDR_TRANS
 	bool "RDMA/CM"
 	depends on INFINIBAND
 	default y
-	---help---
+	help
 	  Support for RDMA communication manager (CM).
 	  This allows for a generic connection abstraction over RDMA.

@@ -75,7 +75,7 @@ config INFINIBAND_ADDR_TRANS_CONFIGFS
 	bool
 	depends on INFINIBAND_ADDR_TRANS && CONFIGFS_FS && !(INFINIBAND=y && CONFIGFS_FS=m)
 	default y
-	---help---
+	help
 	  ConfigFS support for RDMA communication manager (CM).
 	  This allows the user to config the default GID type that the CM
 	  uses for each device, when initiaing new connections.

--- a/drivers/infiniband/hw/bnxt_re/Kconfig
+++ b/drivers/infiniband/hw/bnxt_re/Kconfig
@@ -5,7 +5,7 @@ config INFINIBAND_BNXT_RE
 	depends on ETHERNET && NETDEVICES && PCI && INET && DCB
 	select NET_VENDOR_BROADCOM
 	select BNXT
-	---help---
+	help
 	  This driver supports Broadcom NetXtreme-E 10/25/40/50 gigabit
 	  RoCE HCAs.  To compile this driver as a module, choose M here:
 	  the module will be called bnxt_re.
--- a/drivers/infiniband/hw/cxgb4/Kconfig
+++ b/drivers/infiniband/hw/cxgb4/Kconfig
@@ -5,7 +5,7 @@ config INFINIBAND_CXGB4
 	depends on INFINIBAND_ADDR_TRANS
 	select CHELSIO_LIB
 	select GENERIC_ALLOCATOR
-	---help---
+	help
 	  This is an iWARP/RDMA driver for the Chelsio T4 and T5
 	  1GbE, 10GbE adapters and T5 40GbE adapter.


--- a/drivers/infiniband/hw/hfi1/Kconfig
+++ b/drivers/infiniband/hw/hfi1/Kconfig
@@ -5,19 +5,19 @@ config INFINIBAND_HFI1
 	select MMU_NOTIFIER
 	select CRC32
 	select I2C_ALGOBIT
-	---help---
+	help
 	This is a low-level driver for Intel OPA Gen1 adapter.
 config HFI1_DEBUG_SDMA_ORDER
 	bool "HFI1 SDMA Order debug"
 	depends on INFINIBAND_HFI1
 	default n
-	---help---
+	help
 	This is a debug flag to test for out of order
 	sdma completions for unit testing
 config SDMA_VERBOSITY
 	bool "Config SDMA Verbosity"
 	depends on INFINIBAND_HFI1
 	default n
-	---help---
+	help
 	This is a configuration flag to enable verbose
 	SDMA debug
--- a/drivers/infiniband/hw/hns/Kconfig
+++ b/drivers/infiniband/hw/hns/Kconfig
@@ -4,7 +4,7 @@ config INFINIBAND_HNS
 	depends on NET_VENDOR_HISILICON
 	depends on ARM64 || (COMPILE_TEST && 64BIT)
 	depends on (HNS_DSAF && HNS_ENET) || HNS3
-	---help---
+	help
 	  This is a RoCE/RDMA driver for the Hisilicon RoCE engine. The engine
 	  is used in Hisilicon Hip06 and more further ICT SoC based on
 	  platform device.
@@ -15,7 +15,7 @@ config INFINIBAND_HNS_HIP06
 	bool "Hisilicon Hip06 Family RoCE support"
 	depends on INFINIBAND_HNS && HNS && HNS_DSAF && HNS_ENET
 	depends on INFINIBAND_HNS=m || (HNS_DSAF=y && HNS_ENET=y)
-	---help---
+	help
 	  RoCE driver support for Hisilicon RoCE engine in Hisilicon Hip06 and
 	  Hip07 SoC. These RoCE engines are platform devices.

@@ -26,7 +26,7 @@ config INFINIBAND_HNS_HIP08
 	bool "Hisilicon Hip08 Family RoCE support"
 	depends on INFINIBAND_HNS && PCI && HNS3
 	depends on INFINIBAND_HNS=m || HNS3=y
-	---help---
+	help
 	  RoCE driver support for Hisilicon RoCE engine in Hisilicon Hip08 SoC.
 	  The RoCE engine is a PCI device.


--- a/drivers/infiniband/hw/i40iw/Kconfig
+++ b/drivers/infiniband/hw/i40iw/Kconfig
@@ -5,5 +5,5 @@ config INFINIBAND_I40IW
 	depends on IPV6 || !IPV6
 	depends on PCI
 	select GENERIC_ALLOCATOR
-	---help---
+	help
 	Intel(R) Ethernet X722 iWARP Driver
--- a/drivers/infiniband/hw/mlx4/Kconfig
+++ b/drivers/infiniband/hw/mlx4/Kconfig
@@ -4,7 +4,7 @@ config MLX4_INFINIBAND
 	depends on NETDEVICES && ETHERNET && PCI && INET
 	select NET_VENDOR_MELLANOX
 	select MLX4_CORE
-	---help---
+	help
 	  This driver provides low-level InfiniBand support for
 	  Mellanox ConnectX PCI Express host channel adapters (HCAs).
 	  This is required to use InfiniBand protocols such as

--- a/drivers/infiniband/hw/mlx5/Kconfig
+++ b/drivers/infiniband/hw/mlx5/Kconfig
@@ -2,7 +2,7 @@
 config MLX5_INFINIBAND
 	tristate "Mellanox 5th generation network adapters (ConnectX series) support"
 	depends on NETDEVICES && ETHERNET && PCI && MLX5_CORE
-	---help---
+	help
 	  This driver provides low-level InfiniBand support for
 	  Mellanox Connect-IB PCI Express host channel adapters (HCAs).
 	  This is required to use InfiniBand protocols such as

--- a/drivers/infiniband/hw/mthca/Kconfig
+++ b/drivers/infiniband/hw/mthca/Kconfig
@@ -2,7 +2,7 @@
 config INFINIBAND_MTHCA
 	tristate "Mellanox HCA support"
 	depends on PCI
-	---help---
+	help
 	  This is a low-level driver for Mellanox InfiniHost host
 	  channel adapters (HCAs), including the MT23108 PCI-X HCA
 	  ("Tavor") and the MT25208 PCI Express HCA ("Arbel").
@@ -11,7 +11,7 @@ config INFINIBAND_MTHCA_DEBUG
 	bool "Verbose debugging output" if EXPERT
 	depends on INFINIBAND_MTHCA
 	default y
-	---help---
+	help
 	  This option causes debugging code to be compiled into the
 	  mthca driver.  The output can be turned on via the
 	  debug_level module parameter (which can also be set after

--- a/drivers/infiniband/hw/ocrdma/Kconfig
+++ b/drivers/infiniband/hw/ocrdma/Kconfig
@@ -4,6 +4,6 @@ config INFINIBAND_OCRDMA
 	depends on ETHERNET && NETDEVICES && PCI && INET && (IPV6 || IPV6=n)
 	select NET_VENDOR_EMULEX
 	select BE2NET
-	---help---
+	help
 	  This driver provides low-level InfiniBand over Ethernet
 	  support for Emulex One Connect host channel adapters (HCAs).
--- a/drivers/infiniband/hw/qedr/Kconfig
+++ b/drivers/infiniband/hw/qedr/Kconfig
@@ -6,6 +6,6 @@ config INFINIBAND_QEDR
 	select QED_LL2
 	select QED_OOO
 	select QED_RDMA
-	---help---
+	help
 	  This driver provides low-level InfiniBand over Ethernet
 	  support for QLogic QED host channel adapters (HCAs).
--- a/drivers/infiniband/hw/qib/Kconfig
+++ b/drivers/infiniband/hw/qib/Kconfig
@@ -3,7 +3,7 @@ config INFINIBAND_QIB
 	tristate "Intel PCIe HCA support"
 	depends on 64BIT && INFINIBAND_RDMAVT
 	depends on PCI
-	---help---
+	help
 	This is a low-level driver for Intel PCIe QLE InfiniBand host
 	channel adapters.  This driver does not support the Intel
 	HyperTransport card (model QHT7140).
@@ -12,6 +12,6 @@ config INFINIBAND_QIB_DCA
 	bool "QIB DCA support"
 	depends on INFINIBAND_QIB && DCA && SMP && !(INFINIBAND_QIB=y && DCA=m)
 	default y
-	---help---
+	help
 	Setting this enables DCA support on some Intel chip sets
 	with the iba7322 HCA.
--- a/drivers/infiniband/hw/usnic/Kconfig
+++ b/drivers/infiniband/hw/usnic/Kconfig
@@ -6,6 +6,6 @@ config INFINIBAND_USNIC
 	select ENIC
 	select NET_VENDOR_CISCO
 	select PCI_IOV
-	---help---
+	help
 	  This is a low-level driver for Cisco's Virtual Interface
 	  Cards (VICs), including the VIC 1240 and 1280 cards.
--- a/drivers/infiniband/hw/vmw_pvrdma/Kconfig
+++ b/drivers/infiniband/hw/vmw_pvrdma/Kconfig
@@ -2,7 +2,7 @@
 config INFINIBAND_VMWARE_PVRDMA
 	tristate "VMware Paravirtualized RDMA Driver"
 	depends on NETDEVICES && ETHERNET && PCI && INET && VMXNET3
-	---help---
+	help
 	  This driver provides low-level support for VMware Paravirtual
 	  RDMA adapter. It interacts with the VMXNet3 driver to provide
 	  Ethernet capabilities.
--- a/drivers/infiniband/sw/rdmavt/Kconfig
+++ b/drivers/infiniband/sw/rdmavt/Kconfig
@@ -4,5 +4,5 @@ config INFINIBAND_RDMAVT
 	depends on X86_64 && ARCH_DMA_ADDR_T_64BIT
 	depends on PCI
 	select DMA_VIRT_OPS
-	---help---
+	help
 	This is a common software verbs provider for RDMA networks.
--- a/drivers/infiniband/sw/rxe/Kconfig
+++ b/drivers/infiniband/sw/rxe/Kconfig
@@ -6,7 +6,7 @@ config RDMA_RXE
 	select NET_UDP_TUNNEL
 	select CRYPTO_CRC32
 	select DMA_VIRT_OPS
-	---help---
+	help
 	This driver implements the InfiniBand RDMA transport over
 	the Linux network stack. It enables a system with a
 	standard Ethernet adapter to interoperate with a RoCE

--- a/drivers/infiniband/ulp/ipoib/Kconfig
+++ b/drivers/infiniband/ulp/ipoib/Kconfig
@@ -2,7 +2,7 @@
 config INFINIBAND_IPOIB
 	tristate "IP-over-InfiniBand"
 	depends on NETDEVICES && INET && (IPV6 || IPV6=n)
-	---help---
+	help
 	  Support for the IP-over-InfiniBand protocol (IPoIB). This
 	  transports IP packets over InfiniBand so you can use your IB
 	  device as a fancy NIC.
@@ -13,7 +13,7 @@ config INFINIBAND_IPOIB_CM
 	bool "IP-over-InfiniBand Connected Mode support"
 	depends on INFINIBAND_IPOIB
 	default n
-	---help---
+	help
 	  This option enables support for IPoIB connected mode.  After
 	  enabling this option, you need to switch to connected mode
 	  through /sys/class/net/ibXXX/mode to actually create
@@ -28,7 +28,7 @@ config INFINIBAND_IPOIB_DEBUG
 	bool "IP-over-InfiniBand debugging" if EXPERT
 	depends on INFINIBAND_IPOIB
 	default y
-	---help---
+	help
 	  This option causes debugging code to be compiled into the
 	  IPoIB driver.  The output can be turned on via the
 	  debug_level and mcast_debug_level module parameters (which
@@ -42,7 +42,7 @@ config INFINIBAND_IPOIB_DEBUG
 config INFINIBAND_IPOIB_DEBUG_DATA
 	bool "IP-over-InfiniBand data path debugging"
 	depends on INFINIBAND_IPOIB_DEBUG
-	---help---
+	help
 	  This option compiles debugging code into the data path
 	  of the IPoIB driver.  The output can be turned on via the
 	  data_debug_level module parameter; however, even with output

--- a/drivers/infiniband/ulp/iser/Kconfig
+++ b/drivers/infiniband/ulp/iser/Kconfig
@@ -3,7 +3,7 @@ config INFINIBAND_ISER
 	tristate "iSCSI Extensions for RDMA (iSER)"
 	depends on SCSI && INET && INFINIBAND_ADDR_TRANS
 	select SCSI_ISCSI_ATTRS
-	---help---
+	help
 	  Support for the iSCSI Extensions for RDMA (iSER) Protocol
 	  over InfiniBand. This allows you to access storage devices
 	  that speak iSCSI over iSER over InfiniBand.

--- a/drivers/infiniband/ulp/isert/Kconfig
+++ b/drivers/infiniband/ulp/isert/Kconfig
--- a/drivers/infiniband/ulp/opa_vnic/Kconfig
+++ b/drivers/infiniband/ulp/opa_vnic/Kconfig
--- a/drivers/infiniband/ulp/srp/Kconfig
+++ b/drivers/infiniband/ulp/srp/Kconfig
--- a/drivers/infiniband/ulp/srpt/Kconfig
+++ b/drivers/infiniband/ulp/srpt/Kconfig
--- a/drivers/input/gameport/Kconfig
+++ b/drivers/input/gameport/Kconfig
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
--- a/drivers/ipack/Kconfig
+++ b/drivers/ipack/Kconfig
--- a/drivers/isdn/Kconfig
+++ b/drivers/isdn/Kconfig
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
--- a/drivers/md/persistent-data/Kconfig
+++ b/drivers/md/persistent-data/Kconfig
--- a/drivers/media/cec/platform/Kconfig
+++ b/drivers/media/cec/platform/Kconfig
--- a/drivers/message/fusion/Kconfig
+++ b/drivers/message/fusion/Kconfig
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
--- a/drivers/misc/echo/Kconfig
+++ b/drivers/misc/echo/Kconfig
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
--- a/drivers/net/appletalk/Kconfig
+++ b/drivers/net/appletalk/Kconfig
--- a/drivers/net/arcnet/Kconfig
+++ b/drivers/net/arcnet/Kconfig
--- a/drivers/net/caif/Kconfig
+++ b/drivers/net/caif/Kconfig
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
--- a/drivers/net/can/c_can/Kconfig
+++ b/drivers/net/can/c_can/Kconfig
--- a/drivers/net/can/cc770/Kconfig
+++ b/drivers/net/can/cc770/Kconfig
--- a/drivers/net/can/ifi_canfd/Kconfig
+++ b/drivers/net/can/ifi_canfd/Kconfig
--- a/drivers/net/can/m_can/Kconfig
+++ b/drivers/net/can/m_can/Kconfig
--- a/drivers/net/can/mscan/Kconfig
+++ b/drivers/net/can/mscan/Kconfig
--- a/drivers/net/can/peak_canfd/Kconfig
+++ b/drivers/net/can/peak_canfd/Kconfig
--- a/drivers/net/can/rcar/Kconfig
+++ b/drivers/net/can/rcar/Kconfig
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
--- a/drivers/net/can/softing/Kconfig
+++ b/drivers/net/can/softing/Kconfig
--- a/drivers/net/can/spi/Kconfig
+++ b/drivers/net/can/spi/Kconfig
--- a/drivers/net/can/usb/Kconfig
+++ b/drivers/net/can/usb/Kconfig
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
--- a/drivers/net/dsa/qca/Kconfig
+++ b/drivers/net/dsa/qca/Kconfig
--- a/drivers/net/ethernet/3com/Kconfig
+++ b/drivers/net/ethernet/3com/Kconfig
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
--- a/drivers/net/ethernet/adaptec/Kconfig
+++ b/drivers/net/ethernet/adaptec/Kconfig
--- a/drivers/net/ethernet/aeroflex/Kconfig
+++ b/drivers/net/ethernet/aeroflex/Kconfig
--- a/drivers/net/ethernet/agere/Kconfig
+++ b/drivers/net/ethernet/agere/Kconfig
--- a/drivers/net/ethernet/alacritech/Kconfig
+++ b/drivers/net/ethernet/alacritech/Kconfig
--- a/drivers/net/ethernet/allwinner/Kconfig
+++ b/drivers/net/ethernet/allwinner/Kconfig
--- a/drivers/net/ethernet/alteon/Kconfig
+++ b/drivers/net/ethernet/alteon/Kconfig
--- a/drivers/net/ethernet/altera/Kconfig
+++ b/drivers/net/ethernet/altera/Kconfig
--- a/drivers/net/ethernet/amazon/Kconfig
+++ b/drivers/net/ethernet/amazon/Kconfig
--- a/drivers/net/ethernet/amd/Kconfig
+++ b/drivers/net/ethernet/amd/Kconfig
--- a/drivers/net/ethernet/apple/Kconfig
+++ b/drivers/net/ethernet/apple/Kconfig
--- a/drivers/net/ethernet/aquantia/Kconfig
+++ b/drivers/net/ethernet/aquantia/Kconfig
--- a/drivers/net/ethernet/arc/Kconfig
+++ b/drivers/net/ethernet/arc/Kconfig
--- a/drivers/net/ethernet/atheros/Kconfig
+++ b/drivers/net/ethernet/atheros/Kconfig
--- a/drivers/net/ethernet/broadcom/Kconfig
+++ b/drivers/net/ethernet/broadcom/Kconfig
--- a/drivers/net/ethernet/brocade/Kconfig
+++ b/drivers/net/ethernet/brocade/Kconfig
--- a/drivers/net/ethernet/brocade/bna/Kconfig
+++ b/drivers/net/ethernet/brocade/bna/Kconfig
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
--- a/drivers/net/ethernet/cavium/Kconfig
+++ b/drivers/net/ethernet/cavium/Kconfig
--- a/drivers/net/ethernet/chelsio/Kconfig
+++ b/drivers/net/ethernet/chelsio/Kconfig
--- a/drivers/net/ethernet/cirrus/Kconfig
+++ b/drivers/net/ethernet/cirrus/Kconfig
--- a/drivers/net/ethernet/cisco/Kconfig
+++ b/drivers/net/ethernet/cisco/Kconfig
--- a/drivers/net/ethernet/cisco/enic/Kconfig
+++ b/drivers/net/ethernet/cisco/enic/Kconfig
--- a/drivers/net/ethernet/cortina/Kconfig
+++ b/drivers/net/ethernet/cortina/Kconfig
--- a/drivers/net/ethernet/davicom/Kconfig
+++ b/drivers/net/ethernet/davicom/Kconfig
--- a/drivers/net/ethernet/dec/Kconfig
+++ b/drivers/net/ethernet/dec/Kconfig
--- a/drivers/net/ethernet/dec/tulip/Kconfig
+++ b/drivers/net/ethernet/dec/tulip/Kconfig
--- a/drivers/net/ethernet/dlink/Kconfig
+++ b/drivers/net/ethernet/dlink/Kconfig
--- a/drivers/net/ethernet/emulex/Kconfig
+++ b/drivers/net/ethernet/emulex/Kconfig
--- a/drivers/net/ethernet/ezchip/Kconfig
+++ b/drivers/net/ethernet/ezchip/Kconfig
--- a/drivers/net/ethernet/faraday/Kconfig
+++ b/drivers/net/ethernet/faraday/Kconfig
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
--- a/drivers/net/ethernet/freescale/dpaa/Kconfig
+++ b/drivers/net/ethernet/freescale/dpaa/Kconfig
--- a/drivers/net/ethernet/fujitsu/Kconfig
+++ b/drivers/net/ethernet/fujitsu/Kconfig
--- a/drivers/net/ethernet/hisilicon/Kconfig
+++ b/drivers/net/ethernet/hisilicon/Kconfig
--- a/drivers/net/ethernet/huawei/Kconfig
+++ b/drivers/net/ethernet/huawei/Kconfig
--- a/drivers/net/ethernet/huawei/hinic/Kconfig
+++ b/drivers/net/ethernet/huawei/hinic/Kconfig
--- a/drivers/net/ethernet/i825xx/Kconfig
+++ b/drivers/net/ethernet/i825xx/Kconfig
--- a/drivers/net/ethernet/ibm/Kconfig
+++ b/drivers/net/ethernet/ibm/Kconfig
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
--- a/drivers/net/ethernet/marvell/octeontx2/Kconfig
+++ b/drivers/net/ethernet/marvell/octeontx2/Kconfig
--- a/drivers/net/ethernet/mediatek/Kconfig
+++ b/drivers/net/ethernet/mediatek/Kconfig
--- a/drivers/net/ethernet/mellanox/Kconfig
+++ b/drivers/net/ethernet/mellanox/Kconfig
--- a/drivers/net/ethernet/mellanox/mlx4/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx4/Kconfig
--- a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig
--- a/drivers/net/ethernet/mellanox/mlxfw/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlxfw/Kconfig
--- a/drivers/net/ethernet/mellanox/mlxsw/Kconfig
+++ b/drivers/net/ethernet/mellanox/mlxsw/Kconfig
--- a/drivers/net/ethernet/micrel/Kconfig
+++ b/drivers/net/ethernet/micrel/Kconfig
--- a/drivers/net/ethernet/microchip/Kconfig
+++ b/drivers/net/ethernet/microchip/Kconfig
--- a/drivers/net/ethernet/moxa/Kconfig
+++ b/drivers/net/ethernet/moxa/Kconfig
--- a/drivers/net/ethernet/myricom/Kconfig
+++ b/drivers/net/ethernet/myricom/Kconfig
--- a/drivers/net/ethernet/natsemi/Kconfig
+++ b/drivers/net/ethernet/natsemi/Kconfig
--- a/drivers/net/ethernet/neterion/Kconfig
+++ b/drivers/net/ethernet/neterion/Kconfig
--- a/drivers/net/ethernet/netronome/Kconfig
+++ b/drivers/net/ethernet/netronome/Kconfig
--- a/drivers/net/ethernet/nvidia/Kconfig
+++ b/drivers/net/ethernet/nvidia/Kconfig
--- a/drivers/net/ethernet/oki-semi/Kconfig
+++ b/drivers/net/ethernet/oki-semi/Kconfig
--- a/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/Kconfig
--- a/drivers/net/ethernet/packetengines/Kconfig
+++ b/drivers/net/ethernet/packetengines/Kconfig
--- a/drivers/net/ethernet/pasemi/Kconfig
+++ b/drivers/net/ethernet/pasemi/Kconfig
--- a/drivers/net/ethernet/qlogic/Kconfig
+++ b/drivers/net/ethernet/qlogic/Kconfig
--- a/drivers/net/ethernet/qualcomm/Kconfig
+++ b/drivers/net/ethernet/qualcomm/Kconfig
--- a/drivers/net/ethernet/qualcomm/rmnet/Kconfig
+++ b/drivers/net/ethernet/qualcomm/rmnet/Kconfig
--- a/drivers/net/ethernet/rdc/Kconfig
+++ b/drivers/net/ethernet/rdc/Kconfig
--- a/drivers/net/ethernet/realtek/Kconfig
+++ b/drivers/net/ethernet/realtek/Kconfig
--- a/drivers/net/ethernet/renesas/Kconfig
+++ b/drivers/net/ethernet/renesas/Kconfig
--- a/drivers/net/ethernet/rocker/Kconfig
+++ b/drivers/net/ethernet/rocker/Kconfig
--- a/drivers/net/ethernet/samsung/Kconfig
+++ b/drivers/net/ethernet/samsung/Kconfig
--- a/drivers/net/ethernet/seeq/Kconfig
+++ b/drivers/net/ethernet/seeq/Kconfig
--- a/drivers/net/ethernet/sfc/Kconfig
+++ b/drivers/net/ethernet/sfc/Kconfig
--- a/drivers/net/ethernet/sfc/falcon/Kconfig
+++ b/drivers/net/ethernet/sfc/falcon/Kconfig
--- a/drivers/net/ethernet/sgi/Kconfig
+++ b/drivers/net/ethernet/sgi/Kconfig
--- a/drivers/net/ethernet/silan/Kconfig
+++ b/drivers/net/ethernet/silan/Kconfig
--- a/drivers/net/ethernet/sis/Kconfig
+++ b/drivers/net/ethernet/sis/Kconfig
--- a/drivers/net/ethernet/smsc/Kconfig
+++ b/drivers/net/ethernet/smsc/Kconfig
--- a/drivers/net/ethernet/socionext/Kconfig
+++ b/drivers/net/ethernet/socionext/Kconfig
--- a/drivers/net/ethernet/stmicro/Kconfig
+++ b/drivers/net/ethernet/stmicro/Kconfig
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
--- a/drivers/net/ethernet/sun/Kconfig
+++ b/drivers/net/ethernet/sun/Kconfig
--- a/drivers/net/ethernet/synopsys/Kconfig
+++ b/drivers/net/ethernet/synopsys/Kconfig
--- a/drivers/net/ethernet/tehuti/Kconfig
+++ b/drivers/net/ethernet/tehuti/Kconfig
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
--- a/drivers/net/ethernet/toshiba/Kconfig
+++ b/drivers/net/ethernet/toshiba/Kconfig
--- a/drivers/net/ethernet/tundra/Kconfig
+++ b/drivers/net/ethernet/tundra/Kconfig
--- a/drivers/net/ethernet/via/Kconfig
+++ b/drivers/net/ethernet/via/Kconfig
--- a/drivers/net/ethernet/wiznet/Kconfig
+++ b/drivers/net/ethernet/wiznet/Kconfig
--- a/drivers/net/ethernet/xilinx/Kconfig
+++ b/drivers/net/ethernet/xilinx/Kconfig
--- a/drivers/net/ethernet/xircom/Kconfig
+++ b/drivers/net/ethernet/xircom/Kconfig
--- a/drivers/net/ethernet/xscale/Kconfig
+++ b/drivers/net/ethernet/xscale/Kconfig
--- a/drivers/net/fddi/Kconfig
+++ b/drivers/net/fddi/Kconfig
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
--- a/drivers/net/hippi/Kconfig
+++ b/drivers/net/hippi/Kconfig
--- a/drivers/net/ieee802154/Kconfig
+++ b/drivers/net/ieee802154/Kconfig
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
--- a/drivers/net/plip/Kconfig
+++ b/drivers/net/plip/Kconfig
--- a/drivers/net/ppp/Kconfig
+++ b/drivers/net/ppp/Kconfig
--- a/drivers/net/slip/Kconfig
+++ b/drivers/net/slip/Kconfig
--- a/drivers/net/team/Kconfig
+++ b/drivers/net/team/Kconfig
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
--- a/drivers/net/wireless/admtek/Kconfig
+++ b/drivers/net/wireless/admtek/Kconfig
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
--- a/drivers/net/wireless/ath/ar5523/Kconfig
+++ b/drivers/net/wireless/ath/ar5523/Kconfig
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
--- a/drivers/net/wireless/ath/ath11k/Kconfig
+++ b/drivers/net/wireless/ath/ath11k/Kconfig
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
--- a/drivers/net/wireless/ath/ath6kl/Kconfig
+++ b/drivers/net/wireless/ath/ath6kl/Kconfig
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
--- a/drivers/net/wireless/ath/wcn36xx/Kconfig
+++ b/drivers/net/wireless/ath/wcn36xx/Kconfig
--- a/drivers/net/wireless/ath/wil6210/Kconfig
+++ b/drivers/net/wireless/ath/wil6210/Kconfig
--- a/drivers/net/wireless/atmel/Kconfig
+++ b/drivers/net/wireless/atmel/Kconfig
--- a/drivers/net/wireless/broadcom/Kconfig
+++ b/drivers/net/wireless/broadcom/Kconfig
--- a/drivers/net/wireless/broadcom/b43/Kconfig
+++ b/drivers/net/wireless/broadcom/b43/Kconfig
--- a/drivers/net/wireless/broadcom/b43legacy/Kconfig
+++ b/drivers/net/wireless/broadcom/b43legacy/Kconfig
--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
+++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
--- a/drivers/net/wireless/cisco/Kconfig
+++ b/drivers/net/wireless/cisco/Kconfig
--- a/drivers/net/wireless/intel/Kconfig
+++ b/drivers/net/wireless/intel/Kconfig
--- a/drivers/net/wireless/intel/ipw2x00/Kconfig
+++ b/drivers/net/wireless/intel/ipw2x00/Kconfig
--- a/drivers/net/wireless/intel/iwlegacy/Kconfig
+++ b/drivers/net/wireless/intel/iwlegacy/Kconfig
--- a/drivers/net/wireless/intel/iwlwifi/Kconfig
+++ b/drivers/net/wireless/intel/iwlwifi/Kconfig
--- a/drivers/net/wireless/intersil/Kconfig
+++ b/drivers/net/wireless/intersil/Kconfig
--- a/drivers/net/wireless/intersil/hostap/Kconfig
+++ b/drivers/net/wireless/intersil/hostap/Kconfig
--- a/drivers/net/wireless/intersil/orinoco/Kconfig
+++ b/drivers/net/wireless/intersil/orinoco/Kconfig
--- a/drivers/net/wireless/intersil/p54/Kconfig
+++ b/drivers/net/wireless/intersil/p54/Kconfig
--- a/drivers/net/wireless/marvell/Kconfig
+++ b/drivers/net/wireless/marvell/Kconfig
--- a/drivers/net/wireless/marvell/libertas/Kconfig
+++ b/drivers/net/wireless/marvell/libertas/Kconfig
--- a/drivers/net/wireless/marvell/libertas_tf/Kconfig
+++ b/drivers/net/wireless/marvell/libertas_tf/Kconfig
--- a/drivers/net/wireless/marvell/mwifiex/Kconfig
+++ b/drivers/net/wireless/marvell/mwifiex/Kconfig
--- a/drivers/net/wireless/mediatek/Kconfig
+++ b/drivers/net/wireless/mediatek/Kconfig
--- a/drivers/net/wireless/mediatek/mt7601u/Kconfig
+++ b/drivers/net/wireless/mediatek/mt7601u/Kconfig
--- a/drivers/net/wireless/ralink/Kconfig
+++ b/drivers/net/wireless/ralink/Kconfig
--- a/drivers/net/wireless/ralink/rt2x00/Kconfig
+++ b/drivers/net/wireless/ralink/rt2x00/Kconfig
--- a/drivers/net/wireless/realtek/Kconfig
+++ b/drivers/net/wireless/realtek/Kconfig
--- a/drivers/net/wireless/realtek/rtl818x/Kconfig
+++ b/drivers/net/wireless/realtek/rtl818x/Kconfig
--- a/drivers/net/wireless/realtek/rtl8xxxu/Kconfig
+++ b/drivers/net/wireless/realtek/rtl8xxxu/Kconfig
--- a/drivers/net/wireless/realtek/rtlwifi/Kconfig
+++ b/drivers/net/wireless/realtek/rtlwifi/Kconfig
--- a/drivers/net/wireless/rsi/Kconfig
+++ b/drivers/net/wireless/rsi/Kconfig
--- a/drivers/net/wireless/st/Kconfig
+++ b/drivers/net/wireless/st/Kconfig
--- a/drivers/net/wireless/ti/Kconfig
+++ b/drivers/net/wireless/ti/Kconfig
--- a/drivers/net/wireless/ti/wl1251/Kconfig
+++ b/drivers/net/wireless/ti/wl1251/Kconfig
--- a/drivers/net/wireless/ti/wl12xx/Kconfig
+++ b/drivers/net/wireless/ti/wl12xx/Kconfig
--- a/drivers/net/wireless/ti/wl18xx/Kconfig
+++ b/drivers/net/wireless/ti/wl18xx/Kconfig
--- a/drivers/net/wireless/ti/wlcore/Kconfig
+++ b/drivers/net/wireless/ti/wlcore/Kconfig
--- a/drivers/net/wireless/zydas/Kconfig
+++ b/drivers/net/wireless/zydas/Kconfig
--- a/drivers/net/wireless/zydas/zd1211rw/Kconfig
+++ b/drivers/net/wireless/zydas/zd1211rw/Kconfig
--- a/drivers/nfc/fdp/Kconfig
+++ b/drivers/nfc/fdp/Kconfig
--- a/drivers/nfc/microread/Kconfig
+++ b/drivers/nfc/microread/Kconfig
--- a/drivers/nfc/nxp-nci/Kconfig
+++ b/drivers/nfc/nxp-nci/Kconfig
--- a/drivers/nfc/pn533/Kconfig
+++ b/drivers/nfc/pn533/Kconfig
--- a/drivers/nfc/pn544/Kconfig
+++ b/drivers/nfc/pn544/Kconfig
--- a/drivers/nfc/s3fwrn5/Kconfig
+++ b/drivers/nfc/s3fwrn5/Kconfig
--- a/drivers/nfc/st-nci/Kconfig
+++ b/drivers/nfc/st-nci/Kconfig
--- a/drivers/nfc/st21nfca/Kconfig
+++ b/drivers/nfc/st21nfca/Kconfig
--- a/drivers/nvme/host/Kconfig
+++ b/drivers/nvme/host/Kconfig
--- a/drivers/opp/Kconfig
+++ b/drivers/opp/Kconfig
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
--- a/drivers/platform/chrome/Kconfig
+++ b/drivers/platform/chrome/Kconfig
--- a/drivers/platform/mellanox/Kconfig
+++ b/drivers/platform/mellanox/Kconfig
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
--- a/drivers/pnp/Kconfig
+++ b/drivers/pnp/Kconfig
--- a/drivers/pnp/pnpbios/Kconfig
+++ b/drivers/pnp/pnpbios/Kconfig
--- a/drivers/powercap/Kconfig
+++ b/drivers/powercap/Kconfig
--- a/drivers/pps/Kconfig
+++ b/drivers/pps/Kconfig
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
--- a/drivers/rapidio/devices/Kconfig
+++ b/drivers/rapidio/devices/Kconfig
--- a/drivers/rapidio/switches/Kconfig
+++ b/drivers/rapidio/switches/Kconfig
--- a/drivers/sbus/char/Kconfig
+++ b/drivers/sbus/char/Kconfig
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
--- a/drivers/scsi/aic7xxx/Kconfig.aic79xx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic79xx
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
--- a/drivers/scsi/bnx2fc/Kconfig
+++ b/drivers/scsi/bnx2fc/Kconfig
--- a/drivers/scsi/bnx2i/Kconfig
+++ b/drivers/scsi/bnx2i/Kconfig
--- a/drivers/scsi/cxgbi/cxgb3i/Kconfig
+++ b/drivers/scsi/cxgbi/cxgb3i/Kconfig
--- a/drivers/scsi/cxgbi/cxgb4i/Kconfig
+++ b/drivers/scsi/cxgbi/cxgb4i/Kconfig
--- a/drivers/scsi/esas2r/Kconfig
+++ b/drivers/scsi/esas2r/Kconfig
--- a/drivers/scsi/mpt3sas/Kconfig
+++ b/drivers/scsi/mpt3sas/Kconfig
--- a/drivers/scsi/qedf/Kconfig
+++ b/drivers/scsi/qedf/Kconfig
--- a/drivers/scsi/qedi/Kconfig
+++ b/drivers/scsi/qedi/Kconfig
--- a/drivers/scsi/qla2xxx/Kconfig
+++ b/drivers/scsi/qla2xxx/Kconfig
--- a/drivers/scsi/qla4xxx/Kconfig
+++ b/drivers/scsi/qla4xxx/Kconfig
--- a/drivers/scsi/smartpqi/Kconfig
+++ b/drivers/scsi/smartpqi/Kconfig
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
--- a/drivers/sfi/Kconfig
+++ b/drivers/sfi/Kconfig
--- a/drivers/soc/aspeed/Kconfig
+++ b/drivers/soc/aspeed/Kconfig
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
--- a/drivers/staging/greybus/Kconfig
+++ b/drivers/staging/greybus/Kconfig
--- a/drivers/staging/media/atomisp/Kconfig
+++ b/drivers/staging/media/atomisp/Kconfig
--- a/drivers/staging/media/atomisp/i2c/Kconfig
+++ b/drivers/staging/media/atomisp/i2c/Kconfig
--- a/drivers/staging/media/atomisp/i2c/ov5693/Kconfig
+++ b/drivers/staging/media/atomisp/i2c/ov5693/Kconfig
--- a/drivers/staging/most/cdev/Kconfig
+++ b/drivers/staging/most/cdev/Kconfig
--- a/drivers/staging/most/dim2/Kconfig
+++ b/drivers/staging/most/dim2/Kconfig
--- a/drivers/target/iscsi/cxgbit/Kconfig
+++ b/drivers/target/iscsi/cxgbit/Kconfig
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
--- a/drivers/usb/class/Kconfig
+++ b/drivers/usb/class/Kconfig
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
--- a/drivers/usb/image/Kconfig
+++ b/drivers/usb/image/Kconfig
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
--- a/drivers/usb/misc/sisusbvga/Kconfig
+++ b/drivers/usb/misc/sisusbvga/Kconfig
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
--- a/drivers/usb/usbip/Kconfig
+++ b/drivers/usb/usbip/Kconfig
--- a/drivers/vhost/Kconfig
+++ b/drivers/vhost/Kconfig
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
--- a/drivers/video/fbdev/geode/Kconfig
+++ b/drivers/video/fbdev/geode/Kconfig
--- a/drivers/virt/Kconfig
+++ b/drivers/virt/Kconfig
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
--- a/drivers/visorbus/Kconfig
+++ b/drivers/visorbus/Kconfig
--- a/drivers/vme/Kconfig
+++ b/drivers/vme/Kconfig
--- a/drivers/w1/Kconfig
+++ b/drivers/w1/Kconfig
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
--- a/drivers/zorro/Kconfig
+++ b/drivers/zorro/Kconfig
--- a/fs/Kconfig
+++ b/fs/Kconfig
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
--- a/fs/nls/Kconfig
+++ b/fs/nls/Kconfig
--- a/fs/notify/fanotify/Kconfig
+++ b/fs/notify/fanotify/Kconfig
--- a/fs/notify/inotify/Kconfig
+++ b/fs/notify/inotify/Kconfig
--- a/fs/proc/Kconfig
+++ b/fs/proc/Kconfig
--- a/fs/romfs/Kconfig
+++ b/fs/romfs/Kconfig
--- a/init/Kconfig
+++ b/init/Kconfig
--- a/kernel/gcov/Kconfig
+++ b/kernel/gcov/Kconfig
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
--- a/mm/Kconfig.debug
+++ b/mm/Kconfig.debug
--- a/net/6lowpan/Kconfig
+++ b/net/6lowpan/Kconfig
--- a/net/8021q/Kconfig
+++ b/net/8021q/Kconfig
--- a/net/Kconfig
+++ b/net/Kconfig
--- a/net/atm/Kconfig
+++ b/net/atm/Kconfig
--- a/net/bridge/Kconfig
+++ b/net/bridge/Kconfig
--- a/net/caif/Kconfig
+++ b/net/caif/Kconfig
--- a/net/can/Kconfig
+++ b/net/can/Kconfig
--- a/net/dcb/Kconfig
+++ b/net/dcb/Kconfig
--- a/net/dccp/Kconfig
+++ b/net/dccp/Kconfig
--- a/net/dccp/ccids/Kconfig
+++ b/net/dccp/ccids/Kconfig
--- a/net/decnet/Kconfig
+++ b/net/decnet/Kconfig
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
--- a/net/hsr/Kconfig
+++ b/net/hsr/Kconfig
--- a/net/ieee802154/6lowpan/Kconfig
+++ b/net/ieee802154/6lowpan/Kconfig
--- a/net/ieee802154/Kconfig
+++ b/net/ieee802154/Kconfig
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
--- a/net/ipv4/netfilter/Kconfig
+++ b/net/ipv4/netfilter/Kconfig
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
--- a/net/ipv6/netfilter/Kconfig
+++ b/net/ipv6/netfilter/Kconfig
--- a/net/kcm/Kconfig
+++ b/net/kcm/Kconfig
--- a/net/l2tp/Kconfig
+++ b/net/l2tp/Kconfig
--- a/net/l3mdev/Kconfig
+++ b/net/l3mdev/Kconfig
--- a/net/lapb/Kconfig
+++ b/net/lapb/Kconfig
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
--- a/net/mac802154/Kconfig
+++ b/net/mac802154/Kconfig
--- a/net/mpls/Kconfig
+++ b/net/mpls/Kconfig
--- a/net/ncsi/Kconfig
+++ b/net/ncsi/Kconfig
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
--- a/net/netfilter/ipvs/Kconfig
+++ b/net/netfilter/ipvs/Kconfig
--- a/net/netlabel/Kconfig
+++ b/net/netlabel/Kconfig
--- a/net/netlink/Kconfig
+++ b/net/netlink/Kconfig
--- a/net/nfc/hci/Kconfig
+++ b/net/nfc/hci/Kconfig
--- a/net/nsh/Kconfig
+++ b/net/nsh/Kconfig
--- a/net/openvswitch/Kconfig
+++ b/net/openvswitch/Kconfig
--- a/net/packet/Kconfig
+++ b/net/packet/Kconfig
--- a/net/qrtr/Kconfig
+++ b/net/qrtr/Kconfig
--- a/net/rds/Kconfig
+++ b/net/rds/Kconfig
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
--- a/net/sctp/Kconfig
+++ b/net/sctp/Kconfig
--- a/net/smc/Kconfig
+++ b/net/smc/Kconfig
--- a/net/switchdev/Kconfig
+++ b/net/switchdev/Kconfig
--- a/net/tipc/Kconfig
+++ b/net/tipc/Kconfig
--- a/net/tls/Kconfig
+++ b/net/tls/Kconfig
--- a/net/unix/Kconfig
+++ b/net/unix/Kconfig
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
--- a/net/x25/Kconfig
+++ b/net/x25/Kconfig
--- a/net/xfrm/Kconfig
+++ b/net/xfrm/Kconfig
--- a/security/tomoyo/Kconfig
+++ b/security/tomoyo/Kconfig
--- a/sound/aoa/Kconfig
+++ b/sound/aoa/Kconfig
--- a/sound/aoa/codecs/Kconfig
+++ b/sound/aoa/codecs/Kconfig
--- a/sound/aoa/fabrics/Kconfig
+++ b/sound/aoa/fabrics/Kconfig
--- a/sound/aoa/soundbus/Kconfig
+++ b/sound/aoa/soundbus/Kconfig
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
--- a/sound/x86/Kconfig
+++ b/sound/x86/Kconfig