Commit a8a9f3fe authored by Stefan Roese's avatar Stefan Roese Committed by Wolfram Sang

i2c: designware: Add support for 16bit register access

The STM SPEAr platform can only access the i2c controller register
via 16bit read/write functions. This patch adds support to
automatically detect this 16bit access mode.
Signed-off-by: default avatarStefan Roese <sr@denx.de>
Signed-off-by: default avatarWolfram Sang <w.sang@pengutronix.de>
parent 44454baa
......@@ -164,9 +164,15 @@ static char *abort_sources[] = {
u32 dw_readl(struct dw_i2c_dev *dev, int offset)
{
u32 value = readl(dev->base + offset);
u32 value;
if (dev->swab)
if (dev->accessor_flags & ACCESS_16BIT)
value = readw(dev->base + offset) |
(readw(dev->base + offset + 2) << 16);
else
value = readl(dev->base + offset);
if (dev->accessor_flags & ACCESS_SWAP)
return swab32(value);
else
return value;
......@@ -174,10 +180,15 @@ u32 dw_readl(struct dw_i2c_dev *dev, int offset)
void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
{
if (dev->swab)
if (dev->accessor_flags & ACCESS_SWAP)
b = swab32(b);
writel(b, dev->base + offset);
if (dev->accessor_flags & ACCESS_16BIT) {
writew((u16)b, dev->base + offset);
writew((u16)(b >> 16), dev->base + offset + 2);
} else {
writel(b, dev->base + offset);
}
}
static u32
......@@ -251,14 +262,14 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
input_clock_khz = dev->get_clk_rate_khz(dev);
/* Configure register endianess access */
reg = dw_readl(dev, DW_IC_COMP_TYPE);
if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
dev->swab = 1;
reg = DW_IC_COMP_TYPE_VALUE;
}
if (reg != DW_IC_COMP_TYPE_VALUE) {
/* Configure register endianess access */
dev->accessor_flags |= ACCESS_SWAP;
} else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
/* Configure register access mode 16bit */
dev->accessor_flags |= ACCESS_16BIT;
} else if (reg != DW_IC_COMP_TYPE_VALUE) {
dev_err(dev->dev, "Unknown Synopsys component type: "
"0x%08x\n", reg);
return -ENODEV;
......
......@@ -82,7 +82,7 @@ struct dw_i2c_dev {
unsigned int status;
u32 abort_source;
int irq;
int swab;
u32 accessor_flags;
struct i2c_adapter adapter;
u32 functionality;
u32 master_cfg;
......@@ -90,6 +90,9 @@ struct dw_i2c_dev {
unsigned int rx_fifo_depth;
};
#define ACCESS_SWAP 0x00000001
#define ACCESS_16BIT 0x00000002
extern u32 dw_readl(struct dw_i2c_dev *dev, int offset);
extern void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
extern int i2c_dw_init(struct dw_i2c_dev *dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment