Commit a9105cb5 authored by Archit Taneja's avatar Archit Taneja Committed by Tomi Valkeinen

OMAPDSS: Remove passive matrix LCD support (part 4)

Remove configuration of Ac-bias pins

Ac-bias pins need to be configured only for passive matrix displays. Remove
acbi and acb fields in omap_dss_device and their configuration in panel
drivers. Don't program these fields in DISP_POL_FREQo register any more.

The panel driver for sharp-ls037v7dw01, and the panel config for
Innolux AT070TN8 in generic dpi panel driver set acb to a non zero value. This
is most likely carried over from the old omapfb driver which supported passive
matrix displays.

Cc: Thomas Weber <weber@corscience.de>
Signed-off-by: default avatarArchit Taneja <archit@ti.com>
parent d21f43bc
......@@ -40,10 +40,6 @@
struct panel_config {
struct omap_video_timings timings;
int acbi; /* ac-bias pin transitions per interrupt */
/* Unit: line clocks */
int acb; /* ac-bias pin frequency */
enum omap_panel_config config;
int power_on_delay;
......@@ -74,8 +70,6 @@ static struct panel_config generic_dpi_panels[] = {
.vfp = 3,
.vbp = 2,
},
.acbi = 0x0,
.acb = 0x0,
.config = OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS |
OMAP_DSS_LCD_IEO,
.power_on_delay = 50,
......@@ -99,8 +93,6 @@ static struct panel_config generic_dpi_panels[] = {
.vfp = 1,
.vbp = 1,
},
.acbi = 0x0,
.acb = 0x28,
.config = OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS,
.power_on_delay = 50,
.power_off_delay = 100,
......@@ -123,8 +115,6 @@ static struct panel_config generic_dpi_panels[] = {
.vsw = 2,
.vbp = 2,
},
.acbi = 0x0,
.acb = 0x0,
.config = OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS |
OMAP_DSS_LCD_IPC |
OMAP_DSS_LCD_ONOFF,
......@@ -149,8 +139,6 @@ static struct panel_config generic_dpi_panels[] = {
.vsw = 10,
.vbp = 12 - 10,
},
.acbi = 0x0,
.acb = 0x0,
.config = OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS,
.power_on_delay = 0,
.power_off_delay = 0,
......@@ -173,8 +161,6 @@ static struct panel_config generic_dpi_panels[] = {
.vfp = 4,
.vbp = 11,
},
.acbi = 0x0,
.acb = 0x0,
.config = OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS,
.power_on_delay = 0,
.power_off_delay = 0,
......@@ -197,8 +183,6 @@ static struct panel_config generic_dpi_panels[] = {
.vfp = 2,
.vbp = 2,
},
.acbi = 0x0,
.acb = 0x0,
.config = OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS |
OMAP_DSS_LCD_IEO,
.power_on_delay = 0,
......@@ -222,8 +206,6 @@ static struct panel_config generic_dpi_panels[] = {
.vfp = 12,
.vbp = 25,
},
.acbi = 0x0,
.acb = 0x28,
.config = OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS,
.power_on_delay = 0,
.power_off_delay = 0,
......@@ -325,8 +307,6 @@ static struct panel_config generic_dpi_panels[] = {
.vfp = 1,
.vbp = 1,
},
.acbi = 0x0,
.acb = 0x0,
.config = OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS |
OMAP_DSS_LCD_IPC,
.power_on_delay = 0,
......@@ -369,7 +349,6 @@ static struct panel_config generic_dpi_panels[] = {
.vfp = 12,
.vbp = 23,
},
.acb = 0x0,
.config = OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS |
OMAP_DSS_LCD_IEO,
......@@ -562,8 +541,6 @@ static int generic_dpi_panel_probe(struct omap_dss_device *dssdev)
dssdev->panel.config = panel_config->config;
dssdev->panel.timings = panel_config->timings;
dssdev->panel.acb = panel_config->acb;
dssdev->panel.acbi = panel_config->acbi;
drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL);
if (!drv_data)
......
......@@ -416,7 +416,6 @@ static int picodlp_panel_probe(struct omap_dss_device *dssdev)
dssdev->panel.config = OMAP_DSS_LCD_ONOFF | OMAP_DSS_LCD_IHS |
OMAP_DSS_LCD_IVS;
dssdev->panel.acb = 0x0;
dssdev->panel.timings = pico_ls_timings;
picod = kzalloc(sizeof(struct picodlp_data), GFP_KERNEL);
......
......@@ -87,7 +87,6 @@ static int sharp_ls_panel_probe(struct omap_dss_device *dssdev)
int r;
dssdev->panel.config = OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS;
dssdev->panel.acb = 0x28;
dssdev->panel.timings = sharp_ls_timings;
sd = kzalloc(sizeof(*sd), GFP_KERNEL);
......
......@@ -3117,13 +3117,12 @@ static void dispc_dump_regs(struct seq_file *s)
}
static void _dispc_mgr_set_pol_freq(enum omap_channel channel, bool onoff,
bool rf, bool ieo, bool ipc, bool ihs, bool ivs, u8 acbi,
u8 acb)
bool rf, bool ieo, bool ipc, bool ihs, bool ivs)
{
u32 l = 0;
DSSDBG("onoff %d rf %d ieo %d ipc %d ihs %d ivs %d acbi %d acb %d\n",
onoff, rf, ieo, ipc, ihs, ivs, acbi, acb);
DSSDBG("onoff %d rf %d ieo %d ipc %d ihs %d ivs %d\n",
onoff, rf, ieo, ipc, ihs, ivs);
l |= FLD_VAL(onoff, 17, 17);
l |= FLD_VAL(rf, 16, 16);
......@@ -3131,22 +3130,19 @@ static void _dispc_mgr_set_pol_freq(enum omap_channel channel, bool onoff,
l |= FLD_VAL(ipc, 14, 14);
l |= FLD_VAL(ihs, 13, 13);
l |= FLD_VAL(ivs, 12, 12);
l |= FLD_VAL(acbi, 11, 8);
l |= FLD_VAL(acb, 7, 0);
dispc_write_reg(DISPC_POL_FREQ(channel), l);
}
void dispc_mgr_set_pol_freq(enum omap_channel channel,
enum omap_panel_config config, u8 acbi, u8 acb)
enum omap_panel_config config)
{
_dispc_mgr_set_pol_freq(channel, (config & OMAP_DSS_LCD_ONOFF) != 0,
(config & OMAP_DSS_LCD_RF) != 0,
(config & OMAP_DSS_LCD_IEO) != 0,
(config & OMAP_DSS_LCD_IPC) != 0,
(config & OMAP_DSS_LCD_IHS) != 0,
(config & OMAP_DSS_LCD_IVS) != 0,
acbi, acb);
(config & OMAP_DSS_LCD_IVS) != 0);
}
/* with fck as input clock rate, find dispc dividers that produce req_pck */
......
......@@ -131,8 +131,7 @@ static int dpi_set_mode(struct omap_dss_device *dssdev)
unsigned long pck;
int r = 0;
dispc_mgr_set_pol_freq(dssdev->manager->id, dssdev->panel.config,
dssdev->panel.acbi, dssdev->panel.acb);
dispc_mgr_set_pol_freq(dssdev->manager->id, dssdev->panel.config);
if (dpi_use_dsi_pll(dssdev))
r = dpi_set_dsi_clk(dssdev, t->pixel_clock * 1000, &fck,
......
......@@ -424,7 +424,7 @@ void dispc_mgr_set_lcd_type_tft(enum omap_channel channel);
void dispc_mgr_set_timings(enum omap_channel channel,
struct omap_video_timings *timings);
void dispc_mgr_set_pol_freq(enum omap_channel channel,
enum omap_panel_config config, u8 acbi, u8 acb);
enum omap_panel_config config);
unsigned long dispc_mgr_lclk_rate(enum omap_channel channel);
unsigned long dispc_mgr_pclk_rate(enum omap_channel channel);
unsigned long dispc_core_clk_rate(void);
......
......@@ -80,8 +80,7 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
/* 15.5.9.1.2 */
dssdev->panel.config |= OMAP_DSS_LCD_RF | OMAP_DSS_LCD_ONOFF;
dispc_mgr_set_pol_freq(dssdev->manager->id, dssdev->panel.config,
dssdev->panel.acbi, dssdev->panel.acb);
dispc_mgr_set_pol_freq(dssdev->manager->id, dssdev->panel.config);
r = dss_calc_clock_div(t->pixel_clock * 1000, &dss_cinfo, &dispc_cinfo);
if (r)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment