Commit a8fc0789 authored by Mike Rapoport's avatar Mike Rapoport Committed by Russell King

[ARM] 4577/1: ITE 8152 PCI bridge support

This patch provides driver for ITE 8152 PCI bridge.
Signed-off-by: default avatarMike Rapoport <mike@compulab.co.il>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 3696a8a4
......@@ -17,3 +17,4 @@ obj-$(CONFIG_SHARPSL_PM) += sharpsl_pm.o
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
obj-$(CONFIG_ARCH_IXP2000) += uengine.o
obj-$(CONFIG_ARCH_IXP23XX) += uengine.o
obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o
This diff is collapsed.
......@@ -279,6 +279,25 @@ static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693);
static void __init pci_fixup_it8152(struct pci_dev *dev)
{
int i;
/* fixup for ITE 8152 devices */
/* FIXME: add defines for class 0x68000 and 0x80103 */
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST ||
dev->class == 0x68000 ||
dev->class == 0x80103) {
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
dev->resource[i].start = 0;
dev->resource[i].end = 0;
dev->resource[i].flags = 0;
}
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8152, pci_fixup_it8152);
void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
{
if (debug_pci)
......@@ -292,9 +311,12 @@ void __devinit pcibios_update_irq(struct pci_dev *dev, int irq)
*/
static inline int pdev_bad_for_parity(struct pci_dev *dev)
{
return (dev->vendor == PCI_VENDOR_ID_INTERG &&
(dev->device == PCI_DEVICE_ID_INTERG_2000 ||
dev->device == PCI_DEVICE_ID_INTERG_2010));
return ((dev->vendor == PCI_VENDOR_ID_INTERG &&
(dev->device == PCI_DEVICE_ID_INTERG_2000 ||
dev->device == PCI_DEVICE_ID_INTERG_2010)) ||
(dev->vendor == PCI_VENDOR_ID_ITE &&
dev->device == PCI_DEVICE_ID_ITE_8152));
}
/*
......
/*
* linux/include/arm/hardware/it8152.h
*
* Copyright Compulab Ltd., 2006,2007
* Mike Rapoport <mike@compulab.co.il>
*
* ITE 8152 companion chip register definitions
*/
#ifndef __ASM_HARDWARE_IT8152_H
#define __ASM_HARDWARE_IT8152_H
extern unsigned long it8152_base_address;
#define IT8152_IO_BASE (it8152_base_address + 0x03e00000)
#define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000)
#define __REG_IT8152(x) (it8152_base_address + (x))
#define IT8152_PCI_CFG_ADDR __REG_IT8152(0x3f00800)
#define IT8152_PCI_CFG_DATA __REG_IT8152(0x3f00804)
#define IT8152_INTC_LDCNIRR __REG_IT8152(0x3f00300)
#define IT8152_INTC_LDPNIRR __REG_IT8152(0x3f00304)
#define IT8152_INTC_LDCNIMR __REG_IT8152(0x3f00308)
#define IT8152_INTC_LDPNIMR __REG_IT8152(0x3f0030C)
#define IT8152_INTC_LDNITR __REG_IT8152(0x3f00310)
#define IT8152_INTC_LDNIAR __REG_IT8152(0x3f00314)
#define IT8152_INTC_LPCNIRR __REG_IT8152(0x3f00320)
#define IT8152_INTC_LPPNIRR __REG_IT8152(0x3f00324)
#define IT8152_INTC_LPCNIMR __REG_IT8152(0x3f00328)
#define IT8152_INTC_LPPNIMR __REG_IT8152(0x3f0032C)
#define IT8152_INTC_LPNITR __REG_IT8152(0x3f00330)
#define IT8152_INTC_LPNIAR __REG_IT8152(0x3f00334)
#define IT8152_INTC_PDCNIRR __REG_IT8152(0x3f00340)
#define IT8152_INTC_PDPNIRR __REG_IT8152(0x3f00344)
#define IT8152_INTC_PDCNIMR __REG_IT8152(0x3f00348)
#define IT8152_INTC_PDPNIMR __REG_IT8152(0x3f0034C)
#define IT8152_INTC_PDNITR __REG_IT8152(0x3f00350)
#define IT8152_INTC_PDNIAR __REG_IT8152(0x3f00354)
#define IT8152_INTC_INTC_TYPER __REG_IT8152(0x3f003FC)
#define IT8152_GPIO_GPDR __REG_IT8152(0x3f00500)
/*
Interrup contoler per register summary:
---------------------------------------
LCDNIRR:
IT8152_LD_IRQ(8) PCICLK stop
IT8152_LD_IRQ(7) MCLK ready
IT8152_LD_IRQ(6) s/w
IT8152_LD_IRQ(5) UART
IT8152_LD_IRQ(4) GPIO
IT8152_LD_IRQ(3) TIMER 4
IT8152_LD_IRQ(2) TIMER 3
IT8152_LD_IRQ(1) TIMER 2
IT8152_LD_IRQ(0) TIMER 1
LPCNIRR:
IT8152_LP_IRQ(x) serial IRQ x
PCIDNIRR:
IT8152_PD_IRQ(14) PCISERR
IT8152_PD_IRQ(13) CPU/PCI bridge target abort (h2pTADR)
IT8152_PD_IRQ(12) CPU/PCI bridge master abort (h2pMADR)
IT8152_PD_IRQ(11) PCI INTD
IT8152_PD_IRQ(10) PCI INTC
IT8152_PD_IRQ(9) PCI INTB
IT8152_PD_IRQ(8) PCI INTA
IT8152_PD_IRQ(7) serial INTD
IT8152_PD_IRQ(6) serial INTC
IT8152_PD_IRQ(5) serial INTB
IT8152_PD_IRQ(4) serial INTA
IT8152_PD_IRQ(3) serial IRQ IOCHK (IOCHKR)
IT8152_PD_IRQ(2) chaining DMA (CDMAR)
IT8152_PD_IRQ(1) USB (USBR)
IT8152_PD_IRQ(0) Audio controller (ACR)
*/
/* frequently used interrupts */
#define IT8152_PCISERR IT8152_PD_IRQ(14)
#define IT8152_H2PTADR IT8152_PD_IRQ(13)
#define IT8152_H2PMAR IT8152_PD_IRQ(12)
#define IT8152_PCI_INTD IT8152_PD_IRQ(11)
#define IT8152_PCI_INTC IT8152_PD_IRQ(10)
#define IT8152_PCI_INTB IT8152_PD_IRQ(9)
#define IT8152_PCI_INTA IT8152_PD_IRQ(8)
#define IT8152_CDMA_INT IT8152_PD_IRQ(2)
#define IT8152_USB_INT IT8152_PD_IRQ(1)
#define IT8152_AUDIO_INT IT8152_PD_IRQ(0)
struct pci_dev;
struct pci_sys_data;
extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc);
extern void it8152_init_irq(void);
extern int it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
extern int it8152_pci_setup(int nr, struct pci_sys_data *sys);
extern struct pci_bus *it8152_pci_scan_bus(int nr, struct pci_sys_data *sys);
#endif /* __ASM_HARDWARE_IT8152_H */
......@@ -8,10 +8,17 @@
#define pcibios_scan_all_fns(a, b) 0
#ifdef CONFIG_PCI_HOST_ITE8152
/* ITE bridge requires setting latency timer to avoid early bus access
termination by PIC bus mater devices
*/
extern void pcibios_set_master(struct pci_dev *dev);
#else
static inline void pcibios_set_master(struct pci_dev *dev)
{
/* No special bus mastering setup handling */
}
#endif
static inline void pcibios_penalize_isa_irq(int irq, int active)
{
......
......@@ -1631,6 +1631,7 @@
#define PCI_DEVICE_ID_ITE_8211 0x8211
#define PCI_DEVICE_ID_ITE_8212 0x8212
#define PCI_DEVICE_ID_ITE_8213 0x8213
#define PCI_DEVICE_ID_ITE_8152 0x8152
#define PCI_DEVICE_ID_ITE_8872 0x8872
#define PCI_DEVICE_ID_ITE_IT8330G_0 0xe886
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment